Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Geometría y cinemática de la zona de falla de Río Grío: evidencias de transpresión alpina en la Cadena Ibérica

  • Marcén Albero, Marcos
  • Román Berdiel, María Teresa
La falla de Río Grío constituye uno de los principales accidentes que segmentan la Cordillera Ibérica.Mantiene dirección NNW-SSE, y está caracterizada por la presencia de una zona de falla con rocas asociadas (harinas y brechas de falla), con un espesor de decenas de metros. En este trabajo se presenta el análisis a escala mesoestructural de la zona de falla. Esta falla discurre próxima al cabalgamiento de Datos, la principal estructural Varisca de este sector de la Cordillera Ibérica. La cartografía detallada realizada revela que la zona de falla de Río Grío está compuesta por lentículas hectométricas, que muestran una geometría anastomosada y fuerte buzamiento hacia el sur. La estructura interna de las lentículas presenta elementos triásicos y ordovícicos, con pliegues apretados, zonas brechificadas y foliación. Los sentidos de movimiento deducidos a escala meso- (ejes de pliegues, estrías...) y microestructural (foliación, estructuras S/C) tienen fuerte componente inversa y direccional dextra, indicando una partición de la deformación entre las diferentes lentículas. El conjunto de la estructura se interpreta como el resultado de la reactivación durante la compresión cenozoica NNE-SSW a NE-SW de zonas de debilidad probablemente formadas durante la época tardihercínica.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tethyan versus Iberian extension during the Cretaceous period in the Eastern Iberian Peninsula: insights from magnetic fabrics

  • García-Lasanta, C.
  • Román-Berdiel, T.
  • Oliva-Urcia, B.
  • Casas, A. M.
  • Gil-Peña, I.
  • Speranza, F.
  • Mochales, T.
This work investigates how anisotropy of magnetic susceptibility (AMS) recorded the strain related to the Early Cretaceous extensional processes in synrift sediments of the Maestrat basin (eastern Spain). Forty-two sites, distributed throughout the Lower Cretaceous sequence with dominant gentle dips, were sampled. Minerals contributing to the AMS are mainly phyllosilicates. The parallelism between magnetic and sedimentary foliation seems to indicate that a primary (synsedimentary and early diagenetic) magnetic fabric was preserved at 84% of sites. Consequently, preferred orientations of magnetic lineations are interpreted to record the effect of extensional processes coeval with sedimentation and diagenesis during this period. At these 35 sites, two main magnetic lineation orientations are found, delimiting two large domains: a NE–SW orientation prevailing in the NW sector of the basin (parallel to the extension direction of the Iberian basin), and NW–SE to NNW–SSE orientations to the SE (parallel to the extension direction controlling the western Tethys margin). Directional variability demonstrates that the Maestrat basin is located at the boundary between two domains (Iberian and Tethyan) undergoing different plate-scale extensional processes. The subsequent Cenozoic tectonic inversion affected the synsedimentary magnetic fabrics at only a few sites at the borders of the basin, where compressive features are more developed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Registro de la deformación a escala microestructural en el cabalgamiento de Gavarnie (Zona Axial Pirenaica)

  • Marcén, M.
  • Román-Berdiel, T.
  • Mariani, E.
El cabalgamiento de Gavarnie presenta una zona de falla de unos 30m de espesor desarrollada en ampelitas y carbonatos silúricos, con registro de deformación dúctil (milonitas) en zonas próximas al plano de cabalgamiento principal y un aumento progresivo de la deformación frágil hacia zonas externas en la zona de falla. El análisis de láminas delgadas, bajo microscopio de luz reflejada y transmitida, revela el control y distribución de la deformación por la calcita y los filosilicatos s.l., desarrollando respectivamente foliaciones miloníticas y estructuras semi-dúctiles S-C-C’. Procesos de recristalización dinámica, disolución-precipitación y deformación intracristalina conllevan la generación de orientaciones preferentes de forma en los granos minerales de calcita. Los principales indicadores cinemáticos (S-CC’, fracturas frágiles de Riedel, foliaciones oblícuas, sombras de presión en piritas...) son compatibles con la vergencia Sur del Cabalgamiento de Gavarnie, sin observarse componentes oblicuas relevantes en el desplazamiento. The Gavarnie Thrust shows a 30m thick fault zone developed in the ampelitic and calcareous Silurian rocks, with a record of ductile deformation (mylonites) close to the main thrust plane and a progressive increase of the brittle deformation towards the marginal areas of the fault zone. The analysis of thin-sections under reflected and transmitted light with optical microscope reveals that calcite and phyllosilicates control the strain distribution in the fault rocks, leading to generation of mylonitic foliations and ductile-brittle S-C-C’ structures, respectively. Dinamic recrystallization, solution-precipitation and intracrystalline deformation generate shape preferred orientation in calcite grains. The main shear indicators (S-C-C’, brittle Riedel fractures, oblique foliations, pressure-shadows on pyrites…) are compatible with the South vergence of the Gavarnie Thrust, and no relevant oblique component of displacement has been observed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Análisis de la fábrica magnética en modelos analógicos de arcillas

