Pasar al contenido principal

DESARROLLO, INTERPRETACION Y APLICACION DE TECNICAS EMERGENTES PARA DETERMINAR LA ESPECIACION Y LA DISPONIBILIDAD DE IONES INORGANICOS Y NANOPARTICULAS EN MEDIOS NATURALES

CTM2013-48967-C2-2-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT DE GIRONA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Comparison of different speciation techniques to measure Zn availability in hydroponic media

  • Companys Ferran, Encarnació
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
  • Sedó, Maria
  • Vera, Ruben
  • Anticó, Enriqueta
  • Fontàs, Claudia
Four analytical techniques are compared: AGNES (Absence of Gradients and Nernstian Equilibrium Stripping), LASV (Anodic Stripping Voltammetry with Linear stripping), DGT (Diffusive Gradients in Thin films) and PIM (Polymer Inclusion Membranes). These techniques have been designed to provide the free ion concentration or a labile fraction, complementarily contributing to an integrated description of speciation and availability. Their simultaneous application to the determination of free Zn concentrations or labile fluxes in seven solutions of a hydroponic medium reveals characteristics of each technique and correlations between their results. All dynamic results can be interpreted in terms of a general theoretical framework on fluxes. Indeed, in techniques under diffusion-limited conditions in the sample, the flux can be split into the free contribution (linearly proportional to the free fraction), plus the contribution of the complexes (where mobility, lability and abundance of complexation are intertwined). A methodology to compute lability degrees is developed. Measurements with PIM devices confirm that diffusion in the sample solution is not rate limiting, so its flux is proportional to the free metal in the donor solution. A proportionality between the responses of any given two techniques is observed, which suggests that, for the low ligand-to-metal concentration ratios used in the present work, any of these techniques would correlate similarly with uptake, toxic or nutritional measurements., This work was financially supported by the Spanish Ministry of Education and Science (projects CTM2013-48967 and CTM2016-78798). Alexandra Altier's help with DGT experiments is acknowledged.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Extending the use of Diffusive Gradients in Thin Films (DGT) to solutions where competition, saturation, and kinetic effects are not negligible

  • Jiménez-Piedrahita, Martín
  • Altier Infantes, Alexandra
  • Cecilia Averós, Joan
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
  • Rey-Castro, Carlos
  • Zhang, Hao
  • Davison, William
DGT (Diffusion Gradients in Thin films) was designed to sample trace metals in situ at their natural concentrations. The setup and the experimental deployment conditions were established to allow interpretation of a linear accumulation of metal with time, using a simple expression based on a steady-state flux under perfect sink conditions. However, the extension of DGT to a wide range of analytes and its use under varied conditions has shown that, in some situations, these conditions are not fulfilled, so that accumulations with time are nonlinear. Previously, when such curvature was observed, concentrations in solution could not be reliably calculated. Here, we present fundamentally derived equations that reproduce the time accumulation for three situations: (i) kinetic limitations in the binding to the resin, (ii) saturation or equilibrium effects, or (iii) non-negligible competitive effects. We show how the accumulations can be quantified, in terms of the required kinetic and thermodynamic constants, and provide practical guidance for their use to obtain reliable estimates of solution concentrations. Solutions containing Mg or Mn, where all three situations can prevail, are used as examples. Calculated concentrations show reasonable agreement with the experimentally known values and with the results of a numerical model of the system, significantly improving, the estimations based on perfect sink conditions., Such an approach opens up the possibility of using DGT more widely in challenging systems and allows DGT data to be interpreted more fully., Financial support from FEDER and the Spanish Ministry of Education and Science (Project Nos. CTM2012-39183, CTM2013-48967 and CTM2016-78798) is gratefully acknowl- edged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

System for mercury preconcentration in natural waters based on a polymer inclusion membrane incorporating an ionic liquid

