Pasar al contenido principal

PROCESOS MULTIETAPA PARA EL APROVECHAMIENTO INTEGRAL DE MACROALGAS Y BIOMASA VEGETAL

CTM2015-68503-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD DE VIGO
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Microwave hydrodiffusion and gravity (MHG): extraction and characterization of compounds with antioxidant properties, Hidrodifusión asistida con microondas e combinada coa gravidade (MHG): extracción e caracterización de compostos con propiedades antioxidantes, Hidrodifusión asistida con microondas y combinada con la gravedad (MHG): extracción y caracterización de compuestos con propiedades antioxidantes

  • López Hortas, Lucía
Antioxidants compounds have a high interest for the food and/or pharmaceutical industry and related industry, as well as in perfumery and cosmetic factory, phytosanitary industry and/or for the production of manufacturing products (dyes, detergents, air fresheners...). The obtaining of these compounds of an efficient and effective manner, considering economics, environmental and quality aspects, involves an extraction with alternative solvents (water and/or agricultural and industrial solvents) -in case they could not be excluded-, the reduction and/or recovery of energy consumption and the suppression of productive stages. The goal is having only one step, as safe as possible, the most robust and as controlled as possible. Microwave hydrodiffusion and gravity (MHG) technique does not use additional solvents and does extract the components of the raw material in an only one step that combines the warming by microwaves with the gravity to atmospheric pressure. Using this technique of extraction, we contribute to improve the value added to value to plant or marine resources derived from renewable sources or from the agroforestry industry. Specifically, in this work, MHG extraction technique will be applied to different raw materials (brown algae, scrub flowers, vegetables...), analysing the structural changes suffered after the extraction and determining the phenolic content and antioxidant capacity of the obtained extracts. Their colour and mechanical characteristics were also determined. Similarly, its application of any of these extracts to feeding and/or cosmetic fields will be studied., Os compostos antioxidantes posúen un elevado interese para a industria alimentaria ou farmacéutica e afíns, así coma na industria da perfumaría e cosmética, fitosanitaria ou para a elaboración de produtos industriais (tinguiduras, deterxentes, ambientadores...). A obtención destes compostos dun modo eficiente e eficaz, considerando aspectos económicos, medio ambientais e de calidade, implica unha extracción con disolventes alternativos (auga ou disolventes agroindustriais) -no caso de que non se poidan excluír- ademáis da redución ou recuperación do consumo enerxético e a supresión de etapas produtivas, perseguindo a súa redución a unha única etapa o máis segura, robusta e controlada posible. A hidrodifusión asistida con microondas e combinada coa gravidade (MHG) obedece a estas premisas ao non empregar disolventes engadidos e proceder á extracción dos compoñentes presentes na materia prima, nunha única etapa e combinando o quentamento por microondas coa gravidade a presión atmosférica. Mediante o emprego desta técnica extractiva, perséguese achegar valor engadido a recursos avexetais e de orixe mariño derivados de fontes renovables ou procedentes da industria agroforestal. En concreto, neste traballo aplicarase a extracción mediante MHG a diversas materias primas (algas pardas, flores de matogueira, vexetais...), analizando os cambios estruturais sufridos tras a extracción e determinando o contido fenólico e a capacidade antioxidante dos extractos obtidos. Tamén se determinará a súa cor e características mécanicas. Do mesmo xeito, valorarase a aplicación dalgún destes extractos no campo alimentario ou cosmético., Los compuestos antioxidantes poseen un elevado interés para la industria alimentaria o farmacéutica y afines, así como en la industria de perfumería y cosmética, fitosanitaria o para la elaboración de productos industriales (tintes, detergentes, ambientadores...). La obtención de estos compuestos de un modo eficiente y eficaz, considerando aspectos económicos, medio ambientales y de calidad, implica una extracción con disolventes alternativos (agua o disolventes agroindustriales) -en el caso de que no se puedan excluir-, además de la reducción o recuperación del consumo energético y la supresión de etapas productivas, persiguiendo su reducción a una única etapa lo más segura, robusta y controlada posible. La hidrodifusión asistida con microondas y combinada con la gravedad (MHG) obedece a estas premisas al no emplear disolventes añadidos y proceder a la extracción, de los componentes presentes en la materia prima, en una única etapa combinando el calentamiento por microondas con la gravedad a presión atmosférica. Mediante el empleo de esta técnica extractiva, se persigue aportar valor añadido a recursos vegetales o de origen marino derivados de fuentes renovables o procedentes de la industria agroforestal. En concreto, en este trabajo se aplicará la extracción mediante MHG a diversas materias primas (algas pardas, flores de matorral, vegetales…), analizando los cambios estructurales sufridos tras la extracción y determinando el contenido fenólico y la capacidad antioxidante los extractos obtenidos. También se determinará su color y características mecánicas. Asimismo, se valorará la aplicación de alguno de estos extractos en el campo alimentario o cosmético., Xunta de Galicia | Ref. ED481A 2016/228, Ministerio de Economía y Competitividad | Ref. CTM2015-68503-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Microwave hydrothermal processing of the invasive macroalgae Sargassum muticum within a green biorefinery scheme

