Pasar al contenido principal

GEOMORFOLOGIA TECTONICA, PALEOSISMOLOGIA Y ARQUEOSISMOLOGIA EN LA CORDILLERA BETICA Y ESPAÑA CENTRAL DURANTE EL CUATERNARIO

CGL2015-67169-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE SALAMANCA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Archaeoseismological analysis of the late 4th century CE tsunami event of Baelo Claudia (Gibraltar Arc, South Spain)

  • Silva Barroso, Pablo Gabriel
  • Elez Villar, Javier
  • Pérez Tarruella, Javier
  • Sánchez-Sánchez, Yolanda
  • Santos-Delgado, Gabriel
  • Carrasco-García, Pedro
  • Giner Robles, Jorge Luis
  • Roquero, Elvira
  • Reicherter, Klaus
  • García Jiménez, Iván
  • Prados Martínez, Fernando
  • Pérez López, Raúl
  • Bardají, Teresa
  • Rodríguez Pascua, Miguel Ángel
  • Pérez Tarruella, Javier|||/items/532f688e-48f4-45de-b8dc-d7e428c469cc
  • Prados Martínez, Fernando|||/items/2d11a23c-31d4-4a5f-999e-78896f41bc37
We report on the tsunami deposits burying the coastal Roman remains of the Baelo Claudia archeologic site and its surroundings up to ca. +8 m above the sea-level. We present new data from 2D ERT profiles (Electric Resistivity Tomography) of the lagoonal zone near the eastern necropolis, adjacent to the city walls, as well as new sedimentologic insights on the paleotsunami deposits inside and outside the city. The tsunami layer has been well documented inside the city in previous works, being archaeologically dated in the late 4th century CE. It is interpreted that the tsunami triggered the latter abandonment of the city. The tsunami layer is a dark cohesive sandy deposit (28 to 52 cm thick) containing fragments of pottery, fish and animal bones, glassware, bricks and large boulders of masonry blocks, and column drums. The layer also contains microfaunal assemblages with a mixture of benthic and planktonic foraminifera, as well as lagoonal brackish-water gastropods, numerous shell debris, and broken reworked foraminifera. Data presented in this work indicate that the paleotsunami layer is mainly composed of well-rounded fine-medium sands originated from the reworking of aeolian and littoral beach deposits of the old roman spit-bar enclosing the ancient embayment. We interpret parts of the tsunami layer as backwash deposits trapped within the ruins of the city after the earthquake destruction, as testified by recent excavations in the funerary monuments of the Eastern necropolis.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Los terremotos antiguos del conjunto arqueológico romano de Baelo Claudia (Cádiz, Sur de España): Quince años de investigación arqueosismológica, Ancient earthquakes in the Roman city of Baelo Claudia (Cádiz, South of Spain): Fifteen years of archaeosimology research

  • Silva Barroso, Pablo Gabriel
  • Zazo, Caridad
[ES] El presente trabajo ilustra el estado del conocimiento sobre arqueosismología en la antigua ciudad romana de Baelo Claudia (Tarifa, Cádiz) tras casi quince años de investigaciones. Esta antigua ciudad romana se vio afectada por dos importantes terremotos en los años 40–60 AD y 260–290 AD. El primero de ellos afectó en mayor grado a la parte baja (costera) de la ciudad provocando importantes cambios urbanísticos y arquitectónicos (monumentalización) en respuesta a las labores de reconstrucción. El segundo de ellos provocó una mayor destrucción, cuya ruina progresiva desembocó en el abandono definitivo de la ciudad en el 365–390 AD. Se catalogan, cartografían y describen la mayor parte de los Efectos Arqueológicos de los Terremotos (EAEs) del sector monumental de la ciudad, que testifican los efectos producidos por el terremoto ocurrido en el 260–90 AD. La cartografía de daños (EAEs) muestra la distribución y orientación de los daños en la zona baja de la ciudad, así como la ocurrencia de otros procesos cosísmicos, como deslizamientos y pequeños tsunamis. El análisis estructural del conjunto de daños orientados indica que la dirección de movimiento del terreno se produjo en una dirección dominante del SO al NE. Los análisis geoarqueológicos, así como importantes anomalías constructivas y funerarias, sugieren la intervención de tsunamis de escaso poder de penetración durante los dos terremotos, apuntando a la existencia de una fuente sísmica submarina común al SSO de la ciudad. Se han identificado diferentes fallas normales de dirección N-S en la zona de la Bahía de Bolonia, algunas de las cuales se prolongan hacia el interior del mar en la zona SSO de Baelo Claudia. Estas fallas presentan claras evidencias de actividad Cuaternaria y podrían considerarse como las fuentes sísmicas más probables para los dos antiguos terremotos que afectaron a la ciudad en época romana., [EN] This work illustrates the state of the art on archaeoseismology of the ancient Roman city of Baelo Claudia (Tarifa, Cádiz) after nearly fifteen years of research. This ancient Roman site was affected by two earthquakes in the years AD 40-60 and AD 260-290 which promoted important urban and architectural changes and eventually the destruction and further abandonment of the city in AD 365-390. Earthquake Archaeoseismological Effects (EAEs) are catalogued, described and mapped in the entire monumental sector of the city mainly witnessing the last earthquake which occurred in AD 260-290. Mapping of oriented EAEs illustrate damage distribution all over the lower sector of the city, as well as the occurrence of suspect coseismic landslide and tsunami events. The structural analysis of oriented EAEs throughout the entire mapped sector suggests that the intervening ground motion was preferentially oriented in a SW to NE direction. The geoarchaeological analysis and some relevant archaeological anomalies, strongly suggest the occurrence of coeval tsunami events during both ancient earthquakes, pointing to the occurrence of an offshore seismic source SSW of the city. Several N-S normal faults have been identified around the Bolonia Bay area and some of them continue offshore SSW of Baelo Claudia. These faults with clear Quaternary activity can be considered as the more probable seismic sources for the events affecting the ancient Roman site and they are consistent with the mapped damage orientation displayed by the structural analysis of EAEs within the old Roman city, Este trabajo ha sido financiado por sucesivos proyectos de investigación en la zona desde el año 2001 y en la actualidad por los Proyectos de Investigación CGL2015-67169-P (USAL: QTECTSPAIN), CGL2012-37281-C02.01 (USAL: QTECTBÉTICA) y CGL2012-33430 (MNCN, CSIC)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Incremento de CO2 en cuevas profundas asociado a sismicidad cercana, Atmospheric CO2 increasing in deep caves related to micro seismicity

