Pasar al contenido principal

TRANSFORMACION DE POLIALCOHOLES EN MOLECULAS MULTIFUNCIONALIZADAS

CTQ2009-14699-C02-01

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD DE LLEIDA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Solvent-free biocatalytic interesterification of acrylate derivatives

  • Yara Varón, Edinson
  • Eras i Joli, Jordi
  • Torres i Grifo, Mercè
  • Sala i Martí, Núria
  • Villorbina Noguera, Gemma
  • Méndez, Jonh Jairo
  • Canela i Garayoa, Ramon
Materials & Technologies for a Green Chemistry (Tallinn, 2011), The ability of diverse commercial lipases and whole cells (fungal resting cells) to synthesise allyl and dichloropropyl acrylate from allyl dodecanoate through an interesterification process is presented. The process was carried out without solvent in a conventional batch system. The best biocatalyst among those studied was the commercial enzyme CALB (Candida antarctica lipase B immobilised onto a macroporous acrylic resin). The reaction was sensitive to water activity, and a decrease in the yield was observed at the highest activity studied. CALB could also be applied to diverse acrylic derivatives, although the yields decreased using either ethyl methacrylate or acrylic acid., This work was supported in part by a Grant-in-Aid for the Secretaría de Estado de Política Científica y Tecnológica of the Spanish Ministry of Education and Culture (contract grant number: CTQ2009-14699-C02-01). The authors are grateful to the Vicerrectorat de Recerca de l’Universitat de Lleida for the UdL grant of Edinson Yara Varón.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Biocatalytic preparation of dichloropropyl acrylates. Application to the synthesis of poly(dichloropropyl acrylates)

  • Yara Varón, Edinson
  • Eras i Joli, Jordi
  • Torres i Grifo, Mercè
  • Balcells Fluvià, Mercè
  • Villorbina Noguera, Gemma
  • Canela i Garayoa, Ramon
The synthesis of dichloropropyl acrylates from dichloropropyl dodecanoates through a transesterification process using diverse commercial lipases and whole cells (fungal resting cells) is presented. The synthesis was carried out in a solvent-free media using a conventional batch system and a packed bed reactor (PBR). The effect of water activity on the process depended on the lipase used. The commercial enzyme CALB (Candida antarctica lipase B immobilized onto a macroporous acrylic resin) showed the best performance as a biocatalyst, achieving a yield of 50% and productivity of 7.2 μmol min−1 g−1 in the batch reactor and 33% and 35.8 μmol min−1 g−1 in the PBR. Finally, polymeric material was prepared by suspension polymerization of the dichloropropyl acrylates synthesized using PBR. Particles with diameters between 170 and 380 μm were obtained with a yield of 85% after 18 h reaction., This work was supported in part by a Grant-in-Aid for the Secretaría de Estado de Política Científica y Tecnológica of the Spanish Ministry of Education and Culture (contract grant number: CTQ2009-14699-C02-01). The authors are grateful to the Vicerrectorat de Recerca de l’Universitat de Lleida for the UdL grant of Edinson Yara Varón. We also thank Tania Yates for the proofreading of the manuscript.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Synthesis of poly(ethyl acrylate-co-allyl acrylates) from acrylate mixtures prepared by a continuous solvent-free enzymatic process

  • Yara Varón, Edinson
  • Eras i Joli, Jordi
  • Balcells Fluvià, Mercè
  • Torres i Grifo, Mercè
  • Canela i Garayoa, Ramon
A miniaturized, packed-bed, continuous-flow reactor to carry out the enzymatic interesterification of ethyl acrylate with diverse allyl aliphatic esters is described. CALB (lipase B from Candida antarctica immobilized on a macroporous acrylic resin) was used as a biocatalyst in a solvent-free system. Allyl acrylate was produced with a conversion of 45% and productivity of 48.3 mg (g biocatalyst)−1 min−1. Then, polymeric materials were prepared from mixtures of acrylate esters. Copolymerization was achieved both in bulk and using water as the solvent. Depending on the polymerizing system used, polymerization yields were 83% and 70% after 2 h and 18 h, respectively. Successful synthesis in a miniaturized continuous-flow reactor allows the use of allyl esters obtained from renewable sources as starting materials., This work was supported in part by a Grant-in-Aid from the Secretaría de Estado de Política Científica y Tecnológica of the Spanish Ministry of Education and Culture (contract grant number: CTQ2009-14699-C02-01). The authors thank the Vicerectorat de Recerca de l’Universitat de Lleida for the grant awarded to Edinson Yara Varón.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Determination of carotenoids by liquid chromatography/mass spectrometry: effect of several dopants

