Pasar al contenido principal

INVERNADEROS INTEGRADOS EN AZOTEAS: SIMBIOSIS DE ENERGIA, AGUA Y EMISIONES DE CO2 CON EL EDIFICIO - HACIA LA SEGURIDAD ALIMENTARIA URBANA EN UNA ECONOMIA CIRCULAR

CTM2016-75772-C3-3-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Laboratory-based spectral data acquisition of roof materials

  • Zambrano Prado, Perla
  • Josa Garcia-Tornel, Alejandro
  • Rieradevall Pons, Joan
  • Pérez Aragüés, Fernando
  • Marchán Hernández, Juan Fernando
  • Gassó Domingo, Santiago
  • Gabarrell Durany, Xavier
Roof characteristics such as material type and their properties information are essential to integrating urban agriculture (UA), rainwater harvesting systems (RWHS), and energy systems on roofs. Roof materials can be identified from their spectral signatures. However, this identification requires a priori knowledge of the materials’ spectral characteristics. The main perspective of this work is the future use of spectral data for roof classification. A common practice in mapping materials is the use of spectral libraries. In this regard, this work describes a novel framework for laboratory-based spectral data acquisition. The reflectance data of common, recently introduced (plastics and metals), and representative roof materials from the Mediterranean region were obtained. Data acquisition was conducted in a laboratory under controlled conditions using a high-spatial-resolution (HSR) sensor, which is usually used for airborne surveys. Large variations in the spectral reflectance data were observed due to the composition of the roof material. Flat spectral signatures were found for fibre cement, concrete, gravels and some metals, especially from the near-infrared (NIR) spectral region. Colour and surface finish greatly influence the visible (VIS) spectral range. It was confirmed that the view angle did not modify the spectral shapes. A collection of 39 spectral data of roof materials (ceramics, concrete, fibre cement, metals, plastics, paints, stone, and wood) were compiled into a spectral library that is available online., This work is part of the Fertilecity II project supported by the Spanish Ministry of Economy and Competitiveness (CTM2016-75772-C3-3-R and CTM2016-75772-C3-1-R, AEI/FEDER, UE); from the Spanish Ministry of Science, Innovation and Universities; through the María de Maeztu program for Units of Excellence (MDM-2015-0552). Authors want to thank to the University of Guadalajara (Mexico) for awarding a research scholarship to Perla Zambrano-Prado, and to the reviewers for their valuable comments., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mapping roof materials in cities for food, water, and energy production: a Mediterranean metropolitan area case study

  • Zambrano Pardo, Perla
  • Josa Garcia-Tornel, Alejandro
  • Rieradevall Pons, Joan
  • Alamús, Ramón
  • Pérez Aragüés, Fernando
  • Marchan Hernández, Juan Fernando
  • Gassó Domingo, Santiago
  • Gabarrell Durany, Xavier
In recent years, rooftops have been used as productive spaces for local resource (e.g. food, water, or energy) production. The main objective of this study is to demonstrate the potential of hyperspectral data to identify roof materials in cities. The case study area is located in a Mediterranean region north of Barcelona (Spain); diverse building typologies, building uses (residential, industrial, office, services and retail) and population densities constitute this study area. Two hyperspectral remote sensors (HRSs) were used to obtain hyperspectral images. Seven roof classes were identified using the k-means clustering algorithm. Most roofs were identified as metals (33 percent), followed by ceramic tiles (22 percent). The findings showed that 51 percent of roofs could be suitable for food, water, or energy production. Nevertheless, for a more reliable assessment of this potential, more criteria are needed., This work is part of the Fertilecity II project supported by the Spanish Ministry of Economy and Competitiveness (CTM2016-75772-C3-3-R and CTM2016-75772-C3-1-R, AEI/FEDER, UE); from the Spanish Ministry of Science, Innovation and Universities; through the María de Maeztu program for Units of Excellence (CEX2019-000940-M) and supported by MOVE4EDU. Authors want to thank to the University of Guadalajara (Mexico) for awarding a research scholarship to Perla Zambrano-Prado, and to the reviewers for their valuable comments., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::13 - Acció per al Clima, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

