Pasar al contenido principal

INTEGRACION DE NUEVAS METODOLOGIAS PARA LA PLANIFICACION Y ANALISIS MEDIOAMBIENTAL DE YACIMIENTOS PETROLIFEROS

CTM2014-55014-C3-3-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High-order mesh curving by distortion minimization with boundary nodes free to slide on a 3D CAD representation

  • Ruiz-Gironés, Eloi
  • Roca Navarro, Francisco Javier
  • Sarrate Ramos, Josep|||0000-0003-0182-934X
We propose a 3D mesh curving method that converts a straight-sided mesh to an optimal-quality curved high-order mesh that interpolates a CAD boundary representation. The main application of this method is the generation of discrete approximations of curved domains that are valid for simulation analysis with unstructured high-order methods. We devise the method as follows. First, the boundary of a straight-sided high-order mesh is curved to match the curves and surfaces of a CAD model. Second, the method minimizes the volume mesh distortion with respect to the coordinates of the inner nodes and the parametric coordinates of the curve and surface nodes. The proposed minimization features untangling capabilities and therefore, it repairs the invalid elements that may arise from the initial curving step. Compared with other mesh curving methods, the only goal of the proposed residual system is to minimize the volume mesh distortion. Furthermore, it is less constrained since the boundary nodes are free to slide on the CAD curves and surfaces. Hence, the proposed method is well suited to generate curved high-order meshes of optimal quality from CAD models that contain thin parts or high-curvature entities. To illustrate these capabilities, we generate several curved high-order meshes from CAD models with the implementation detailed in this work. Specifically, we detail a node-by-node non-linear iterative solver that minimizes the proposed objective function in a block Gauss-Seidel manner., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High-order hybridizable discontinuous Galerkin formulation for one-phase flow through porous media

  • Costa Solé, Albert
  • Ruiz Gironès, Eloi
  • Sarrate Ramos, Josep|||0000-0003-0182-934X
We present a stable high-order hybridizable discontinuous Galerkin (HDG) formulation coupled with high-order diagonal implicit Runge–Kuta (DIRK) schemes to simulate slightly compressible one-phase flow through porous media. The HDG stability depends on the selection of a single parameter and its definition is crucial to ensure the stability and to achieve the high-order properties of the method. Thus, we extend the work of Nguyen et al. in J Comput Phys 228, 8841–8855, 2009 to deduce an analytical expression for the stabilization parameter using the material parameters of the problem and the Engquist-Osher monotone flux scheme. The formulation is high-order accurate for the pressure, the flux and the velocity with the same convergence rate of P+1, being P the polynomial degree of the approximation. This is important because high-order methods have the potential to reduce the computational cost while obtaining more accurate solutions with less dissipation and dispersion errors than low order methods. The formulation can use unstructured meshes to capture the heterogeneous properties of the reservoir. In addition, it is conservative at the element level, which is important when solving PDE’s in conservative form. Moreover, a hybridization procedure can be applied to reduce the size of the global linear system. To keep these advantages, we use DIRK schemes to perform the time integration. DIRK schemes are high-order accurate and have a low memory footprint. We show numerical evidence of the optimal convergence rates obtained with the proposed formulation. Finally, we present several examples to illustrate the capabilities of the formulation., This work has been supported by FEDER and the Spanish Government, Ministerio de Ciencia Innovación y Universidades grant project contract PGC2018-097257-B-C33 and Ministerio de Economía y Competitividad under grant BES-2015-072833., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High-order mesh curving by distortion minimization with boundary nodes free to slide on a 3D CAD representation