  • Elias, Gemma
  • Díez, Sergi
  • Fontàs, Clàudia
In this study, we have evaluated two different ionic liquids (IL) as extractants based on the same cation (trioctylmethylammonium) but bearing the anion thiosalicylate (TOMATS) or salicylate (TOMAS). Both IL have been incorporated as carriers in polymer inclusion membranes (PIMs), and mercury (Hg) has been preconcentrated using a special device. Results show that among the tested IL, TOMATS has given better results. A PIM made of 50% cellulose triacetate, 30% TOMATS and 20% nitrophenyl octyl ether as a plasticizer enabled the effective transport of Hg to a 10−3M cysteine solution used as a stripping phase. This novel and simple PIM-device system allows the transport of Hg at low concentration levels in different types of natural waters such as rivers, groundwater and seawater without any previous treatment. Since no matrix effect was observed on Hg transport efficiency with different waters, this newly developed PIM-system could be used as a global detection system for this metal. The effect of biofilm growth on the surface of PIMs has been investigated for the first time, and no significant differences on Hg transport have been found when using a fresh PIM and a PIM deployed for 7 days in a pond. © 2019 Elsevier B.V., The financial support of the Ministerio de Economía y Competitividad through projects CTM2013-48967-C2-2-P and CTM2016-78798-C2-2-P (AEI/FEDER/UE) is gratefully acknowledged. Gemma Elias would also like to thank the scholarship IFUdG2016-2018 from University of Girona. C. Martínez and E. Ubasart are also acknowledged for their participation in the laboratory works., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Extending the use of Diffusive Gradients in Thin Films (DGT) to solutions where competition, saturation, and kinetic effects are not negligible

  • Jiménez-Piedrahita, Martín
  • Altier Infantes, Alexandra
  • Cecilia Averós, Joan
  • Puy Llorens, Jaume
  • Galceran i Nogués, Josep
  • Rey-Castro, Carlos
  • Zhang, Hao
  • Davison, William
DGT (Diffusion Gradients in Thin films) was designed to sample trace metals in situ at their natural concentrations. The setup and the experimental deployment conditions were established to allow interpretation of a linear accumulation of metal with time, using a simple expression based on a steady-state flux under perfect sink conditions. However, the extension of DGT to a wide range of analytes and its use under varied conditions has shown that, in some situations, these conditions are not fulfilled, so that accumulations with time are nonlinear. Previously, when such curvature was observed, concentrations in solution could not be reliably calculated. Here, we present fundamentally derived equations that reproduce the time accumulation for three situations: (i) kinetic limitations in the binding to the resin, (ii) saturation or equilibrium effects, or (iii) non-negligible competitive effects. We show how the accumulations can be quantified, in terms of the required kinetic and thermodynamic constants, and provide practical guidance for their use to obtain reliable estimates of solution concentrations. Solutions containing Mg or Mn, where all three situations can prevail, are used as examples. Calculated concentrations show reasonable agreement with the experimentally known values and with the results of a numerical model of the system, significantly improving, the estimations based on perfect sink conditions., Such an approach opens up the possibility of using DGT more widely in challenging systems and allows DGT data to be interpreted more fully., Financial support from FEDER and the Spanish Ministry of Education and Science (Project Nos. CTM2012-39183, CTM2013-48967 and CTM2016-78798) is gratefully acknowl- edged
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Comparison of different speciation techniques to measure Zn availability in hydroponic media

  • Companys Ferran, Encarnació
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
  • Sedó, Maria
  • Vera Chamorro, Ruben
  • Anticó i Daró, Ma. Enriqueta
  • Fontàs Rigau, Clàudia
Four analytical techniques are compared: AGNES (Absence of Gradients and Nernstian Equilibrium Stripping), LASV (Anodic Stripping Voltammetry with Linear stripping), DGT (Diffusive Gradients in Thin films) and PIM (Polymer Inclusion Membranes). These techniques have been designed to provide the free ion concentration or a labile fraction, complementarily contributing to an integrated description of speciation and availability. Their simultaneous application to the determination of free Zn concentrations or labile fluxes in seven solutions of a hydroponic medium reveals characteristics of each technique and correlations between their results. All dynamic results can be interpreted in terms of a general theoretical framework on fluxes. Indeed, in techniques under diffusion-limited conditions in the sample, the flux can be split into the free contribution (linearly proportional to the free fraction), plus the contribution of the complexes (where mobility, lability and abundance of complexation are intertwined). A methodology to compute lability degrees is developed. Measurements with PIM devices confirm that diffusion in the sample solution is not rate limiting, so its flux is proportional to the free metal in the donor solution. A proportionality between the responses of any given two techniques is observed, which suggests that, for the low ligand-to-metal concentration ratios used in the present work, any of these techniques would correlate similarly with uptake, toxic or nutritional measurements, This work was financially supported by the Spanish Ministry of Education and Science (projects CTM2013-48967 and CTM2016-78798). Alexandra Altier’s help with DGT experiments is acknowledged.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