  • Pérez López, Raúl
  • Patyniak, M.
  • Sánchez-Moral, Sergio
  • Bañón, E.
  • Martínez-Díaz, J. J.
  • Cuezva, Soledad
  • Lario, Javier
  • Martín-Velázquez, S.
  • Silva Barroso, Pablo Gabriel
  • Giner-Robles, Jorge L.
  • Rodríguez-Pascua, M. A.
[ES] Se han registrado variaciones del contenido de CO2 en la Sima de Benis (Cieza, Murcia, SE de España), a una profundidad de 280m en la Sala de las Nubes durante los primeros 6 meses de 2015. El objetivo es analizar las variaciones de CO2 con la micro-sismicidad en la zona. Para ello, se ha colocado un registrador de dióxido de carbono de tipo SENSAIR cuya frecuencia de muestreo es de 40 minutos. Se ha correlacionado los incrementos diarios en este gas con terremotos, obteniendo aumentos en 24h de hasta 300 ppm sobre un valor total cercano a 2000 ppm, en relación a terremotos localizados a menos de 15 km de la boca de la cavidad, cuya magnitud estimó el Instituto Geográfico Nacional en M3. Esta cavidad, que afecta a materiales carbonatados del Prebético Externo, se desarrolla a partir de una falla con evidencias de paleoterremotos durante el Pleistoceno Superior. Independientemente de su capacidad sismogénica, los datos muestran un aumento en la difusión y movilidad del CO2 al tránsito de ondas sísmicas., [EN] The Benis Cave is the deepest explored cave (-320m) affecting the Prebetic units of the Betic Cordillera, and it was related to an active fault. Evidence of Upper Pleistocene paleoseismic activity and the peculiar topography of the cave, hypogenic and fault-related halls, encouraged us to monitor the daily CO2 content in the air composition at depth (280m), and for a time period of six months during the early 2015. Our results show a preliminary positive correlation between micro-seismic activity in the surroundings (up to 60 km away), and the CO2 concentration (daily increasing till 300ppm for the closest microearthquakes). The maximum value of carbon dioxide recorded inside the cave was c.a. 2000 ppm, and the origin was established as pedogenic from the 13CO2 analysis. Therefore, we propose an increase in the CO2 concentration into the air karst related to the micro-seismic activity. Despite this preliminary worthy results, more data are needed to establish an accurate model for earthquake forecasting., Este trabajo ha sido financiado por los proyectos CGL2013-47412-C2-2-P, CGL2013-47412-C2-1-P y CGL2013-43324-R. Además, sus conclusiones se enmarcan dentro del proyecto CGL2012-37281-C02.01 y CGL2015-67169-P., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatial Distribution of Heavy Metals and the Environmental Quality of Soil in the Northern Plateau of Spain by Geostatistical Methods

