Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transient operando study on the NH3/NH4+ interplay in V-SCR monolithic catalysts

  • Rasmussen, Soren B.
  • Portela, Raquel
  • Bazin, Philippe
  • Ávila García, Pedro
  • Bañares, Miguel A.
  • Daturi, Marco
The assessment of an integral catalytic reactor facilitating operando spectroscopic measurements on a monolith has been carried out using NH3-SCR on a vanadia-based catalyst as a probe reaction. The NH3-SCR mechanism is revisited by studying the adsorbed ammonia and ionically bound ammonium ions and their relations to Lewis and Brønsted acid sites during reaction. The simultaneous presence of molecular water and ammonia adsorbed on the surface is intrinsic to low temperature NH3-SCR, and their IR absorption bands overlap in the bending region around 1600 cm−1. This has to be tackled in order to genuinely reproduce real reaction conditions and simultaneously extract relevant spectroscopic data of a working industrial monolithic catalyst. This operando study on a V2O5-WO3/TiO2–sepiolite monolith is performed without added water in the gas phase, but water formed upstream is adsorbed further down, and thus detected by FTIR spectroscopy. We observed that Multivariate Curve Resolution Alternating Least Squares (MCR-ALS) analysis of the 1620 cm−1 envelope of peaks can successfully resolve the bands of adsorbed H2O and NH3 in the monolith during transients between NH3 and NO + O2 flow. Their evolution along with that of surface ammonium ions indicates that generated water hydrolyzes molecularly dispersed vanadia species of the catalyst creating new Brønsted acid sites, and that adsorbed ammonia is either used for the SCR reaction, or converted into the ammonium ion, which then participates in the SCR reaction., This collaborative work was supported by the Spanish Ministry of Science and Innovation (CTQ2014-57578-R). MAB thanks the “Chaire d’Excellence” (FEDER − Région Basse de Normandie, France) and the “Otto Mønsted Visiting Professor” (Denmark) awards. MD and PB also thank the LABEX EMC3 for providing part of the support to this study via the contract “DRUID”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shaping up operando spectroscopy: Raman characterization of a working honeycomb monolith

  • Rasmussen, Soren B.
  • López Medina, Ricardo
  • Portela, Raquel
  • Mikolajska, Ewelina J.
  • Daturi, Marco
  • Ávila García, Pedro
  • Bañares, Miguel A.
A new monolithic reactor for operando Raman spectroscopy studies of honeycomb-shaped catalysts has been developed to obtain complete information on these systems, considering the effect of conformation on structure–activity relationships; this is illustrated by Raman-GC monitoring of alumina-supported vanadium phosphorous oxide phases during propane ammoxidation with monolithic and powdered beds., Support from the Spanish Ministry (CTQ2011-25517, CTQ2014-57578-R), the Comunidad de Madrid (S2013/MAE-2985), and CSIC (JAE-Predoc fellowship CTQ2008-04261) is acknowledged. M. A. B. acknowledges “Chaire d'Excellence” (FEDER-Region Basse-Normandie) and “Otto Mønsted Visiting Professor” awards., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel Ni-Ce-Zr/Al2O3 Cellular Structure for the Oxidative Dehydrogenation of Ethane

  • Bortolozzi, Juan Pablo
  • Portela, Raquel
  • Ávila García, Pedro
  • Milt, Viviana G.
  • Miró, Eduardo E.
A novel γ-alumina-supported Ni-Ce-Zr catalyst with cellular structure was developed for oxidative dehydrogenation of ethane (ODHE). First, powdered samples were synthesized to study the effect of both the total metal content and the Ce/Zr ratio on the physicochemical properties and performance of these catalysts. All synthesized powdered samples were highly active and selective for ODHE with a maximum ethylene productivity of 6.94 µmolethylene gact cat−1 s−1. According to the results, cerium addition increased the most reducible nickel species population, which would benefit ethane conversion, whereas zirconium incorporation would enhance ethylene selectivity through the generation of higher amounts of the least reducible nickel species. Therefore, the modification of active site properties by addition of both promoters synergistically increases the productivity of the Ni-based catalysts. The most efficient formulation, in terms of ethylene productivity per active phase amount, contained 15 wt% of the mixed oxide with Ni0.85Ce0.075Zr0.075 composition. This formulation was selected to synthesize a Ni-Ce-Zr/Al2O3 structured body by deposition of the active phase onto a homemade γ-alumina monolith. The structured support was manufactured by extrusion of boehmite-containing dough. The main properties of the Ni0.85Ce0.075Zr0.075 powder were successfully preserved after the shaping procedure. In addition, the catalytic performance of the monolithic sample was comparable in terms of ethylene productivity to that of the powdered counterpart., The authors wish to acknowledge the financial support received from ANPCyT, CONICET, UNL, and Spanish CTQ-2014-57578-R and CAM S2013/MAE-2985 projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Operando methodologies to understand structure-performance relationships in environmental catalysis on powder and shaped catalysts