  • Ruiz-Gironés, Eloi
  • Roca, Xevi
  • Sarrate, Jose
We propose a 3D mesh curving method that converts a straight-sided mesh to an optimal-quality curved high-order mesh that interpolates a CAD boundary representation. The main application of this method is the generation of discrete approximations of curved domains that are valid for simulation analysis with unstructured high-order methods. We devise the method as follows. First, the boundary of a straight-sided high-order mesh is curved to match the curves and surfaces of a CAD model. Second, the method minimizes the volume mesh distortion with respect to the coordinates of the inner nodes and the parametric coordinates of the curve and surface nodes. The proposed minimization features untangling capabilities and therefore, it repairs the invalid elements that may arise from the initial curving step. Compared with other mesh curving methods, the only goal of the proposed residual system is to minimize the volume mesh distortion. Furthermore, it is less constrained since the boundary nodes are free to slide on the CAD curves and surfaces. Hence, the proposed method is well suited to generate curved high-order meshes of optimal quality from CAD models that contain thin parts or high-curvature entities. To illustrate these capabilities, we generate several curved high-order meshes from CAD models with the implementation detailed in this work. Specifically, we detail a node-by-node non-linear iterative solver that minimizes the proposed objective function in a block Gauss–Seidel manner., This research was partially supported by CONACYT-SENER (‘‘Fondo Sectorial CONACYT SENER HIDROCARBUROS’’, grant contract 163723) and by the Spanish Ministerio de Economía y Competitividad under grant CTM2014-55014-C3-3-R.The work of the second author was partially supported by the Boeing Co. and US Air Force Office of Scientific Research and European Commis- sion through the Boeing–MIT Alliance and Computational Math Program and Marie Skłodowska-Curie Actions (HiPerMeGaFlows project),respectively., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An HDG formulation for incompressible and immiscible two-phase porous media flow problems

  • Costa Solé, Albert
  • Ruiz Gironès, Eloi
  • Sarrate Ramos, Josep|||0000-0003-0182-934X
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International journal of computational fluid dynamics on 27/05/2019, available online at: https://tandfonline.com/doi/abs/10.1080/10618562.2019.1617855, We develop a high-order hybridisable discontinuous Galerkin (HDG) formulation to solve the immiscible and incompressible two-phase flow problem in a heterogeneous porous media. The HDG method is locally conservative, has fewer degrees of freedom than other discontinuous Galerkin methods due to the hybridisation procedure, provides built-in stabilisation for arbitrary polynomial degrees and, if the error of the temporal discretisation is low enough, the pressure, the saturation and their fluxes converge with order P+1 in L2-norm, being P the polynomial degree. In addition, an element-wise post-process can be applied to obtain a convergence rate of P+2 in L2-norm for the scalar variables. All of these advantages make the HDG method suitable for solving multiphase flow trough porous media. We show numerical evidence of the convergences rates. Finally, to assess the capabilities of the proposed formulation, we apply it to several cases of water-flooding technique for oil recovery., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

High-order hybridizable discontinuous Galerkin formulation with fully implicit temporal schemes for the simulation of two-phase flow through porous media

  • Costa Solé, Albert
  • Ruiz Gironès, Eloi
  • Sarrate Ramos, Josep|||0000-0003-0182-934X
We present a memory-efficient high-order hybridizable discontinuous Galerkin (HDG) formulation coupled with high-order fully implicit Runge-Kutta schemes for immiscible and incompressible two-phase flow through porous media. To obtain the same high-order accuracy in space and time, we propose using high-order temporal schemes that allow using large time steps. Therefore, we require unconditionally stable temporal schemes for any combination of element size, polynomial degree and time step. Specifically, we use the Radau IIA and Gauss-Legendre schemes, which are unconditionally stable, achieve high-order accuracy with few stages, and do not suffer order reduction in this problem. To reduce the memory footprint of coupling these spatial and temporal high-order schemes, we rewrite the non-linear system. In this way, we achieve a better sparsity pattern of the Jacobian matrix and less coupling between stages. Furthermore, we propose a fix-point iterative method to further reduce the memory consumption. The saturation solution may present sharp fronts. Thus, the high-order approximation may contain spurious oscillations. To reduce them, we introduce artificial viscosity. We detect the elements with high-oscillations using a computationally efficient shock sensor obtained from the saturation solution and the post-processed saturation of HDG. Finally, we present several examples to assess the capabilities of our formulation., This work has been supported by FEDER and the Spanish Government, Ministerio de Economía y Competitividad grant project contract CTM2014-55014-C3-3-R, Ministerio de Ciencia Innovación y Universidades grant project contract PGC2018-097257-B-C33 and the grant BES-2015-072833., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An augmented Lagrangian formulation to impose boundary conditions for distortion based mesh moving and curving

