Pasar al contenido principal

ELIMINACION DE SILOXANOS EN LA RECUPERACION ENERGETICA DE BIOGAS DE DEPURADORA: ADSORCION Y REGENERACION MEDIANTE PROCESOS DE OXIDACION AVANZADA

CTQ2011-24114

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT DE GIRONA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Regeneration of siloxane-exhausted activated carbon by advanced oxidation processes

  • Cabrera-Codony, Alba
  • González Olmos, Rafael
  • Martín, María José
In the context of the biogas upgrading, siloxane exhausted activated carbons need to be regenerated in order to avoid them becoming a residue. In this work, two commercial activate carbons which were proved to be efficient in the removal of octamethylcyclotetrasiloxane (D4) from biogas, have been regenerated through advanced oxidation processes using both O3 and H2O2.After the treatment with O3, the activated carbon recovered up to 40% of the original adsorption capacity while by the oxidation with H2O2 the regeneration efficiency achieved was up to 45%. In order to enhance the H2O2 oxidation, activated carbon was amended with iron. In this case, the regeneration efficiency increased up to 92%, This work was funded by Ministerio de Innovacion y Ciencia (MICINN) (SIRENA CTQ2011-24114). A. Cabrera-Codony thanks Generalitat de Catalunya DEC for her predoctoral grant (2013FI_B1 00054). R. Gonzalez-Olmos also wants to thank MICINN for his Juan de la Cierva fellowship (JCI-2010-07104). LEQUIA has been recognized as consolidated research group by the Catalan Government with code 2014-SGR-1168. Authors thank Gemma Rustullet for technical support
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of biotic and abiotic graphite cathodes for hydrogen production in microbial electrolysis cells

  • Batlle Vilanova, Pau
  • Puig Broch, Sebastià
  • González Olmos, Rafael
  • Vilajeliu Pons, Anna
  • Bañeras Vives, Lluís
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Hydrogen represents a promising clean fuel for future applications. The biocathode of a two-chambered microbial electrolysis cell (biotic MEC) was studied and compared with an abiotic cathode (abiotic MEC) in order to assess the influence of naturally selected microorganisms for hydrogen production in a wide range of cathode potentials (from -400 to -1800 mV vs SHE). Hydrogen production in both MECs increased when cathode potential was decreased. Microorganisms present in the biotic MEC were identified as Hoeflea sp. and Aquiflexum sp. Supplied energy was utilized more efficiently in the biotic MEC than in the abiotic, obtaining higher hydrogen production respect to energy consumption. At -1000 mV biotic MEC produced 0.89 ± 0.10 m3 H2 d-1 m-3NCC (Net Cathodic Compartment) at a minimum operational cost of 3.2 USD kg-1 H2. This cost is lower than the estimated market value for hydrogen (6 USD kg-1 H 2), This research was financially supported by the Spanish Government (CTQ 2011-23632, CTQ 2011-24114)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust iron coordination complexes with N-based neutral ligands as efficient fenton-like catalysts at neutral pH

  • Canals Guimerà, Maite
  • González Olmos, Rafael
  • Costas Salgueiro, Miquel
  • Company Casadevall, Anna
The homogeneous Fenton-like oxidation of organic substrates in water with hydrogen peroxide, catalyzed by six different metal coordination complexes with N-based neutral ligands, was studied at ambient conditions and initial pH 7, employing hydrogen peroxide as the terminal oxidant. At low catalyst concentration, the catalytic oxidative depletion of toluene achieved by selected catalysts was much more efficient than that obtained by the Fenton reagent at pH 3. The influence of pH, the water matrix and the catalyst/hydrogen peroxide concentration were investigated for the oxidation of toluene employing [FeCl2(bpmcn)] (1, bpmcn = N,N′-bis(2-pyridylmethyl)-N, N′-dimethyl-trans-1,2-diaminocyclohexane), the most efficient catalyst of the series. Moreover, the evolution of catalysts [FeCl2(bpmcn)] (1) and [Fe(OTf)2(Pytacn)] (3, Pytacn = 1-(2-pyridylmethyl)-4,7-dimethyl- 1,4,7-triazacyclononane, OTf = trifluoromethanesulfonate anion) during the course of the reaction was also studied by electrospray ionization mass spectrometry (ESI-MS). The oxidation products derived from toluene oxidation were also analyzed. A plausible mechanism of toluene degradation using [FeCl2(bpmcn)] (1) and [Fe(OTf)2(Pytacn)] (3) as catalysts was proposed, which involves the coexistence of a metal-based path, analogous to that operating in organic media where substrate oxidation is executed by an iron(V)-oxo-hydroxo species, in parallel to a Fenton-type process where hydroxyl radicals are formed, M.C. thanks the European Research Council for a Starting Grant Fellowship (ERC-2009-StG-239910), MINECO of Spain (CTQ2012-37420-C02-01/BQU, Consolider-Ingenio CSD2010-00065) and the Catalan DIUE of the Generalitat de Catalunya (2009SGR637, and ICREA Academia Award). A.C. thanks the European Commission for a Career Integration Grant (FP7-PEOPLE-2011-CIG-303522). Ministerio de Ciencia e Innovacion (Spain) is acknowledged for financial support with the project SIRENA (CTQ2011-24114), for a Juan de la Cierva contract to R.G.-O. (JCI-2010-07104) and for a Ramon y Cajal contract to A. C. (RYC-2011-08683). Mr. Z. Codola is acknowledged for his help with the experimental setup for the determination of the overpressure generated into the reactors
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Integration of advanced oxidation processes at mild conditions in wet scrubbers for odourous sulphur compounds treatment