  • Daturi, Marco
  • Clet, Guillaume
  • Portela, Raquel
  • Bazin, Philippe
  • Rasmussen, Soren B.
  • Ávila García, Pedro
  • Mossin, Susanne
  • Godiksen, Anita
  • Guerrero Pérez, María Olga
  • Bañares, Miguel A.
Catalysis cannot be understood without spectroscopy, which has to be made during catalytic operation so that we may connect both structure and performance, determining the states and interplay of catalyst sites and reacting molecules. An operando study on powder and shaped vanadium oxide based catalysts is reported to understand selective catalytic reduction of NOx with ammonia (SCR). The SCR process has been employed industrially for decades; it is generally accepted that the reaction follows and Eley‐Rideal type mechanism at 200°C; however the role of NH3 interaction with molecularly dispersed vanadia, and the interplay with water and NOx species is not clearly assessed yet. Raman and infrared spectroscopies provide fundamental molecular information on the states of the catalyst and surface species, while EPR provides additional insight on the states of vanadium species. The combined use of characterization of the catalysts at work provides further insight, but their coupling is complicated by the inherent constraints of each technique, this work will present our progress in understanding powder and honeycomb shaped catalysts, as well as the combination of operando methodologies., This collaborative work was supported by the Spanish Ministry MINECO (CTQ2011‐25517, CTQ2014‐57578‐R). MAB thanks the “ Chaire d’Excellence” (FEDER – Région Basse de Normandie) and the “Otto Mønsted Visiting Professor ” awards., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NO adsorption and influence of the control of temperature over catalytic test results for NO oxidation

  • Serrano-Lotina, Ana M.
  • Bueno, A. C.
  • Goberna Selma, Consuelo
  • Ávila García, Pedro
  • Bañares, Miguel A.
[EN] A preliminary partial oxidation of NO to NO2is helpful for low-temperature SCR. Oxidation of NO was evaluatedover a Pt-based catalyst. Prior to the study, which was focused on the influence of the control of temperatureover the catalytic results, PID process parameters of the catalytic reaction system were optimized showing thatthe unit control refinement is crucial for a good performance of the catalytic tests. This is particularly importantwhen a significant population of adsorbed species build on the surface of the catalyst, which is the present case;adsorption phenomena may lead to deceiving apparent conversion values. Temperature programmed desorptiontests showed that O2is essential for the NO adsorption. Three modes of heating/cooling were checked. Whenramp mode was used for controlling the temperature, adsorption/desorption phenomena led to deceptive resultsof catalytic conversion. However, when stepped mode was evaluated stationary state was reached, and then NOdisappearance was only due to NO conversion to NO2., Financial support from Spanish Government (LTNOx, CTQ2014-57578-R), and Comunidad de Madrid (AlcCones, S2013/MAE-2985) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MnOx-support interactions in catalytic bodies for selective reduction of NO with NH3

