Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-controlled assembly and disassembly of cyclodextrin-bisazobenzene supramolecular complexes

  • Fernández-Clavero, Carlos
  • Rivero-Barbarroja, Gonzalo
  • Carmona, Thais
  • García-Iriepa, Cristina
  • Marcelo, Gema
  • Tros de Ilarduya, Conchita
  • Ortiz-Mellet, Carmen
  • García Fernández, José Manuel
  • Benito, Juan M.
  • Mendicuti, Francisco
The inclusion complexation of a water soluble bis-azobenzene derivative (bis-Azo) and its monotopic analog (mono-Azo) with α-, β-, and γ-cyclodextrins (CyDs) was investigated as a prototype for light-responsive self-assembling systems. Using spectroscopic techniques (UV–vis, induced circular dichroism, 1H NMR), computational methods (molecular mechanics and dynamics), and thermodynamic analyses, we examined the photoswitching properties, stability, and structural dynamics of these systems. The azobenzene moieties in the E-isomer of mono-Azo and bis-Azo consistently showed strong affinity for the αCyD cavity, characterized by high association constants. In contrast, no complex formation was observed upon photoinduced E-to-Z isomerization. For bis-Azo, this implies the formation of supramolecular αCyD dimers, with the spatial separation between the oppositely oriented host components determined by the connector linking the two azobenzene moieties in the E-configured ditopic guest. This complex disassembles upon photoswitching, driven by the structural disruption associated with the Z-form. Both the E-and Z-isomers fitted in the cavity of βCyD, with moderate selectivity towards the E-form. A similar scenario was found for complexes with γCyD when using low concentrations of the host. Interestingly, at high concentrations γCyD formed low-solubility pseudopolyrotaxane-type supramolecular architectures with bis-Azo, which were disrupted upon Z-isomer photoisomerization. All the complexes demonstrated high fatigue resistance, maintaining structural integrity after multiple isomerization cycles. This work advances the design of stimuli-responsive preorganized supramolecular systems, with potential applications in nucleic acid delivery through dual pH/light-sensitive mechanisms., We acknowledge the Ministerio de Ciencia, Innovación y Universidades and the Agencia Estatal de Investigación, AEI/10.13039/501100011033, the ‘‘ERDF A way of making Europe’’ (PID2021-124247OB-C21, PID2021-124247OB-C22, PID2022-141034OB-C21, PID2020-118384GB-100 and CNS2022-135568) and the UAH (PIUAH23/CC-017). We also acknowledge funding by the European Union’s Horizon Europe research and innovation programme under the Marie Skłodowska-Curie grant agreement 101130235–Bicyclos and the PTI + Global Health (CSIC). The CITIUS (Univ. Seville) is additionally acknowledged for technical support. G.R.-B enjoyed a PhD fellowship (Grant number FPU18/02922). C. F.-C. is grateful for the FPU-UAH grant awarded (2023/00196)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural and optical properties of rare earth doped low melting point phosphate glasses

  • Pecharromán, Carlos
  • Marcelo, Gema
  • González, Sara
  • Hosseinpour, Maryam
  • Menéndez, José Luis
  • Cabal, Belén
A Low Melting Point Phospate Glass (LMMPG) has been doped with five rare earth (RE) cations, specifically Nd, Sm, Eu, Tb and Er, as well as double doping with Eu-Tb, which encompass most of the 4f period. They were prepared by a melt-quenching method, using a phosphate glass with chemical composition (mol.%) 45 P2O5, 10 CaO, and 45 Na2O, where 1 mol.% of calcium oxide was substituted with the corresponding rare earth oxide. Whereas melting point of glasses is approximately 550 °C, doped LMPPG beads were obtained from melt at 900 °C, in order to reduce the viscosity which is a key factor to remove bubbles. However, such a low temperature prevented us to employ RE oxides, as refractory RE oxides, as they may be not completely solved, introducing optical defects in the solid bodies. Instead, RE cations were supplied by means of chlorides, which decompose at temperatures very close to the melting point of the LMPPG, preventing the formation of RE oxides. As a result, beads exhibit a high degree of transparency which has a beneficial effect in the luminescent properties. Quantitative structural characterization by 31P NMR, FTIR, and DTA determines that RE cations strongly bond to the phosphate chain edges. This interaction enhances the glass stability as well as allowing a perfect dispersion of these cations inside the matrix, minimizing quenching and self-absorption processes. Additionally, it has been showed, that multiple doping is also accepted by the amorphous matrix, in such manner that different color hues can be obtained. This versatile and high quality doped glasses could be employed as visible and infrared light sources, anti-counterfeit materials, and other photonic applications which requires efficient emitters based on RE., We thank the Ministry of Science, Innovation and Universities of Spain for the funding through the projects: CNS2022-135568 and PID2020-119130GB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Color and crystal photonic structure in high density microgels determined by spectroscopic diffuse reflectance at the optical range