  • Rivera Vélez, Sol Maiam
  • Vilaró, Francisca
  • Canela i Garayoa, Ramon
Various carotenoids were analyzed by ultra-high-pressure liquid chromatography with tandem mass spectrometry detection (UHPLC-MS/MS). Three different techniques to ionize the carotenoids were compared: electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI). For all of the carotenoids tested, it was possible to obtain characteristic transitions for their unequivocal identification using each ionization technique. APCI was shown to be a more powerful technique to ionize the carotenoids than ESI or APPI. Transitions to differentiate carotenoids that coelute were determined to distinguish antheraxanthin from astaxanthin and lutein from zeaxanthin. In addition, four dopants were evaluated to improve ionization and enhance the carotenoid signal strength in APPI. These dopants were acetone, toluene, anisole, and chlorobenzene. Carotenoids improved their response in almost all cases when a dopant was used. The use of dopants allowed the enhancement of the carotenoid signals strength up to 178-fold., We thank Dr. C. Zhu and G. Farré (Departament de Producció Vegetal i Ciència Forestal (PVCF), Universitat de Lleida, Lleida, Spain) for supplying the transgenic maize seeds; Dr. P. Christou (PVCF and Institucio Catalana de Recerca i Estudis Avancats, Barcelona, Spain) for critical comments on the manuscript and the Comissionat per a Universitats i Recerca del DIUE de la Generalitat de Catalunya (Barcelona, Spain) and to the European Social Fund (ESF) for the PhD fellowship of Sol M. Rivera. This work was supported by the University of Lleida, Ministry of Science and Innovation (MICINN), Spain (BFU200761413 and CTQ2009- 14699-C02-01) and an ERC Advanced Grant (BIOFORCE) to Paul Christou
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

H3PO4/metal halide induces a one-pot solvent-free esterification–halogenation of glycerol and diols

  • Escribà i Gelonch, Marc
  • Eras i Joli, Jordi
  • Balcells Fluvià, Mercè
  • Canela i Garayoa, Ramon
As part of our continued effort to achieve the synthesis of halohydrin esters from polyols by a sustainable method, here we report on a multicomponent inorganic acid-mediated solvent-free synthesis. The synthesis was designed to ensure few waste materials. Using this approach, the process shows a low E-factor and a high reaction mass efficiency. The new process involves the preparation of a reaction mixture containing either a fatty acid or fatty material, glycerol or diol, a halide salt and H3PO4. This mixture is heated at 100 °C for 48 h, yielding up to 88% of halohydrin ester. The process also allows recovery of pyrophosphate salts, compounds that have various applications in agriculture, and in the pharmaceutical, chemical and food industries., This work was supported in part by a Grant-in-Aid from the Secretarı´a de Estado de Polı´tica Cientı´fica y Tecnolo´gica of the Spanish Ministry of Education and Culture (Contract grant number: CTQ2009-14699-C02-01).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