  • Serrano-Lotina, Ana M.
  • Monte, Manuel
  • Iglesias Juez, Ana
  • Pavón Cadierno, Pablo
  • Portela, Raquel
  • Ávila García, Pedro
[EN] Catalytic bodies for selective reduction of NO with NH based on MnO, TiO and sepiolite as active phase, support, and binder, respectively, were prepared. The same amount of MnO (5 w%) was added by impregnation of the precursor over a 70/30 titania/sepiolite. One catalyst was obtained by wet equilibrium impregnation of the pre-shaped support, while the other was prepared by incipient wetness impregnation of the TiO and then mixed with the binder and the PGA, and finally extruded. In order to study the role of the binder in the catalytic system, four models were also synthesized. According to characterization data and to catalytic activity results, sepiolite not only confers the rheological properties needed for extrusion, but it also modifies the physicochemical properties of the catalysts: it modulates the acidity and the NO adsorption capacity and lability, and, depending on the synthesis procedure, it enhances catalytic activity., Financial support from the Spanish Government (LTNOx, CTQ2014-57578-R; RIEN2O, CTQ2017-82335-R), and “Comunidad de Madrid” and European Structural Funds (ACES2030, S2018/EMT-4319) is gratefully acknowledged. The authors thank Professor A. Martínez-Arias from Instituto de Catálisis y Petroleoquímica (CSIC) for lending us the Bruker Equinox 55 FTIR spectrometer for performing DRIFTS studies. We thank the ESRF for access to the facilities (BM23) and we would also like to thank Debora Meira for her help during the XAS experiments.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering operando methodology: Understanding catalysis in time and space

  • Portela, Raquel
  • Pérez Ferreras, Susana
  • Serrano-Lotina, Ana M.
  • Bañares, Miguel A.
The term operando was coined at the beginning of this century to gather the growing efforts devoted to establish structure-activity relationships by simultaneously characterizing a catalyst performance and the relevant surface chemistry during genuine catalytic operation. This approach is now widespread and consolidated; it has become an increasingly complex but efficient junction where spectroscopy, materials science, catalysis and engineering meet. While for some characterization techniques kinetically relevant reactor cells with good resolution are recently developing, the knowledge gained with magnetic resonance and X-ray and vibrational spectroscopy studies is already huge and the scope of operando methodology with these techniques is recently expanding from studies with small amounts of powdered solids to more industrially relevant catalytic systems. Engineering catalysis implies larger physical domains, and thus all sort of gradients. Space- and time-resolved multi-technique characterization of both the solid and fluid phases involved in heterogeneous catalytic reactions (including temperature data) is key to map processes from different perspectives, which allows taking into account existing heterogeneities at different scales and facing up- and down-scaling for applications ranging from microstructured reactors to industrial-like macroreactors (operating with shaped catalytic bodies and/or in integral regime). This work reviews how operando methodology is evolving toward engineered reaction systems., This work was supported by Spanish Ministry grants CTQ2014-57578-R ‘LT-NOx’ and CTM2017-82335-R ‘RIEN2O’; and Comunidad de Madrid programme 2013/MAE2985 ‘ALCCONES.’
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined Operando XANES and NMR and ESR Spectroscopies for the Determination of VPO Dynamic States

  • Guerrero-Pérez, M.O.
  • Lapina, O.B.
  • Rasmussen, Soren B.
  • Bañares, Miguel A.
Nanoscaled-VPO (vanadium phosphate oxide) catalysts have been prepared on an alumina support with the objective of obtaining crystallites of the active phase with a high surface-to-volume ratio. Since the catalysed reaction occurs at the surface, these nanoscaled catalysts allows studying surface species transformations with a minimized signal from the bulk dominion. The chemical environment and oxidation state of these species has been determined by a combination of NMR, ESR and XANES spectroscopies. The results have allowed to optimize V + P coverage and V/P molar ratio to minimize the concentration of isolated vanadium oxide species and maximize V4+ concentration. The distribution of phosphorus islands ordered and significantly distorted of tetra- and penta-coordinated aluminium sites of the catalytic support, thus shaping the catalytic material to an optimal structure for the desired partial oxidation reaction. © 2023, The Author(s)., Dr. Ewelina Jankowiak is acknowledged for her help with experimental results. Spanish Ministry funded this study under project CTQ2014-57578-R. Authors thank D. Khabibulin for NMR and ESR spectra measurements. O. Lapina thanks the Ministry of Science and Higher Education of the Russian Federation within the governmental order for Boreskov Institute of Catalysis (project AAAA A21-121011390054-1) for partial support of this work. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature, Peer reviewed