Pasar al contenido principal

ESTRATEGIAS EN EL DESARROLLO Y APLICACION DE LENGUAS ELECTRONICAS EMPLEANDO BIOSENSORES Y NUEVOS MATERIALES DE RECONOCIMIENTO

CTQ2010-17099

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2010
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Discrimination of soils and assessment of soil fertility using information from an ion selective electrodes array and artificial neural networks

  • Mimendia Sancho, Aitor
  • Gutiérrez Salgado, Juan Manuel
  • Alcañiz, Josep M.|||0000-0002-6438-0909
  • Valle, Manel del|||0000-0002-1032-8611
Multichannel sensor measurements combined with advanced treatment is the departure point for a new concept in sensorics, the electronic tongue. Our setup worked with an array of 20 ion selective electrodes plus an artificial neural network used as a pattern recognition method applied to soil analysis. With this design, we got a versatile tool which was able to perform qualitative and quantitative determinations. As first application, the qualitative discrimination between six distinct soil types based on their extractable components was attempted. The procedure was simplified to a single extraction step before measurements. Water, a BaCl₂ saline solution and an acetic acid extract were evaluated as extracting agents. The best performance was reached with the acetic acid extraction method with a correct classification rate and sensitivity both of 94%, and a specificity of 100%. In addition, a quantitative determination of several physicochemical properties of agricultural interest, such as organic carbon content and selected cations (like K⁺ or Mg2⁺) and anions (like NO₃¯ or Cl¯) was also demonstrated, showing satisfactory agreement with the reference methods.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Cava wine authentication employing a voltammetric electronic tongue

  • Cetó, Xavier|||0000-0003-1589-6076
  • Puig Pujol, Anna
  • Capdevila Mestres, Josefa
  • Valle, Manel del|||0000-0002-1032-8611
The application of an Electronic Tongue for the classification of cava samples based on their different ageing times is reported. As such, voltammetric responses were obtained from an array of six bulk-modified graphite-epoxy electrodes, which exhibited marked mix-responses towards the different samples. Obtained responses were then preprocessed employing FFT and the resulting coefficients were input to a LDA model which allowed the classification of the samples according to its vintage time. Besides, a quantitative model employing ANNs was built for the prediction of the total amount of sugar present in the samples, a parameter also used to classify cava samples.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Instrumental measurement of wine sensory descriptors using a voltammetric electronic tongue

  • Cetó, Xavier|||0000-0003-1589-6076
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Puig Pujol, Anna
  • Capdevila Mestres, Josefa
  • Valle, Manel del|||0000-0002-1032-8611
The approach presented herein reports the application of a voltammetric electronic tongue (ET), in contrast with a wine tasting sensory panel, as a tool for standardized wine tasting; concretely, to achieve the discrimination of different wine DOs (Denominación de Origen, a mark related to its geographical region and ensuring high-quality levels) and the prediction of the global score assigned by the trained sensory panel. To this aim, a voltammetric array of sensors based on metallic and bulk-modified graphite electrodes was used as the sensing part, while chemometric tools such as linear discriminant analysis (LDA) and artificial neural networks (ANNs) were used as the qualitative and quantitative modelling tools. Departure information was the set of voltammograms, which were first preprocessed employing fast Fourier transform(FFT), followed by removal of less-significant coefficients employing a stepwise inclusion method and pruning of the inputs. The trend, in global scores, was modelled successfully with a 92.9% of correct identification for the qualitative application, and a correlation coefficient of 0.830 for the quantitative one (with 14 and 20 samples for the external test subsets, respectively).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Use of a bioelectronic tongue for the monitoring of the photodegradation of phenolic compounds

  • Cetó, Xavier|||0000-0003-1589-6076
  • González-Calabuig, Andreu|||0000-0002-6325-138X
  • Valle, Manel del|||0000-0002-1032-8611
The application of a voltammetric bioelectronic tongue for the simultaneous monitoring of catechol, m-cresol and guaiacol in wastewater is reported. Voltammetric responses obtained from an array of bulk modified (bio)sensors, containing enzymes such as tyrosinase and laccase, were combined with chemometric tools such as artificial neural networks (ANNs) for building the quantitative prediction model. To this end, the chemometric model was first built employing a factorial design, validated employing an external test set of samples (n=14; total NRMSE of 0.076), and afterwards applied to the monitoring of the mineralization of the three phenol pollutants during a photo-Fenton advanced oxidation process.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltammetric sensor for theophylline using sol-gel immobilized molecularly imprinted polymer particles

