Pasar al contenido principal

ROBOT SUBMARINO PARA EXPLORACION OMNIDIRECCIONAL Y TELEPRESENCIA

CTM2013-46718-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT DE GIRONA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Towards Omnidirectional Immersion for ROV Teleoperation

  • Bosch, Josep
  • Ridao Rodriguez, Pere
  • García, Rafael
  • Gracias, Nuno
[Abstract] The use of omnidirectional cameras underwater is enabling many new and exciting applications in multiple fields. Among them, it will allow Remotely Operated Underwater Vehicles (ROVs) to be piloted directly by means of the images captured by omnidirectional cameras through virtual reality (VR) headsets. This immersive experience will extend the pilot’s spatial awareness and reduce the usual orientation problems during missions. This paper presents this concept and illustrates it with the first experiments for achieving this purpose., This research was supported by the Spanish National Projects ARCHROV (Marine ARChaeology through HROV/AUV cooperation) under the agreement DPI2014-57746-C3-3-R and OMNIUS under the agreement CTM2013-46718-R, the Generalitat de Catalunya through the ACCIO/TecnioSpring program (TECSPR14-1-0050) (to N. Gracias), and "la Secretaria d'Universitats i Recerca del Departament d'Economia i Coneixement de la Generalitat de Catalunya" (to J. Bosch), Generalitat de Catalunya; TECSPR14-1-0050, https://doi.org/10.17979/spudc.9788497498081
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Omnidirectional Underwater Camera Design and Calibration

  • Bosch Alay, Josep
  • Grácias, Nuno Ricardo Estrela
  • Ridao Rodríguez, Pere
  • Ribas Romagós, David
This paper presents the development of an underwater omnidirectional multi-camera system (OMS) based on a commercially available six-camera system, originally designed for land applications. A full calibration method is presented for the estimation of both the intrinsic and extrinsic parameters, which is able to cope with wide-angle lenses and non-overlapping cameras simultaneously. This method is valid for any OMS in both land or water applications. For underwater use, a customized housing is required, which often leads to strong image distortion due to refraction among the different media. This phenomena makes the basic pinhole camera model invalid for underwater cameras, especially when using wide-angle lenses, and requires the explicit modeling of the individual optical rays. To address this problem, a ray tracing approach has been adopted to create a field-of-view (FOV) simulator for underwater cameras. The simulator allows for the testing of different housing geometries and optics for the cameras to ensure a complete hemisphere coverage in underwater operation. This paper describes the design and testing of a compact custom housing for a commercial off-the-shelf OMS camera (Ladybug 3) and presents the first results of its use. A proposed three-stage calibration process allows for the estimation of all of the relevant camera parameters. Experimental results are presented, which illustrate the performance of the calibration method and validate the approach, This research was sponsored by the MORPH EU FP7-Project under Grant Agreement FP7-ICT-2011-7-288704, the Spanish National Project OMNIUS (Lightweight robot for OMNidirectional Underwater Surveying and telepresence) under Agreement CTM2013-46718-R, the Generalitat de Catalunya through the ACCIO (Agencia per a la competitivitat de l'empresa de la Generalitat de Catalunya)/TecnioSpring program (TECSPR14-1-0050), with the support of "la Secretaria d'Universitats i Recerca del Departament d'Economia i Coneixement de la Generalitat de Catalunya" and the University of Girona under a grant for the formation of researchers
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A surface reconstruction method for in-detail underwater 3D optical mapping

