Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Role of pH, Temperature, and NH4 + during Mica Weathering

  • Lamarca Irisarri, Daniel
  • Van Driessche, Alexander E. S.
  • Jordan, G.
  • Cappelli, C.
  • Huertas, F. J.
Phyllosilicates are abundant materials both on Earth and Mars, and the weathering of these minerals is an essential part of a wide variety of geochemical cycles. Alteration mainly takes place at the solution-mineral interface and needs to be fully understood in order to correctly model global water-rock interactions. To directly link the physicochemical solution properties to the dominant surface processes controlling phyllosilicate alteration, we used a custom-built hydrothermal atomic force microscope to study in situ the surface reactivity of biotite, phlogopite, and muscovite in contact with aqueous solutions for a broad range of temperatures and pH values. On the basis of our microscopic observations correlated with previously obtained macroscopic dissolution rates, we have constructed a tentative weathering diagram for mica minerals connecting the dominant surface mechanisms and bulk dissolution behavior to the physicochemical solution properties (pH, T, and speciation). The resulting diagram can be divided into two main areas: low-grade weathering occurring at low temperatures and mildly acidic to neutral pH and high-grade weathering taking place at high temperatures and low pH, separated by a transition zone. Each of these areas is characterized by a series of chemical and physical surface processes, which can be related directly or indirectly to incongruent and congruent bulk dissolution. The transition temperatures and pH values depend on the type of mica, with biotite being the most reactive one and muscovite the least reactive one. It is noteworthy that for close to neutral pH conditions the presence of NH4 + shifts the transitions from low- to high-grade weathering to a significantly lower temperature. © 2019 American Chemical Society., This study was supported by funding from the Spanish Government Contracts (MINECO CGL2011-22567 and CGL2014-55108-P, with contribution of EU-FEDER funds) and the PICS 2017 CNRS program (PICS07954). D.L.-I. was supported by an FPI fellowship (BES-2012-058890) and Grants (EEBB-I-16-11519 and EEBB-I-15-10043
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Arsenic-bearing serpertine-group minerals: mineral synthesis with insights for the arsenic cycle

  • Ryan, Peter C.
  • Huertas, F. J.
  • Pincus, L. N.
  • Painter, W.
When present at elevated levels in drinking water, arsenic is toxic, and magnesian clays are gaining recognition as a source of elevated arsenic in groundwater. In the crust and upper mantle of Earth, arsenic incorporation into clay minerals is influenced by geochemical conditions associated with hydrothermal fluids and metamorphic processes (e.g. serpentinization), meaning that As is a useful tracer of fluid-flow in the deep Earth. To improve understanding of arsenic speciation in groundwater, sediments, soils, and hydrothermal-metamorphic systems, the present study examined arsenic incorporation into magnesian clays by synthesis of serpentine minerals (200C, 10 d) with varied concentrations of Si, Al, As, and As. The synthesis experiments produced two distinct crystal types, tubular and platy serpentines, each with 10–15% randomly interstratified talc layers. X-ray absorption spectroscopy indicated that As and As occurred in the tetrahedral sheet. Single-crystal analysis revealed that tubular crystals contained up to 1 wt.% arsenic [Mg(SiAs)O(OH)] (mean 0.2 wt.% As). The mean composition of platy, high-Al crystals is (MgAl)(Si)O(OH), and that of platy, medium-Al crystals with As is (MgAl) (SiAs )O(OH). Charge, geometry, and radius of tetrahedral AsO oxyanions are similar to tetrahedral SiO , and this facilitates fixation of As into the tetrahedral sheet of clay minerals. The geometry and size of the larger As in tetrahedral sites (as a pyramidal AsO oxyanion) may limit incorporation relative to As. Arsenic-bearing Mg clays crystallize in alkaline environments where AsO or AsO are the dominant As species and where high pH accompanies crystallization of serpentine, talc, chlorite, or Mg-smectite. The presence of tetrahedral As in these clays raises the possibility of tetrahedral As in other Mg clays (e.g. sepiolite or kerolite) as well., Funding was provided by NSF-EAR-0959306, the Middlebury College Undergraduate Research Office, and MINECO (CGL2014-55108-P and CGL2017-92600-EXP) with a contribution of FEDER funds. The authors thank Dr. Eli Stavitski for use of the Inner Shell Spectroscopy beamline (8-ID) of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-SC0012704. The authors thank the following for technical expertise and assistance: María del Mar Abad for TEM, Jody Smith for ICPMS, and Eduardo Flores for FTIR.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Illitization of montmorillonite in ammonium solutions under hydrothermal conditions

