RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación
Artículo científico (JournalArticle)
Monitoring holograms for therapeutic ultrasound using passive cavitation beamforming
[EN] Acoustic holograms can generate cavitation patterns of complex spatial distribution by shaping and steering the
focal spot of therapeutic ultrasound systems. However, when monitoring these systems by passive cavitation
detection, off-axis therapeutical targets and the receiver directivity may not be aligned. In this paper, we
present passive cavitation beamforming to monitor a therapeutical ultrasound system using holograms targeted
to arbitrary locations, in which both therapeutic and passive cavitation monitoring systems use 3D-printed
acoustic lenses. The therapeutic system uses an acoustic hologram to focus the ultrasound beam on the target,
which is off-axis. Then, a second lens is designed to beamform the cavitation signals which emerge from the
therapeutic target, steering the directivity of the passive cavitation detector in the direction of the therapeutic
focus and, in addition, compensating for skull aberrations. The system is experimentally tested with an ex-vivo
macaque skull and a blood vessel phantom with microbubbles. In addition, results are compared with a standard
confocal configuration and an off-axis configuration in the absence of the monitor lens. A parametric study is
performed by varying the amplitude of the emitted signal and the impact on the behaviour of the microbubbles
is analysed based on the cavitation index values. Results show that monitoring holograms align the passive
cavitation detector response with the focal spot of the targeted therapeutic transducer. These holograms encode
a fixed beamformer for cavitation signals in reception, increasing the sensitivity of cavitation emission at the
target. In this way, cavitation doses can be used to locally monitor the cavitation activity of microbubbles, thus
opening a new path to low-cost monitoring of therapeutic ultrasound systems., This research has been supported by the Ministerio Español de Ciencia e Innovación and the Ministerio de Universidades grants FJC2019-040453-I, RYC2021-034920-I, FPU19/00601 and Agencia Estatal de Investigación grants PID2022-142719OB-C21 and CNS2023-145707 funded by MCIN/AEI/10.13039/501100011033; Agència Valenciana de la Innovació grants INNVA2/2022/11 and INNEST/2022/345; Generalitat Valenciana grants EDGJID/2021/189, CIGE/2021/175, CIAICO/2023/052, CIPROM/2021/003, FDEGENT/2019/004 and IDIFEDER/2021/004.
Proyecto:
Agencia Estatal de Investigación / Plan Estatal de Investigación Científica y Técnica y de Innovación 2021-2023 PID2022-142719OB-C21
,
Generalitat Valenciana / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 CIGE/2021/175
,
Generalitat Valenciana / Proyectos Consolidación Investigadora CIAICO/2023/052
,
Generalitat Valenciana / Contrato Juan de la Cierva Formación CIPROM/2021/003
,
Generalitat Valenciana FDEGENT/2019/004
,
Generalitat Valenciana IDIFEDER/2021/004
,
Ministerio de Ciencia RYC2021-034920-I
,
Innovación y Universidades EDGJID/2021/189
,
European Science Foundation INNVA2/2022/11
,
Agència Valenciana de la Innovació INNEST/2022/345
,
Agència Valenciana de la Innovació FPU19/00601
,
Ministerio de Universidades CNS2023-145707
,
Agencia Estatal de Investigación FJC2019-040453-I