  • Campos Dausà, Ricard
  • García Campos, Rafael
  • Alliez, Pierre
  • Yvinec, Mariette
Underwater range scanning techniques are starting to gain interest in underwater exploration, providing new tools to represent the seafloor. These scans (often) acquired by underwater robots usually result in an unstructured point cloud, but given the common downward-looking or forward-looking configuration of these sensors with respect to the scene, the problem of recovering a piecewise linear approximation representing the scene is normally solved by approximating these 3D points using a heightmap (2.5D). Nevertheless, this representation is not able to correctly represent complex structures, especially those presenting arbitrary concavities normally exhibited in underwater objects. We present a method devoted to full 3D surface reconstruction that does not assume any specific sensor configuration. The method presented is robust to common defects in raw scanned data such as outliers and noise often present in extreme environments such as underwater, both for sonar and optical surveys. Moreover, the proposed method does not need a manual preprocessing step. It is also generic as it does not need any information other than the points themselves to work. This property leads to its wide application to any kind of range scanning technologies and we demonstrate its versatility by using it on synthetic data, controlled laser scans, and multibeam sonar surveys. Finally, and given the unbeatable level of detail that optical methods can provide, we analyze the application of this method on optical datasets related to biology, geology and archeology, This work was partially funded through MINECO (grant number CTM2013-46718-R), the European Commission's Seventh Framework Programme as part of the project Morph (grant number FP7-ICT-2011-7-288704) and project Eurofleets2 (grant number FP7-INF-2012-312762), and the European Research Council (ERC Starting Grant "Robust Geometry Processing"; grant number 257474)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hydrothermal activity along the slow-spreading Lucky Strike ridge segment (Mid-Atlantic Ridge): Distribution, heatflux, and geological controls

  • Escartín, Javier
  • Barreyre, Thibaut
  • Cannat, Mathilde
  • García Campos, Rafael
  • Grácias, Nuno Ricardo Estrela
  • Deschamps, A.
  • Salocchi, A.
  • Sarradin, P.M.
  • Ballu, Valerie
We have reviewed available visual information from the seafloor, and recently acquired microbathymetry for several traverses across the Lucky Strike segment, to evaluate the distribution of hydrothermal activity. We have identified a new on-axis site with diffuse flow, Ewan, and an active vent structure ~1.2 km from the axis, Capelinhos. These sites are minor relative to the Main field, and our total heatflux estimate for all active sites (200-1200 MW) is only slightly higher than previously published estimates. We also identify fossil sites W of the main Lucky Strike field. A circular feature ~200 m in diameter located on the flanks of a rifted off-axis central volcano is likely a large and inactive hydrothermal edifice, named Grunnus. We find no indicator of focused hydrothermal activity elsewhere along the segment, suggesting that the enhanced melt supply and the associated melt lenses, required to form central volcanoes, also sustain hydrothermal circulation to form and maintain large and long-lived hydrothermal fields. Hydrothermal discharge to the seafloor occurs along fault traces, suggesting focusing of hydrothermal circulation in the shallow crust along permeable fault zones, This work has been partly financed by ANR (France) project NT05-3 42213 to JE, by EU FP6-RTN project #505026 MOMAR-NET to MC, and by MINECO (Spain) project CTM2013-46718-R to RG. The French Ministry of Research financed ship, ROV and AUV time through the cruises Graviluck (2006), MOMAR08 (2008), Bathyluck (2009), MOMARSAT (2010–2015). TowCamdeployment during Graviluck cruise was supported by NSF grant OCE-0623744 to A. Soule and D.J. Fornari (WHOI, USA). This is IPGP contribution #3676
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Online underwater optical mapping for trajectories with gaps

  • Elibol, Armagan
  • Shim, Hyunjung
  • Hong, Seonghun
  • Kim, Jinwhan
  • Grácias, Nuno Ricardo Estrela
  • García Campos, Rafael
This paper proposes a vision-only online mosaicing method for underwater surveys. Our method tackles a common problem in low-cost imaging platforms, where complementary navigation sensors produce imprecise or even missing measurements. Under these circumstances, the success of the optical mapping depends on the continuity of the acquired video stream. However, this continuity cannot be always guaranteed due to the motion blurs or lack of texture, common in underwater scenarios. Such temporal gaps hinder the extraction of reliable motion estimates from visual odometry, and compromise the ability to infer the presence of loops for producing an adequate optical map. Unlike traditional underwater mosaicing methods, our proposal can handle camera trajectories with gaps between time-consecutive images. This is achieved by constructing minimum spanning tree which verifies whether the current topology is connected or not. To do so, we embed a trajectory estimate correction step based on graph theory algorithms. The proposed method was tested with several different underwater image sequences and results were presented to illustrate the performance, This research was supported by the MSIP (Ministry of Science, ICT and Future Planning), Korea, under the IT Consilience Creative Program (IITP-2015-R0346-15-1008) supervised by the NIPA (National IT Industry Promotion Agency), the Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (2013062644) and was a part of the project titled ‘Development of an autonomous ship-hull inspection system’ funded by the Ministry of Oceans and Fisheries, Korea. It was also partially funded through MINECO (grant numberCTM2013-46718-R), the European Commission’s Seventh Framework Programme as part of the project Eurofleets2 (grant number FP7-INF-2012-312762), and Generalitat de Catalunya through the ACCIO/TecnioSpring program (TECSPR14-1-0050)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Close-range tracking of underwater vehicles using light beacons

