Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Removal of pharmaceuticals from water by clay-cationic starch sorbents

  • Lozano, V.
  • Gardi, Ido
  • Nir, Shlomo
  • Undabeytia López, Tomás
9 páginas.--10 figuras.-- 2 tablas.-- 42 referencias.-- Supplementary data related to this article can be found at https://doi.org/10.1016/j.jclepro.2018.04.174., Significant concerns have been raised up due to the presence of organic micropollutants in surface waters. The ability of two polymer-clay sorbents based on a functionalized cationic starch was examined for the removal of three pharmaceuticals: atenolol, sulfamethoxazole and diclofenac sodium. In batch experiments, the complex which exhibited a planar conformation of the polymer on the clay surface and higher cationic charge density showed higher sorption of diclofenac and sulfamethoxazole over those of the composite with a loops and tails configuration, but similar with atenolol. The introduction of functional moieties on the polymers that are capable to create a network of hydrogen-bonds with the pollutants promoted their removal as revealed by thermal and infrared techniques: diclofenac molecules formed an ion pair including hydrogen bonds through their secondary amine groups; sulfamethoxazole sorbed by strong electrostatic interactions followed by proton transfer involving its sulphon-nitrogen group and the hydroxyl moieties of the composite. Filtration experiments showed a better performance of the columns made of the composite with higher cationic charge density on the removal of diclofenac and sulfamethoxazole over that of granular activated carbon. The filtration processes were successfully modeled by using an adsorption-convection model which enabled predictions under different operational conditions used in drinking water plants. Experimental removal of diclofenac by filtration within the range found in environmental concentrations was in good agreement with the predicted amounts., This research was funded by the grant NANOWAT (ref. I-B/2.1/049) within the ENPI-CBC-MED programme of the European Union; and the Spanish Ministry of Economy and Competitiveness through the projects CTM2013-42306-R and CTM2016-77168-R supported by the European Regional Development Fund (FEDER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grafted Sepiolites for the Removal of Pharmaceuticals in Water Treatment

  • Undabeytia López, Tomás
  • Madrid Díaz, Fernando
  • Vázquez Cabello, J.
  • Pérez-Martínez, José Ignacio
29 referencias.-, The increased detection of pharmaceuticals in finished drinking water has become a growing cause of concern in recent years. The removal of atenolol, ranitidine, and carbamazepine by sepiolite, following functionalization of its surface by organosilane grafting, constituted the subject of this investigation. Silylated surfaces include octyl, γ-aminopropyl, 3-chloropropyl, and triphenyl moieties. The sorption of atenolol and ranitidine was higher on sepiolite functionalized with 3-chloropropyl, while carbamazepine showed a higher sorption on sepiolite with triphenyl groups. Filtration experiments of both ranitidine and carbamazepine on octyl- and triphenyl-sepiolite, respectively, showed a higher retention of ranitidine in comparison to carbamazepine, in spite of the fact that the number of sorption sites was lower due to its higher binding rate., This research was supported by the MEC projects CTM2013-42306-R and CTM2016-77168-R. Both projects received funding from the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrocoagulation/flocculation of cyanobacteria from surface waters

  • Fuente, Alejandro de La
  • Muro-Pastor, Alicia M.
  • Merchán, F.
  • Madrid Díaz, Fernando
  • Pérez-Martínez, José Ignacio
  • Undabeytia López, Tomás
9 páginas.- 7 figuras.- 4 tablas.- 42 referencias.- Supplementary data to this article can be found online at https://doi.org/10.1016/j.jclepro.2019.117964, Cyanobacterial blooming episodes in surface waters used for drinking purposes are increasing due to eutrophication of water ecosystems. Water treatments should be optimised to remove phytoplankton cells as well as their associated toxins. The performance of a multicell electrocoagulation reactor operating under a continuous flow and coupled with flocculation for cyanobacteria removal was examined. Electrocoagulation of a suspension of the unicellular cyanobacteria Microcystis aeruginosa and its related toxin microcystin-LR, as a model of toxic cyanobacterium and cyanotoxin, respectively, showed that cell removal occurred through charge neutralisation with the Al hydroxides generated in the system, whereas the toxin did not undergo electrolytical processes. Cell inactivation was a function of the charge loading and the cell population. Inactivation of a 105 cells/mL suspension was 34% for a charge loading of 50 C/L whereas only 3% was achieved by increasing cyanobacteria concentration by one-order of magnitude. Flocculation of the electrocoagulated suspensions with anionic polyelectrolytes revealed a bridging mechanism, whereas an electrostatic patch aggregation was involved with cationic flocculants. Electrocoagulation/flocculation of a cyanobacterial blooming surface water (about 106 cells/mL) showed quite good concordance of cell inactivation values (9.7–10.7%) with those detected previously with Microcystis aeruginosa (5.4%). However, the performance of the flocculants was slightly worse as determined from the residual turbidity values (17% vs. 7% in pure cultures of M. aeruginosa) due to the different compositions of the extracellular organic matter. © 2019 Elsevier Ltd, Financial support was received by the grant CTM2016-77168-R from the Spanish Ministry of Science, Innovation and Universities supported by the European Regional Development Fund (FEDER) . The authors also acknowledge the Services of the University of Seville (CITIUS) of Biology for flow cytometer analysis, and Microanalysis and Functional Characterisation Services for determination of zeta potentials and floc sizes. The authors also thank Dr. González-Grau for his assistance in the analysis of cyanobacteria genera. Cyclus ID (Moron de la Frontera, Spain) is acknowledged by its assistance in the construction of the EC equipment. Appendix A, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organo-montmorillonites as adsorbent materials for thiophanate-methyl removal: Adsorption-desorption studies and technological applications

