Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Localized, stepwise template growth of functional nanowires from an amino acid-supported framework in a microfluidic chip

  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
  • Rubio-Martínez, Marta
  • Imaz, Inhar|||0000-0002-0278-1141
  • Cvetković, Benjamin Z.
  • Abad, Llibertat|||0000-0003-2637-8629
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Amabilino, David B.|||0000-0003-1674-8462
A spatially controlled synthesis of nanowire bundles of the functional crystalline coordination polymer (CP) Ag(I)TCNQ (tetracyanoquinodimethane) from previously fabricated and trapped monovalent silver CP (Ag(I)Cys (cysteine)) using a room-temperature microfluidic-assisted templated growth method is demonstrated. The incorporation of microengineered pneumatic clamps in a two-layer polydimethylsiloxane-based (PDMS) microfluidic platform was used. Apart from guiding the formation of the Ag(I)Cys coordination polymer, this microfluidic approach enables a local trapping of the in situ synthesized structures with a simple pneumatic clamp actuation. This method not only enables continuous and multiple chemical events to be conducted upon the trapped structures, but the excellent fluid handling ensures a precise chemical activation of the amino acid-supported framework in a position controlled by interface and clamp location that leads to a site-specific growth of Ag(I)TCNQ nanowire bundles. The synthesis is conducted stepwise starting with Ag(I)Cys CPs, going through silver metal, and back to a functional CP (Ag(I)TCNQ); that is, a novel microfluidic controlled ligand exchange (CP → NP → CP) is presented. Additionally, the pneumatic clamps can be employed further to integrate the conductive Ag(I)TCNQ nanowire bundles onto electrode arrays located on a surface, hence facilitating the construction of the final functional interfaced systems from solution specifically with no need for postassembly manipulation. This localized self-supported growth of functional matter from an amino acid-based CP shows how sequential localized chemistry in a fluid cell can be used to integrate molecular systems onto device platforms using a chip incorporating microengineered pneumatic tools. The control of clamp pressure and in parallel the variation of relative flow rates of source solutions permit deposition of materials at different locations on a chip that could be useful for device array preparation. The in situ reaction and washing procedures make this approach a powerful one for the fabrication of multicomponent complex nanomaterials using a soft bottom-up approach.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis, culture medium stability, and in vitro and in vivo zebrafish embryo toxicity of metal-organic framework nanoparticles

  • Ruyra Ripoll, Àngels
  • Yazdi, Amirali|||0000-0001-9420-8504
  • Espín Martí, Jordi|||0000-0001-6381-6259
  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Roher Armentia, Nerea|||0000-0002-6659-4038
  • Lorenzo Rivera, Julia|||0000-0001-5659-6008
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic frameworks (MOFs) are among the most attractive porous materials available today. They have garnered much attention for their potential utility in many different areas such as gas storage, separation, catalysis, and biomedicine. However, very little is known about the possible health or environmental risks of these materials. Here, the results of toxicity studies on sixteen representative uncoated MOF nanoparticles (nanoMOFs), which were assessed for cytotoxicity to HepG2 and MCF7 cells in vitro, and for toxicity to zebrafish embryos in vivo, are reported. Interestingly, there is a strong correlation between their in vitro toxicity and their in vivo toxicity. NanoMOFs were ranked according to their respective in vivo toxicity (in terms of the amount and severity of phenotypic changes observed in the treated zebrafish embryos), which varied widely. Altogether these results show different levels of toxicity of these materials; however, leaching of solubilized metal ions plays a main role.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Femtolitre chemistry assisted by microfluidic pen lithography

  • Carbonell Fernández, Carlos
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • Hernando, Jordi|||0000-0002-1126-4138
  • Evangelio Castells, María Emilia
  • Barnett, Sarah A.
  • Nettikadan, Saju
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
Chemical reactions at ultrasmall volumes are becoming increasingly necessary to study biological processes, to synthesize homogenous nanostructures and to perform high-throughput assays and combinatorial screening. Here we show that a femtolitre reaction can be realized on a surface by handling and mixing femtolitre volumes of reagents using a microfluidic stylus. This method, named microfluidic pen lithography, allows mixing reagents in isolated femtolitre droplets that can be used as reactors to conduct independent reactions and crystallization processes. This strategy overcomes the high-throughput limitations of vesicles and micelles and obviates the usually costly step of fabricating microdevices and wells. We anticipate that this process enables performing distinct reactions (acid-base, enzymatic recognition and metal-organic framework synthesis), creating multiplexed nanoscale metal-organic framework arrays, and screening combinatorial reactions to evaluate the crystallization of novel peptide-based materials. Chemical reactions on femtolitre scales are necessary to study confined biological processes. Here, the authors use a microfluidic pen lithography technique to perform a series of discrete femtoscale acid-base and synthetic reactions, and crystallizations on a surface with high registration accuracy.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Freezing the nonclassical crystal growth of a coordination polymer using controlled dynamic gradients