  • Ruiz-Gironés, Eloi
  • Gargallo-Peiró, Abel
  • Sarrate Ramos, Josep|||0000-0003-0182-934X
  • Roca, Xevi
We formulate a mesh morphing technique as mesh distortion minimization problem constrained to weakly satisfy the imposed displacement of the boundary nodes. The method is devised to penalize the appearance of inverted elements during the optimization process. Accordingly, we have not equipped the method with untangling capabilities. To solve the constrained minimization problem, we apply the augmented Lagrangian technique to incorporate the boundary condition in the objective function using the Lagrangian multipliers and a penalty parameter. We have applied the proposed formulation to mesh moving and mesh curving problems. The results show that the method has the ability to deal with large displacements for 2D and 3D meshes with non-uniform sizing, and mesh curving of highly stretched 2D high-order meshes., This project has received funding from the European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programme under grant agreement No 715546. The work of the corresponding author has been partially supported by the Spanish Ministerio de Economía y Competitividad under the personal grant agreement RYC- 2015-01633. The work of the third author has been supported by the Spanish Ministerio de Economía y Competitividad under grant agreement CTM2014-55014-C3-3-R., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Generation of Curved High-order Meshes with Optimal Quality and Geometric Accuracy

  • Ruiz-Girones, Eloi
  • Sarrate Ramos, Josep|||0000-0003-0182-934X
  • Roca, Xevi
We present a novel methodology to generate curved high-order meshes featuring optimal mesh quality and geometric accuracy. The proposed technique combines a distortion measure and a geometric Full-size image (<1 K)-disparity measure into a single objective function. While the element distortion term takes into account the mesh quality, the Full-size image (<1 K)-disparity term takes into account the geometric error introduced by the mesh approximation to the target geometry. The proposed technique has several advantages. First, we are not restricted to interpolative meshes and therefore, the resulting mesh approximates the target domain in a non-interpolative way, further increasing the geometric accuracy. Second, we are able to generate a series of meshes that converge to the actual geometry with expected rate while obtaining high-quality elements. Third, we show that the proposed technique is robust enough to handle real-case geometries that contain gaps between adjacent entities., This research was partially supported by the Spanish Ministerio de Economía y Competitividad under grand contract CTM2014-55014-C3-3-R, and by the Government of Catalonia under grand contract 2014-SGR-1471. The work of the last author was supported by the European Commission through the Marie Sklodowska-Curie Actions (HiPerMeGaFlows project)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Automatically imposing incremental boundary displacements for valid mesh morphing and curving

  • Ruiz Gironès, Eloi
  • Gargallo Peiró, Abel|||0000-0003-3742-2197
  • Sarrate Ramos, Josep|||0000-0003-0182-934X
  • Roca, Xevi
We present a new incremental mesh morphing method obtained by proposing and discretizing a solution procedure for the continuous morphing problem. Our method seeks a diffeomorphism that transforms an initial domain to a final domain by only prescribing the boundary displacement. To this end, we propose to minimize the distortion of the morphing mapping constrained to satisfy the imposed boundary displacement. To solve this problem, we consider an augmented Lagrangian method in Hilbert spaces that incorporates the boundary condition in the objective function using the Lagrange multipliers and a penalty parameter. The distortion is devised to penalize the appearance of non-invertible mappings and therefore, we do not need to equip our discrete implementation with untangling capabilities. Moreover, we introduce a weight function to improve the quality of the deformation and thus, the robustness of the non-linear solver. The discretization of the continuous augmented Lagrangian method leads to a mesh morphing method suitable for large displacements and rotations of meshes with non-uniform sizing, and mesh curving of highly stretched high-order meshes., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An augmented Lagrangian formulation to impose boundary conditions for distortion based mesh moving and curving