  • Santos-Francés, Fernando
  • Martínez-Graña, Antonio Miguel
  • Ávila-Zarza, Carmelo
  • García Sánchez, Antonio
  • Alonso Rojo, Pilar
20 páginas, 6 figuras y 9 tablas, The environmental quality of soil in the central part of the Northern Plateau of Spain has been analyzed by studying the heavy metal content of 166 samples belonging to the horizons A, B and C of 89 soil profiles. The analysis to assess the environmental risk of heavy metals in the soil was carried out by means of the spatial distribution of nine heavy metals and the use of several pollution indices. The results showed that the concentration values of heavy metals (x ± S) in the superficial soil horizons were the following: With a total of 6.71 ± 3.51 mg kg −1, the contents of Cd is 0.08 ± 0.06 mg kg−1, Co is 6.49 ± 3.21 mg kg−1, Cu is 17.19 ± 10.69 mg kg−1, Cr is 18.68 ± 12.28 mg kg−1, Hg is 0.083 ± 0.063 mg kg−1, Ni is 12.05 ± 6.76 mg kg−1, Pb is 14.10 ± 11.32 mg kg−1 and Zn is 35.31 ± 14.63 mg kg−1. These nine metals exceed the values of the natural geological background level of Tertiary period sediments and rocks that form part of the Northern Plateau in Spain. Nemerow and Potential Ecological Risk indices were calculated, with the “improved” Nemerow index allowing pollution within the soil superficial horizons to be determined. The data obtained indicated that the majority of the soil (54.61%) showed low to moderate contamination, 22.31% showed moderate contamination and 21.54% of the samples were not contaminated. If we consider the Potential of Ecological Risk Index (RI), the largest percentage of soil samples showed low (70.79%) to moderate (25.38%) ecological risk of potential contamination, where the rest of the soil presented a considerable risk of contamination. The nine trace elements were divided into three principal components: PC1 (Cu, Cr, Ni, Co and Zn), PC2 (As and Hg) and PC3 (Cd). All metals accumulated in the soil came from parent rock, agricultural practices and the run-off of residual waters towards rivers and streams caused by industrial development and an increase in population density. Finally, cartography of the spatial distribution of the heavy metal contents in the soil of the Northern Plateau of Spain was generated using Kriging interpolation methods. Furthermore, the total heavy metal contents in three soil orders present in the area, namely Entisols, Inceptisols, and Alfisols, were analyzed. Other soil parameters, such as the organic matter content, pH, clay content and cation exchange capacity, was measured to determine their influence on and correlation with the heavy metal contents., This work has been supported by the USAL research projects CGL2012-37281-C02.01, CGL2015-67169-P and CGL2015-69919-R (MINECO-FEDER)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Configuration and Evolution of the Landscape from the Geomorphological Map in the Natural Parks Batuecas-Quilamas (Central System, SW Salamanca, Spain)

  • Martínez-Graña, Antonio Miguel
  • Goy, José Luis
  • Zazo, Caridad
  • Silva Barroso, Pablo Gabriel
  • Santos-Francés, Fernando
This work performs a geomorphological mapping procedure applied to the evolutionary analysis of the landscape, such that it groups different geomorphological units photointerpreted in large geomorphological domains. This allows greater utility and ease of identification and application in the different multidisciplinary studies of environmental geology and the evolution of the landscape. Geomorphological analysis allows the investigation of the reconstruction of the relief from the processes that have shaped the landscape over time. This work is a tool for the analysis of palaeolandscapes and palaeoreliefs applied to correct environmental and sustainable planning of the territory. The process starts from a morphostructural zoning in which they are grouped according to their erosive and depositional forms and the morphogenetic system to which they belong: structural, fluvial, gravitational, and polygenic. The procedure is applied to two natural parks: Batuecas and Quilamas, differentiating 18 geomorphological domains. The 2D and 3D cartographies have been implemented in virtual 3D balloons allowing a greater ease of landscape analysis in the spatial distribution of the different units over orthophotographs. The morphological and chronological evolution of the evolution of the landscape is established from the relative age of the lithological units and the geomorphological domains, as well as by their geospatial position. Georeferenced digital mapping complies with the Inspire directive for these natural spaces., This research was funded by projects from the Ministry of Economy and Competitiveness CGL2015-67169-P and CGL2015-69919-R., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-Criteria Analyses of Urban Planning for City Expansion: A Case Study of Zamora, Spain

  • Criado, Marco
  • Martínez-Graña, Antonio Miguel
  • Santos-Francés, Fernando
  • Veleda, Sergio
  • Zazo, Caridad
This study has established a methodology to determine the most environmentally suitable area for the expansion of Zamora (Spain) using geographic information system (GIS) technology. The objective was to develop a GIS-based methodology for the identification of urban peripheral areas that are suitable for the accommodation of new buildings and services, that are compliant with environmental criteria, and that guarantee an adequate quality of life for the future population such that extra construction costs are avoided. The methodological core is based on two multi-criteria analyses (MCAs): MCA-1 determines areas suitable for building—the most environmentally sustainable areas that do not present risks or discomforts to the population—by analyzing the restrictive factors; MCA-2 takes the sectors that received a favorable evaluation in MCA-1, determines which of those have a lower economic overhead for construction, and analyzes the different conditioning criteria related to their pre-existing infrastructures. Finally, the location of the sectors is determined by a decision factor that satisfies some strategic need of the municipality., This work has been supported by the USAL research projects CGL2012-37281-C02.01, CGL2015-67169-P and CGL2015-69919-R (MINECO-FEDER)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Geochemical Background and Baseline Values Determination and Spatial Distribution of Heavy Metal Pollution in Soils of the Andes Mountain Range (Cajamarca-Huancavelica, Peru)