  • Bosch Alay, Josep
  • Grácias, Nuno Ricardo Estrela
  • Ridao Rodríguez, Pere
  • Istenič, Klemen
  • Ribas Romagós, David
This paper presents a new tracking system for autonomous underwater vehicles (AUVs) navigating in a close formation, based on computer vision and the use of active light markers. While acoustic localization can be very effective from medium to long distances, it is not so advantageous in short distances when the safety of the vehicles requires higher accuracy and update rates. The proposed system allows the estimation of the pose of a target vehicle at short ranges, with high accuracy and execution speed. To extend the field of view, an omnidirectional camera is used. This camera provides a full coverage of the lower hemisphere and enables the concurrent tracking of multiple vehicles in different positions. The system was evaluated in real sea conditions by tracking vehicles in mapping missions, where it demonstrated robust operation during extended periods of time, This research was sponsored by the MORPH EU FP7-Project under Grant Agreement FP7-ICT-2011-7-288704, the Spanish National Project OMNIUS (Lightweight robot for omnidirectional underwater surveying and telepresence) under Agreement CTM2013-46718-R, the ROBOCADEMY (European Academy for Marine and Underwater Robotics) EU FP7-Project under Grant Agreement 608096, the Generalitat de Catalunya through the ACCIO (Agència per a la competitivitat de l’empresa de la Generalitat de Catalunya)/TecnioSpring program (TECSPR14-1-0050), with the support of “la Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya”
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Underwater multi-vehicle trajectory alignment and mapping using acoustic and optical constraints

  • Campos Dausà, Ricard
  • Grácias, Nuno Ricardo Estrela
  • Ridao Rodríguez, Pere
Multi-robot formations are an important advance in recent robotic developments, as they allow a group of robots to merge their capacities and perform surveys in a more convenient way. With the aim of keeping the costs and acoustic communications to a minimum, cooperative navigation of multiple underwater vehicles is usually performed at the control level. In order to maintain the desired formation, individual robots just react to simple control directives extracted from range measurements or ultra-short baseline (USBL) systems. Thus, the robots are unaware of their global positioning, which presents a problem for the further processing of the collected data. The aim of this paper is two-fold. First, we present a global alignment method to correct the dead reckoning trajectories of multiple vehicles to resemble the paths followed during the mission using the acoustic messages passed between vehicles. Second, we focus on the optical mapping application of these types of formations and extend the optimization framework to allow for multi-vehicle geo-referenced optical 3D mapping using monocular cameras. The inclusion of optical constraints is not performed using the common bundle adjustment techniques, but in a form improving the computational efficiency of the resulting optimization problem and presenting a generic process to fuse optical reconstructions with navigation data. We show the performance of the proposed method on real datasets collected within the Morph EU-FP7 project, This work was partially funded through MINECO under grant number CTM2013-46718-R, the EU 7th Framework Programme as part of the project Morph under grant number FP7-ICT-2011-7-288704, project Eurofleets2 under grant number FP7-INF-2012-312762, and the Generalitat de Catalunya through the ACCIO/TecnioSpring program TECSPR14-1-0050 (N. Gracias)