  • Garcia Del Rio, Pablo
  • Gullon Estevez, Beatriz
  • Pérez Pérez, Alba
  • Romani Perez, Aloia
  • Garrote Velasco, Gil
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, This study deals with the multiproduct valorization of the invasive macroalgae Sargassum muticum within a green biorefinery concept using microwave hydrothermal treatment. Temperatures of 160 and 180 ◦C for 0–60 min (severities 1.62–3.54) were evaluated, allowing a recovery of a liquid phase rich in fucoidan-derived compounds (up to 4.81 g/L), oligomers and phenolics with antioxidant capacity (up to 2.85 g TE/L by ABTS assay), and a high-enzymatically susceptible solid (glucan to glucose conversion 76–100% in 9 h) suitable for bioethanol production (20.5 g/L in 18 h, corresponding to 96% ethanol yield). Moreover, energy consumption of the pre-treatments’ temperature–time binomial was evaluated showing significant differences, demonstrating the ad-vantages of microwave as alternative heating pretreatment, Agencia Estatal de Investigación | Ref. PID2019-110031RB-I00, Ministerio de Economía y Competitividad | Ref. CTM2015-68503-R, Ministerio de Ciencia, Innovación y Universidades | Ref. RYC2018-026177-I, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/04077, Xunta de Galicia | Ref. ED431C 2017/62
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Mechanical characterization of biopolymer-based hydrogels enriched with Paulownia extracts recovered using a green technique

  • Rodriguez Seoane, Paula
  • Domínguez González, Herminia
  • Torres Pérez, María Dolores
This study deals with the development and mechanical characterization of innovative starch- and gelatin-based hydrogels enriched with hydrothermal aqueous extracts from Paulownia (i.e., bark, leaves, petioles). The color, rheology, and texture properties of formulated biopolymer-based hydrogels depending on the processing conditions of the extracts was evaluated for the different Paulownia fractions. Results indicated that a clear impact on color features of the tested hydrogels was observed with the incorporation of Paulownia extracts. Rheological testing showed that weak and intermediate strength hydrogels were identified for starch- and gelatin-based hydrogels independently of used extract. A relevant softening of all gelled matrices was observed in the presence of recovered liquor extracts involving the following trend (leaves > barks > petioles). For all fractions, the highest viscoelastic features were achieved for hydrogels made with extracts recovered at 140 °C. Texture outcomes confirmed the rheological achievements. No syneresis was observed in developed hydrogels after two weeks of cold storage., Ministerio de Economía y Competitividad | Ref. BES-2016-076840, Ministerio de Economía y Competitividad | Ref. RYC2018-024454-I, Ministerio de Economía y Competitividad | Ref. CTM2015-68503-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A whole-slurry fermentation approach to high-solid loading for bioethanol production from corn stover