  • Santos-Francés, Fernando
  • Martínez-Graña, Antonio Miguel
  • Alonso Rojo, Pilar
  • García Sánchez, Antonio
Concentrations of seven heavy metals (Cd, Cr, Cu, Hg, Ni, Pb, and Zn) and one metalloid (As) as well as various parameters (pH, organic carbon, granulometric analysis and cation exchange capacity) were analyzed in 77 soil samples collected in the mining areas of La Zanja and Colquirrumi (Department of Cajamarca) and Julcani (Department of Huancavelica). Our study proposed geochemical baseline values for heavy metals in a natural region (La Zanja) from samples collected during the period of the environmental impact study (2006), that is, from an earlier period which occurred at the beginning of the exploitation of the current gold mine. The baseline values obtained were as follows: 8.26 mg kg−1 for Cr; 56.97 mg kg−1 for Ni; 22, 20 mg kg−1 for the Cu; 47.42 mg kg−1 for Zn; 27.50 mg kg−1 for As; 4.36 mg kg−1 for Cd; 4.89 mg kg−1 for Hg, and 44.87 mg kg−1 for Pb. Through the use of different indices of heavy metal contamination (geo-accumulation index (Igeo), improved Nemerow index (IIN) and potential ecological risk index (RI)), the degree of pollution caused by mining activities in two areas, Colquirrumi and Julcani, which have a high density of mining sites in operation, was determined. The values obtained from these indices indicated that the Colquirrumi region was the most contaminated, followed by Julcani. The area of La Zanja, despite being free of mining operations, presented slight diffuse pollution. Several positive correlations were obtained, with a high level of significance, between pH, organic carbon content, cation exchange capacity, and the Cr, Pb and Ni concentrations of the soils. The spatial distribution of the heavy metals was realized by means of the interpolation method of ordinary kriging. The results obtained and the experience gained in this work were necessary to facilitate the identification of soil contamination processes in high altitude areas of the Andes Western Cordillera (Peru) as a basis for taking appropriate measures when restoring soils, during mine closure processes, and to protect the quality of soil resources., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), The authors would like to thank the mining company Buenaventura S. A. A. and Dr. Nicole Bernex, Director of the Applied Geography Research Center of the Pontificia Universidad Católica de of Perú for their help and support. This work has been supported by the Salamanca University (USAL) research projects CGL2012-37281-C02.01, CGL2015-67169-P and CGL2015-69919-R (MINECO-FEDER).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integration of GIS, electromagnetic and electrical Methods in the delimitation of groundwater polluted by effluent discharge (Salamanca, Spain): A case study

  • Montes, Rubén Vidal
  • Martínez-Graña, Antonio Miguel
  • Martínez Catalán, J. R.
  • Arribas, Puy Ayarza
  • Sánchez San Román, Francisco Javier
  • Zazo, Caridad
The present work envisages the possible geometry of a contaminated plume of groundwater near hospital facilities by combining GIS (Geographic Information System) and geophysical methods. The rock underlying the soil and thin sedimentary cover of the study area is moderately fractured quartzite, which makes aquifers vulnerable to pollution. The GIS methodology is used to calculate the area that would be affected by the effluent source of residual water, based on algorithms that consider ground surface mapping (slopes, orientations, accumulated costs and cost per distance). Geophysical methods (electromagnetic induction and electric resistivity tomography) use changes in the electrical conductivity or resistivity of the subsurface to determine the geometry of the discharge and the degree of contamination. The model presented would allow a preliminary investigation regarding potential corrective measures., This work has been supported by research projects CGL2012-37281-C02.01, CGL2015-67169-P and CGL2015-69919-R of the Spanish Ministry of Economy and Competitiveness, partially financed with FEDER funds. The projects were developed and carried out at the University of Salamanca., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New insights on speleoseismology: The geothermal gradient and heat flow values in caves for the study of active faults

  • Pérez López, Raúl
  • Martín-Velázquez, S.
  • Sánchez-Moral, Sergio
  • Patyniak, M.
  • López Gutiérrez, Julio César
  • Cuezva, Soledad
  • Lario, Javier
  • Silva Barroso, Pablo Gabriel
  • Rodríguez-Pascua, M. A.
  • Giner-Robles, Jorge L.
Normally in paleoseismology, the study of the tectonic slip-rate is performed in trenches on the fault scarp, or by the estimation of fault movements from the geomorphic features. In this work, we have carried out a paleoseismic analysis of the Benis Fault, located in southeast Spain, combined with a geothermal analysis inside a deep cave related to the fault (−350 m). Thus, we have estimated the last earthquake magnitude and time of occurrence from evidence of ceiling collapse and displaced carbonate blocks inside a cave, which is developed across the fault. The magnitude was obtained from the application of the empirical relationship of the fault parameters and coseismic vertical displacement, yielding a value ranging between M 5.9 and M 6.5. Moreover, we dated this paleoearthquake by the paleontological record of a “Lynx pardinus spelaea”, with an age of 65 ± 18 ka BP. Additionally, we have measured the thermal profile of the Benis Cave (−350 m of depth), from single rock point temperature measurements during 2 years. The temperature profile shows three different parts inside the cave, the shallow heterogeneous thermal zone till 50 m depth; the homogeneous thermal zone 150 m till with constant temperature and the hetero-thermal deep zone, deeper than 150 m and till the deepest zone (350 m). Furthermore, we have estimated the Vertical Geothermal Gradient, 1.85 °C/100 m for the deepest zone (−150; −290 m). The temperature increases with depth, showing a reverse thermal profile in comparison with normal gradients in deep caves. Finally, we have calculated the heat flux of 0.46 mWm., This work is a contribution of the Spanish projects SISMOSIMA CGL2013-47412-C2-2-P and CGL2015-67169-P (QTETCSPAIN-USAL), granted by the MINECO-FEDER Spanish Ministry., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of Flood Risk Due to Sea Level Rise in the Menor Sea (Murcia, Spain)

