Pasar al contenido principal

MODELACION ESTOCASTICA INVERSA FUERA DE LO NORMAL

CGL2011-23295

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling transient groundwater flow by coupling ensemble Kalman filtering and upscaling

  • Li ., Liangping
  • Zhou ., Haiyan
  • Franssen, HJH
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
The ensemble Kalman filter (EnKF) is coupled with upscaling to build an aquifer model at a coarser scale than the scale at which the conditioning data (conductivity and piezometric head) had been taken for the purpose of inverse modeling. Building an aquifer model at the support scale of observations is most often impractical since this would imply numerical models with many millions of cells. If, in addition, an uncertainty analysis is required involving some kind of Monte Carlo approach, the task becomes impossible. For this reason, a methodology has been developed that will use the conductivity data at the scale at which they were collected to build a model at a (much) coarser scale suitable for the inverse modeling of groundwater flow and mass transport. It proceeds as follows: (1) Generate an ensemble of realizations of conductivities conditioned to the conductivity data at the same scale at which conductivities were collected. (2) Upscale each realization onto a coarse discretization; on these coarse realizations, conductivities will become tensorial in nature with arbitrary orientations of their principal components. (3) Apply the EnKF to the ensemble of coarse conductivity upscaled realizations in order to condition the realizations to the measured piezometric head data. The proposed approach addresses the problem of how to deal with tensorial parameters, at a coarse scale, in ensemble Kalman filtering while maintaining the conditioning to the fine-scale hydraulic conductivity measurements. We demonstrate our approach in the framework of a synthetic worth-of-data exercise, in which the relevance of conditioning to conductivities, piezometric heads, or both is analyzed., The authors acknowledge Wolfgang Nowak and three anonymous reviewers for their comments on the previous versions of the manuscript, which helped substantially to improve it. The authors gratefully acknowledge the financial support by the Spanish Ministry of Science and Innovation through project CGL2011-23295. Extra travel grants awarded to the first and second authors by the Ministry of Education (Spain) are also acknowledged. The second author also acknowledges financial support from the China Scholarship Council.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Paralellized ensemble Kalman filter for hydraulic conductivity characterization

  • Xu, Teng
  • Li ., Liangping
  • Zhou ., Haiyan
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] The ensemble Kalman filter (EnKF) is nowadays recognized as an excellent inverse method for hydraulic conductivity characterization using transient piezometric head data. Its implementation is well suited for a parallel computing environment. A parallel code has been designed that uses parallelization both in the forecast step and in the analysis step. In the forecast step, each member of the ensemble is sent to a different processor, while in the analysis step, the computations of the covariances are distributed between the different processors. An important aspect of the parallelization is to limit as much as possible the communication between the processors in order to maximize execution time reduction. Four tests are carried out to evaluate the performance of the parallelization with different ensemble and model sizes. The results show the savings provided by the parallel EnKF, especially for a large number of ensemble realizations. (c) 2012 Elsevier Ltd. All rights reserved., The first author acknowledges the financial support from China Scholarship Council (CSC). Financial support to carry out this work was also received from the Spanish Ministry of Science and Innovation through project CGL2011-23295, and from the Universitat Politecnica de Valencia through project PERFORA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Inverse Methods in Hydrogeology: Evolution and Recent Trends

  • Zhou, Haiyan
  • Li, Liangping
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] Parameter identification is an essential step in constructing a groundwater model. The process of recognizing model parameter values by conditioning on observed data of the state variable is referred to as the inverse problem. A series of inverse methods has been proposed to solve the inverse problem, ranging from trial-and-error manual calibration to the current complex automatic data assimilation algorithms. This paper does not attempt to be another overview paper on inverse models, but rather to analyze and track the evolution of the inverse methods over the last decades, mostly within the realm of hydrogeology, revealing their transformation, motivation and recent trends. Issues confronted by the inverse problem, such as dealing with multiGaussianity and whether or not to preserve the prior statistics are discussed. (C) 2013 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge the financial support by the Spanish Ministry of Science and Innovation through project CGL2011-23295. We would like to thank Dr. Alberto Guadagnini (Politecnico di Milano, Italy) for his comments during the reviewing process, which helped improving the final paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A pattern-search-based inverse method