  • Ruiz-Gironés, Eloi
  • Gargallo-Peiró, Abel
  • Sarrate Ramos, Josep
  • Roca, Xevi
We formulate a mesh morphing technique as mesh distortion minimization problem constrained to weakly satisfy the imposed displacement of the boundary nodes. The method is devised to penalize the appearance of inverted elements during the optimization process. Accordingly, we have not equipped the method with untangling capabilities. To solve the constrained minimization problem, we apply the augmented Lagrangian technique to incorporate the boundary condition in the objective function using the Lagrangian multipliers and a penalty parameter. We have applied the proposed formulation to mesh moving and mesh curving problems. The results show that the method has the ability to deal with large displacements for 2D and 3D meshes with non-uniform sizing, and mesh curving of highly stretched 2D high-order meshes., This project has received funding from the European Research Council (ERC) under the European Unions Horizon 2020 research and innovation programme under grant agreement No 715546. The work of the corresponding author has been partially supported by the Spanish Ministerio de Economía y Competitividad under the personal grant agreement RYC- 2015-01633. The work of the third author has been supported by the Spanish Ministerio de Economía y Competitividad under grant agreement CTM2014-55014-C3-3-R., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High-order hybridizable discontinuous Galerkin formulation for one-phase flow through porous media

  • Costa Solé, Albert
  • Ruiz Gironès, Eloi
  • Sarrate Ramos, Josep
We present a stable high-order hybridizable discontinuous Galerkin (HDG) formulation coupled with high-order diagonal implicit Runge–Kuta (DIRK) schemes to simulate slightly compressible one-phase flow through porous media. The HDG stability depends on the selection of a single parameter and its definition is crucial to ensure the stability and to achieve the high-order properties of the method. Thus, we extend the work of Nguyen et al. in J Comput Phys 228, 8841–8855, 2009 to deduce an analytical expression for the stabilization parameter using the material parameters of the problem and the Engquist-Osher monotone flux scheme. The formulation is high-order accurate for the pressure, the flux and the velocity with the same convergence rate of P+1, being P the polynomial degree of the approximation. This is important because high-order methods have the potential to reduce the computational cost while obtaining more accurate solutions with less dissipation and dispersion errors than low order methods. The formulation can use unstructured meshes to capture the heterogeneous properties of the reservoir. In addition, it is conservative at the element level, which is important when solving PDE’s in conservative form. Moreover, a hybridization procedure can be applied to reduce the size of the global linear system. To keep these advantages, we use DIRK schemes to perform the time integration. DIRK schemes are high-order accurate and have a low memory footprint. We show numerical evidence of the optimal convergence rates obtained with the proposed formulation. Finally, we present several examples to illustrate the capabilities of the formulation., This work has been supported by FEDER and the Spanish Government, Ministerio de Ciencia Innovación y Universidades grant project contract PGC2018-097257-B-C33 and Ministerio de Economía y Competitividad under grant BES-2015-072833., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High-order mesh curving by distortion minimization with boundary nodes free to slide on a 3D CAD representation