From symmetric glycerol derivatives to dissymmetric chlorohydrins

  • Solarte Orozco, Carmen Eugenia
  • Escribà i Gelonch, Marc
  • Eras i Joli, Jordi
  • Villorbina Noguera, Gemma
  • Canela i Garayoa, Ramon
  • Balcells Fluvià, Mercè
The anticipated worldwide increase in biodiesel production will result in an accumulation of glycerol for which there are insufficient conventional uses. The surplus of this by-product has increased rapidly during the last decade, prompting a search for new glycerol applications. We describe here the synthesis of dissymmetric chlorohydrin esters from symmetric 1,3-dichloro-2-propyl esters obtained from glycerol. We studied the influence of two solvents: 1,4-dioxane and 1-butanol and two bases: sodium carbonate and 1-butylimidazole, on the synthesis of dissymmetric chlorohydrin esters. In addition, we studied the influence of other bases (potassium and lithium carbonates) in the reaction using 1,4-dioxane as the solvent. The highest yield was obtained using 1,4-dioxane and sodium carbonate., This work was supported by a Grant-in-Aid from the Secretaría de Estado de Política Cientifíca y Tecnológica of the Spanish Ministry of Education and Culture (contract Grant No.: CTQ2009-14699- C02-01). The authors are grateful to the Comissionat per a Universitats i Recerca del Departament d’Innovació, Universitats i Empresa de la Generalitat de Catalunya and to the European social Fund (EFS) for the FI grant of Carmen Solarte Orozco.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Analytical tools for the analysis of carotenoids in diverse materials

  • Rivera Vélez, Sol Maiam
  • Canela i Garayoa, Ramon
High-performance liquid chromatography (HPLC) has become the method of choice for carotenoid analysis. Although a number of normal-phase columns have been reported, reverse-phase columns are the most widely used stationary phases for the analysis of these molecules. C18 and C30 stationary phases have provided good resolution for the separation of geometrical isomers and carotenoids with similar polarity. More recently ultra high-performance liquid chromatography (UHPLC) has been used. UHPLC has a number of distinct advantages over conventional HPLC. These include: faster analyses (due to shorter retention times), narrower peaks (giving increased signal-to-noise ratio) and higher sensitivity. High strength silica (HSS) T3 and C18 and ethylene bridged hybrid (BEH) C18 stationary phases, with sub-2 μm particles have been used successfully for UHPLC analysis and separation of carotenoids. A number of spectroscopic and mass spectrometric techniques have also been used for carotenoid qualitative and quantitative analysis. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI/TOF-MS), atmospheric-pressure solids-analysis probe (ASAP) and Raman spectroscopy are used to profile rapidly and qualitative carotenoids present in different crude extracts. Such detection methods can be used directly for the analysis of samples without the need for sample preparation or chromatographic separation. Consequently, they allow for a fast screen for the detection of multiple analytes. Quantitative carotenoid analysis can be carried out using absorbance or mass detectors. Liquid chromatography–tandem mass spectrometry (LC–MS/MS) is efficient for carotenoid identification through the use of transitions for the detection of analytes through precursor and daughter ions. This approach is suitable for the identification of carotenoids with the same molecular mass but different fragmentation patterns. Here we review critically the latest improvements for carotenoid resolution and detection and we discuss a number of analytical techniques for qualitative and quantitative analysis of carotenoids., This work was supported by the University of Lleida, Ministry of Science and Innovation (MICINN), Spain (BFU200761413 and CTQ2009-14699-C02-01) and an ERC Advanced Grant (BIOFORCE) to Paul Christou.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Entrapment in polymeric material of resting cells of Aspergillus flavus with lipase activity. Application to the synthesis of ethyl laurate

  • Yara Varón, Edinson
  • Eras i Joli, Jordi
  • Torres i Grifo, Mercè
  • Villorbina Noguera, Gemma
  • Espart Herrero, Anna
  • Canela i Garayoa, Ramon
The lipase activity of resting cells of Aspergillus flavus was improved by entrapment in various polymeric acrylates (PAAFs). Commercially available ethyl acrylate, butyl acrylate and ethyl methacrylate, and acrylates synthesized from 1,3-dichloropropan-2-ol were used as monomers for the in situ polymerization. The cells were physically entrapped via free-radical-polymerization in aqueous medium or by bulk polymerization. The percentage of resting cells immobilized in the polymers was assessed by analysing the ergosterol content. Bulk polymerization with ethyl methacrylate allowed the greatest incorporation ratio, with 85% of entrapped biocatalyst. Entrapped resting cells were used to prepare ethyl laurate, achieving yields of up to 98%. The specific activity (r) of PAAFs was determined using a batch reactor and a packed-bed reactor (PBR). The highest r was observed for the resting cells entrapped in poly(ethyl methacrylate) using PBR. These results demonstrate that entrapped resting cells of A. flavus can be used to prepare commercial products., This work was supported in part by a Grant-in-Aid for the Secretar´ıa de Estado de Pol´ıtica Cient´ıca y Tecnol´ogica of the Spanish Ministry of Education and Culture (contract grant number: CTQ2009-14699-C02-01). The authors are grateful to the Vicerrectorat de Recerca de l'Universitat de Lleida for the UdL grant of Edinson Yara Var´on. We also thank Tania Yates for the proofreading of the manuscript.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Acylation of chiral alcohols: a simple procedure for chiral GC analysis