  • Zhou ., Haiyan
  • Li ., Liangping
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
Uncertainty in model predictions is caused to a large extent by the uncertainty in model parameters, while the identification of model parameters is demanding because of the inherent heterogeneity of the aquifer. A variety of inverse methods has been proposed for parameter identification. In this paper we present a novel inverse method to constrain the model parameters (hydraulic conductivities) to the observed state data (hydraulic heads). In the method proposed we build a conditioning pattern consisting of simulated model parameters and observed flow data. The unknown parameter values are simulated by pattern searching through an ensemble of realizations rather than optimizing an objective function. The model parameters do not necessarily follow a multi-Gaussian distribution, and the nonlinear relationship between the parameter and the response is captured by the multipoint pattern matching. The algorithm is evaluated in two synthetic bimodal aquifers. The proposed method is able to reproduce the main structure of the reference fields, and the performance of the updated model in predicting flow and transport is improved compared with that of the prior model., The authors gratefully acknowledge the financial support from the Ministry of Science and Innovation, project CGL2011-23295. The first author also acknowledges the scholarship provided by the China Scholarship Council (CSC [2007] 3020). The authors would like to thank Gregoire Mariethoz (University of New South Wales) and Philippe Renard (University of Neuchatel) for their enthusiastic help in answering questions about the direct sampling algorithm. Gregoire Mariethoz and two anonymous reviewers are also thanked for their comments during the reviewing process, which helped improving the final paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimal numerical design of bucket elevators using discontinuous deformation analysis

  • Pérez Aparicio, José Luis
  • Bravo, R.
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
Bucket elevators are efficient machines to transport granular materials in industrial and civil engineering applications. These materials are composed of hundreds, thousands or even more particles, the global behavior of which is defined by contact interactions. The first attempts to analyze the transportation of granular materials were treated by very simple continuum methods that do not take into account these interactions, producing simulations that do not fit the experimental results accurately. Given the internal discontinuity nature of granular media, it is reasonable to use numerical methods to model their behavior, such as discontinuous deformation analysis (DDA)-a member of the discrete element method family that started to be used in the 90s to analyze similar problems. The version of DDA used in the current work treats grains as rigid circular particles with friction, damping and eventually cohesion with the objective of simulating and analyzing in detail the discharge of granular materials with bucket elevators. A deterministic computer code has been implemented and validated against simplified analytical formulae and experimental results taken from the literature. This computer code is then used to obtain optimum two-dimensional bucket geometries under specific working conditions. The optimization aims to maximize transport distance and to minimize remaining material, taking into account bucket velocity and the properties of the grains. The resulting geometries are discussed and compared against standard designs., J.L. Perez-Aparicio, R. Bravo were partially supported by the MFOM I+D (2004/38), both by MICIIN #BIA 2008-00522 and the first also by Polytechnic University of Valencia under grant PAID 05-10-2674. J.J. Gomez-Hernandez was partially supported by MICIIN #CGL 2011-23295.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterizing curvilinear features using the localized normal-score ensemble Kalman filter

  • Zhou ., Haiyan
  • Li ., Liangping
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
The localized normal-score ensemble Kalman filter is shown to work for the characterization of non-multi-Gaussian distributed hydraulic conductivities by assimilating state observation data. The influence of type of flow regime, number of observation piezometers, and the prior model structure are evaluated in a synthetic aquifer. Steady-state observation data are not sufficient to identify the conductivity channels. Transient-state data are necessary for a good characterization of the hydraulic conductivity curvilinear patterns. Such characterization is very good with a dense network of observation data, and it deteriorates as the number of observation piezometers decreases. It is also remarkable that, even when the prior model structure is wrong, the localized normal-score ensemble Kalman filter can produce acceptable results for a sufficiently dense observation network. Copyright © 2012 Haiyan Zhou et al., The authors gratefully acknowledge the financial support by the Spanish Ministry of Science and Innovation through project CGL2011-23295. The authors want to thank the reviewer for the comments which help improving the quality of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A local global pattern matching method for subsurface stochastic inverse modeling