  • Martínez-Graña, Antonio Miguel
  • Gómez, Diego
  • Santos-Francés, Fernando
  • Bardají, Teresa
  • Goy, José Luis
  • Zazo, Caridad
This article analyzes the coastal vulnerability and flood risk due to sea level rise in the Menor Sea, Murcia (Spain). The vulnerability has been estimated from Sentinel-2 and Landsat 8 satellite imagery using Remote Sensing techniques. The risk of coastal flooding was calculated based on various time scenarios (X<sub>0</sub>-current, X<sub>1</sub>-100 years, X<sub>2</sub>-500 years, X<sub>3</sub>-1000 years, X<sub>4</sub>-Storm, X<sub>5</sub>-Tsunami). Geographic Information System and Remote Sensing techniques were used to build a regional model to predict changes in the mean sea level for several future scenarios, showing susceptible areas to be flooded. We have included new parameters to the model such as swell, mareal range or neotectonic factors aiming to better adjust it to the local conditions. The results showed a high risk of flooding in the barrier beach and coastal areas of the Menor Sea, with a medium to very high degree of vulnerability for the most populated and touristic areas. The maximum and minimum expected increase of the water sheet for the 100 year scenarios ranged from +4.22 to +5.69 m. This methodology can establish sectors that need structural measures to minimize the impact of the sea level rise occurring due to natural tendency in the short or long term, as well as by extreme events such as storm surges or tsunamis. Furthermore, it can be used in other areas to assist land management decision makers to reduce or mitigate the vulnerability and risk presented against the rise of the sea level., This research was funded by projects from the Ministry of Economy and Competitiveness CGL2015-67169-P and CGL2015-69919-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geomorphology applied to landscape analysis for planning and management of natural spaces. Case study: Las Batuecas-S. de Francia and Quilamas natural parks, (Salamanca, Spain)

  • Martínez-Graña, Antonio Miguel
  • Silva Barroso, Pablo Gabriel
  • Goy, José Luis
  • Elez, Javier
  • Valdés, V.
  • Zazo, Caridad
Geomorphology is fundamental to landscape analysis, as it represents the main parameter that determines the land spatial configuration and facilitates reliefs classification. The goal of this article is the elaboration of thematic maps that enable the determination of different landscape units and elaboration of quality and vulnerability synthetic maps for landscape fragility assessment prior to planning human activities. For two natural spaces, the final synthetic maps were created with direct (visual-perceptual features) and indirect (cartographic models and 3D simulations) methods from thematic maps with GIS technique. This enabled the creation of intrinsic and extrinsic landscape quality maps showing sectors needing most preservation, as well as intrinsic and extrinsic landscape fragility maps (environment response capacity or vulnerability towards human actions). The resulting map shows absorption capacity for areas of maximum and/or minimum human intervention. Sectors of high absorption capacity (minimum need for preservation) are found where the incidence of human intervention is minimum: escarpment bottoms, fitted rivers, sinuous high lands with thick vegetation coverage and valley interiors, or those areas with high landscape quality, low fragility and high absorption capacity, whose average values are found across lower hillsides of some valleys, and sectors with low absorption capacity (areas needing most preservation) found mainly in the inner parts of natural spaces: peaks and upper hillsides, synclines flanks and scattered areas. For the integral analysis of landscape, a mapping methodology has been set. It comprises a valid criterion for rational and sustainable planning, management and protection of natural spaces., This work has been supported by the research projects CGL2015-67169-P (MINECO-FEDER) and CGL2015-69919-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

El Periodo Cuaternario: La Historia Geológica de la Prehistoria, The Quaternary Period: The Geological History of the Prehistory

  • Silva Barroso, Pablo Gabriel
  • Bardají, Teresa
  • Roquero García-Casal, E.
  • Baena Preysler, J.
  • Cearreta, Alejandro
  • Rodríguez-Pascua, M. A.
  • Rosas, Antonio
  • Zazo, Caridad
  • Goy, José Luis
Este trabajo presenta una síntesis de la estratigrafía y geocronología del Periodo Cuaternario tras la actualización cronoestratigráfica aprobada por la Comisión Internacional de Estratigrafía (ICS-IUGS) y la Unión Internacional para el Estudio del Cuaternario (INQUA). Se aportan los datos más recientes sobre estratigrafía, cronología y paleoclimatología de este periodo en la Península Ibérica, así como los esquemas o fuentes bibliográficas más clásicas. Se da una visión general de la Prehistoria enmarcándola dentro de los episodios o eventos climáticos más característicos del Pleistoceno final, Holoceno y Antropoceno. Esta síntesis pretende ser una guía resumida de la cronología cuaternaria para todos aquellos investigadores que, trabajando en el Periodo Cuaternario, no poseen una formación científica adecuada al respecto., La confección del presente “trabajo de revisión” ha sido parcialmente financiada por los proyectos de investigación MINECO-FEDER: CGL2015-67169-P (USAL); CGL2015-69919-R (UAH); HAR2013-48784-C3-3-P y HAR2016- 76760-C3-2-P (UAM); CGL2016-75109-P (MNCN-CSIC); CGL2013-41083-P y Ayuda Grupos de Investigación del Gobierno Vasco IT976-16 (UPV/EHU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Secuencias marino-continentales cuaternarias en el litoral del Alentejo portugués