  • Flores, F. M.
  • Undabeytia López, Tomás
  • Jaworski, Maria
  • Morillo González, Esmeralda
  • Torres Sánchez, R. M.
10 páginas.- 9 figuras.- 8 tablas.- 54 referencias.- Supplementary material related to this article can be found, in theonline version, at doi:https://doi.org/10.1016/j.jece.2020.103806., Thiophanate-methyl (TM) is a fungicide widely used in post-harvest treatment of pears and apples. The wastewater of this treatment usually is discharged to the natural rivers without treatment, with the consequent concern about the contamination of these waters. The fungicide adsorption on montmorillonites (Mt) and organo-montmorillonites (organo-Mt) can be a good alternative for wastewater treatment containing fungicides, used as filtering materials or flocculants. The TM adsorption on Mt and organo-Mt samples was studied in batch and column systems. Different organo-Mt samples were obtained, by cationic exchange reaction with octadecyltrimethylammonium (ODTMA) and didodecyldimethylammonium (DDAB) bromide at different surfactant loading. The anionic nature of the TM generated a very low adsorption in raw Mt, while the organo-Mt samples showed an increase of TM adsorption with the content of the surfactant. These results suggest two different types of interactions between organo-Mt samples and TM. At low surfactant contents, the adsorption occurs predominantly through hydrophobic interactions between the TM and the surfactant. While when the surfactant content is above the CEC value, additionally stronger interactions appear across water bridges between the TM molecules and the surfactant ammonium group. The similar TM adsorption percentages attained by organo-Mt with DDAB than those with activated carbon, points out the first material as a promising adsorbent that could be used to remove TM from wastewater in batch and also as filters or flocculants., Financial support of Argentine Ministry of Science, Technology and Innovation - FONARSEC FS-Nano 008 and Spanish Ministry of Economy and Competitiveness (ref. CTM2016-77168-R, supported by European Regional Development Fund funds) and Spanish Agency for International Cooperation for Development - Spanish Ministry of Education A/023433/10-09, are gratefully acknowledged. R.M.T.S. is member of National Council of Scientific and Technological Research (CONICET) and F.M. Flores, acknowledged CONICET and Argentine (BEC.AR) fellowships., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Applications of Chemically Modified Clay Minerals and Clays to Water Purification and Slow Release Formulations of Herbicides

  • Undabeytia López, Tomás
  • Shuali, Uri
  • Nir, Shlomo
  • Rubin, Baruch
42 páginas.- 6 figuras.- 9 talas.- 140 referencias.- © 2020 by the authors., This review deals with modification of montmorillonite and other clay-minerals and clays by interacting them with organic cations, for producing slow release formulations of herbicides, and efficient removal of pollutants from water by filtration. Elaboration is on incorporating initially the organic cations in micelles and liposomes, then producing complexes denoted micelle- or liposome-clay nano-particles. The material characteristics (XRD, Freeze-fracture electron microscopy, adsorption) of the micelle– or liposome–clay complexes are different from those of a complex of the same composition (organo-clay), which is formed by interaction of monomers of the surfactant with the clay-mineral, or clay. The resulting complexes have a large surface area per weight; they include large hydrophobic parts and (in many cases) have excess of a positive charge. The organo-clays formed by preadsorbing organic cations with long alkyl chains were also addressed for adsorption and slow release of herbicides. Another examined approach includes “adsorptive” clays modified by small quaternary cations, in which the adsorbed organic cation may open the clay layers, and consequently yield a high exposure of the siloxane surface for adsorption of organic compounds. Small scale and field experiments demonstrated that slow release formulations of herbicides prepared by the new complexes enabled reduced contamination of ground water due to leaching, and exhibited enhanced herbicidal activity. Pollutants removed efficiently from water by the new complexes include (i) hydrophobic and anionic organic molecules, such as herbicides, dissolved organic matter; pharmaceuticals, such as antibiotics and non-steroidal drugs; (ii) inorganic anions, e.g., perchlorate and (iii) microorganisms, such as bacteria, including cyanobacteria (and their toxins). Model calculations of adsorption and kinetics of filtration, and estimation of capacities accompany the survey of results and their discussion., T. Undabeytia acknowledges financial support by the Spanish Ministry of Science and Innovation (project CTM2016-77168–R; this project received funding by the European Social Fund). S. Nir acknowledges financial support by the Ministry of Science & Technology, Israel & The Ministry of Science and Technology of the People’s Republic of China (grant No. 3-15707)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coagulation-flocculation of Microcystis aeruginosa by clay-polymer based composites (Comunicacion Congreso)