  • Bentabol, María
  • Lamarca-Irisarri, Daniel
  • Van Driessche, Alexander E. S.
  • Ryan, Peter C.
  • Huertas, F. J.
In diagenetic solutions, ammonium may be incorporated into smectites as an exchangeable cation and become fixed within the interlayer space of illites and other white micas. To study the potential impact of NH4+ on the smectite-to-illite transformation reaction, a series of hydrothermal experiments were carried out at 100, 150 and 200 °C, spanning reaction duration from 15 to 90 days, and two NH4+ concentrations (0.1 and 0.2 M). The solids resulting from these alteration experiments were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), and transmission and analytical electron microscopy (TEM and AEM). The XRD analysis revealed that, under the specified experimental conditions, smectite incorporates NH4+ in the structure, leading to the formation of non-swelling layers, resulting in partial transformation to illite layers and producing packets of disordered illite/smectite (I/S). In addition, a minor XRD peak at ∼10 Å suggests the formation of discrete illite crystals. The FTIR spectra demonstrated the uptake of NH4+, with deformation bands observed at 1400 and 1430 cm−1, corresponding to exchangeable NH4+ in smectite and fixed NH4+ in high-charge layers, respectively. TEM analysis revealed that smectite particles exhibited wavy stacks comprising a few layers with abundant defects and lateral discontinuities. The interlayer spacing in these particles ranged from 12 to 15 Å and became thinner and more plate-like with increasing temperature and time. Moreover, they contained inclusions of 10–10.3 Å layers, either as discrete layers or in packets of several layers, indicating the formation of disordered mixed-layer illite-smectite. Lateral transitions from 12 to 15 Å to 10 Å layers were frequently observed and interpreted as reaction fronts due to local rearrangement. At 150 and 200 °C, isolated packets of 10 Å layers were identified as discrete illite crystals that precipitated directly from solution. Analysis of the chemical composition of individual particles revealed an increase in octahedral charge (MgVI for AlVI substitution) in smectite particles, followed by increase in tetrahedral charge in I/S particles. Interlayer NH4+ played a stabilizing role in the high-charge layers and favored the smectite-to-illite conversion process., Financial support was obtained from MINECO (CGL2011-22567, CGL2014-55108P), with contribution of FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrothermal synthesis of zeolites using sanitary ware waste as a raw material

  • García-Villén, Fátima
  • Flores-Ruíz, Eduardo
  • Verdugo-Escamilla, Cristóbal
  • Huertas, F. J.
Zeolites are extensively produced by hydrothermal treatment of different raw materials, such as kaolin. Sanitary ware (SW) is a kaolin-based ceramic ware usually found in sinks, urinals and bathtubs whose production is led by Spanish domestic clay product industry. SW production generates approximately 8% of solid waste in Spain, which increases landfills sizes and pose economic, social and technical problems. This study aims to evaluate the feasibility of solid waste of SW industry to produce zeolites once subjected to a conventional hydrothermal treatment during different times and temperatures. Ground SW was subjected to dissolution in a highly basic medium (NaOH 5 M) inside a Teflon-lined stainless steel reactors, at temperatures of 100, 150 and 200 °C for 1 to 30 days. X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were used to characterize both the raw material and resultant mineral phases. Quartz and mullite present in SW transform into zeolites, as temperature and time increase. Mineral assemblage at 100 °C includes zeolite P, Na-faujasite and sodalite as major component and analcime, natrolite, and zeolite A as minor, which behave as metastable phases and their relative abundance depends on aging time. Analcime and cancrinite crystallization is favored by high temperature (150 °C to 200 °C) and increasing aging time produces analcime disappearance. Cancrinite is the dominant mineral after 30 days. Conventional SW waste is an optimal raw material for zeolites synthesis under high alkaline hydrothermal conditions. Combining time and temperature it is possible to drive crystallization towards a target phase., This research was supported by funding from MINECO ( CGL2014-55108P ). FGV benefit from JAE-intro ( CSIC ) and FPU ( MECD ) grants. We thank I. Guerra (CIC, University of Granada ) and A. Salido ( IACT ) for expertise with SEM and FRX, respectively. CVE acknowledges to Excellence Network of Crystallography and Crystallization “Factoría de Cristalización” FIS2015-71928-REDC supported by Spanish MINECO and RMN143 of Junta de Andalucía . FJH, amdg.