  • Oromí Farrús, Mireia
  • Torres i Grifo, Mercè
  • Canela i Garayoa, Ramon
The use of iodine as a catalyst and either acetic or trifluoroacetic acid as a derivatizing reagent for determining the enantiomeric composition of acyclic and cyclic aliphatic chiral alcohols was investigated. Optimal conditions were selected according to the molar ratio of alcohol to acid, the reaction time, and the reaction temperature. Afterwards, chiral stability of chiral carbons was studied. Although no isomerization was observed when acetic acid was used, partial isomerization was detected with the trifluoroacetic acid. A series of chiral alcohols of a widely varying structural type were then derivatized with acetic acid using the optimal conditions. The resolution of the enantiomeric esters and the free chiral alcohols was measured using a capillary gas chromatograph equipped with a CP Chirasil-DEX CB column. The best resolutions were obtained with 2-pentyl acetates (α = 3.00) and 2-hexyl acetates (α = 1.95). This method provides a very simple and efficient experimental workup procedure for analyzing chiral alcohols by chiral-phase GC., The authors are grateful to the Secretaría de Estado de Política Científica y Tecnológica of the Spanish Ministerio de Ciencia y Tecnología (CTQ2009-14699-C02-01) and Departament d’Universitats, Recerca i Societat de la Informació of the Generalitat de Catalunya (2001SGR00309) for financial support. M. Oromi-Farrús thanks the Ministerio de Educación y Cultura for the Predoctoral Fellowship no. AP 2001–3761.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Entrapment in polymeric material of resting cells of Aspergillus flavus with lipase activity. Application to the synthesis of ethyl laurate

  • Yara Varón, Edinson
  • Eras i Joli, Jordi
  • Torres i Grifo, Mercè
  • Villorbina Noguera, Gemma
  • Espart Herrero, Anna
  • Canela i Garayoa, Ramon
The lipase activity of resting cells of Aspergillus flavus was improved by entrapment in various polymeric acrylates (PAAFs). Commercially available ethyl acrylate, butyl acrylate and ethyl methacrylate, and acrylates synthesized from 1,3-dichloropropan-2-ol were used as monomers for the in situ polymerization. The cells were physically entrapped via free-radical-polymerization in aqueous medium or by bulk polymerization. The percentage of resting cells immobilized in the polymers was assessed by analysing the ergosterol content. Bulk polymerization with ethyl methacrylate allowed the greatest incorporation ratio, with 85% of entrapped biocatalyst. Entrapped resting cells were used to prepare ethyl laurate, achieving yields of up to 98%. The specific activity (r) of PAAFs was determined using a batch reactor and a packed-bed reactor (PBR). The highest r was observed for the resting cells entrapped in poly(ethyl methacrylate) using PBR. These results demonstrate that entrapped resting cells of A. flavus can be used to prepare commercial products., This work was supported in part by a Grant-in-Aid for the Secretar´ıa de Estado de Pol´ıtica Cient´ıca y Tecnol´ogica of the Spanish Ministry of Education and Culture (contract grant number: CTQ2009-14699-C02-01). The authors are grateful to the Vicerrectorat de Recerca de l'Universitat de Lleida for the UdL grant of Edinson Yara Var´on. We also thank Tania Yates for the proofreading of the manuscript.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Acylation of chiral alcohols: a simple procedure for chiral GC analysis