  • García Lasanta, Cristina
  • Izquierdo Llavall, Esther
  • Román Berdiel, Teresa
Este estudio presenta el análisis de la fábrica magnética en una serie de modelos analógicos realizados con arcillas rojas comerciales. A partir de la disgregación de la arcilla en agua y su posterior decantación conseguimos reproducir la adquisición de una fábrica magnética deposicional (geometría oblata del elipsoide magnético con el eje mínimo de susceptibilidad perpendicular al plano de depósito). En un modelo de deformación de desgarre (experimento de Riedel), la lineación magnética se dispone paralela a la dirección de estiramiento. En el modelo de acortamiento, la lineación magnética se orienta perpendicular a la dirección de acortamiento. Los resultados obtenidos ponen de manifiesto el gran potencial de la arcilla roja comercial para ser utilizada en este tipo de modelos analógicos, así como su capacidad de registrar una fábrica magnética coherente en cada caso. This study shows the magnetic fabric analysis applied to several analogue models developed with common commercial red clays. By dispersing the clays in water and after allowing their subsequent decantation, we were able to reproduce the acquisition of a depositional magnetic fabric (oblate geometry of the magnetic ellipsoid with the minimum susceptibility axis perpendicular to the deposit plane). In a strike-slip deformation model (Riedel experiment), magnetic lineation is parallel to the stretching direction. In the shortening model, magnetic lineation orients perpendicular to the shortening direction. The obtained results illustrate the great potential of these commercial red clays to be used in this type of analogue models, as well as their capacity to register a coherent magnetic fabric in each case.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Análisis de estrías en pliegues N-S del Pirineo central meridional

  • Soto, R.
  • Casas-Sainz, A.M.
Este trabajo muestra el análisis de indicadores cinemáticos (estrías) tomados sobre planos de estratificación de varios pliegues N-S con inmersión N de la vertiente meridional del Pirineo Central. Para explicar la orientación no perpendicular al eje del pliegue de varias estrías encontradas se han propuesto dos modelos geométricos relacionados con pliegues cilíndricos formados por mecanismo de flexural-slip: (1) dos etapas de plegamiento e inmersión sucesivas, y (2) plegamiento e inmersión simultáneos. This work studies the use of slickenfibres measured on bedding surfaces as kinematic indicators in N-S trending, N-plunging folds located in the Southern Pyrenees. To explain oblique to fold axis slickenfibres, two geometrical models are derived from flexural-slip mechanism of cylindrical folding: (1) two sequential stages of folding and plunging, and (2) simultaneous folding and plunging.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Análisis de la fábrica magnética en modelos analógicos de arcillas