  • Bates, Ferdia
  • Valle, Manel del|||0000-0002-1032-8611
Application of Molecularly Imprinted Polymers (MIPs) to sensor substrates holds great promise within the field of electrochemical sensing due to their low price, tailored selectivity and facile synthesis protocols. Though MIPs can be synthesised directly onto the surface of sensors via layer or film deposition, this can be difficult due to the high number of interdependent steps involved in their synthesis. For this reason, synthesis of MIP particles is more frequently employed by synthetic and non-specialist laboratories alike. There is, however a lack of immobilisation protocols for these particles. Herein, there is presented a sol-gel based immobilisation method for MIP particles for the development of an electrochemical sensor. The macroporous precipitation-polymerised particles were imprinted with Theophylline, combined with graphite in the sol-gel and deposited on an electrode surface. The sensor was tested using differential pulse voltammetry. A limit of detection of 1µM and a relative standard deviation of 6.85% was observed for the primary analyte. The electrode was regenerated via a thermal washing process with a signal loss of 29.3% following the initial regeneration and 2.35% per subsequent regeneration.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Reusable Impedimetric Aptasensor for Detection of Thrombin Employing a Graphite-Epoxy Composite Electrode

  • Ocaña Tejada, Cristina
  • Pacios Pujadó, Merce|||0000-0002-3559-4561
  • Valle, Manel del|||0000-0002-1032-8611
Here, we report the application of a label-free electrochemical aptasensor based on a graphite-epoxy composite electrode for the detection of thrombin; in this work, aptamers were immobilized onto the electrodes surface using wet physical adsorption. The detection principle is based on the changes of the interfacial properties of the electrode; these were probed in the presence of the reversible redox couple [Fe(CN)6]3-/[Fe(CN)6]4- using impedance measurements. The electrode surface was partially blocked due to formation of aptamer-thrombin complex, resulting in an increase of the interfacial electron-transfer resistance detected by Electrochemical Impedance Spectroscopy (EIS). The aptasensor showed a linear response for thrombin in the range of 7.5 pM to 75 pM and a detection limit of 4.5 pM. The aptasensor was regenerated by breaking the complex formed between the aptamer and thrombin using 2.0 M NaCl solution at 42 °C, showing its operation for different cycles. The interference response caused by main proteins in serum has been characterized.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sensor arrays and electronic tongue systems

  • Valle, Manel del|||0000-0002-1032-8611
This paper describes recent work performed with electronic tongue systems utilizing electrochemical sensors. The electronic tongues concept is a new trend in sensors that uses arrays of sensors together with chemometric tools to unravel the complex information generated. Initial contributions and also the most used variant employ conventional ion selective electrodes, in which it is named potentiometric electronic tongue. The second important variant is the one that employs voltammetry for its operation. As chemometric processing tool, the use of artificial neural networks as the preferred data processing variant will be described. The use of the sensor arrays inserted in flow injection or sequential injection systems will exemplify attempts made to automate the operation of electronic tongues. Significant use of biosensors, mainly enzyme-based, to form what is already named bioelectronic tongue will be also presented. Application examples will be illustrated with selected study cases from the Sensors and Biosensors Group at the Autonomous University of Barcelona.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Determination of total polyphenol index in wines employing a voltammetric electronic tongue

  • Cetó, Xavier|||0000-0003-1589-6076
  • Gutiérrez, Juan Manuel
  • Gutiérrez-Capitán, Manuel|||0000-0002-7347-1765
  • Céspedes, Francisco|||0000-0002-0296-6314
  • Capdevila Mestres, Josefa
  • Minguez, Santiago
  • Jiménez Jorquera, Cecilia|||0000-0003-2381-0033
  • Valle, Manel del|||0000-0002-1032-8611
This work reports the application of a voltammetric electronic tongue system (ET) made from an array of modified graphite-epoxy composites plus a gold microelectrode in the qualitative and quantitative analysis of polyphenols found in wine. Wine samples were analyzed using cyclic voltammetry without any sample pretreatment. The obtained responses were preprocessed employing discrete wavelet transform (DWT) in order to compress and extract significant features from the voltammetric signals, and the obtained approximation coefficients fed a multivariate calibration method (artificial neural network-ANN-or partial least squares-PLS-) which accomplished the quantification of total polyphenol content. External test subset samples results were compared with the ones obtained with the Folin-Ciocalteu (FC) method and UV absorbance polyphenol index (I₂₈₀) as reference values, with highly significant correlation coefficients of 0.979 and 0.963 in the range from 50 to 2400 mg L⁻¹ gallic acid equivalents, respectively. In a separate experiment, qualitative discrimination of different polyphenols found in wine was also assessed by principal component analysis (PCA).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hybrid Electronic Tongue based on Multisensor Data Fusion for Discrimination of Beers