  • Li ., Liangping
  • Srinivasan, Sanjay
  • Zhou, Haiyan
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
Inverse modeling is an essential step for reliable modeling of subsurface flow and transport, which is important for groundwater resource management and aquifer remediation. Multiple-point statistics (MPS) based reservoir modeling algorithms, beyond traditional two-point statistics-based methods, offer an alternative to simulate complex geological features and patterns, conditioning to observed conductivity data. Parameter estimation, within the framework of MPS, for the characterization of conductivity fields using measured dynamic data such as piezometric head data, remains one of the most challenging tasks in geologic modeling. We propose a new local global pattern matching method to integrate dynamic data into geological models. The local pattern is composed of conductivity and head values that are sampled from joint training images comprising of geological models and the corresponding simulated piezometric heads. Subsequently, a global constraint is enforced on the simulated geologic models in order to match the measured head data. The method is sequential in time, and as new piezometric head become available, the training images are updated for the purpose of reducing the computational cost of pattern matching. As a result, the final suite of models preserve the geologic features as well as match the dynamic data. This local global pattern matching method is demonstrated for simulating a two-dimensional, bimodally-distributed heterogeneous conductivity field. The results indicate that the characterization of conductivity as well as flow and transport predictions are improved when the piezometric head data are integrated into the geological modeling. (C) 2015 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge the financial support by DOE through projects DE-FE0004962 and DE-SC0001114. The last author acknowledges the support of the Spanish Ministry of Economy and Competitiveness through project CGL2011-23295. We greatly thank the three anonymous reviewers for their comments, which substantially improved the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical sedimentation particle-size analysis using the Discrete Element Method

  • Bravo, R.
  • Pérez Aparicio, José Luis
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
Sedimentation tests are widely used to determine the particle size distribution of a granular sample. In this work, the Discrete Element Method interacts with the simulation of flow using the well known one-way- coupling method, a computationally affordable approach for the time-consuming numerical simulation of the hydrometer, buoyancy and pipette sedimentation tests. These tests are used in the laboratory to determine the particle-size distribution of fine-grained aggregates. Five samples with different particle-size distributions are modeled by about six million rigid spheres pro- jected on two-dimensions, with diameters ranging from 2.5 × 10−6 m to 70 × 10−6 m, forming a water sus- pension in a sedimentation cylinder. DEM simulates the particle s movement considering laminar flow in- teractions of buoyant, drag and lubrication forces. The simulation provides the temporal/spatial distributions of densities and concentrations of the suspension. The numerical simulations cannot replace the laboratory tests since they need the final granulometry as initial data, but, as the results show, these simulations can identify the strong and weak points of each method and eventually recommend useful variations and draw conclusions on their validity, aspects very difficult to achieve in the laboratory., R. Bravo and J.L. Perez-Aparicio were partially supported by the project MICIIN #BIA-2012-32918. The second researcher used the grant GV BEST/2014/232 for the completion of this work. J. Jaime Gomez-Hernandez acknowledges the financial aid from project MINECO CGL2011-23295.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Pilot Point Guided Pattern Matching Approach to Integrate Dynamic Data into Geological Modeling

  • Li, Liangping
  • Srinivasan, Sanjay
  • Zhou, Haiyan
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
Methods based on multiple-point statistics (MPS) have been routinely used to characterize complex geological formations in the last decade. These methods use the available static data (for example, measured conductivities) for conditioning. Integrating dynamic data (for example, measured transient piezometric head data) into the same framework is challenging because of the complex non-linear relationship between the dynamic response and geology. The Ensemble PATtern (EnPAT) search method was recently developed as a promising technique to handle this problem. In this approach, a pattern is postulated to be composed of both parameter and state variables, and then, parameter values are sequentially (point-wise) simulated by directly sampling the matched pattern from an ensemble of training images of both geologic parameters and state variables. As a consequence, the updated ensemble of realizations of the geological parameters preserve curvilinear structures (i.e., non-multiGaussanity) as well as the complex relationship between static and dynamic data. Moreover, the uncertainty of flow and transport predictions can be assessed using the updated ensemble of geological models. In this work, we further modify the EnPAT method by introducing the pilot-point concept into the algorithm. More specifically, the parameter values at a set of randomly selected pilot point locations are simulated by the pattern searching procedure, and then a faster MPS method is used to complete the simulation by conditioning to the previously simulated pilot point values. This pilot point guided MPS implementation results in lower computational cost and more accurate inference of the parameter field. In addition, in some situations where there is sparsity of measured geologic static data, the EnPAT algorithm is extended to work only with the dynamic data. We employed a synthetic example to demonstrate the effectiveness of pilot points in the implementation of EnPAT, and also the capability of dynamic data to identify complex geologic structures when measured conductivity data are not available., The first three authors gratefully acknowledge the financial support by DOE through project DE-FE0004962. The fourth author acknowledges the financial support by the Spanish Ministry of Science and Innovation through project CGL2011-23295. The authors also wish to thank Wolfgang Nowak as well as two anonymous reviewers for their comments, which helped improving the final version of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Power of Transient Piezometric Head Data in Inverse Modeling: An Application of the Localized Normal-score EnKF with Covariance Inflation in a Heterogenous Bimodal Hydraulic Conductivity Field

