Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Non-purged voltammetry explored with AGNES

  • Aguilar, David
  • Galceran i Nogués, Josep
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Parat, C.
  • Authier, L.
  • Potin-Gautier, M.
The reduction of oxygen increases pH in the surroundings of an electrode. A theoretical model estimates the steady-state pH profile from the surface of the electrode up to the bulk solution. A very simple formula predicts that, in non-deareated solutions, for bulk pH-values between 4.0 and 10.0, the corresponding surface pH could be as high as 10.3, regardless of the thickness of the diffusion layer and composition of the sample (except if it has a buffering capacity). For bulk pH lower than 3.0 or higher than 10, pH increases are negligible. Less steep pH-profiles are obtained with buffers (such as MOPS 0.01 M or MES 0.01 M). The change in surface pH modifies the local speciation and hinders the standard interpretation of voltammetric responses. The electroanalytical technique Absence of Gradients and Nernstian Equilibrium Stripping (AGNES), implemented with Screen Printed Electrodes (SPE), provides experimental insights into this phenomenon. AGNES probes the free metal concentration at the electrode surface, from which the surface pH can be estimated for systems of known composition. These estimations agree with the theoretical model for the assayed systems. Additionally, the quantification of the bulk free Zn2+ and Cd2+ concentrations with specific modifications of AGNES for non-purged synthetic solutions is discussed. In general, more accurate determinations of the bulk free metal concentrations in non-purged solutions are expected: i) when the calibration is performed in a medium where the pH increase induces similar changes in the surface free metal concentration and in the sample solution and ii) when the system is more buffered., This work was financially supported by the Spanish Ministry of Education and Science (Projects CTQ2009-07831, CTM2009-14612 and CTM2012-39183), from the “Comissionat per a Universitats i Recerca del Departament d'Innovació, Universitats i Empresa de la Generalitat de Catalunya”.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Building bridges: an integrated strategy for sustainable food production throughout the value chain

  • Albajes Garcia, Ramon
  • Cantero-Martínez, Carlos
  • Capell Capell, Teresa
  • Christou, Paul
  • Farré Martinez, Alba
  • Galceran i Nogués, Josep
  • López Gatius, Fernando
  • Marín Sillué, Sònia
  • Martín Belloso, Olga
  • Motilva Casado, Mª José
  • Nogareda, Carmina
  • Pemán García, Jesús
  • Puy Llorens, Jaume
  • Recasens i Guinjuan, Jordi
  • Romagosa Clariana, Ignacio
  • Romero Fabregat, Mª Paz
  • Sanchís Almenar, Vicente
  • Savin, Roxana
  • Slafer, Gustavo A.
  • Soliva-Fortuny, Robert
  • Viñas Almenar, Inmaculada
  • Voltas Velasco, Jordi
The food production and processing value chain is under pressure from all sides-increasing demand driven by a growing and more affluent population; dwindling resources caused by urbanization, land erosion, pollution and competing agriculture such as biofuels; and increasing constraints on production methods driven by consumers and regulators demanding higher quality, reduced chemical use, and most of all environmentally beneficial practices 'from farm to fork'. This pressure can only be addressed by developing efficient and sustainable agricultural practices that are harmonized throughout the value chain, so that renewable resources can be exploited without damaging the environment. Bridges must, therefore, be built between the diverse areas within the food production and processing value chain, including bridges between different stages of production, between currently unlinked agronomic practices, and between the different levels and areas of research to achieve joined-up thinking within the industry, so that the wider impact of different technologies, practices and materials on productivity and sustainability is understood at the local, regional, national and global scales. In this article, we consider the challenges at different stages and levels of the value chain and how new technologies and strategies could be used to build bridges and achieve more sustainable food/feed production in the future., Research at the University of Lleida is supported by MINECO, Spain (AGL2009-11006; AGL2009-11475; AGL2009-11964; AGL2009-13517-C03-02; AGL2010-21572; AGL-22050-C03-01; AGL2010-22084-CO2-O1; AGL2010-22182; AGL2011-23996; AGL2011-24862; AGL2011-30529-C02-02; AGL2012-35300; AGL2012-40144-C03-03; BIO2011-22525; BIO2011-23324; BIO2007-61413; CTQ2009-07831; CTM2009-14612 and PIM2010PKB-00746); EU FP7 Integrated Project 222716 SmartCell; EU FP7 European Research Council IDEAS Advanced Grant (to PC) Program-BIOFORCE; EU FP7 Large-scale integrated project KBBE 222738 Selection and improving of fit-for-purpose sampling procedures for specific foods and risks (BASELINE); EU FP7 Program-SICA project KBBE 222690; COST Action FA0804: Molecular farming: plants as a production platform for high value proteins; COST Action FA 1006: Plant Engine; COST Action TD1104: Development of electroporation-based technologies; Centre CONSOLIDER on Agrigenomics funded by MICINN, Spain; the HENUFOOD project (CEN-20101016) as part of the CENIT program and the INCOMES project as part of the INNPRONTA 2011.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Building bridges: an integrated strategy for sustainable food production throughout the value chain