First Report on a Solvent-Free Preparation of Polymer Inclusion Membranes with an Ionic Liquid

  • Vera Chamorro, Ruben
  • Anticó i Daró, Ma. Enriqueta
  • Eguiazábal, José Ignacio
  • Aranburu, Nora
  • Fontàs Rigau, Clàudia
A novel and environmentally-friendly procedure for the preparation of polymer inclusion membranes (PIMs) containing an ionic liquid is presented for the first time. Traditionally, PIMs are prepared by a solvent casting method with the use of harmful organic solvents. Here we report a new solvent-free procedure based on a thermal-compression technique which involve the melting of the components of the PIM and the application of a high pressure to the melted specimen to form a flat-sheet film. In our study, we have tested different polymers, such as two cellulose derivatives as well as two thermoplastic polymers, polyurethane (TPU) and poli ε-caprolactone (PCL). The ionic liquid (IL) trioctylmethylammonium chloride (Aliquat 336) has been used to produce PIMs with a fixed composition of 70% polymer–30% IL (w/w). Both TPU and PCL polymers provide successful membranes, which have been thoroughly characterized. PIMs based on the polymer PCL showed a high stability. To test whether the properties of the IL were affected by the preparation conditions, the extraction ability of Aliquat 336 was investigated for both PCL and TPU membranes in terms of Cr(VI) extraction. Satisfactory values (90% extraction) were obtained for both membranes tested, showing this novel procedure as a green alternative for the preparation of PIMs with ILs, This research was funded by the Spanish government through research projects CTM2013-48967-C2-2-P and CTM2016-78798-C2-2-P (AEI/FEDER/UE)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of a polymer inclusion membrane (PIM) for the preconcentration of antibiotics in environmental water samples

  • Garcia-Rodríguez, Aida
  • Matamoros, Víctor
  • Kolev, Spas D.
  • Fontàs Rigau, Clàudia
Antibiotics belong to the so called group of emerging organic contaminants (EOCs) and their presence in natural waters is of considerable environmental concern. Due to the need of their determination in natural waters at trace levels, we have developed a polymer inclusion membrane (PIM) capable of transporting six frequently used antibiotics (four sulfonamides, SAs, and two tetracyclines, TCs). Cellulose triacetate (CTA) and polyvinyl chloride (PVC) based membranes have been tested in transport experiments, with the former membranes exhibiting better permeability for the antibiotics studied. The addition of a plasticizer further improved the permeability of the CTA-based membranes. A PIM containing 30 wt% ETA, 26 wt% Aliquat 336, and 44 wt% 2-nitrophenyloctyl ether, provided the highest percentage of transport over a 24 h period, varying from 75% (sulfathiazole, STZ) to 100% (tetracycline, TC and oxytetracycline, OTC), except for sulfapyridine, (SPY) (55%). The feed solution in these transport experiments was at pH 9 while the stripping solution contained 1.0 M NaCl. A PIM-based device was constructed for the preconcentration of the antibiotics studied in its stripping solution and it was successfully applied to the preconcentration of these antibiotics in environmental water samples, The financial support of the Ministerio de Economia y Competitividad through project CTM2013-48967-C2-2-P is gratefully acknowledged. Aida Garcia-Rodriguez would like to thank the University of Girona for a research fellowship (BR2011/27)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Development of a polymer inclusion membrane-based passive sampler for monitoring of sulfamethoxazole in natural waters. Minimizing the effect of the flow pattern of the aquatic system

