Pasar al contenido principal

ANALISIS INTEGRAL DE SISTEMAS DEPOSICIONALES CLASTICOS Y MIXTOS DEL CRETACICO DE LA CUENCA IBERICA: APLICABILIDAD A LA CARACTERIZACION DE ALMACENES SEDIMENTARIOS.

CGL2011-23717

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD COMPLUTENSE DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Complex sedimentology and palaeohabitats of Holocene coastal deserts, their topographic controls, and analogues for the mid-Cretaceous of northern Iberia

  • Rodríguez López, Juan Pedro
  • Peyrot, Daniel
  • Barrón López, Eduardo
18 p., [EN] Desert coasts in plate margins contain one of the most variable sedimentary records in terms of facies and stacking patterns. Reliefs in these basins together with massif palaeogeography and palaeotopography strongly control the spatial distribution of facies belts and complex lateral facies changes between very different coeval sub-environments, leading to mixtures of sedimentary particles with variable composition. Palaeotopography and palaeogeography also control the distribution of flora palaeohabitats in the desert basins depending on the spatial distribution of fresh water, the basin geometry, the topographic variability and associated phreatic level, as well as the effective distance from highlands to the coast. The Albian desert basin that developed in northern Iberia presents similarities with the geomorphology of modern Oman, UAE and Eritrea desert coasts. In both systems (Cretaceous and Holocene) the distance between highlands and arid coastline determines the occurrence of extensive aeolian sand seas (e.g. wide desert basin where distance between the highlands and the coastline increases) or the development of wadi-fed alluvial fans that reach directly the desert coast (e.g. narrow desert basin) leading to a variety of clastic and mixed carbonate facies. Due to prevailing arid conditions, vegetation is mainly restricted to highlands and water-conditioned lowland environments such as wadis, (tidal) coastal marshes and lagoons. Depending on sea influence and water availability, Cretaceous vegetation in Iberia were characterized by montane communities including arboreal/shrubby gymnosperms (mainly conifers) and lowland communities composed by a patchy mixture of ferns, Cupressaceae (cypress family), Cheirolepidiaceae and early angiosperms and/or costal woodlands incorporating Araucariaceae (monkey puzzle tree family). This distribution presents similarities with the ecosystems observed today in Eritrea mountains and other Holocene desert coasts., This work is a contribution from the Centre for Energy Geoscience (UWA) and has been possible thanks to the support of the Spanish research projects AMBERIA (CGL2014-52163) and CRE (CGL2017-84419), CGL2005-07445-C03-03 and CGL2011-23717 of the Ministry of Science, Innovation and Universities of the Government of Spain., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sedimentology and sedimentary evolution of the Artoles Fm in Miravete de la Sierra (Teruel, Iberian Chain)

  • Ibáñez, A.
  • Soria, A.R.
  • Liesa C.L.
The sedimentology and sedimentary evolution of the Barremian Artoles Fm in the Camino de Miravete section (Galve sub-basin, Spain) is presented. The detailed log of the stratigraphic succession together with facies analysis and fossil content have allowed the distinction of four main facies associations: mixed terrigenous-carbonate lagoon, flood-tidal delta, proximal middle ramp and distal middle ramp. The sedimentary evolution of facies associations characterizes three successive stages: I- restricted carbonate lagoon system, II- middle ramp system and III- turning back to another carbonate lagoon with more open facies. Eustasy and tectonics may be responsible of the abrupt deepening that took place between stages I and II.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Stratigraphic architecture of alluvial-aeolian systems developed on active karst terrains: An Early Pleistocene example from the Ebro Basin (NE Spain)