  • Oromí Farrús, Mireia
  • Torres i Grifo, Mercè
  • Canela i Garayoa, Ramon
The use of iodine as a catalyst and either acetic or trifluoroacetic acid as a derivatizing reagent for determining the enantiomeric composition of acyclic and cyclic aliphatic chiral alcohols was investigated. Optimal conditions were selected according to the molar ratio of alcohol to acid, the reaction time, and the reaction temperature. Afterwards, chiral stability of chiral carbons was studied. Although no isomerization was observed when acetic acid was used, partial isomerization was detected with the trifluoroacetic acid. A series of chiral alcohols of a widely varying structural type were then derivatized with acetic acid using the optimal conditions. The resolution of the enantiomeric esters and the free chiral alcohols was measured using a capillary gas chromatograph equipped with a CP Chirasil-DEX CB column. The best resolutions were obtained with 2-pentyl acetates (α = 3.00) and 2-hexyl acetates (α = 1.95). This method provides a very simple and efficient experimental workup procedure for analyzing chiral alcohols by chiral-phase GC., The authors are grateful to the Secretaría de Estado de Política Científica y Tecnológica of the Spanish Ministerio de Ciencia y Tecnología (CTQ2009-14699-C02-01) and Departament d’Universitats, Recerca i Societat de la Informació of the Generalitat de Catalunya (2001SGR00309) for financial support. M. Oromi-Farrús thanks the Ministerio de Educación y Cultura for the Predoctoral Fellowship no. AP 2001–3761.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

From symmetric glycerol derivatives to dissymmetric chlorohydrins

  • Solarte Orozco, Carmen Eugenia
  • Escribà i Gelonch, Marc
  • Eras i Joli, Jordi
  • Villorbina Noguera, Gemma
  • Canela i Garayoa, Ramon
  • Balcells Fluvià, Mercè
The anticipated worldwide increase in biodiesel production will result in an accumulation of glycerol for which there are insufficient conventional uses. The surplus of this by-product has increased rapidly during the last decade, prompting a search for new glycerol applications. We describe here the synthesis of dissymmetric chlorohydrin esters from symmetric 1,3-dichloro-2-propyl esters obtained from glycerol. We studied the influence of two solvents: 1,4-dioxane and 1-butanol and two bases: sodium carbonate and 1-butylimidazole, on the synthesis of dissymmetric chlorohydrin esters. In addition, we studied the influence of other bases (potassium and lithium carbonates) in the reaction using 1,4-dioxane as the solvent. The highest yield was obtained using 1,4-dioxane and sodium carbonate., This work was supported by a Grant-in-Aid from the Secretaría de Estado de Política Cientifíca y Tecnológica of the Spanish Ministry of Education and Culture (contract Grant No.: CTQ2009-14699- C02-01). The authors are grateful to the Comissionat per a Universitats i Recerca del Departament d’Innovació, Universitats i Empresa de la Generalitat de Catalunya and to the European social Fund (EFS) for the FI grant of Carmen Solarte Orozco.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Determination of carotenoids by liquid chromatography/mass spectrometry: effect of several dopants

  • Rivera Vélez, Sol Maiam
  • Vilaró, Francisca
  • Canela i Garayoa, Ramon
Various carotenoids were analyzed by ultra-high-pressure liquid chromatography with tandem mass spectrometry detection (UHPLC-MS/MS). Three different techniques to ionize the carotenoids were compared: electrospray ionization (ESI), atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI). For all of the carotenoids tested, it was possible to obtain characteristic transitions for their unequivocal identification using each ionization technique. APCI was shown to be a more powerful technique to ionize the carotenoids than ESI or APPI. Transitions to differentiate carotenoids that coelute were determined to distinguish antheraxanthin from astaxanthin and lutein from zeaxanthin. In addition, four dopants were evaluated to improve ionization and enhance the carotenoid signal strength in APPI. These dopants were acetone, toluene, anisole, and chlorobenzene. Carotenoids improved their response in almost all cases when a dopant was used. The use of dopants allowed the enhancement of the carotenoid signals strength up to 178-fold., We thank Dr. C. Zhu and G. Farré (Departament de Producció Vegetal i Ciència Forestal (PVCF), Universitat de Lleida, Lleida, Spain) for supplying the transgenic maize seeds; Dr. P. Christou (PVCF and Institucio Catalana de Recerca i Estudis Avancats, Barcelona, Spain) for critical comments on the manuscript and the Comissionat per a Universitats i Recerca del DIUE de la Generalitat de Catalunya (Barcelona, Spain) and to the European Social Fund (ESF) for the PhD fellowship of Sol M. Rivera. This work was supported by the University of Lleida, Ministry of Science and Innovation (MICINN), Spain (BFU200761413 and CTQ2009- 14699-C02-01) and an ERC Advanced Grant (BIOFORCE) to Paul Christou
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Synthesis of poly(ethyl acrylate-co-allyl acrylates) from acrylate mixtures prepared by a continuous solvent-free enzymatic process