  • Gutiérrez, Juan Manuel
  • Haddi, Zouhair
  • Amari, Aziz
  • Bouchikhi, Benachir
  • Mimendia Sancho, Aitor
  • Cetó, Xavier|||0000-0003-1589-6076
  • Valle, Manel del|||0000-0002-1032-8611
This paper reports the use of a hybrid Electronic Tongue based on data fusion of two different sensor families, applied in the recognition of beer types. Six modifiedgraphite- epoxy voltammetric sensors plus 15 potentiometric sensors formed the sensor array. The different samples were analyzed using cyclic voltammetry and direct potentiometry without any sample pretreatment in both cases. The sensor array coupled with feature extraction and pattern recognition methods, namely Principal Component Analysis (PCA) and Linear Discriminant Analysis (LDA), was trained to classify the data clusters related to different beer varieties. PCA was used to visualize the different categories of taste profiles and LDA with leave-one-out cross-validation approach permitted the qualitative classification. The aim of this work is to improve performance of existing electronic tongue systems by exploiting the new approach of data fusion of different sensor types.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Application of an electronic tongue towards the analysis of brandies

  • Cetó, Xavier|||0000-0003-1589-6076
  • Valle, Manel del|||0000-0002-1032-8611
This work reports the application of a voltammetric Electronic Tongue (ET) in the analysis of brandies, specifically in its classification according to the scores given by a skilled sensory panel and in the discrimination of different ageing methods. For this purpose, spirits were analyzed with no other pretreatment than its dilution with a saline solution to ensure enough conductivity. Recorded voltammetric signals produced by an array of six modified epoxy-composite sensors were preprocessed employing Fast Fourier Transform in order to reduce the complexity of the input signals while preserving the relevant information. Then, using the obtained coefficients, responses were evaluated using Linear Discriminant Analysis (LDA) as the pattern recognition model used to carry out the classification tasks. In both cases, good prediction ability was attained by the ET (classification rates of 100% and 97%, respectively), therefore permitting the correct classification of the different samples under study. Furthermore, two Artificial Neural Network models were also trained for the semi-quantitative identification of some undesired compounds markers of some brandy defects upper certain levels (namely butan-2-ol, ethyl acetate, acetaldehyde and butan-1-ol; r.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Beer classification by means of a potentiometric electronic tongue

  • Cetó, Xavier|||0000-0003-1589-6076
  • Gutiérrez-Capitán, Manuel|||0000-0002-7347-1765
  • Calvo Boluda, Daniel
  • Valle, Manel del|||0000-0002-1032-8611
In this work, an Electronic Tongue (ET) system based on an array of potentiometric ion-selective electrodes (ISEs) is presented for the discrimination of different commercial beer types is presented. The array was formed by 21 ISEs combining both cationic and anionic sensors with others with generic response. For this purpose beer samples were analyzed with the ET without any pretreatment rather than the smooth agitation of the samples with a magnetic stirrer in order to reduce the foaming of samples, which could interfere into the measurements. Then, the obtained responses were evaluated using two different pattern recognition methods, Principal Component Analysis (PCA) and Linear Discriminant Analysis(LDA) in order to achieve the correct recognition of samples variety. In the case of LDA, a stepwise inclusion method for variable selection based on Mahalanobis distance criteria was used to select the most discriminating variables. Finally, the results showed that the use of supervised pattern recognition methods such as LDA is a good alternative for the resolution of complex identification situations. In addition, in order to show a quantitative application, alcohol content was predicted from the array data employing an Artificial Neural Network model.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Signal amplification for thrombin impedimetric aptasensor, sandwich protocol and use of gold-streptavidin nanoparticles