  • García-Lasanta, C.
  • Izquierdo-Llavall, E.
  • Román-Berdiel, T.
Este estudio presenta el análisis de la fábrica magnética en una serie de modelos analógicos realizados con arcillas rojas comerciales. A partir de la disgregación de la arcilla en agua y su posterior decantación conseguimos reproducir la adquisición de una fábrica magnética deposicional (geometría oblata del elipsoide magnético con el eje mínimo de susceptibilidad perpendicular al plano de depósito). En un modelo de deformación de desgarre (experimento de Riedel), la lineación magnética se dispone paralela a la dirección de estiramiento. En el modelo de acortamiento, la lineación magnética se orienta perpendicular a la dirección de acortamiento. Los resultados obtenidos ponen de manifiesto el gran potencial de la arcilla roja comercial para ser utilizada en este tipo de modelos analógicos, así como su capacidad de registrar una fábrica magnética coherente en cada caso. This study shows the magnetic fabric analysis applied to several analogue models developed with common commercial red clays. By dispersing the clays in water and after allowing their subsequent decan-tation, we were able to reproduce the acquisition of a depositional magnetic fabric (oblate geometry of the magnetic ellipsoid with the minimum susceptibility axis perpendicular to the deposit plane). In a strike-slip deformation model (Riedel experiment), magnetic lineation is parallel to the stretching direction. In the shortening model, magnetic lineation orients perpendicular to the shortening direction. The obtained results illustrate the great potential of these commercial red clays to be used in this type of analogue models, as well as their capacity to register a coherent magnetic fabric in each case.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strain indicators and magnetic fabric in intraplate fault zones: Case study of Daroca thrust, Iberian Chain, Spain

  • Casas-Sainz, A.M.
  • Gil-Imaz, A.
  • Simón, J.L.
  • Izquierdo-Llavall, E.
  • Aldega, L.
  • Román-Berdiel, T.
  • Osácar, M.C.
  • Pueyo-Anchuela, Ó.
  • Ansón, M.
  • García-Lasanta, C.
  • Corrado, S.
  • Invernizzi, C.
  • Caricchi, C.
Anisotropy of magnetic susceptibility (AMS) has been applied to the study of shallow fault zones, although interpretation of the results requires establishing clear relationships between petrofabric and magnetic features, magnetic behaviour of fault rocks, and an extensive knowledge of P-T conditions. In this work, we demonstrate that magnetic methods can be applied to the study of heterogeneous fault zones, provided that a series of requisites are met. A major fault zone within the Iberian plate (Daroca thrust), showing transpressional movements during Cenozoic time was chosen for this purpose, because of the exceptional outcrops of fault gouge and microbreccia and its relevance within the context of the northeastern Iberian Plate. Magnetic fabrics were analysed and the results were compared with foliation and S-C structures measured within the fault zone. Clay mineral assemblages suggest maximum burial depths shallower than 2 km (<60–70 °C) for fault rocks in the footwall of the Daroca thrust. The orientation of the AMS axes is consistent with mesostructural strain indicators: kmin parallels the mean pole to S, or it is intermediate between S and C poles; kmax is oriented at a high angle (nearly orthogonal in overall) to the transport direction, which can be explained from both deformational and mineralogical controls. Both magnetic fabrics and kinematic indicators are consistent with a reverse movement for most of the fault zone.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aportación de la fábrica magnética a la caracterización cinemática de la Falla de Jarque (Cordillera Ibérica)

  • Sierra Campos, Pablo
  • Román Berdiel, Teresa
  • Casas Sainz, Antonio M.
  • Marcén, Marcos
En este trabajo se aplica la anisotropía de la susceptibilidad magnética (ASM) junto con el análisis estructural a la Falla de Jarque (Cordillera Ibérica) en su tramo noroccidental. La Falla de Jarque, de dirección NW-SE, se extiende longitudinalmente a lo largo de al menos 50 km, siendo una de las principales estructuras que compartimentan la Rama Aragonesa de la Cordillera Ibérica. Las estructuras S-C observadas en el afloramiento de Jarque muestran una componente dextral-inversa sobre planos de orientación NW-SE y fuerte buzamiento al W, consistente con las estrías subhorizontales medidas en planos de falla del afloramiento de Oseja. La foliación magnética dominante coincide con la orientación intermedia entre los planos S y C, y la lineación magnética muestra dos máximos. El máximo principal es subvertical, paralelo a la dirección de máxima pendiente de los planos de foliación y fallas y próximo a la lineación de intersección entre planos S y C. El segundo máximo es subhorizontal y próximo a la dirección de transporte deducida a partir de las estrías y las estructuras S-C. Los resultados obtenidos indican una estructura resultante de la reactivación de una antigua falla (tardivarisca a triásica) durante la Orogenia Alpina asociada a la compresión NNE-SSW. In this paper the Anisotropy of the Magnetic Susceptibility (AMS) is applied together with the structural analysis along the Jarque Fault (Iberian Range) in its north-western sector. The Jarque Fault has a NW-SE direction, and extends longitudinally along at least 50 km, being one of the main structures that compartmentalize the Aragonese Branch of the Iberian Range. The S-C structures observed in the Jarque outcrop show a dextral-reverse component on planes with NW-SE trend and strong dip to W, consistent with the subhorizontal striae measured in fault planes of the Oseja outcrop. The dominant magnetic foliation coincides with the intermediate orientation between the S and C planes, and the magnetic lineation shows two maxima. The main maximum has a subvertical plunge being parallel to the direction of maximum slope of the planes of foliation and faults and also approximates the intersection lineation between S and C planes. The second maximum has a subhorizontal plunge that approximates the transport direction inferred from striae and S-C structures. The geological map shows structures oblique to the trace of the main fault, such as minor faults with WNW-SES trend and folds with E-W direction compatible with the dextral movement of the Jarque Fault. The results obtained indicate a structure resulting from the reactivation of an ancient (late-Variscan to Triassic) fault during the Alpine Orogeny associated with the NNE-SSW compression.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Kinematics and strain distribution in an orogen-scale shear zone: Insights from structural analyses and magnetic fabrics in the Gavarnie thrust, Pyrenees