  • Yara Varón, Edinson
  • Eras i Joli, Jordi
  • Balcells Fluvià, Mercè
  • Torres i Grifo, Mercè
  • Canela i Garayoa, Ramon
A miniaturized, packed-bed, continuous-flow reactor to carry out the enzymatic interesterification of ethyl acrylate with diverse allyl aliphatic esters is described. CALB (lipase B from Candida antarctica immobilized on a macroporous acrylic resin) was used as a biocatalyst in a solvent-free system. Allyl acrylate was produced with a conversion of 45% and productivity of 48.3 mg (g biocatalyst)−1 min−1. Then, polymeric materials were prepared from mixtures of acrylate esters. Copolymerization was achieved both in bulk and using water as the solvent. Depending on the polymerizing system used, polymerization yields were 83% and 70% after 2 h and 18 h, respectively. Successful synthesis in a miniaturized continuous-flow reactor allows the use of allyl esters obtained from renewable sources as starting materials., This work was supported in part by a Grant-in-Aid from the Secretaría de Estado de Política Científica y Tecnológica of the Spanish Ministry of Education and Culture (contract grant number: CTQ2009-14699-C02-01). The authors thank the Vicerectorat de Recerca de l’Universitat de Lleida for the grant awarded to Edinson Yara Varón.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biocatalytic preparation of dichloropropyl acrylates. Application to the synthesis of poly(dichloropropyl acrylates)

  • Yara Varón, Edinson
  • Eras i Joli, Jordi
  • Torres i Grifo, Mercè
  • Balcells Fluvià, Mercè
  • Villorbina Noguera, Gemma
  • Canela i Garayoa, Ramon
The synthesis of dichloropropyl acrylates from dichloropropyl dodecanoates through a transesterification process using diverse commercial lipases and whole cells (fungal resting cells) is presented. The synthesis was carried out in a solvent-free media using a conventional batch system and a packed bed reactor (PBR). The effect of water activity on the process depended on the lipase used. The commercial enzyme CALB (Candida antarctica lipase B immobilized onto a macroporous acrylic resin) showed the best performance as a biocatalyst, achieving a yield of 50% and productivity of 7.2 μmol min−1 g−1 in the batch reactor and 33% and 35.8 μmol min−1 g−1 in the PBR. Finally, polymeric material was prepared by suspension polymerization of the dichloropropyl acrylates synthesized using PBR. Particles with diameters between 170 and 380 μm were obtained with a yield of 85% after 18 h reaction., This work was supported in part by a Grant-in-Aid for the Secretaría de Estado de Política Científica y Tecnológica of the Spanish Ministry of Education and Culture (contract grant number: CTQ2009-14699-C02-01). The authors are grateful to the Vicerrectorat de Recerca de l’Universitat de Lleida for the UdL grant of Edinson Yara Varón. We also thank Tania Yates for the proofreading of the manuscript.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

H3PO4/metal halide induces a one-pot solvent-free esterification–halogenation of glycerol and diols