N2O emissions from protected soilless crops for more precise food and urban agriculture life cycle assessments

  • Llorach-Massana, Pere|||0000-0003-1162-8162
  • Muñoz Odina, Pere|||0000-0002-2931-6311
  • Riera Riera, M. Rosa
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Montero Camacho, Juan Ignacio|||0000-0003-2548-4665
  • Villalba, Gara|||0000-0001-6392-0902
Due to population growth and the subsequent increase in the demand for food, low carbon food chain production systems are a necessity to reduce the effects on climate change as much as possible. Urban agriculture is of great interest because of its potential in reducing the indirect CO2 emissions of a city's food supply by reducing transportation distances, the packaging required and the food losses that occur during transportation. However, intensive urban agriculture production, which often relies on the use of soilless substrates, requires synthetic fertilizers rich in nitrogen, resulting in N2O emissions. Presently, there is a lack of studies that determine the generation of N2O from soilless crops to properly account for their global warming potential. In this study, an open chamber system was used to quantify N2O emissions from lettuce crops with perlite bags as their substrate in a Mediterranean rooftop greenhouse located in the metropolitan area of Barcelona (Spain). N2O generation, through nitrifying and denitrifying reactions, was limited by assuring an aerobic environment, negligible water retention, the absence of NH3, and controlled dosage of NO3- in the most favorable pH conditions for plant assimilation. The emission factor (EF) measured for the soilless lettuce crop (0.0072-0.0085 kg N2O-1 per kg N-1) was half the EF of the IPCC method (0.0125 kg N2O-1 per kg N-1) for soil crops, which is commonly used in life cycle assessment (LCA) studies to approximate direct N2O emissions, for lack of a better method. Using a more appropriate EF for an LCA study of a tomato crop grown under similar conditions to those used to generate the EF resulted in a 7.5% reduction (0.06 kg CO2 eq. per kilogram of tomato production) in total global warming potential. This study shows that soilless crops reduce N2O emissions when compared to conventional crops, making urban agriculture an attractive practice for reducing GHG emissions. The results highlight the need to determine a standard method for determining an EF applicable to soilless protected crops, which, based on the parameters described here, such as the type of substrate, fertilizers and irrigation system, would allow for a more accurate environmental evaluation of soilless conventional and urban crops.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Building-integrated agriculture, a first assessment of aerobiological air quality in rooftop greenhouses (i-RTGs)

  • Ercilla Montserrat, Mireia|||0000-0002-6632-7829
  • Izquierdo Miguel, Rebeca|||0000-0001-5780-4462
  • Belmonte, Jordina|||0000-0002-6419-9595
  • Montero Camacho, Juan Ignacio|||0000-0003-2548-4665
  • Muñoz Odina, Pere|||0000-0002-2931-6311
  • De Linares Fernández, Concepción|||0000-0002-2047-3337
  • Rieradevall, Joan|||0000-0003-3360-6829
Building-integrated rooftop greenhouse (i-RTG) agriculture has intensified in recent years, due to the growing interest in the development of new agricultural spaces and in the promotion of food self-sufficiency in urban areas. This paper provides a first assessment of the indoor dynamics of bioaerosols in an i-RTG, with the aim of evaluating biological air quality in a tomato greenhouse near Barcelona. It evaluates the greenhouse workers' exposure to airborne pollen and fungal spores in order to prevent allergy problems associated with occupational tasks. Moreover, it evaluates whether the quality of the hot air accumulated in the i-RTG is adequate for recirculation to heat the building. Daily airborne pollen and fungal spore concentrations were measured simultaneously in the indoor and outdoor environments during the warm season. A total of 4,924 pollen grains/m3 were observed in the i-RTG, with a peak of 334 pollen grains/m3day, and a total of 295,038 fungal spores were observed, reaching a maximum concentration of 26,185 spores/m3day. In general, the results showed that the most important source of pollen grains and fungal spores observed indoors was the outdoor environment. However, Solanaceae pollen and several fungal spore taxa, such as the allergenic Aspergillus/Penicillium, largely originated inside the greenhouses or were able to colonize the indoor environment under favourable growing conditions. Specific meteorological conditions and agricultural management tasks are related to the highest observed indoor concentrations of pollen grains and fungal spores. Therefore, preventive measures have been suggested in order to reduce or control the levels of bioaerosols indoors (to install a system to interrupt the recirculation of air to the building during critical periods or to implement appropriate air filters in ventilation air ducts). This first evaluation could help in making decisions to prevent the development of fungal diseases, specifically those due to Oidium and Torula.
Dipòsit Digital de Documents de la UAB
Datos de investigación Set de datos (Dataset)