  • Marcén, M.
  • Casas-Sainz, A.M.
  • Román-Berdiel, T.
  • Oliva-Urcia, B.
  • Soto, R.
  • Aldega, L.
This work aims to characterize the Gavarnie thrust, one of the large-scale thrusts that define the Alpine structure of the west-central sector of the Pyrenees. A detailed comparison of structural analysis and magnetic fabrics is carried out for the Paleozoic phyllonites of the Gavarnie thrust, in order to decipher strain distribution and transport direction. The AMS at room (RT-AMS) and low (LT-AMS) temperature and the AIRM can be correlated with the structural patterns: kmin axes are mainly parallel to the pole of the S, C or C' planes and kmax axes are parallel to the transport direction and related to ductile S-C structures. Furthermore, the Pj-T changes across the shear zone characterize strain variations: larger Pj and T are found in the basal, most deformed part of the shear zone, and lower values are found where the interaction between Alpine and Variscan-related petrofabrics is stronger. We also interpret the reactivation of Variscan inherited fabrics within the Alpine shear zone. In spite of the heterogeneous strain, markers indicate a common, top-to-the-South (N190E) Alpine transport direction, which contrasts with the strong obliquity of the genetically-related structures developed in the Southern Mesozoic sedimentary cover. In this sense, our data suggest a complete decoupling between basement and cover units during the Alpine compression.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unraveling Multiple Thermotectonic Events Accommodated by Crustal\u2010Scale Faults in Northern Iberia, Spain: Insights From K-Ar Dating of Clay Gouges

  • Aldega, L.
  • Viola, G.
  • Casas-Sainz, A.
  • Marcén, M.
  • Román-Berdiel, T.
  • Lelij, R.
Large-scale faults in the continental crust are significant features that control the evolution of sedimentary basins and intraplate mountain chains. Deciphering their evolution is a significant task because faults slip and reactivate in a variety of geological settings. In this work, clay gouges of two major orogen-scale, long-lived faults in northern Iberia, the Río Grío and Vallès-Penedès Faults, were investigated by X-ray diffraction and K-Ar isotopic analysis. Illite polytype determinations of 44 subfractions (from <0.1 to 10 Œºm) allowed us to discriminate between authigenic/synkinematic illite crystals formed during faulting and detrital illite crystals inherited from the host rock. K-Ar dating provided a detailed set of ages corresponding to key stages of the thermotectonic evolution of the Iberian Plate: (a) the Permian to Late Triassic extensional/transtensional activity associated to the emplacement of Late Variscan magmatic bodies and hydrothermal mineralizations, (b) the opening of the Central Atlantic Rift during Late Triassic-Early Jurassic times, (c) the Late Jurassic-Early Cretaceous rifting that led to the development of Mesozoic extensional/transtensional basins in northern Iberia, (d) the final stage of the anticlockwise rotation of the Iberian Plate with respect to Eurasia and the accommodation of the first Pyrenean compressional pulses in Campanian time, and (e) the positive inversion of Mesozoic extensional basins due to far-field stresses associated with the Alpine orogeny during the Paleogene. The results highlight that thermotectonic conditions characterized by high-geothermal gradients strongly favor fault movement and neoformation of clay minerals in fault gouges, regardless of the prevailing tectonic regime.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