  • Xu, Teng
  • Zhou, Haiyan
  • Li, Liangping
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
The localized normal-score ensemble Kalman filter (NS-EnKF) coupled with covariance inflation is used to characterize the spatial variability of a channelized bimodal hydraulic conductivity field, for which the only existing prior information about conductivity is its univariate marginal distribution. We demonstrate that we can retrieve the main patterns of the reference field by assimilating a sufficient number of piezometric observations using the NS-EnKF. The possibility of characterizing the conductivity spatial variability using only piezometric head data shows the importance of accounting for these data in inverse modeling., The first author acknowledges the financial support from the China Scholarship Council (CSC). Financial support to carry out this work was also received from the Spanish Ministry of Science and Innovation through project CGL2011-23295.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Jointly mapping hydraulic conductivity and porosity by assimilating concentration data via ensemble Kalman filter

  • Li, Liangping
  • Zhou, Haiyan
  • Hendricks-Franssen, Hendrikus Johannes
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] Real-time data from on-line sensors offer the possibility to update environmental simulation models in real-time. Information from on-line sensors concerning contaminant concentrations in groundwater allow for the real-time characterization and control of a contaminant plume. In this paper it is proposed to use the CPU-efficient Ensemble Kalman Filter (EnKF) method, a data assimilation algorithm, for jointly updating the flow and transport parameters (hydraulic conductivity and porosity) and state variables (piezometric head and concentration) of a groundwater flow and contaminant transport problem. A synthetic experiment is used to demonstrate the capability of the EnKF to estimate hydraulic conductivity and porosity by assimilating dynamic head and multiple concentration data in a transient flow and transport model. In this work the worth of hydraulic conductivity, porosity, piezometric head, and concentration data is analyzed in the context of aquifer characterization and prediction uncertainty reduction. The results indicate that the characterization of the hydraulic conductivity and porosity fields is continuously improved as more data are assimilated. Also, groundwater flow and mass transport predictions are improved as more and different types of data are assimilated. The beneficial impact of accounting for multiple concentration data is patent. © 2012 Elsevier B.V., The authors gratefully acknowledge the financial support by ENRESA (Project 0079000029) and the Spanish Ministry of Science and Innovation (Project CGL2011-23295). Extra travel Grants awarded to the first and second author by the Ministry of Education (Spain) are also acknowledged. Dr. Jichun Wu and an anonymous reviewer are grateful acknowledged for their comments which helped improving the final version of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simultaneous estimation of both geologic and reservoir state variables within an ensemble-based multiple-point statistic framework

  • Li, Liangping
  • Srinivasan, Sanjay
  • Zhou, Haiyan
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
The first three authors gratefully acknowledge the financial support by US Department of Energy through project DE-FE0004962. The fourth author acknowledges the financial support by Spanish Ministry of Science and Innovation through project CGL2011-23295. The authors also wish to thank the guest editors, Philippe Renard and Gregoire Mariethoz, as well as three anonymous reviewers for their comments, which substantially helped improving the final version of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two-point or multiple-point statistics? A comparison between the ensemble Kalman filtering and the ensemble pattern matching inverse methods

  • Li, Liangping
  • Srinivasan, Sanjay
  • Zhou, Haiyan
  • Gomez-Hernandez, J. Jaime
The Ensemble Kalman Filter (EnKF) has been commonly used to assimilate real time dynamic data into geologic models over the past decade. Despite its various advantages such as computational efficiency and its capability to handle multiple sources of uncertainty, the EnKF may not be used to reliably update models that are characterized by curvilinear geometries such as fluvial deposits where the permeable channels play a crucial role in the prediction of solute transport. It is well-known that the EnKF performs optimally for updating multi-Gaussian distributed fields, basically because it uses two-point statistics (i.e., covariances) to represent the relationship between the model parameters and between the model parameters and the observed response, and this is the only statistic necessary to fully characterize a multiGaussian distribution. The Ensemble PATtern matching (EnPAT) is an alternative ensemble based method that shows significant potential to condition complex geology such as channelized aquifers to dynamic data. The EnPAT is an evolution of the EnKF, replacing, in the analysis step, two-point statistics with multiple-point statistics. The advantages of EnPAT reside in its capability to honor the complex spatial connectivity of geologic structures as well as the measured static and dynamic data. In this work, the performance of the classical EnKF and the EnPAT are compared for modeling a synthetic channelized aquifer. The results reveal that the EnPAT yields a better prediction of transport characteristics than the EnKF because it characterizes the conductivity heterogeneity better. Issues such as uncertainty of multiple variables and the effect of measurement errors on EnPAT results will be discussed. © 2015 Elsevier Ltd. All rights reserved., The first three authors gratefully acknowledge the financial support by the U.S. Department of Energy through project DE-FE0004962. The fourth author acknowledges the financial support by the Spanish Ministry of Economy and Competitiveness through project CGL2011-23295. We thank the guest editor Prof. Dr. Harrie-Jan Hendricks Franssen, as well as the reviewer Prof. Alberto Guadagnini and two anonymous reviewers for their comments, which substantially improved the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Groundwater flow inverse modeling in non-MultiGaussian media: Performance assessment of the normal-score Ensemble Kalman Filter