  • Goy, José Luis
  • Zazo, Caridad
  • Dabrio, Cristino J.
  • Moura, D.
  • Boski, Tomasz
  • Roquero García-Casal, E.
  • Martínez-Graña, Antonio Miguel
  • Lario, Javier
  • Bardají, Teresa
Trabajo presentado en el XV Reunión Nacional de Cuaternario Bizkaia Aretoa, celebrado en Bilbao (España), del 1 al 5 de julio de 2019, A detailed geomorphological map allowed to define the complex relationships between the morphostructural framework and the development of sedimentary units both marine and terrestrial along the Quaternary in the littoral area of the Alentejo (Portugal). Outcrops along Ribª do Morgadel and River Mira allowed to reconstruct a sequence of up to fourteen staircased marine terraces. In the beach of Pessegueiro Fort, a beach-dune sequence has been attributed to MIS5 in basis of OSL, 14C and U-series dating, with the beach being located at +0.5m. At Praia da Pegada, another beach deposit located at +2-4 m, has been attributed to MIS5. This chronology postdatesprevious chronological interpretations, Financiado con los Proyectos FEDER-MINECO CGL2015-69919-R (UAH) y CGL2015-67169-P (USAL), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Holocene aeolian dunes in the National and Natural Parks of Doñana (SW Iberia): Mapping, geomorphology, genesis and chronology

  • Goy, José Luis
  • Zazo, Caridad
  • Dabrio, Cristino J.
  • Martínez-Graña, Antonio Miguel
  • Lario, Javier
  • Borja, Francisco
  • Bardají, Teresa
The dune fields of the National and Natural Parks of Doñana are considered one of the most outstanding dune fields in Western Europe. They are located at the west margin of the Guadalquivir river estuary. The accumulation of aeolian sands partly blocks the connection between the ample Guadalquivir River estuary and the Gulf of Cádiz in the Atlantic Ocean. The sand units form a large oval dome, the “Abalario Dome” which connects with the large Doñana Spit Bar where dune systems accumulated as well, at least in part coevally with the spit growth. The most frequent dune morphologies are parabolic or transverse. The degree of activity was classified as stable, semi-active and active. Most stable dunes concentrate on the Abalario Dome, whereas active dunes occur mainly on the Doñana spit bar. Relative chronology was established from the superposition of dune Systems and Subsystems deduced from photogeology coupled with field surveys, orthophotos, and oblique and 3D images. Sampling and radiogenic dating (Optically Stimulated Luminescence-OSL) allowed to date eight dune Systems named as Systems I to VII plus an additional CS, which is a laterally equivalent to part of S IV, V and VI. The proposed ages are: System I, age 11.1 38 to 9.5 ky BP, perhaps extending to 8.5 ky BP. System II, 8.2 to 6.1 ky BP. System III, 5.9 to 2.6 ky BP. 39 System IV, 2.6 to 1.6 ky BP. System V, 1.6 to 1.3 ky BP. System VI, 1.2 to 0.7 ky BP. System VII, 0.7 to 40 0.15 ky BP. The age of the Complex System is 2.2 to 0.15 ky BP. Additionally, it was concluded that genesis of the somewhat-different Complex System (CS) was related to the increased accumulation space created by movements (sliding) along the Mazagón and Torre del Loro faults following major regional seismic activity., Supported by Spanish FEDER-MINECO (projects CGL2015-69919-R, CGL2015-67169-P, HAR2011-23798 and CSO2011-24425) and OAP036/2008., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tabla Cronoestratigráfica del Cuaternario de la Península Ibérica v 3.0

  • Silva Barroso, Pablo Gabriel
  • Bardají, Teresa
  • Baena Preysler, J.
  • Giner-Robles, Jorge L.
  • Van der Made, Jan
  • Zazo, Caridad
  • Rosas, Antonio
  • Lario, Javier
La tercera edición de la Tabla Cronoestratigráfica del Cuaderno de la península ibérica (v 3.0) sustituye a las versiones más antiguas editadas en 2007 (v 1.0) y 2009 (v 2.0). Desde esta fecha la Comisión Internacional de Estratigrafía (ICS), y más concretamente la Subcomisión de Estratigrafía del Cuaternario (SQS), ha estado trabajando tanto en la definición del Periodo Cuaternario como en sus subdivisiones, aportando nuevos GSSP (Global Stratotype Section and Points) para los mismos. La nueva tabla incluye los GSSPs recientemente aprobados para la subdivisión de la Serie Holocena (Groenlandiense, Norgripiense y Meghalayense), así como el nuevo piso Chibaniense (774,1 - 128,0 ka) ratificado por la IUGS a principios del 2020, que sustituye al Pleistoceno medio. Esta versión 3.0 también incluye todas las modificaciones y correcciones que han surgido desde entonces, incluyendo la actualización de datos, fechas y dataciones para los yacimientos paleontológicos y/o arqueológicos más representativos de la península. Asimismo, se ha revisado la extensión de los diferentes periodos climáticos considerados para Europa central y Alpes ajustándose a las biozonas de mamíferos y las faunas asociadas. La extensión de estas últimas ha de entenderse referida a Europa central y meridional no solo a la península ibérica. En la distribución temporal de periodos de la prehistoria y complejos tecno-culturales asociados se diferencia entre el continente africano y europeo. De la misma forma la sucesión de especies de homininos se centra también en estos dos continentes. Esta revisión ofrece una lista de referencias actualizada, así como una versión digital interactiva que se implementará próximamente., La confección del artículo ha sido parcialmente financiada por los proyectos de investigación MINECO-FEDER: CGL2015-67169-P (USAL); CGL2015-69919-R (UAH); HAR2016-76760-C3-2-P y PID2019-103987GB-C33 (UAM); CGL2016-75109-P (MNCN-CSIC); CGL2013-41083-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strain 3D analysis and kinematics of the Middle American Trench in the junction of the Rivera and Cocos plates with the North-American and Caribbean plates, Análisis 3D de la deformación y cinemática de la Fosa Mesoamericana en la confluencia entre las placas de Rivera y Cocos con las placas Caribe y Norteamericana