On the influence of magnetic mineralogy in the tectonic interpretation of anisotropy of magnetic susceptibility in cataclastic fault zones

  • Roman-Berdiel, T.
  • Casas-Sainz, A.M.
  • Oliva-Urcia, B.
  • Calvin, P.
  • Villalain, J.J.
Of the several factors involved in the development of magnetic fabrics in fault zones at shallow crustal levels, lithology and deformation intensity have probably the most important consequences for the reconstruction of their kinematic history. The basement-involved Cenozoic thrusts in the Demanda Massif (N Spain) provide the opportunity for testing the applicability of anisotropy of magnetic susceptibility (AMS) to the study of deformation in cataclastic fault rocks belonging to shallow fault zones. The Rastraculos thrust is a relatively minor basement thrust (dip-slip movement of 2km defined from cross-sections and geological maps) of Cenozoic age. This thrust contains a re-activated fault zone involving different rock types both belonging to its hangingwall (Palaeozoic) and its footwall (Triassic sandstones and dolostones and Jurassic limestones). AMS results show magnetic foliations parallel or slightly oblique to the fault zone, and both transport-parallel (projected onto the foliation plane) and transport-perpendicular (parallel to the observed intersection lineation) magnetic lineations. The two types of strain/magnetic fabric relationships can be related to deformational and mineralogical features inferred from the direct analysis of thin and polished sections under the microscope and the naked eye, respectively. Analysis of fault rocks in the Rastraculos fault zone indicates that in cataclasites, magnetic fabrics are particularly dependent on lithology and hence magnetic mineralogy. The results obtained prove the usefulness of AMS in fault zones where kinematic indicators are scarce and also give clues on the number of samples necessary to define magnetic susceptibility axes, depending on grain size, ellipsoid shapes and magnetic mineralogy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Remagnetizations used to unravel large-scale fold kinematics: A case study in the Cameros Basin (Northern Spain)

  • García-Lasanta, C.
  • Casas-Sainz, A.
  • Villalaín, J.J.
  • Oliva-Urcia, B.
  • Mochales, T.
  • Speranza, F.
The occurrence of a generalized remagnetization at 100 Ma makes the Cameros Basin, an 8 km thick Cretaceous extensional trough inverted during the Cenozoic, a perfect natural frame to apply paleomagnetic vectors to geometrical reconstructions. The widespread remagnetization that occurred between the extensional and compressional episodes, linked to low-grade metamorphism, provides a tool to reconstruct the attitude of beds at the remagnetization time, thus giving a picture of basin geometry during the Cretaceous. This snapshot is compared with the present-day geometry to constrain the large-scale kinematic evolution of folds between these two stages. According to this methodology, a syncline, preinversion geometry of the sedimentary basin was determined and the position of its main axial surface was accurately located. Comparing with the present-day, postinversion geometry, a northward hinge migration of around 5 km is inferred. This migration is the result of the southward back thrusting in the southern basin border, favored by the detachment level at the base of the Mesozoic cover. Conversely, the main northward directed thrust, which involved both the Paleozoic basement and the Mesozoic cover, did not significantly affect the internal structure of the basin in spite of its overall displacement of more than 20 km.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Strain variations in a seismogenic normal fault (Baza Sub-basin, Betic Chain): Insights from magnetic fabrics (AMS)