  • Garcia-Rodríguez, Aida
  • Fontàs Rigau, Clàudia
  • Matamoros, Víctor
  • Almeida, M. Inês G. S.
  • Cattrall, Robert W.
  • Kolev, Spas D.
Antibiotics are commonly used pharmaceuticals for both human and veterinary purposes. Wastewater treatment plants (WWTPs) are not designed to completely remove these compounds from their influents. Thus, some antibiotics are being continuously discharged in the environment and subsequently found in diverse natural waters. Sulfamethoxazole (SMX) is one of the most frequently detected antibiotics in WWTP effluents and environmental waters. It exerts harmful effects on living organisms and therefore, there is a need to monitor its presence in aquatic systems. This study focused on the development of a passive sampler incorporating a polymer inclusion membrane (PIM) with Aliquat 336 as the extracting agent/membrane carrier for the monitoring of SMX in aquatic systems. Different PIM compositions were tested and the PIM composed of 30wt.% cellulose triacetate (CTA), 26wt.% Aliquat 336 and 44wt.% of the plasticizer 2-nitrophenyl octyl ether (NPOE) provided the best SMX permeation from natural waters to a 2molL-1 NaCl receiving solution. It was demonstrated that the flow pattern of the source solution influenced significantly the performance of a sampler with traditional design. The flow pattern of aquatic systems cannot be controlled and this potentially endangers the reliability of passive sampling data collected in these systems. A passive sampler with a new design is proposed which has been found to minimize the influence of the flow pattern of the aquatic medium being monitored, The financial support of the Ministerio de Economía y Competitividad through project CTM2013-48967-C2-2-P is also gratefully acknowledged
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tuning physicochemical, electrochemical and transport characteristics of polymer inclusion membrane by varying the counter-anion of the ionic liquid Aliquat 336

  • Vera Chamorro, Ruben
  • Gelde, L.
  • Anticó i Daró, Ma. Enriqueta
  • Martínez de Yuso, M.V.
  • Benavente, Juana
  • Fontàs Rigau, Clàudia
Polymer inclusion membranes (PIMs) have been prepared using cellulose triacetate (CTA) as polymer and derivatives of the commercial ionic liquid (IL) Aliquat 336, trioctyl methylammonium chloride (AlqCl), as extractants. The different ILs were prepared by exchanging chloride anion from AlqCl for other more lipophilic anions, obtaining IL derivatives AlqNO 3 and AlqSCN. PIMs containing these extractants at two different concentrations (30% and 60%) were prepared and characterized using X-ray photoelectron spectroscopy (XPS), infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), contact angle and impedance spectroscopy to obtain information on the material properties of both the surface and bulk membranes. The IL counter-anion affects the membrane's electrical parameters (dielectric constant and conductivity) as well as its hydrophobic character, which also depends on the IL concentration in the PIM formulation. Passive transport across the different PIMs using HCl and NaCl aqueous solutions was also considered, and the results obtained seem to be directly related to the hydrophilic/hydrophobic character of the studied membranes, The financial support of the Spanish government through research project CTM2013-48967-C2-2-P is acknowledged. R. Vera acknowledges a grant from the Spanish Ministerio de Economía y Competitividad (ref. BES-2014-068314)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

System for mercury preconcentration in natural waters based on a polymer inclusion membrane incorporating an ionic liquid