  • Undabeytia López, Tomás
  • Gardi, Ido
  • Muro-Pastor, Alicia M.
  • Mishael, Y. G.
2 páginas.- 1 figuras.- 1 tabla.- 1 referencia.- Abstract extendido de la comunicación oral presentada en la XXVI Reunión Científica de la Sociedad Española de Arcillas.- Enlace a la revista https://www.semineral.es/websem/PdfServlet?mod=archivos&subMod=publicaciones&archivo=MACLA%2026%20V5.pdf, Cyanobacteria blooming episodes in water bodies are increasing due to global warming and nutrient enrichment arising from anthropogenic activities. Their presence in water poses a risk for the environment and human health due to release of toxins. Coagulation-flocculation has been proved to be a key treatment for removal of cyanobacterial cells along Drinking Water Treatment plants avoiding the release of endotoxins by cell lysis. The combined use of cationic polymer and clay minerals can be a good approach for their use in coagulation-flocculation of cyanobacterial suspensions, relative to more conventional chemicals used. In the current work, clay-polymer complexes were examined for removal of Microcystis aeruginosa in suspensions. These complexes were prepared from polymers derived of quaternized poly-4-vinylpyridine (PVP), which were sorbed and grafted on the surface of the clay mineral montmorillonite. Quaternization was performed by introducing methyl and hydroxyethyl moieties on the pyridinic N., The authors acknowledge the Ministry of Science and Innovation for financial support (grant CTM2016-77168-R)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coagulation-flocculation of Microcystis aeruginosa by polymer-clay based composites

  • Gardi, Ido
  • Mishael, Y. G.
  • Lindahl, Marika
  • Muro-Pastor, Alicia M.
  • Undabeytia López, Tomás
9 páginas.- 6 figuras.- 2 tabla.- 1 referencia.- Supplementary data to this article can be found online at https://doi. org/10.1016/j.jclepro.2023.136356, Coagulation-flocculation is a critical treatment to reduce operational problems at Drinking Water Treatment Plants (DWTPs), created by episodes of cyanobacterial blooms in surface waters. There is a need for the search of good coaguflocculants that avoid release of intracellular toxins for a safer sustainable production. Clay-polymer interactions were examined for the development of efficient composites for their use as coaguflocculants for Microcystis aeruginosa (M. aeruginosa) suspensions. Polymers derived from poly-4-vinylpyridine (PVP) were quaternized on the pyridinic N by introducing methyl and hydroxyethyl moieties. These polymers were toxic per se; however, composites prepared either from their sorption or grafting on the clay surface of a montmorillonite exhibited null toxicity, The combination of infrared and X-ray diffraction data with thermal analysis showed a train conformation of the sorbed polymers on the clay surface whereas a brush conformation was elucidated for the grafted polymers. Only the composite prepared from grafting and subsequent quaternization with methyls was an efficient coaguflocculant, due to its high positive surface potential (+39 mV) which allowed a close contact between the quaternary moieties of the brushes and the negative cell wall. A patch flocculation mech-anism was involved, with the riks of resuspension of the coagulated cells if the composite added in excess. The optimum ratio between the amount of coagulated cyanobacteria and this composite expressed as equivalent to polymer content was 7.2 x 107 cells/mg polymer. This ratio was determined in axenic cultures of M. aeruginosa, but was reduced 5-fold in natural surface waters due to natural organic matter (NOM) content and heterogeneity. This study has demonstrated the relevance of the type of modification of the clay mineral surface with polymers to obtain good coaguflocculants of cyanobacterial cells, that can be extended to other microorganisms., This work has received financial support from the Spanish Ministry of Science and Innovation (project CTM2016-77168-R). The authors also acknowledge the Services of the University of Seville (CITIUS) of Biology for flow cytometer analysis, and of Microanalysis and Functional Characterisation for determination of zeta potentials, loading of the polymers and MC-LR analysis. They also acknowledge the Micro-scopy Service of the CIC Isla de la Cartuja., Peer reviewed