  • Ruiz-Gironés, Eloi
  • Roca Navarro, Francisco Javier
  • Sarrate Ramos, Josep
We propose a 3D mesh curving method that converts a straight-sided mesh to an optimal-quality curved high-order mesh that interpolates a CAD boundary representation. The main application of this method is the generation of discrete approximations of curved domains that are valid for simulation analysis with unstructured high-order methods. We devise the method as follows. First, the boundary of a straight-sided high-order mesh is curved to match the curves and surfaces of a CAD model. Second, the method minimizes the volume mesh distortion with respect to the coordinates of the inner nodes and the parametric coordinates of the curve and surface nodes. The proposed minimization features untangling capabilities and therefore, it repairs the invalid elements that may arise from the initial curving step. Compared with other mesh curving methods, the only goal of the proposed residual system is to minimize the volume mesh distortion. Furthermore, it is less constrained since the boundary nodes are free to slide on the CAD curves and surfaces. Hence, the proposed method is well suited to generate curved high-order meshes of optimal quality from CAD models that contain thin parts or high-curvature entities. To illustrate these capabilities, we generate several curved high-order meshes from CAD models with the implementation detailed in this work. Specifically, we detail a node-by-node non-linear iterative solver that minimizes the proposed objective function in a block Gauss-Seidel manner., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High-order mesh curving by distortion minimization with boundary nodes free to slide on a 3D CAD representation

  • Ruiz-Gironés, Eloi
  • Roca, Xevi
  • Sarrate, Jose
We propose a 3D mesh curving method that converts a straight-sided mesh to an optimal-quality curved high-order mesh that interpolates a CAD boundary representation. The main application of this method is the generation of discrete approximations of curved domains that are valid for simulation analysis with unstructured high-order methods. We devise the method as follows. First, the boundary of a straight-sided high-order mesh is curved to match the curves and surfaces of a CAD model. Second, the method minimizes the volume mesh distortion with respect to the coordinates of the inner nodes and the parametric coordinates of the curve and surface nodes. The proposed minimization features untangling capabilities and therefore, it repairs the invalid elements that may arise from the initial curving step. Compared with other mesh curving methods, the only goal of the proposed residual system is to minimize the volume mesh distortion. Furthermore, it is less constrained since the boundary nodes are free to slide on the CAD curves and surfaces. Hence, the proposed method is well suited to generate curved high-order meshes of optimal quality from CAD models that contain thin parts or high-curvature entities. To illustrate these capabilities, we generate several curved high-order meshes from CAD models with the implementation detailed in this work. Specifically, we detail a node-by-node non-linear iterative solver that minimizes the proposed objective function in a block Gauss–Seidel manner., This research was partially supported by CONACYT-SENER (‘‘Fondo Sectorial CONACYT SENER HIDROCARBUROS’’, grant contract 163723) and by the Spanish Ministerio de Economía y Competitividad under grant CTM2014-55014-C3-3-R.The work of the second author was partially supported by the Boeing Co. and US Air Force Office of Scientific Research and European Commis- sion through the Boeing–MIT Alliance and Computational Math Program and Marie Skłodowska-Curie Actions (HiPerMeGaFlows project),respectively., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High-order hybridizable discontinuous Galerkin formulation with fully implicit temporal schemes for the simulation of two-phase flow through porous media

  • Costa Solé, Albert
  • Ruiz Gironès, Eloi
  • Sarrate Ramos, Josep
We present a memory-efficient high-order hybridizable discontinuous Galerkin (HDG) formulation coupled with high-order fully implicit Runge-Kutta schemes for immiscible and incompressible two-phase flow through porous media. To obtain the same high-order accuracy in space and time, we propose using high-order temporal schemes that allow using large time steps. Therefore, we require unconditionally stable temporal schemes for any combination of element size, polynomial degree and time step. Specifically, we use the Radau IIA and Gauss-Legendre schemes, which are unconditionally stable, achieve high-order accuracy with few stages, and do not suffer order reduction in this problem. To reduce the memory footprint of coupling these spatial and temporal high-order schemes, we rewrite the non-linear system. In this way, we achieve a better sparsity pattern of the Jacobian matrix and less coupling between stages. Furthermore, we propose a fix-point iterative method to further reduce the memory consumption. The saturation solution may present sharp fronts. Thus, the high-order approximation may contain spurious oscillations. To reduce them, we introduce artificial viscosity. We detect the elements with high-oscillations using a computationally efficient shock sensor obtained from the saturation solution and the post-processed saturation of HDG. Finally, we present several examples to assess the capabilities of our formulation., This work has been supported by FEDER and the Spanish Government, Ministerio de Economía y Competitividad grant project contract CTM2014-55014-C3-3-R, Ministerio de Ciencia Innovación y Universidades grant project contract PGC2018-097257-B-C33 and the grant BES-2015-072833., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Automatically imposing incremental boundary displacements for valid mesh morphing and curving