Spectral Library of Rooftop Urban Materials

  • Zambrano Prado, Perla|||0000-0001-5911-3585
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gassó Domingo, Santiago|||0000-0003-0481-4522
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
The Spectral Library of Rooftop Urban Materials (SLyRUM) is divided into 6 sections according to material classes, including different types of ceramics, metals, plastics, roofing tile, rocks, concrete, and wood. This library was developed with the aim to support the knowledge of spectral characteristics of rooftop materials from the Mediterranean region. The SLyRUM has been developed by the Universitat Politècnica de Catalunya and Sostenipra Research Group.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of the consumer's perception of urban food products from a soilless system in rooftop greenhouses, a case study from the Mediterranean area of Barcelona (Spain)

  • Ercilla Montserrat, Mireia|||0000-0002-6632-7829
  • Sanjuan Delmas, David|||0000-0002-5238-2069
  • Sanyé Mengual, Esther|||0000-0002-2349-9807
  • Calvet-Mir, Laura|||0000-0002-7022-6342
  • Banderas, Karla
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Soilless crops are commonly used in rooftop agriculture (RA) because they easily adapt to building constraints. However, acceptance of the produce derived from this system may be controversial. This paper evaluates consumers' acceptance of food from RA in Mediterranean cities, focusing on the quality of the product, production system, and consumers' motivations. We surveyed 238 respondents on the UAB university campus as potential consumers. The survey was distributed via an Internet-link that was provided along with a sample of tomatoes from RA. The results showed that most people approved the quality of RA products and perceived them to be local and fresh (94%). The respondents exhibited acceptance of soilless-produced tomatoes and considered them to be environmentally better than conventionally produced ones (69%). Cluster analysis revealed that consumers with high income levels and a university education had a better perception of the quality and proposed a higher price for RA products, but no difference was found regarding their environmental perception of this products. Moreover, people who possessed more information about the product also had a higher perception of the quality and production system (it was perceived to be environmentally friendly) and would pay more for them. The main concerns of consumers were related to food safety and the social impact of RA. Additional research is needed to improve the sustainability of RA, and the applied measures should be communicated to potential consumers to enhance their acceptance and success.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Assessment of the food-water-energy nexus suitability of rooftops. A methodological remote sensing approach in an urban Mediterranean area

  • Zambrano Prado, Perla|||0000-0001-5911-3585
  • Muñoz Liesa, Joan|||0000-0001-8442-6399
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Alamús Esteban, Ramón|||0000-0003-0292-5640
  • Gasso-Domingo, Santiago
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
This work established a framework to identify and analyze the technical feasibility of roofs for integrating urban agriculture, rainwater harvesting, and photovoltaic systems using various remote sensing. The framework was applied to a region north of Barcelona. Three levels of solar access requirements for tomatoes, leafy crops, strawberries, and microgreens were established. The case study included compact and disperse urban forms, residential and nonresidential building uses and various building typologies. It was identified that 8% of the roof area is feasible for tomato and lettuce production, and production could satisfy the 210% of average intake of tomatoes and the 21% average yearly consumption of lettuce. Rainwater harvesting systems could supply 94.26% of the water requirements for lettuce growing in an open-air system; in contrast, 53% of irrigation could be satisfied for tomato production in rooftop greenhouse systems. The results showed a potential for 80% of roof area to be used for rainwater harvesting systems, representing the average yearly water consumption of 44% of citizens for laundry, showering, toilet flushing, cleaning and irrigation uses. Finally, 50% of the roofs are suitable for photovoltaic panels, representing an average energy consumption of 18% of citizens.