Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface study of cerium oxide based coatings obtained by cathodic electrodeposition on zinc

  • Martínez Orellana, Lidia
  • Román García, Elisa Leonor
  • Segovia, J. L. de
  • Poupard, S.
  • Creus, J.
  • Pedraza, F.
[EN] A surface study of electrodeposited cerium oxide based coatings is presented. Different surface analytical techniques were used in order to obtain complementary information to fully characterize such complex systems. X-ray Photoelectron Spectroscopy was used as the main technique to determine the surface composition of the coating. The analysis of the core level peaks of the elements provides additional information about the functional groups present on the surface. A mixture of Ce (III) and Ce (IV) was found in the coating and their proportion was calculated at different depths. The analysis of the O 1s core level peak revealed a triple structure whose origin will be discussed. To support the results obtained, electron stimulated desorption was performed. The study was completed with Auger electron spectroscopy and Raman spectroscopy, both techniques having different surface sensitivities. From all these results, it is derived that incomplete electrochemical reactions occurred during the growth of the coatings. This led to rather complex compositions, in which defective cerium oxides are the major species. In addition, hydroxides, carbonates and nitrates are also present, together with adsorbed water. © 2011 Elsevier B.V. All rights reserved., L.M. and E.R. acknowledge the Spanish Ministerio de Ciencia e Innovación (CSD2007-00041, MAT2008-01497/NAN, CIT-420000-2009-53).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of friction on the surface characteristics of EPDM elastomers with different carbon black contents

  • Martínez Orellana, Lidia
  • Nevshupa, Roman
  • Felhos, D.
  • Segovia, J. L. de
  • Román García, Elisa Leonor
[EN] Tribological properties and surface characteristics of ethylenepropylene- diene elastomers were studied as a function of carbon black (CB) content. The surface analysis was performed inside and outside the wear track by X-ray photoelectron spectroscopy (XPS) in order to evaluate possible compositional changes produced by rubbing. Carbon black content had only a small influence on the surface chemistry of the unworn surfaces. However, on the surfaces subjected to friction, the oxygen concentration decreased with increasing CB content. Neither the surface analysis by XPS nor the wettability tests revealed important thermal degradation of the polymer in these friction tests. © 2011 Elsevier Ltd. All rights reserved., financial support of the EU from the 6th Framework Programme in the KRISTAL project no. 515837-2. L.M. and E.R. acknowledge the Nanoselect project (CSD2007-00041). L.M., R.N. and E.R. also acknowledge the financial support from the Spanish Ministry for Science and Innovation within the CaTri project (CIT-420000-2009-53) and R.N. acknowledges a ‘‘Ramón y Cajal’’ Grant (RYC-2009-04125) from the Spanish Ministry for Science and Innovation., Peer reviewed