  • Marcelo, G.
  • Longobardi, Vincenzo
  • Sbera, Larisa G.
  • Mendicuti, F.
  • Pecharromán, Carlos
Ionic PNIPAM microgels in water present the ability to locally self-organize into different microscopic three-dimensional photonic structures. The properties of these arrangements depend on the concentration, temperature, pH, etc, making them a very appealing system to model crystalline structure and design new tuneable photonic devices. However, as these small crystallites are only stable in aqueous suspension in random orientations and they present a very low optical contrast the quantitative description of their optical properties became quite difficult. Herewith, we propose a novel physical model applied to diffuse reflectance spectra, which allows studying the most challenging system, the high-concentrated microgel dispersions (104–129 mg/mL) of PNIPAM microgels copolymerized with methacrylic acid (PNIPAM-MAA), also known as glassy phase. In fact, at this range of weight concentration, microgels are nearly transparent but with uniform colors originated by the presence of photonic microcrystals. By the proposed methodology, it has made possible to correlate the optical properties with the crystallographic structure. Consequently, our results seem to point out that, in the concentrated regime, two crystalline arrangements coexist in the photonic PNIPAM-MAA arrangements: a dominant Body-Centered Cubic (BCC) structure with a smaller fraction of Face-Centered Cubic (FCC)., We thank the Ministry of Science and Innovation for the funding through the projects: CNS2022-135568, PLEC2022-009381 and PID2020-119130GB-I00., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Light-controlled assembly and disassembly of cyclodextrin-bisazobenzene supramolecular complexes

  • Fernández Clavero, Luis Carlos
  • Rivero Barbarroja, Gonzalo
  • Carmona Pérez, Thais|||0000-0002-6279-4323
  • García Iriepa, Cristina|||0000-0002-7577-8242
  • Marcelo Alejandre, Gema|||0000-0003-4955-7400
  • Tros de Ilarduya, Conchita
  • Ortiz Mellet, Carmen
  • Garcia Fernandez, Jose Manuel
  • Benito, Juan M.
  • Mendicuti Madrid, Francisco Enrique Javier|||0000-0001-7930-2703
15 p., The inclusion complexation of a water soluble bis-azobenzene derivative (bis-Azo) and its monotopic analog (mono-Azo) with alpha-, beta-, and gamma-cyclodextrins (CyDs) was investigated as a prototype for light-responsive selfassembling systems. Using spectroscopic techniques (UV-vis, induced circular dichroism, 1H NMR), computational methods (molecular mechanics and dynamics), and thermodynamic analyses, we examined the photoswitching properties, stability, and structural dynamics of these systems. The azobenzene moieties in the Eisomer of mono-Azo and bis-Azo consistently showed strong affinity for the alpha CyD cavity, characterized by high association constants. In contrast, no complex formation was observed upon photoinduced E-to-Z isomerization. For bis-Azo, this implies the formation of supramolecular alpha CyD dimers, with the spatial separation between the oppositely oriented host components determined by the connector linking the two azobenzene moieties in the Econfigured ditopic guest. This complex disassembles upon photoswitching, driven by the structural disruption associated with the Z-form. Both the E-and Z-isomers fitted in the cavity of beta CyD, with moderate selectivity towards the E-form. A similar scenario was found for complexes with gamma CyD when using low concentrations of the host. Interestingly, at high concentrations gamma CyD formed low-solubility pseudopolyrotaxane-type supramolecular architectures with bis-Azo, which were disrupted upon Z-isomer photoisomerization. All the complexes demonstrated high fatigue resistance, maintaining structural integrity after multiple isomerization cycles. This work advances the design of stimuli-responsive preorganized supramolecular systems, with potential applications in nucleic acid delivery through dual pH/light-sensitive mechanisms., Agencia Estatal de Investigación, Ministerio de Ciencia, Innovación y Universidades, Universidad de Alcalá, Consejo Superior de Investigaciones Científicas, Fondo Europeo de Desarrollo Regional, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Liposomal encapsulation of camptothecin/carboxymethyl-beta-cyclodextrin complexes: stability, solubility and cytotoxicity

  • Mesías Recamán, Fernando
  • Durán Moreno, Alba
  • Carmona Pérez, Thais|||0000-0002-6279-4323
  • Marcelo Alejandre, Gema|||0000-0003-4955-7400
  • Mendicuti Madrid, Francisco Enrique Javier|||0000-0001-7930-2703
23 p., The clinical utility of the anticancer drug camptothecin (CPT) is limited by its poor aqueous solubility and instability in the bloodstream, hindering bioavailability and efficacy. This study explores the complexation of CPT with carboxymethyl-beta-cyclodextrin (cmβCD) to overcome these limitations. Fluorescence spectroscopy and molecular modeling demonstrated 1:1 inclusion complexes, with stability constants governed by electrostatic interactions that were inversely correlated with pH. To validate this effect, a cationic amino-betacyclodextrin (amβCD) was used as a mechanistic control, revealing that Coulombic forces significantly modulate binding strength and stoichiometry. Crucially, cmβCD enhanced CPT solubility by up to 11-fold at 14 × 10−3 moldm−3 , enabling a 385-fold increase in drug loading into liposomal carriers compared to the cyclodextrin-free system. Fluorescencebased release studies indicated high liposomal stability at physiological pH and partial CPT release under acidic conditions. Furthermore, CPT-loaded liposomes demonstrated cytotoxicity against cancer cell lines, particularly BT-474, with IC50 values generally comparable to or slightly higher than those of free CPT and the CPT:cmβCD complex, likely due to the distinct lysosomal cellular uptake pathway. This work highlights cmβCD complexation as a promising strategy to enhance CPT solubility and liposomal loading for improved drug delivery., Ministerio de Ciencia, Innovación y Universidades, Universidad de Alcalá