  • Garcia Del Rio, Pablo
  • Gullon Estevez, Patricia
  • Rebelo, F.R.
  • Romani Perez, Aloia
  • Garrote Velasco, Gil
  • Gullon Estevez, Beatriz
Corn stover is the most produced byproduct from maize worldwide. Since it is generated as a residue from maize harvesting, it is an inexpensive and interesting crop residue to be used as a feedstock. An ecologically friendly pretreatment such as autohydrolysis was selected for the manufacture of second-generation bioethanol from corn stover via whole-slurry fermentation at high-solid loadings. Temperatures from 200 to 240 °C were set for the autohydrolysis process, and the solid and liquid phases were analyzed. Additionally, the enzymatic susceptibility of the solid phases was assessed to test the suitability of the pretreatment. Afterward, the production of bioethanol from autohydrolyzed corn stover was carried out, mixing the solid with different percentages of the autohydrolysis liquor (25%, 50%, 75%, and 100%) and water (0% of liquor), from a total whole slurry fermentation (saving energy and water in the liquid–solid separation and subsequent washing of the solid phase) to employing water as only liquid medium. In spite of the challenging scenario of using the liquor fraction as liquid phase in the fermentation, values between 32.2 and 41.9 g ethanol/L and ethanol conversions up to 80% were achieved. This work exhibits the feasibility of corn stover for the production of bioethanol via a whole-slurry fermentation process., Ministerio de Economía y Competitividad | Ref. CTQ2012-30855, Ministerio de Economía y Competitividad | Ref. CTM2015-68503-R, Xunta de Galicia | Ref. ED431C 2017/62, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/04077, Agencia Estatal de Investigación | Ref. RYC2018-026177-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Green extraction processes for the valorization of Paulownia residual biomass, Procesos de extracción verde para a valorización da biomasa residual de Paulownia, Procesos de extracción verde para la valorización de la biomasa residual de Paulownia

  • Rodriguez Seoane, Paula
The Paulownia genus includes fast-growing tree species with great adaptability. In recent years, different plantations have been developed in Spain for the exploitation of Paulownia wood. However, there are residual fractions, such as bark, leaves and flowers (lignocellulosic materials that represent approximately 50% by weight of biomass) that are not used and that are the object of study of this work. The use of different extraction technologies (microwave assistance, water under pressurized conditions and carbon dioxide under supercritical conditions) and their combinations are proposed to obtain soluble fractions enriched in bioactive compounds. The composition of the solubilized and residual fractions is evaluated in terms of phenol and mono- and oligosaccharide content and the antioxidant properties of the free extracts are evaluated as radical scavenging capacity. To achieve a comprehensive use of these fractions, a possible application of the obtained solubles are proposed by the preparation of gelling complexes whose rheological properties are characterized., O xénero Paulownia coñécese por incluír especies arbóreas de rápido crecemento e gran adaptabilidade. Nestes últimos anos desenvolvéronse en España diferentes plantacións para a explotación da súa madeira. Sen embargo, existen fraccións residuais como corteza, follas e flores (materiais lignocelulósicos que representan aproximadamente o 50% en peso da biomasa) que non se aproveitan e que constitúen o obxecto de estudo deste traballo. Proponse o empleo de diferentes tecnoloxías de extracción (microondas, auga en condicións presurizadas e dióxido de carbono en condicións supercríticas) e combinacións das mesmas para a obtención de fraccións solubles enriquecidas en compostos bioactivos. Realizarase a avaliación da composición das fracciones solubilizadas e das residuais en canto ó contido fenólico e de mono e oligosacáridos, e avaliaranse as propiedades antioxidantes dos extractos como capacidade de captación de radicais libres. Para conseguir un aproveitamento integral destas fraccións estudarase a posible aplicación dos solubles obtidos mediante a preparación de complexos xelificantes cuxas propiedades reolóxicas serán caracterizadas., El género Paulownia se conoce por incluir especies arbóreas de rápido crecimiento y gran adaptabilidad. En estos últimos años se han desarrollado en España diferentes plantaciones para la explotación de su madera. Sin embargo, existen fracciones residuales como corteza, hojas y flores (materiales lignocelulósicos que representan aproximadamente el 50% en peso de la biomasa) que no se aprovechan y que constituyen el objeto de estudio de este trabajo. Se propone el empleo de diferentes tecnologías de extracción (microondas, agua en condiciones presurizadas y dióxido de carbono en condiciones supercríticas) y combinaciones de las mismas para la obtención de fracciones solubles enriquecidas en compuestos bioactivos. Se realizará la evaluación de la composición de las fracciones solubilizadas y de las residuales en cuanto al contenido fenólico y de mono y oligosacáridos y se evaluarán las propiedades antioxidantes de los extractos, evaluadas como capacidad de captación de radicales libres. Para conseguir un aprovechamiento integral de estas fracciones se estudiará la posible aplicación de los solubles obtenidos mediante la preparación de complejos gelificantes cuyas propiedades reológicas se caracterizarán., Ministerio de Ciencia e Innovación | Ref. FPI BES-2016-076840, Ministerio de Ciencia e Innovación | Ref. CTM2015-68503-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Fast-growing Paulownia wood fractionation by microwave-assisted hydrothermal treatment: a kinetic assessment