  • Giner-Robles, Jorge L.
  • Pérez López, Raúl
  • Elez, Javier
  • Silva Barroso, Pablo Gabriel
  • Roquero García-Casal, E.
  • Ramos, Adrià
  • Canora Catalán, Carolina
  • Rodríguez Escudero, Emilio
  • Rodríguez-Pascua, M. A.
28 p., [EN] In this work, we propose a kinematic model based on the strain 3D spatial distribution from focal mechanism solutions of instrumental earthquakes located along the Middle American Trench, in the convergence zone of Rivera and Cocos plates with North-American and Caribbean tectonic plates. We have used more than 1300 focal mechanisms of earthquakes (M ≥ 5.5), from the Global Centroid-Moment-Tensor (CMT) online global program to perform a cluster analysis of the spatial distribution of the tectonic strain tensor (ey, ex, ez) and its shape (k’). Accordingly, we have applied the Right Dihedral Method to a population of geographically clustered focal mechanisms, as well as the Slip Method, based on the slip data on the theoretical fault plane, for determining the extensional, compressive, and strike-slip zones, in correspondence with the principal tectonic features. Furthermore, we have realized 14 depth profiles across the Middle American Trench (MAT) of the shape of the strain tensor and ternary Kaverina diagrams for constraining the tectonic deformation and developing a 3D model of the kinematics in the region. This analysis depicts a Zonation in relation with the changing subduction angle of the slab and an increase of the convergence rate towards the SE, resulting from the mechanical coupling of the subduction, and showing less thrust earthquakes at the Rivera-North American convergence zone than at the Cocos-North American one. The proposed 3D geometry is in good agreement with the spatial distribution of large earthquakes, the slab dip angle, the presence of mantle currents at a 100 km depth and the occurrence of normal-type earthquakes. This model could also account for the presence of anomalous earthquakes such as slow and silent earthquakes in the Guerrero Gap., [ES] Este trabajo propone un modelo cinemático 3D de la confluencia de las placas tectónicas Norteamericana y Pacífica con las placas de Rivera y Cocos, centrado en la zona de convergencia de la Fosa Mesoamericana en el área de México. A partir del análisis de más de 1300 mecanismos focales de terremotos (M ≥ 5.5) obtenidos de la base de datos en abierto del programa Global Centroid-Moment-Tensor (CMT), se han aplicado diversas técnicas de geología estructural para obtener la distribución espacial de los tensores de deformación (ey, ex, ez) y del factor de forma (k’) de dichos tensores. Estas técnicas consisten en el estudio de los Diedros Rectos de los mecanismos focales y de la aplicación del Modelo de Deslizamiento, basados en la cinemática del deslizamiento sobre el plano de falla teórico asociado a cada sismo. Este análisis permite Realizar un estudio tridimensional de la deformación mediante el agrupamiento espacial 3D de los diferentes tensores (análisis cluster), agrupando zonas homogéneas en estilos de deformación, junto con los diagramas triangulares de clasificación de mecanismos focales (Kaverina) en relación con la geometría de la subducción y de la presencia de flujos mantélicos. También se han calculado perfiles profundos de la deformación y del factor de forma (k’) en relación a la geometría de la subducción y las principales estructuras tectónicas. Los resultados muestran una zonación 3D influenciada por el ángulo de subducción y el aumento de la velocidad de convergencia hacia el SE, en relación al acoplamiento mecánico de la subducción, apareciendo menos terremotos inversos en la convergencia de la Placa de Rivera con la Placa Norteamericana, frente a la Placa de Cocos con la Placa Norteamericana. La geometría 3D propuesta es congruente con la distribución espacial de grandes terremotos, el ángulo de subducción, la presencia de corrientes mantélicas a 100 km de profundidad y la presencia de terremotos en fallamiento normal. Este modelo también podría explicar la presencia de terremotos anómalos como terremotos lentos y silenciosos en el Gap de Guerrero., Este trabajo ha sido financiado parcialmente por los proyectos del Plan Nacional de I+D+i del Ministerio de Ciencia e Innovación de España con referencias 3GEO CGL2017‐83931‐C3‐2‐P y MINECO-FEDER CGL2015-67169-P (QTECSPAIN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