  • Escribà i Gelonch, Marc
  • Eras i Joli, Jordi
  • Balcells Fluvià, Mercè
  • Canela i Garayoa, Ramon
As part of our continued effort to achieve the synthesis of halohydrin esters from polyols by a sustainable method, here we report on a multicomponent inorganic acid-mediated solvent-free synthesis. The synthesis was designed to ensure few waste materials. Using this approach, the process shows a low E-factor and a high reaction mass efficiency. The new process involves the preparation of a reaction mixture containing either a fatty acid or fatty material, glycerol or diol, a halide salt and H3PO4. This mixture is heated at 100 °C for 48 h, yielding up to 88% of halohydrin ester. The process also allows recovery of pyrophosphate salts, compounds that have various applications in agriculture, and in the pharmaceutical, chemical and food industries., This work was supported in part by a Grant-in-Aid from the Secretarı´a de Estado de Polı´tica Cientı´fica y Tecnolo´gica of the Spanish Ministry of Education and Culture (Contract grant number: CTQ2009-14699-C02-01).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Solvent-free biocatalytic interesterification of acrylate derivatives

  • Yara Varón, Edinson
  • Eras i Joli, Jordi
  • Torres i Grifo, Mercè
  • Sala i Martí, Núria
  • Villorbina Noguera, Gemma
  • Méndez, Jonh Jairo
  • Canela i Garayoa, Ramon
Materials & Technologies for a Green Chemistry (Tallinn, 2011), The ability of diverse commercial lipases and whole cells (fungal resting cells) to synthesise allyl and dichloropropyl acrylate from allyl dodecanoate through an interesterification process is presented. The process was carried out without solvent in a conventional batch system. The best biocatalyst among those studied was the commercial enzyme CALB (Candida antarctica lipase B immobilised onto a macroporous acrylic resin). The reaction was sensitive to water activity, and a decrease in the yield was observed at the highest activity studied. CALB could also be applied to diverse acrylic derivatives, although the yields decreased using either ethyl methacrylate or acrylic acid., This work was supported in part by a Grant-in-Aid for the Secretaría de Estado de Política Científica y Tecnológica of the Spanish Ministry of Education and Culture (contract grant number: CTQ2009-14699-C02-01). The authors are grateful to the Vicerrectorat de Recerca de l’Universitat de Lleida for the UdL grant of Edinson Yara Varón.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analytical tools for the analysis of carotenoids in diverse materials

  • Rivera Vélez, Sol Maiam
  • Canela i Garayoa, Ramon
High-performance liquid chromatography (HPLC) has become the method of choice for carotenoid analysis. Although a number of normal-phase columns have been reported, reverse-phase columns are the most widely used stationary phases for the analysis of these molecules. C18 and C30 stationary phases have provided good resolution for the separation of geometrical isomers and carotenoids with similar polarity. More recently ultra high-performance liquid chromatography (UHPLC) has been used. UHPLC has a number of distinct advantages over conventional HPLC. These include: faster analyses (due to shorter retention times), narrower peaks (giving increased signal-to-noise ratio) and higher sensitivity. High strength silica (HSS) T3 and C18 and ethylene bridged hybrid (BEH) C18 stationary phases, with sub-2 μm particles have been used successfully for UHPLC analysis and separation of carotenoids. A number of spectroscopic and mass spectrometric techniques have also been used for carotenoid qualitative and quantitative analysis. Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI/TOF-MS), atmospheric-pressure solids-analysis probe (ASAP) and Raman spectroscopy are used to profile rapidly and qualitative carotenoids present in different crude extracts. Such detection methods can be used directly for the analysis of samples without the need for sample preparation or chromatographic separation. Consequently, they allow for a fast screen for the detection of multiple analytes. Quantitative carotenoid analysis can be carried out using absorbance or mass detectors. Liquid chromatography–tandem mass spectrometry (LC–MS/MS) is efficient for carotenoid identification through the use of transitions for the detection of analytes through precursor and daughter ions. This approach is suitable for the identification of carotenoids with the same molecular mass but different fragmentation patterns. Here we review critically the latest improvements for carotenoid resolution and detection and we discuss a number of analytical techniques for qualitative and quantitative analysis of carotenoids., This work was supported by the University of Lleida, Ministry of Science and Innovation (MICINN), Spain (BFU200761413 and CTQ2009-14699-C02-01) and an ERC Advanced Grant (BIOFORCE) to Paul Christou.