Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

ARINC653 Channel Robustness Verification Using LeonViP-MC, a LEON4 Multicore Virtual Platform

  • Sánchez Sánchez, Jonatan|||0000-0002-4503-2984
  • Da Silva Fariña, Antonio|||0000-0002-3737-743X
  • Parra Espada, Pablo|||0000-0002-4242-8297
  • Rodríguez Polo, Óscar|||0000-0002-7893-4247
  • Martínez Hellín, Agustín|||0000-0002-5600-9253
  • Sánchez Prieto, Sebastián|||0000-0002-6729-7932
Multicore hardware platforms are being incorporated into spacecraft on-board systems to achieve faster and more efficient data processing. However, such systems lead to increased complexity in software development and represent a considerable challenge, especially concerning the runtime verification of fault-tolerance requirements. To address the ever-challenging verification of this kind of requirement, we introduce a LEON4 multicore virtual platform called LeonViP-MC. LeonViP-MC is an evolution of a previous development called Leon2ViP, carried out by the Space Research Group of the University of Alcalá (SRG-UAH), which has been successfully used in the development and testing of the flight software of the instrument control unit (ICU) of the energetic particle detector (EPD) on board the Solar Orbiter. This paper describes the LeonViP-MC architectural design decisions oriented towards fault-injection campaigns to verify software fault-tolerance mechanisms. To validate the simulator, we developed an ARINC653 communications channel that incorporates fault-tolerance mechanisms and is currently being used to develop a hypervisor level for the GR740 platform., Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Memory management unit for hardware-assisted dynamic relocation in on-board satellite systems

  • Losa Cruz, Borja|||0000-0003-4748-6944
  • Parra Espada, Pablo|||0000-0002-4242-8297
  • Da Silva Fariña, Antonio|||0000-0002-3737-743X
  • Rodríguez Polo, Óscar|||0000-0002-7893-4247
  • García Tejedor, Juan Ignacio|||0000-0003-1397-5950
  • Martínez Hellín, Agustín|||0000-0002-5600-9253
  • Sánchez Sánchez, Jonatan|||0000-0002-4503-2984
  • Sánchez Prieto, Sebastián|||0000-0002-6729-7932
  • Guzmán García, David
Satellite on-board systems spend their lives in hostile environments, where radiation can cause critical hardware failures. One of the most radiation-sensitive elements is memory. The so-called single event effects (SEEs) can corrupt or even irretrievably damage the cells that store the data and program instructions. When one of these cells is corrupted, the program must not use it again during execution. In order to avoid rebuilding and uploading the code, a memory management unit can be used to transparently relocate the program to an error-free memory region. This article presents the design and implementation of a memory management unit that allows the dynamic relocation of on-board software. This unit provides a hardware mechanism that allows the automatic relocation of sections of code or data at run-time, only requiring software intervention for initialization and configuration. The unit has been implemented on the LEON architecture, a reference for the European Space Agency (ESA) missions. The proposed solution has been validated using the boot and application software (ASW) of the instrument control unit of the Energetic Particle Detector of the Solar Orbiter Mission as a base. Processor synthesis on different FPGAs has shown resource usage and power consumption similar to that of a conventional memory management unit. The results vary between ± 1?15% in resource usage and ± 1?7% in power consumption, depending on the number of inputs assigned to the unit and the FPGA used. When comparing performance, both the proposed and conventional memory management units show the same results., Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Tailor-made Virtualization Monitor Design for CPU Virtualization on LEON Processors

  • Parra Espada, Pablo|||0000-0002-4242-8297
  • Da Silva Fariña, Antonio|||0000-0002-3737-743X
  • Losa Cruz, Borja|||0000-0003-4748-6944
  • García Tejedor, Juan Ignacio|||0000-0003-1397-5950
  • Rodríguez Polo, Óscar|||0000-0002-7893-4247
  • Martínez Hellín, Agustín|||0000-0002-5600-9253
  • Sánchez Prieto, Sebastián|||0000-0002-6729-7932
In recent decades, mixed-criticality systems have been widely adopted to reduce the complexity and development times of real-time critical applications. In these systems, applications run on a separation kernel hypervisor, a software element that controls the execution of the different operating systems, providing a virtualized environment and ensuring the necessary spatial and temporal isolation. The guest code can run unmodified and unaware of the hypervisor or be explicitly modified to have a tight coupling with the hypervisor. The former is known as full virtualization, while the latter is known as para-virtualization. Full virtualization offers better compatibility and flexibility than para-virtualization at the cost of a performance penalty. LEON is a processor family that implements the SPARC V8 architecture and whose use is widespread in the field of space systems. To the best of our knowledge, all separation kernel hypervisors designed to support the development of mixed-criticality systems for LEON employ para-virtualization, which hinders the adaptation of real-time operating systems. This article presents the design of a Virtualization Monitor that allows guest real-time operating systems to run virtualized on LEON-based systems without needing to modify their source code. It is designed as a stand-alone component within a hypervisor and incorporates a set of techniques such as static binary rewriting, automatic code generation, and the use of operating system profiles. To validate the proposed solution, tests and benchmarks have been implemented for three guest systems, RTEMS, FreeRTOS, and Zephyr, analyzing the overhead introduced in certain situations characteristic of real-time applications. Finally, the same benchmarks have been run on AIR, one of the hypervisors that uses para-virtualization. The results obtained show that the use of the proposed techniques allows us to obtain similar results to those obtained using para-virtualization without the need to modify the source code of the guest real-time operating systems., Universidad de Alcalá