  • Garcia Del Rio, Pablo
  • Gullon Estevez, Beatriz
  • Romani Perez, Aloia
  • Garrote Velasco, Gil
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Microwave hydrothermal treatment (MHT), a novel advanced technology, was proposed for the fractionation of Paulownia wood (PW) at temperatures ranging 200–230 °C and residence times of 0–50 min, corresponding to severities of 2.93–4.70. This procedure allowed 80% of xylan recovery as xylooligosaccharides and an average of 95% cellulose recovery in the pretreated PW biomass, showing the selectivity of the treatment, that was also compared to conduction–convection heating autohydrolysis. Finally, a kinetic model was proposed for the prediction of PW fractionation using MHT, with the ultimate goal of being applied to a wide range of feedstocks and minimizing the number of parameters used. For that, two strategies were approached, allowing the reduction of 80 to 34 parameters, without significant influence in the kinetic fitting. To the best of our knowledge, this is the first kinetic modelization of MHT of PW, taking into account all the lignocellulosic fractions., Agencia Estatal de Investigación | Ref. PID2019-110031RB-I00, Ministerio de Economía y Competitividad (España) | Ref. CTM2015-68503-R, Ministerio de Educación, Cultura y Deporte (España) | Ref. FPU16/04077, Ministerio de Ciencia, Innovación y Universidades (España) | Ref. RYC2018-026177-I, Xunta de Galicia | Ref. ED431C 2017/62
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Integration of second and third generation biorefineries: valorization of fast-growing Paulownia wood and invasive macroalga Sargassum, Integración de biorrefinerías de segunda y tercera generación: valorización de la madera de rápido crecimiento de Paulownia y de la macroalga invasora Sargassum, Integración de biorrefinerías de segunda e terceira xeración: valorización da madeira de rápido crecemento de Paulownia e da macroalga invasora Sargassum

  • Garcia Del Rio, Pablo
Overall objective: Development of strategies for the exploitation of lignocellulosic materials and macroalgaes, following the biorefinery concept. Specific objective: • Collecting, preparation and characterization of the raw materials: a second-generation biomass (Paulownia wood) and a third-generation biomass (Sargassum muticum). • Study of sustainable fractionation using conventional-heating autohydrolysis and microwave-assisted autohydrolysis, and their combination with a second fractionation stage (another hydrothermal treatment or organosolv delignification) with the aim of high polysaccharide recovery from the raw materials. • Evaluation of the pretreatment effect on the enzymatic saccharification of both raw materials. • Evaluation of different configurations for saccharification and fermentation to produce second and third generation bioethanol. • Combined utilization of second and third generation biomasses for the concomitant production of marketable products and biofuels to boost the efficacy and development of biorefineries. • Valorization of the spent solid from fermentation with energy purposes. • Evaluation of the energy consumption/recovery within the overall processing., Objetivo general: Desarrollo de estrategias para el aprovechamiento de materiales lignocelulósicos y macroalgas, siguiendo el concepto de biorrefinería. Objetivos específicos: • Recolección, acondicionamiento y caracterización de las materias primas: una biomasa de segunda generación (madera de Paulownia) y una biomasa de tercera generación (Sargassum muticum). • Estudio de un fraccionamiento sostenible usando autohidrólisis asistida por calentamiento convencional y autohidrólisis asistida por microondas, y su combinación con una segunda etapa de fraccionamiento (otro tratamiento hidrotérmico o una deslignificación organosolv) con la finalidad de recuperar una gran cantidad de polisacáridos de ambas materia primas. • Evaluación del efecto del pretratamiento en la sacarificación enzimática de ambas materias primas. • Evaluación de las diferentes configuración de sacarificación y fermentación para producir bioetanol de segunda y tercera generación. • Uso combinado de las biomasas de segunda y tercera generación para la producción concomitante de productos comercializables y biocarburantes para incrementar la eficacia y el desarrollo de las biorrefinerías. • Valorización del sólido agotado de la fermentación con propósitos energéticos. • Evaluación del consumo y recuperación de la energía dentro del proceso general., Obxectivo xeral: Desenvolvemento de estratexias para o aproveitamento de materiais lignocelulósicos e macroalgas, seguindo o concepto de biorrefinería. Obxectivos específicos: • Recolección, acondicionamento e caracterización das materias primas: unha biomasa de segunda xeración (madeira de Paulownia) e unha biomasa de terceira xeración (Sargassum muticum). • Estudio dun fraccionamento sostible usando autohidrólise asistida por quentamento convencional e autohidrólise asistida por microondas, e a súa combinación cunha segunda etapa de fraccionamento (outro tratamento hidrotérmico ou unha deslignificación organosolv) coa finalidade de recuperar unha gran cantidade de polisacáridos de ambas materia primas. • Avaliación do efecto do pretratamento na sacarificación enzimática de ambas materias primas. • Avaliación das diferentes configuracións de sacarificación e fermentación para producir bioetanol de segunda e terceira xeración. • Uso combinado das biomasas de segunda e terceira xeración para a produción concomitante de produtos comercializables e biocarburantes para incrementar a eficacia e o desenvolvemento das biorrefinerías. • Valorización do sólido agotado da fermentación con propósitos enerxéticos. • Avaliación do consumo e recuperación da enerxía dentro do proceso xeral., Ministerio de Economía y Competitividad | Ref. CTM2015-68503-R, Agencia Estatal de Investigación | Ref. PID2019-110031RB-I00, Xunta de Galicia | Ref. ED431C 2017/62, Xunta de Galicia | Ref. ED481A 2017/338, Ministerio de Educación, Cultura y Deporte | Ref. FPU16/04077
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Functional features of alginates recovered from Himanthalia elongata using subcritical water extraction