The Baelo Claudia Tsunami Archive (SW Spain)—Archaeological Deposits of High-Energy Events

  • Reicherter, Klaus
  • Prados, Fernando
  • Jiménez-Vialás, Helena
  • García Jiménez, Iván
  • Feist, Lisa
  • Val-Peón, Cristina
  • Höbig, Nicole
  • Mathes-Schmidt, Margret
  • López Sáez, José Antonio
  • Röth, J.
  • Alexiou, Simoni
  • Silva Barroso, Pablo Gabriel
  • Cämmerer, Christoph
  • Borau, Laetitia
  • May, Simon Matthias
  • Kraus, Werner
  • Brückner, Helmut
  • Grützner, Christoph
Over the past decades, substantial progress has been made in tsunami research. Be that as it may, little is still known about tsunami deposits and their related depositional mechanisms in coastal areas in historical and archaeological contexts. In particular, the Phoenician, Greek and Roman trade and military networks along the Mediterranean and Atlantic coasts, with their cities, harbours and additional facilities, are susceptible to serving as archives for extreme wave events. The ruins of the Roman city of Baelo Claudia, located on the Bay of Bolonia Bay (southern Spain), offer a unique environment for studying historical tsunamis in the Gulf of Cadiz. Baelo Claudia suffered at least two earthquakes in Roman times, namely, in the first and fourth centuries CE. The latter, associated with a tsunami, led to the city’s destruction and subsequent decline. Accordingly, three tsunami deposits in Baelo Claudia, dated to ca. 4000 cal BP (2000 BCE), ca. 400 CE and 1755 CE, the last corresponding to the Lisbon tsunami, are described here. The multi-disciplinary research conducted on the sedimentary, archaeological and palaeontological records has revealed event deposits, together with major landscape changes in the environs of the bay after tsunami landfall. Furthermore, the significant archaeoseismic damage detected in recently excavated buildings has been dated to the end of the fourth-century CE. The results presented here serve to supplement the earthquake and tsunami record of coastal Iberia., The authors are grateful to German Science Foundation (DFG grant, RE 1361/28-1) and the MINECO-FEDER Spanish Research Project CGL2015-67169-P (QTECSPAIN-USAL) for their support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The AD 1755 Lisbon Earthquake-Tsunami: Seismic source modelling from the analysis of ESI-07 environmental data

  • Silva Barroso, Pablo Gabriel
  • Elez, Javier
  • Pérez López, Raúl
  • Giner-Robles, Jorge L.
  • Gómez Diego, Pedro V.
  • Roquero García-Casal, E.
  • Rodríguez-Pascua, M. A.
  • Bardají, Teresa
[EN] This work presents a macroseismic analysis of the AD 1755 Lisbon Earthquake-Tsunami event by means of the combination of intensity data derived from the EMS-98 scale and the ESI-07 scale (Environmental damage). About 600 records of secondary earthquake environmental effects (EEEs) for the whole Spain have been used to define intensities, focused on the SW portion of the Iberian Peninsula. The Spanish data have been complemented with 308 EEEs records from Portugal. The analyses indicate maximum intensities of X EMS-ESI along the Atlantic margin of the Iberian Peninsula with 76 records of Tsunami environmental effects (TEEs). An important amplification (VIII – VII) occurred all along the Guadalquivir basin and the adjacent Betic front at epicentral distances of 300–700 km. In these zones 55 records of ground effects (ground cracks, Liquefactions and slope movements) are catalogued. In the rest of the territory of the Peninsula the most widespread effects were hydrogeological changes with 505 records in Spain and 196 in Portugal (total 701 records) covering all the intensity levels. Increase of flow discharges in springs and elevation of water level in wells was the common groundwater response to seismic shacking, especially in SW Iberia. In this zone water elevation in wells was between 5 and 3 m and persistent increases of discharges long-lasting (several days to two months). Persistent discharges on springs were linked in 143 cases to important SW-NE crustal faults (e.g., Alentejo-Plasencia Fault). From the Intensity distribution the historic seismic scenarios are explored by means of the development of empirical ShakeMaps. These consider the three classical seismic sources proposed for this earthquake: Gorringe Bank (G); Marques de Pombal Fault (M) and Atlantic delamination beneath the Gulf of Cadiz (C). However, individually these seismic sources are too small and unable to generate the resulting seismic scenario depicted by the intensity map developed in this work, with onshore seismic accelerations (PGA) up to 0.82 g. These acceleration values and the great amplification experienced throughout the Guadalquivir basin (0.34–0.52 g) are only possible considering a combination of the three seismic sources (GMC Source) probably related to shallow subduction or lithospheric delamination beneath SW Iberia and the Gulf of Cadiz. This will suggest an NNE-SSW offshore rupture length of 350–360 km with an overall rupture area of c. 84,500 km2 resulting in an event magnitude 8.6 Mw calculated from empirical relationships. The results demonstrate the efficacy of these kind of approaches for better identifying and modelling seismic sources for historical events., This work was supported by the Spanish Research Project MINECO-FEDER CGL2015-67169-P (QTECSPAIN - USAL)., Peer reviewed