  • Ruiz Gironès, Eloi
  • Gargallo Peiró, Abel
  • Sarrate Ramos, Josep
  • Roca, Xevi
We present a new incremental mesh morphing method obtained by proposing and discretizing a solution procedure for the continuous morphing problem. Our method seeks a diffeomorphism that transforms an initial domain to a final domain by only prescribing the boundary displacement. To this end, we propose to minimize the distortion of the morphing mapping constrained to satisfy the imposed boundary displacement. To solve this problem, we consider an augmented Lagrangian method in Hilbert spaces that incorporates the boundary condition in the objective function using the Lagrange multipliers and a penalty parameter. The distortion is devised to penalize the appearance of non-invertible mappings and therefore, we do not need to equip our discrete implementation with untangling capabilities. Moreover, we introduce a weight function to improve the quality of the deformation and thus, the robustness of the non-linear solver. The discretization of the continuous augmented Lagrangian method leads to a mesh morphing method suitable for large displacements and rotations of meshes with non-uniform sizing, and mesh curving of highly stretched high-order meshes., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Generation of Curved High-order Meshes with Optimal Quality and Geometric Accuracy

  • Ruiz-Girones, Eloi
  • Sarrate Ramos, Josep
  • Roca, Xevi
We present a novel methodology to generate curved high-order meshes featuring optimal mesh quality and geometric accuracy. The proposed technique combines a distortion measure and a geometric Full-size image (<1 K)-disparity measure into a single objective function. While the element distortion term takes into account the mesh quality, the Full-size image (<1 K)-disparity term takes into account the geometric error introduced by the mesh approximation to the target geometry. The proposed technique has several advantages. First, we are not restricted to interpolative meshes and therefore, the resulting mesh approximates the target domain in a non-interpolative way, further increasing the geometric accuracy. Second, we are able to generate a series of meshes that converge to the actual geometry with expected rate while obtaining high-quality elements. Third, we show that the proposed technique is robust enough to handle real-case geometries that contain gaps between adjacent entities., This research was partially supported by the Spanish Ministerio de Economía y Competitividad under grand contract CTM2014-55014-C3-3-R, and by the Government of Catalonia under grand contract 2014-SGR-1471. The work of the last author was supported by the European Commission through the Marie Sklodowska-Curie Actions (HiPerMeGaFlows project)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An HDG formulation for incompressible and immiscible two-phase porous media flow problems

  • Costa Solé, Albert
  • Ruiz Gironès, Eloi
  • Sarrate Ramos, Josep
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International journal of computational fluid dynamics on 27/05/2019, available online at: https://tandfonline.com/doi/abs/10.1080/10618562.2019.1617855, We develop a high-order hybridisable discontinuous Galerkin (HDG) formulation to solve the immiscible and incompressible two-phase flow problem in a heterogeneous porous media. The HDG method is locally conservative, has fewer degrees of freedom than other discontinuous Galerkin methods due to the hybridisation procedure, provides built-in stabilisation for arbitrary polynomial degrees and, if the error of the temporal discretisation is low enough, the pressure, the saturation and their fluxes converge with order P+1 in L2-norm, being P the polynomial degree. In addition, an element-wise post-process can be applied to obtain a convergence rate of P+2 in L2-norm for the scalar variables. All of these advantages make the HDG method suitable for solving multiphase flow trough porous media. We show numerical evidence of the convergences rates. Finally, to assess the capabilities of the proposed formulation, we apply it to several cases of water-flooding technique for oil recovery., Peer Reviewed, Postprint (author's final draft)