  • Elias Estañol, Gemma
  • Díez Salvador, Sergi
  • Fontàs Rigau, Clàudia
In this study, we have evaluated two different ionic liquids (IL) as extractants based on the same cation (trioctylmethylammonium) but bearing the anion thiosalicylate (TOMATS) or salicylate (TOMAS). Both IL have been incorporated as carriers in polymer inclusion membranes (PIMs), and mercury (Hg) has been preconcentrated using a special device. Results show that among the tested IL, TOMATS has given better results. A PIM made of 50% cellulose triacetate, 30% TOMATS and 20% nitrophenyl octyl ether as a plasticizer enabled the effective transport of Hg to a 10−3M cysteine solution used as a stripping phase. This novel and simple PIM-device system allows the transport of Hg at low concentration levels in different types of natural waters such as rivers, groundwater and seawater without any previous treatment. Since no matrix effect was observed on Hg transport efficiency with different waters, this newly developed PIM-system could be used as a global detection system for this metal. The effect of biofilm growth on the surface of PIMs has been investigated for the first time, and no significant differences on Hg transport have been found when using a fresh PIM and a PIM deployed for 7 days in a pond, The financial support of the Ministerio de Economía y Competitividad through projects CTM2013-48967-C2-2-P and CTM2016-78798-C2-2-P (AEI/FEDER/UE) is gratefully acknowledged. Gemma Elias would also like to thank the scholarship IFUdG2016-2018 from University of Girona
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Titanium dioxide solid phase for inorganic species adsorption and determination: the case of arsenic

  • Vera Chamorro, Ruben
  • Fontàs Rigau, Clàudia
  • Anticó i Daró, Ma. Enriqueta
We have evaluated a new titanium dioxide (Adsorbsia As600) for the adsorption of both inorganic As (V) and As (III) species. In order to characterize the sorbent, batch experiments were undertaken to determine the capacities of As (III) and As (V) at pH 7.3, which were found to be 0.21 and 0.14 mmol g−1, respectively. Elution of adsorbed species was only possible using basic solutions, and arsenic desorbed under batch conditions was 50 % when 60 mg of loaded titanium dioxide was treated with 0.5 M NaOH solution. Moreover, its use as a sorbent for solid-phase extraction and preconcentration of arsenic species from well waters has been investigated, without any previous pretreatment of the sample. Solid-phase extraction was implemented by packing several minicolumns with Adsorbsia As600. The method has been validated showing good accuracy and precision. Acceptable recoveries were obtained when spiked waters at 100–200 μg L−1 were measured. The presence of major anions commonly found in waters did not affect arsenic adsoption, and only silicate at 100 mg L−1 level severely competed with arsenic species to bind to the material. Finally, the measured concentrations in water samples containing arsenic from the Pyrinees (Catalonia, Spain) showed good agreement with the ICP-MS results, The financial support of the Spanish government through research project CTM2013-48967-C2-2-P is acknowledged. R. Vera acknowledges a grant from Spanish Ministerio de Economía y Competitividad ref. B ES-2014-068314
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Comparison of different speciation techniques to measure Zn availability in hydroponic media

  • Companys Ferran, Encarnació
  • Galceran i Nogués, Josep
  • Puy Llorens, Jaume
  • Sedó, Maria
  • Vera, Ruben
  • Anticó, Enriqueta
  • Fontàs, Claudia
Four analytical techniques are compared: AGNES (Absence of Gradients and Nernstian Equilibrium Stripping), LASV (Anodic Stripping Voltammetry with Linear stripping), DGT (Diffusive Gradients in Thin films) and PIM (Polymer Inclusion Membranes). These techniques have been designed to provide the free ion concentration or a labile fraction, complementarily contributing to an integrated description of speciation and availability. Their simultaneous application to the determination of free Zn concentrations or labile fluxes in seven solutions of a hydroponic medium reveals characteristics of each technique and correlations between their results. All dynamic results can be interpreted in terms of a general theoretical framework on fluxes. Indeed, in techniques under diffusion-limited conditions in the sample, the flux can be split into the free contribution (linearly proportional to the free fraction), plus the contribution of the complexes (where mobility, lability and abundance of complexation are intertwined). A methodology to compute lability degrees is developed. Measurements with PIM devices confirm that diffusion in the sample solution is not rate limiting, so its flux is proportional to the free metal in the donor solution. A proportionality between the responses of any given two techniques is observed, which suggests that, for the low ligand-to-metal concentration ratios used in the present work, any of these techniques would correlate similarly with uptake, toxic or nutritional measurements., This work was financially supported by the Spanish Ministry of Education and Science (projects CTM2013-48967 and CTM2016-78798). Alexandra Altier's help with DGT experiments is acknowledged.