  • Marcén, Marcos
  • Román-Berdiel, Teresa
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Oliva-Urcia, Belén
  • Castro, Julia
AMS and structural analysis are here applied to study the deformed zone associated with a large-scale, active normal fault in the central Betic Cordillera (Spain), namely the Baza fault system, to determine: i) the kinematics of structures and their relation with fault zone architecture and segmentation degree, ii) the correlation between deformational structures and the different types of magnetic fabrics and iii) the evolution of magnetic fabrics patterns, from sedimentary to shear-related, associated with normal faults. Five outcrops (969 samples) were analysed along the fault trace, which shows different degrees of segmentation along strike and strong localization of deformation along narrow fault zones. A first, main set of magnetic fabric data corroborates the normal kinematics of the Baza fault, showing magnetic lineations parallel to the dip-slip, transport direction. A second, secondary set of magnetic lineations, is parallel to the intersection lineation, and can be related to less intense deformation in the fault rocks. Furthermore, a detailed study (523 samples) of a trench excavated across the fault zone, where two fault splays tend to coalesce in a linkage relay zone indicates that i) lithology and distance to fault planes are two factors that control the development of extension-related magnetic fabrics in weakly deformed sediments, ii) the development of shear-related fabrics in fault zones entails the mechanical rotation of minerals, iii) different orientation of magnetic lineations are related to different intensity of bulk deformation and iv) magnetic lineation is useful to define local deviations of deformation axes produced by changes in the local extension direction (from fault-perpendicular to fault-parallel extension) in the linkage zone between adjacent fault splays.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tectonic fabrics vs. mineralogical artifacts in AMS analysis: A case study of the Western Morocco extensional Triassic basins

  • Oliva-Urcia, B.
  • Casas, A. M.
  • Moussaid, B.
  • Villalaín, J. J.
  • El Ouardi, H.
  • Soto, R.
  • Torres-López, S.
  • Román-Berdiel, T.
New magnetic fabric data from 48 sites in Upper Triassic red beds from the Argana, Asni and Tizi n''Tichka areas in the western High Atlas, in combination with rock magnetic analyses, SEM observations and qualitative chemical analyses, reveal that mineralization processes can affect the primary (extensional) or secondary (post-depositional) magnetic fabrics. Twenty out of the 48 analyzed sites show tectonic-related fabrics consistent with the rifting stage (primary). Their orientation suggests that the extensional Atlasic (for the Asni area) and Atlantic (for Argana area) distinct directions prevailing during Liassic times are already present in the Upper Triassic sediments. The other 28 sites show axes switching (including different possibilities, kmax-kmin or kint-kmin), indicating their secondary development related to mineralogical changes after deposition. However, orientation of magnetic susceptibility axes (without considering their relative value) is consistent with the main directions obtained for the rifting stage. This magnetic fabric study also suggests that (i) extension had a small transtensional component and (ii) there is a limited influence of compressional inversion tectonics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multidisciplinary approach to constrain kinematics of fault zones at shallow depths: a case study from the Cameros–Demanda thrust (North Spain)

  • Casas-Sainz, A.
  • Román-Berdiel, T.
  • Oliva-Urcia, B.
  • García-Lasanta, C.
  • Villalaín, J. J.
  • Aldega, L.
  • Corrado, S.
  • Caricchi, C.
  • Invernizzi, C.
  • Osácar, M. C.
Thrusting at shallow depths often precludes analysis by means of structural indicators effective in other geological contexts (e.g., mylonites, sheath folds, shear bands). In this paper, a combination of techniques (including structural analysis, magnetic methods, as anisotropy of magnetic susceptibility and paleomagnetism, and paleothermometry) is used to define thrusting conditions, deformation, and transport directions in the Cameros–Demanda thrust (North Spain). Three outcrops were analyzed along this intraplate, large-scale major structure having 150 km of outcropping length, 30 km of maximum horizontal displacement, and 5 km of vertical throw. Results obtained by means of the different techniques are compared with data derived from cross sections and stratigraphic analysis. Mixed-layer illite–smectite and vitrinite reflectance indicating deep diagenetic conditions and mature stage of hydrocarbon generation suggests shallow depths during deformation, thus confirming that the protolith for most of the fault rocks is the footwall of the main thrust. Kinematic indicators (foliation, S/C structures, and slickenside striations) indicate altogether a dominant NNW movement of the hanging wall in the western zone and NE in the eastern zone of the thrust, thus implying strain partitioning between different branches of the main thrust. The study of AMS in fault rocks (nearly 400 samples of fault gouge, breccia, and microbreccia) indicates that the strike of magnetic foliation is oblique to the transport direction and that the magnetic lineation parallelizes the projection of the transport direction onto the kmax/kint plane in sites with strong shear deformation. Paleomagnetism applied to fault rocks indicates the existence of remagnetizations linked to thrusting, in spite of the shallow depth for deformation, and a strong deformation or scattering of the magnetic remanence vectors in the fault zone. The application of the described techniques and consistency of results indicate that the proposed multidisciplinary approach is useful when dealing with thrusts at shallow crustal levels.