  • Li, Liangping
  • Zhou, Haiyan
  • Hendricks-Franssen, Hendrikus Johannes
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
[EN] The normal-score ensemble Kalman filter (NS-EnKF) is tested on a synthetic aquifer characterized by the presence of channels with a bimodal distribution of its hydraulic conductivities. This is a clear example of an aquifer that cannot be characterized by a multiGaussian distribution. Fourteen scenarios are analyzed which differ among them in one or various of the following aspects: the prior random function model, the boundary conditions of the flow problem, the number of piezometers used in the assimilation process, or the use of covariance localization in the implementation of the Kalman filter. The performance of the NS-EnKF is evaluated through the ensemble mean and variance maps, the connectivity patterns of the individual conductivity realizations and the degree of reproduction of the piezometric heads. The results show that (i) the localized NS-EnKF can characterize the non-multiGaussian underlying hydraulic distribution even when an erroneous prior random function model is used, (ii) localization plays an important role to prevent filter inbreeding and results in a better logconductivity characterization, and (iii) the NS-EnKF works equally well under very different flow configurations. © Author(s) 2012., The authors gratefully acknowledge the financial support by the Spanish Ministry of Science and Innovation through project CGL2011-23295. The two anonymous reviewers are gratefully acknowledged for their comments which helped improving the final version of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Inverse sequential simulation: A new approach for the characterization of hydraulic conductivities demonstrated on a non-Gaussian field

  • Xu, Teng
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
Inverse sequential simulation (iSS) is a new inverse modeling approach for the characterization of hydraulic conductivity fields based on sequential simulation. It is described and demonstrated in a synthetic aquifer with non-Gaussian spatial features, and compared against the normal-score ensemble Kalman filter (NS-EnKF). The new approach uses the sequential simulation paradigm to generate realizations borrowing from the ensemble Kalman filter the idea of using the experimental nonstationary cross-covariance between conductivities and piezometric heads computed on an ensemble of realizations. The resulting approach is fully capable of retrieving the non-Gaussian patterns of the reference field after conditioning on the piezometric heads with results comparable of those obtained by the NS-EnKF., The first author acknowledges the financial support from the China Scholarship Council (CSC). Financial support to carry out this work was also received from the Spanish Ministry of Economy and Competitiveness through project CGL2011-23295. We also want to thank Associate Editor Alberto Bellin and three anonymous reviewers for their valuable and constructive comments. All data used in this analysis are available from the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pattern Recognition in a Bimodal Aquifer Using the Normal-Score Ensemble Kalman Filter

  • Zhou, Haiyan
  • Li, Liangping
  • Hendricks Franssen, Harrie-Jan
  • Gómez-Hernández, J. Jaime|||0000-0002-0720-2196
The ensemble Kalman filter (EnKF) is now widely used in diverse disciplines to estimate model parameters and update model states by integrating observed data. The EnKF is known to perform optimally only for multi-Gaussian distributed states and parameters. A new approach, the normal-score EnKF (NS-EnKF), has been recently proposed to handle complex aquifers with non-Gaussian distributed parameters. In this work, we aim at investigating the capacity of the NS-EnKF to identify patterns in the spatial distribution of the model parameters (hydraulic conductivities) by assimilating dynamic observations in the absence of direct measurements of the parameters themselves. In some situations, hydraulic conductivity measurements (hard data) may not be available, which requires the estimation of conductivities from indirect observations, such as piezometric heads. We show how the NS-EnKF is capable of retrieving the bimodal nature of a synthetic aquifer solely from piezometric head data. By comparison with a more standard implementation of the EnKF, the NS-EnKF gives better results with regard to histogram preservation, uncertainty assessment, and transport predictions. © 2011 International Association for Mathematical Geosciences., The authors gratefully acknowledge the financial support by the Spanish Ministry of Science and Innovation through project CGL2011-23295. The first author appreciates the financial aid from China Scholarship Council (CSC No. [2007]3020).