  • Gil, H.
  • Luzón, A.
  • Soriano, M.A.
  • Casado, I.
  • Pérez, A.
  • Yuste, A.
  • Pueyo, E.
  • Pocoví, A.
During the Early Pleistocene, fluvial, alluvial and aeolian depositional systems interacted in the central Ebro Basin, Spain, constructing wide alluvial plains over a Neogene evaporite substratum. Fluvial sediments, mainly longitudinal gravel bars and channels, are interdigitated with gravel mass flow and distal mudflat deposits. Aeolian sedimentation is registered as aeolian dunes and sand sheets. Episodes of fluvial deposition alternated with periods of alluvial fan progradation and aeolian deposition. These changes are related to climate-driven water availability. Stratigraphic units and deformation structures show synsedimentary karstification of the evaporite substratum that, although karst was not restricted to any particular climate scenario, was probably favoured during periods of high water availability. Karstification conditioned the development of local sedimentary depocentres which, in turn, influenced the distribution of sedimentary subenvironments as well as the accumulation and preservation of aeolian dunes and lacustrine–palustrine deposits. Stratigraphic architecture shows that thickening of the series due to karst subsidence did not occur homogeneously, but was controlled by diachronous subsidence resulting in numerous angular unconformities. In subsiding karst areas transport capacity was reduced and sediment preservation increased.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Facies and petrophysical modelling of a thick lower cretaceous tsunami deposit in E Spain: Up-scaling from sample to outcrop scales

  • Veloso, Fernanda M.L.
  • Liesa, Carlos L.
  • Soria de Miguel, Ana Rosa
  • Meléndez, N
  • Frykman, P.
The tsunami deposit (up to 3 m thick) of the Cretaceous Camarillas Formation in the Galve sub-basin (eastern Spain) is characterized by a large lateral extent (35 km2) and facies uniformity, consisting in fine to coarse subarkosic–arkosic sandstones. At the scale of outcrop observation, different lithofacies were distinguished and related to sedimentation processes. Sand facies distribution conditioned the facies heterogeneity at both mesoscopic or outcrop scales (10-1–101 m scale) and sample scale (10-3–10-2 m). The sample features were up-scaled to that of a facies model using probability functions and variograms as well as to outcrop-scale data (geometry and size) of facies distribution, and it showed a good correlation with the facies distribution at the outcrop. Porosity is strongly correlated to permeability and the pairs of porosity and permeability values fall into the global hydraulic element (GHEs) 5, so that they can be up-scaled into reservoir models in terms of hy- draulic properties. From data analysis, no apparent link between sand sorting and porosity and permeability values was observed. The petrophysical models, which were independent of facies models, were up-scaled taking into account the porosity and permeability values from sample data and the statistical analysis of their distribu- tion along the outcrop. The permeability model was carried out as a function of porosity by applying a linear relation, which simplified the modelling process and discarded permeability uncertainties linked to facies distri- bution in the deposit. In spite of different source data, the petrophysical models show a distribution of lower and higher values that resembles the facies model. Consequently, our modelling results clearly suggest the link of facies type and their grain size distributions with the petrophysical properties into the deposit. Consistency between facies and petrophysical models and outcrop-scale observations make it possible to extrapolate to other deposits related to similar sedimentary processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Three dimensional characterization of complex mantled karst structures. Decision making and engineering solutions applied to a road overlying evaporite rocks in the Ebro Basin (Spain)

  • Pueyo Anchuela, Óscar
  • López Julián, Pedro Luis
  • Casas Sainz, Antonio María
  • Liesa, Carlos Luis
  • Pocoví Juan, Andrés
  • Ramajo Cordero, Javier
  • Pérez Benedicto, José Ángel
At mantle/cover evaporite karst settings, evidences of surficial subsidence are usually strongly dependent on geomechanical properties and spatial inhomogeneities within the cover series. In infrastructure assets, affected by karst processes, the evaluation of mitigation or engineering solutions requires a 3D reconstruction of the underground, karst-affected materials. Analysis and surveillance are also required to avoid deterioration of natural conditions and the migration or the increase in rate of karst features. In the central Ebro Basin, fluvial deposits cover soluble salts (mainly gypsum) located below the regional water table. Variations of geomechanical parameters of the cover, mainly related to carbonate crusts, and the contemporaneous sedimentation of fluvial deposits during karst activity can complicate the characterization of affected volumes. In this work, an integrated analysis including the available information, 3D characterization by means of GPR and three boreholes in a peri-urban road was carried out to finally define the geometry and evolution of karst phenomena. An evaluation of metastable situations is also considered in order to define the zoning for hazard mitigation. This evaluation shows that the volumetric affection to the cover series is in the range of tens of thousands of cubic meters. A proposed list of factors related to social aspects, infrastructure relevance and budget is analyzed.