  • Albajes Garcia, Ramon
  • Cantero-Martínez, Carlos
  • Capell Capell, Teresa
  • Christou, Paul
  • Farré Martinez, Alba
  • Galceran i Nogués, Josep
  • López Gatius, Fernando
  • Marín Sillué, Sònia
  • Martín Belloso, Olga
  • Motilva Casado, Mª José
  • Nogareda, Carmina
  • Pemán García, Jesús
  • Puy Llorens, Jaume
  • Recasens i Guinjuan, Jordi
  • Romagosa Clariana, Ignacio
  • Romero Fabregat, Mª Paz
  • Sanchís Almenar, Vicente
  • Savin, Roxana
  • Slafer, Gustavo A.
  • Soliva-Fortuny, Robert
  • Viñas Almenar, Inmaculada
  • Voltas Velasco, Jordi
The food production and processing value chain is under pressure from all sides-increasing demand driven by a growing and more affluent population; dwindling resources caused by urbanization, land erosion, pollution and competing agriculture such as biofuels; and increasing constraints on production methods driven by consumers and regulators demanding higher quality, reduced chemical use, and most of all environmentally beneficial practices 'from farm to fork'. This pressure can only be addressed by developing efficient and sustainable agricultural practices that are harmonized throughout the value chain, so that renewable resources can be exploited without damaging the environment. Bridges must, therefore, be built between the diverse areas within the food production and processing value chain, including bridges between different stages of production, between currently unlinked agronomic practices, and between the different levels and areas of research to achieve joined-up thinking within the industry, so that the wider impact of different technologies, practices and materials on productivity and sustainability is understood at the local, regional, national and global scales. In this article, we consider the challenges at different stages and levels of the value chain and how new technologies and strategies could be used to build bridges and achieve more sustainable food/feed production in the future., Research at the University of Lleida is supported by MINECO, Spain (AGL2009-11006; AGL2009-11475; AGL2009-11964; AGL2009-13517-C03-02; AGL2010-21572; AGL-22050-C03-01; AGL2010-22084-CO2-O1; AGL2010-22182; AGL2011-23996; AGL2011-24862; AGL2011-30529-C02-02; AGL2012-35300; AGL2012-40144-C03-03; BIO2011-22525; BIO2011-23324; BIO2007-61413; CTQ2009-07831; CTM2009-14612 and PIM2010PKB-00746); EU FP7 Integrated Project 222716 SmartCell; EU FP7 European Research Council IDEAS Advanced Grant (to PC) Program-BIOFORCE; EU FP7 Large-scale integrated project KBBE 222738 Selection and improving of fit-for-purpose sampling procedures for specific foods and risks (BASELINE); EU FP7 Program-SICA project KBBE 222690; COST Action FA0804: Molecular farming: plants as a production platform for high value proteins; COST Action FA 1006: Plant Engine; COST Action TD1104: Development of electroporation-based technologies; Centre CONSOLIDER on Agrigenomics funded by MICINN, Spain; the HENUFOOD project (CEN-20101016) as part of the CENIT program and the INCOMES project as part of the INNPRONTA 2011.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Non-purged voltammetry explored with AGNES

  • Aguilar, David
  • Galceran i Nogués, Josep
  • Companys Ferran, Encarnació
  • Puy Llorens, Jaume
  • Parat, C.
  • Authier, L.
  • Potin-Gautier, M.
The reduction of oxygen increases pH in the surroundings of an electrode. A theoretical model estimates the steady-state pH profile from the surface of the electrode up to the bulk solution. A very simple formula predicts that, in non-deareated solutions, for bulk pH-values between 4.0 and 10.0, the corresponding surface pH could be as high as 10.3, regardless of the thickness of the diffusion layer and composition of the sample (except if it has a buffering capacity). For bulk pH lower than 3.0 or higher than 10, pH increases are negligible. Less steep pH-profiles are obtained with buffers (such as MOPS 0.01 M or MES 0.01 M). The change in surface pH modifies the local speciation and hinders the standard interpretation of voltammetric responses. The electroanalytical technique Absence of Gradients and Nernstian Equilibrium Stripping (AGNES), implemented with Screen Printed Electrodes (SPE), provides experimental insights into this phenomenon. AGNES probes the free metal concentration at the electrode surface, from which the surface pH can be estimated for systems of known composition. These estimations agree with the theoretical model for the assayed systems. Additionally, the quantification of the bulk free Zn2+ and Cd2+ concentrations with specific modifications of AGNES for non-purged synthetic solutions is discussed. In general, more accurate determinations of the bulk free metal concentrations in non-purged solutions are expected: i) when the calibration is performed in a medium where the pH increase induces similar changes in the surface free metal concentration and in the sample solution and ii) when the system is more buffered., This work was financially supported by the Spanish Ministry of Education and Science (Projects CTQ2009-07831, CTM2009-14612 and CTM2012-39183), from the “Comissionat per a Universitats i Recerca del Departament d'Innovació, Universitats i Empresa de la Generalitat de Catalunya”.