  • Flórez Fernández, Noelia
  • Domínguez González, Herminia
  • Torres Pérez, María Dolores
Subcritical water extraction of Himanthalia elongata and the subsequent acetone fractionation to precipitate crude fucoidans generated a liquid phase which was used to recover alginates with a wide range of viscoelastic features and other soluble extracts with potential biological activities. The precipitated alginate was converted to sodium alginate using an environmentally friendly treatment before being characterized by Fourier transform infrared attenuated total reflectance, nuclear magnetic resonance, high performance size exclusion chromatography and rheological measurements. The cell viability of three human cell lines (A549, HCT-116, T98G) in the presence of the extracts obtained before and after acetone fractionation was assessed. Fractionation with different acetone volumes showed a slight effect in the behavior of the different tested cell lines. Results also indicated a notable effect of the processing conditions on the block structure and molar mass of the extracted biopolymer, with the subsequent impact on the rheological properties of the corresponding gelled matrices., Xunta de Galicia | Ref. ED481B 2018/071, Xunta de Galicia | Ref. ED431F 2020/01, Agencia Estatal de Investigación | Ref. RYC2018-024454-I, Ministerio de Economía y Competitividad (España) | Ref. CTM2015-68503-R
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Pressurized solvent extraction of Paulownia bark phenolics

  • Rodriguez Seoane, Paula
  • Diaz Reinoso, Beatriz
  • Domínguez González, Herminia
Paulownia bark is mostly utilized jointly with wood, but the possibility of a separate valorization through the pressurized extraction of bark bioactives has been assessed. Subcritical water extraction and supercritical CO2 extraction are green technologies allowing shorter times than conventional solvent extraction under atmospheric shaken conditions. Subcritical water extraction was carried out at temperatures ranging from 140 to 240 °C and supercritical CO2 extraction was performed at different pressures (10, 20 and 30 MPa), temperatures (35, 45 and 55 °C) and ethanol concentrations (0, 10 and 15% (w/w)). Subcritical water extraction under a non-isothermal operation during heating up to 160 °C (19 min) provided extraction yields up to 30%, and the extracts contained up to 7% total phenolics with an ABTS (2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)) radical scavenging capacity equivalent to 35% the activity of Trolox, whereas at 240 °C, the yield decreased to 20%, but the phenolic content reached 21%, and the antiradical activity was equivalent to 85% of Trolox. Supercritical CO2 extraction at 30 MPa, 45 °C and 30 min reached a global yield of 2% after 180 min of extraction, but the product showed very low antiradical capacity. Gallic acid, vanillic acid, vanillin and apigenin were the major phenolic compounds found in the extracts., Ministerio de Economia y Competitividad | Ref. CTM2015-68503-R, Ministerio de Economia y Competitividad | Ref. BES-2016-076840