  • Ocaña Tejada, Cristina
  • Valle, Manel del|||0000-0002-1032-8611
In this work, we report a highly specific amplification strategy demonstrated for the ultrasensitive biosensing of thrombin with the use of gold-streptavidin nanoparticles (strep-AuNPs) and silver reduction enhancement. The biotinylated aptamer of thrombin was immobilized onto an avidin-graphite epoxy composite (AvGEC) electrode surface by affinity interaction between biotin and avidin; electrochemical impedance measurements were performed in a solution containing the redox marker ferrocyanide/ferricyanide. The change in interfacial charge transfer resistance (Rct) experimented by the redox marker, was recorded to confirm aptamer complex formation with target protein, thrombin (Thr), in a label-free first stage. A biotinylated second thrombin aptamer, with complementary recognition properties was then used in a sandwich approach. The addition of strep-AuNPs and silver enhancement treatment led to a further increment of Rct thus obtaining significant signal amplification. The AptThrBio1-Thr-AptThrBio2 sandwich formation was inspected by confocal microcopy after incubation with streptavidin quantum dots. In order to visualize the presence of gold nanoparticles, the same silver enhancement treatment was applied to electrodes already modified with the nanoparticle-sandwich conjugate, allowing direct observation by scanning electron microscopy (SEM). Results showed high sensitivity and selectivity for thrombin detection, with an improvement from ca. 4.7 pM in a simple assay to 0.3 pM in the amplified reported scheme.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Evaluation of red wines antioxidant capacity by means of a voltammetric e-tongue with an optimized sensor array

  • Cetó, Xavier|||0000-0003-1589-6076
  • Apetrei, Constantin|||0000-0002-3823-4174
  • Valle, Manel del|||0000-0002-1032-8611
  • Rodríguez-Méndez, Maria Luz|||0000-0002-9760-362X
In this work, two sets of voltammetric sensors -prepared using different strategies- have been combined in an electronic tongue to evaluate the complete antioxidant profile of red wines. To this aim, wine samples were analyzed with the whole set of sensors. In order to reduce the large dimensionality of the data set while keeping the relevant information provided by the sensors, two different methods of feature selection and data compression were used (the kernels method and Discrete Wavelet Transform feature extraction method). Then, the coefficients obtained were used as the input variables of Principal Component Analysis (to evaluate the capability of discrimination. Partial-least squares regression (PLS) and artificial neural networks (ANNs) were performer to build the quantitative prediction models that allowed the quantification of the antioxidant capacity of the tested wines.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Array of peptide-modified electrodes for the simultaneous determination of Pb(II), Cd(II) and Zn(II)

  • Serrano i Plana, Núria
  • Prieto-Simón, Beatriz|||0000-0001-8016-1565
  • Cetó, Xavier|||0000-0003-1589-6076
  • Valle, Manel del|||0000-0002-1032-8611
This paper reports the development of three peptide modified sensors in which glutathione (GSH) and its fragments Cys-Gly and γ-Glu-Cys were immobilized respectively through aryl diazonium electrochemical grafting onto the surface of graphite-epoxy composite electrodes (GEC), and used for the simultaneous determination of Cd(II), Pb(II) and Zn(II). The concentration interval ranged from 0.1 to 1.5 μmol L-1 for each metal, and the technique used was differential pulse adsorptive stripping voltammetry. This study aimed to the comparison of the information provided by one single modified electrode at both fixed and multiple pH values (pH 6.8, 7.5 and 8.2) for the simultaneous determination of the three metals, with those supplied by the three-sensor array at multiple pH values. For the processing of the voltammograms, the fast Fourier transform was selected as the preprocessing tool for data compression coupled with an artificial neural network for the modeling of the obtained responses.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Development and application of an electronic tongue for detection and monitoring of nitrate, nitrite and ammonium levels in waters

  • Nuñez, L.
  • Cetó, Xavier|||0000-0003-1589-6076
  • Pividori, María Isabel|||0000-0002-5266-7873
  • Zanoni, Maria Valnice
  • Valle, Manel del|||0000-0002-1032-8611
This work presents the first study and development of an electronic tongue analysis system for the monitoring of nitrogen stable species: nitrate, nitrite and ammonium in water. The electronic tongue was composed of an array of 15 potentiometric poly(vinyl chloride) membrane sensors sensitive to cations and anions plus an artificial neural network (ANN) response model. The building of the ANN model was performed in a medium containing sodium, potassium, and chloride as interfering ions, thus simulating real environmental samples. The correlation coefficient in the cross-validation of nitrate, nitrite and ammonium was satisfactory in the three cases with values higher than 0.92. Finally, the utility of the proposed system is shown in the monitoring of the photoelectrocatalytic treatment of nitrate.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Voltammetric BioElectronic Tongue for the analysis of phenolic compounds in rosé cava wines