  • Rubio Martínez, Marta
  • Imaz, Inhar|||0000-0002-0278-1141
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Abrishamkar, Afshin|||0000-0001-5957-8067
  • Sotto Mayor, Tiago
  • Rossi, René M.
  • Carbonell Fernández, Carlos
  • deMello, Andrew J.
  • Amabilino, David B.|||0000-0003-1674-8462
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Puigmarti-Luis, Josep|||0000-0002-7510-9815
An experiment was conducted to show that diffusion-limited and kinetically controlled growth regimes occurring in microfluidic devices can provide valuable insights into crystallization processes. The microfluidic channels employed in this study were structured in PDMS master form fabricated by standard photolithographic techniques. Before attaching the cured and structured PDMS mould to a glass coverslip through plasma activation, inlet holes connecting the microfluidic channels were punched with a Biopsy puncher. The cross-sectional dimensions of the microchannels were 50 μm into 50 μm for the four input microchannels, and 250 μm into 50 μm for the main reactor channel. The total length of the main reactor channel was 9 mm. Data were indexed, integrated, and scaled using HKL2000 software. The H atoms were included in theoretical positions but not refined. The low max value was due to the data collection process, which was performed in the BM16 line with only a phi scan. The structure was solved by direct methods using the program SHELXS-97. The AFM results suggest that the early stage isolated seeds organize at a single level and in a perpendicular fashion, leading to the final plate-like crystalline morphologies observed in bulk and at an FFR of 0.1.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Protecting metal-organic framework crystals from hydrolytic degradation by spray-dry encapsulating them into polystyrene microspheres

  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • Carbonell Fernández, Carlos
  • Naderi, Majid
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
A one-step, alternative, rapid, and scalable spray-drying (SD) synthesis of metal-organic frameworks (MOF)@polymer composites with enhanced hydrolytic stabilities was reported. SD was used to encapsulate preformed MOF crystals in a polymeric matrix to generate microscale MOF@polymer spheres. For proof-of-concept Hong-Kong University of Science and Technology-1 (HKUST-1) was chosen as the water-sensitive MOF, and polystyrene (PS) as the organic polymer. The synthesis of HKUST-1@PS began with preparation of a stable colloidal suspension of HKUST-1 crystals and a solution of PS in dichloromethane (DCM). This mixture was atomized using a two-fluid nozzle. After 40 min of continuous spraying, 1.7 g of a blue powder was recovered. The sample was then washed with ethanol and dried at 120°C under vacuum. This product was analyzed through field-emission scanning electron microscopy (FESEM), which indicated that it comprised smooth microspheres of HKUST-1@PS composites and did not contain any free HKUST-1. X-ray powder diffraction (XRPD) analysis of these spheres revealed a perfect match with the HKUST-1 pattern. The exclusive presence of microspheres and the match in XRPD patterns evidenced that HKUST-1 crystals were indeed entrapped within the polymeric matrix of PS.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective CO₂ capture in metal-organic frameworks with azine-functionalized pores generated by mechanosynthesis

  • Masoomi, Mohammad Yaser
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • Morsali, Ali|||0000-0002-1828-7287
  • Retailleau, Pascal
  • Maspoch, Daniel|||0000-0003-1325-9161
Two new three-dimensional porous Zn(II)-based metal-organic frameworks, containing azine-functionalized pores, have been readily and quickly isolated via mechanosynthesis, by using a nonlinear dicarboxylate and linear N-donor ligands. The use of nonfunctionalized and methyl-functionalized N-donor ligands has led to the formation of frameworks with different topologies and metal-ligand connectivities and therefore different pore sizes and accessible volumes. Despite this, both metal-organic frameworks (MOFs) possess comparable BET surface areas and CO₂ uptakes at 273 and 298 K at 1 bar. The network with narrow and interconnected pores in three dimensions shows greater affinity for CO compared to the network with one-dimensional and relatively large pores-attributable to the more effective interactions with the azine groups.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metal-organic frameworks, from molecules/metal ions to crystals to superstructures, MOFs

  • Carné-Sánchez, Arnau|||0000-0002-8569-6208
  • Imaz, Inhar|||0000-0002-0278-1141
  • Stylianou, Kyriakos C.|||0000-0003-1670-0020
  • Maspoch, Daniel|||0000-0003-1325-9161
Metal-organic frameworks (MOFs) are among the most attractive porous materials known today, exhibiting very high surface areas, tuneable pore sizes and shapes, adjustable surface functionality, and flexible structures. Advances in the formation of MOF crystals, and in their subsequent assembly into more complex and/or composite superstructures, should expand the scope of these materials in many applications (e.g., drug delivery, chemical sensors, selective reactors and removal devices, etc.) and facilitate their integration onto surfaces and into devices. This Concept article aims to showcase recently developed synthetic strategies to control the one-, two- and three-dimensional (1-, 2- and 3D) organisation of MOF crystals. Superstructures: Recent developments are described for the construction of the first-ever MOF superstructures, all of which entail control over MOF crystallisation and/or the subsequent spatial layout of the resulting crystals. These methods are characterised as 1) spontaneous higher-order assembly, 2) self-assembly using hard templates, 3) self-assembly using soft templates and 4) self-templated synthesis. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.