  • Cetó, Xavier|||0000-0003-1589-6076
  • Capdevila Mestres, Josefa
  • Mínguez, Santiago
  • Valle, Manel del|||0000-0002-1032-8611
A BioElectronic Tongue (BioET) based on a sensor array comprising 4 voltammetric enzyme-modified (bio)sensors plus pattern recognition and multivariate calibration data processing tools was applied towards the analysis of rosé cava wines. A total of 20 different samples from different producers were analysed using cyclic voltammetry without any sample pretreatment. Obtained responses were preprocessed employing the windowed slicing integral method in order to compress and extract significant features from the recorded data. Extracted coefficients were then evaluated by means of Principal Component Analysis to visualize some initial patterns, while quantification of different phenolic indexes was achieved by an Artificial Neural Network (ANN) model. In this manner, correlations were attempted between (bio)sensors responses and three different classical indexes related to total phenolic content (i.e. I 280 , I 320 and Folin-Ciocalteu index) plus two other indexes related to other specific phenolic features (i.e. total tannins and anthocyanins content).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A comparison of four protocols for the immobilization of an aptamer on graphite composite electrodes

  • Ocaña Tejada, Cristina
  • Valle, Manel del|||0000-0002-1032-8611
We have performed a comparative study on four protocols for the immobilization of the thrombin aptamer on a graphite-epoxy composite electrode with the aim to identify the most practical method for designing the corresponding impedimetric aptasensor. The protocols included (a) physical adsorption, (b) avidin-biotin affinity interaction, (c) electrochemical activation and covalent bonding via amide groups, and (d) electrochemical grafting using 4-carboxybenzenediazonium coupling. The properties of the sensing surface were probed by electrochemical impedance measurements in the presence of the (ferri/ferro)hexacyanide redox couple. An increase in the interfacial charge transfer resistance (Rct) was noted in all cases after the aptamer-thrombin interaction had occurred. The selectivity of the aptasensor over common serum proteins was also systematically investigated. Physical adsorption resulted in the lowest detection limit of the probe (4.5 pM), while avidin-biotin interaction resulted in highest selectivity and reproducibility exhibiting a 4.9 % relative standard deviation at pM thrombin concentration levels.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A combination of dynamic measurement protocol and advanced data treatment to resolve the mixtures of chemically similar analytes with potentiometric multisensor system

  • Kirsanov, Dmitry|||0000-0002-5667-6910
  • Cetó, Xavier|||0000-0003-1589-6076
  • Khaydukova, Maria
  • Blinova, Yulia
  • Valle, Manel del|||0000-0002-1032-8611
  • Babain, Vasily
  • Legin, Andrey
Data processing techniques and measuring protocol are very important parts of the multisensor systems methodology. Complex analytical tasks like resolving the mixtures of two components with very similar chemical properties require special attention. We report on the application of non-linear (artificial neural networks, ANNs) and linear (projections on latent structures, PLS) regression techniques to the data obtained from the flow cell with potentiometric multisensor detection of neighouring lanthanides in the Periodic System of the elements (samarium, europium and gadolinium). Quantification of individual components in mixtures is possible with reasonable precision if dynamic components of the response are incorporated thanks to the use of an automated sequential injection analysis system. The average absolute error in prediction of lanthanides with PLS was around 1×10-4 mol/L, while the use of ANNs allows the lowering of prediction errors down to 2×10-5 mol/L in certain cases. The suggested protocol seemsto be useful for other analytical applications where simultaneous determination of chemically similar analytes in mixtures is required.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Label-free impedimetric aptasensor based on epoxy-graphite electrode for the recognition of cytochrome c

  • Ocaña Tejada, Cristina
  • Arcay, Evelien
  • Valle, Manel del|||0000-0002-1032-8611
In this work, we present a label -free impedimetric aptasensor for the recognition of cytochrome c (Cyt c) at a pM concentration level based on an epoxy-graphite composite electrode. The technique employed for the detection of the protein Cyt c is electrochemical impedance spectroscopy (EIS). Detection occurs when the protein interacts with the immobilized aptamer on the aptasensor. The aptamer immobilization technique is based on its wet physical adsorption onto the electrode surface, which assures a simple, ready-to-use preparation of the biosensing platform. The work first optimizes concentration of immobilized aptamer, followed by blocking agent to avoid non specific interactions, and finally performs the label-free detection of Cyt c. The amount of protein is quantified by the observed increase of the electron-transfer resistance, determined employing EIS and the [Fe(CN) 6 ] 3-,4- redox marker. Results demonstrate that the aptasensor has a good detection range for Cyt c between 50 pM and 50 nM, as well as a high sensitivity with a low detection limit of 63.2 pM, well below levels of this protein in serum. Cross response of the developed aptamer biosensor versus potential interfering proteins also present in human serum has been fully characterized.