  • Vega Martínez, Esther
  • Martín, María José
  • González Olmos, Rafael
The effectiveness of different advanced oxidation processes on the treatment of a multicomponent aqueous solution containing ethyl mercaptan, dimethyl sulphide and dimethyl disulphide (0.5mgL-1 of each sulphur compound) was investigated with the objective to assess which one is the most suitable treatment to be coupled in wet scrubbers used in odour treatment facilities. UV/H2O2, Fenton, photo-Fenton and ozone treatments were tested at mild conditions and the oxidation efficiency obtained was compared. The oxidation tests were carried out in magnetically stirred cylindrical quartz reactors using the same molar concentration of oxidants (hydrogen peroxide or ozone). The results show that ozone and photo-Fenton are the most efficient treatments, achieving up to 95% of sulphur compounds oxidation and a mineralisation degree around 70% in 10min. Furthermore, the total costs of the treatments taking into account the capital and operational costs were also estimated for a comparative purpose. The economic analysis revealed that the Fenton treatment is the most economical option to be integrated in a wet scrubber to remove volatile organic sulphur compounds, as long as there are no space constraints to install the required reactor volume. In the case of reactor volume limitation or retrofitting complexities, the ozone and photo-Fenton treatments should be considered as viable alternatives, R. Gonzalez-Olmos thanks MICINN (Ministerio de Ciencia e Innovacion) for the Juan de la Cierva fellowship (JCI-2010-07104). The authors also greatly appreciate financial support from the Spanish MICINN (projects PET2008_0261, CTQ2011-24114)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of the effect of UV and chlorination in the transformation of fragrances in aqueous samples

  • Godayol Boix, Anna
  • González Olmos, Rafael
  • Sánchez Navarro, Juan Manuel
  • Anticó i Daró, Ma. Enriqueta
The removal and transformation of 15 common fragrance allergens and two polycyclic musks in water samples were studied using UV irradiation and chlorination treatments. The monitoring of the reaction was carried out by a HS-SPME method coupled to GC-MS analysis. Different behaviours were observed depending on the compound and the treatment applied. Elimination experiments showed that all target compounds were affected by at least one of the two treatments. A total of 15 UV transformation products were detected and chemical structures were proposed for five of them. In the chlorination experiments, only galaxolide and benzyl cinnamate transformation products were observed, A. Godayol gratefully acknowledges a grant from the Generalitat de Catalunya (2013FI_B2 00126). R. Gonzalez-Olmos thanks MICINN for the Juan de la Cierva fellowship (JCI-2010-07104). This work was funded by the Ministerio de Innovacion y Ciencia (MICINN) (CTQ2011-24114). The authors are grateful to A. Roglans and A. Pla for their help with the investigation of the reaction pathways
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adsorption of odorous sulfur compounds onto activated carbons modified by gamma irradiation

  • Vega Martínez, Esther
  • Sánchez-Polo, Manuel
  • González Olmos, Rafael
  • Martín, María José
A commercial activated carbon (AC) was modified by gamma irradiation and was tested as adsorbent for the removal of ethyl mercaptan, dimethyl disulfide and dimethyl disulfide in wet conditions. Modifications were carried out under five different conditions: irradiation in absence of water, in presence of ultrapure water, in ultrapure water at pH = 1.0 and 1000 mg L-1 Cl-, in ultrapure water at pH = 7.5 and 1000 mg L-1 Br-, and in ultrapure water at pH = 12.5 and 1000 mg L-1 NO3-. The chemical properties of each AC were characterized by elemental analysis, temperature programmed desorption and X-ray photoelectron spectroscopy. Outcomes show that a large number of oxygen functional groups were incorporated in the AC surface by gamma irradiation, especially in the AC irradiated in the presence of ultrapure water. The dynamic adsorption test results reveal that the incorporation of oxygen functional groups did not enhance the adsorption capacities for dimethyl sulfide and dimethyl disulfide. A significant improvement in the ethyl mercaptan adsorption capacity was correlated with the incorporation of phenolic groups in the AC surface. Moreover, diethyl disulfide was detected as by-product of ethyl mercaptan oxidation process under wet conditions and its formation depended on the chemical properties of ACs, R. Gonzalez-Olmos thanks MICINN (Ministerio de Ciencia e Innovacion) for the Juan de la Cierva fellowship (JCI-2010-07104). The authors also greatly appreciate financial support from the Spanish MICINN (projects PET2008_0261, CTQ2011-24114). LEQUIA has been recognized as consolidated research group by the Catalan Government with code 2014-SGR-1168
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Coupling anammox and advanced oxidation-based technologies for mature landfill leachate treatment

  • Anfruns Bagaria, Alba
  • Gabarró i Bartual, Jordi
  • González Olmos, Rafael
  • Puig Broch, Sebastià
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
The aim of this study was to evaluate the suitability to couple anammox process with advanced oxidation processes (AOPs) to treat mature landfill leachate with high nitrogen and non-biodegradable organic matter concentrations (2309±96mgN-TNL-1 and 6200±566mgCODL-1). The combination of a partial nitiration-anammox system coupled with two AOP-based technologies (coagulation/flocculation+ozonation and photo-Fenton) was assessed in terms of nitrogen and carbon removal. Total nitrogen removal efficiency within a range of 87-89% was obtained with both configurations without the need of any external carbon source. The COD removal efficiencies attained were 91% with coagulation/flocculation+ozonation and 98% with photo-Fenton. Applying the biological treatment prior to advanced oxidation processes-based technologies reduced the quantity of needed reagents giving attaining higher removal efficiencies. From a basic economical point of view and taking into account the results of this study, the combination of partial nitritation-anammox system with photo-Fenton treatment was more favorable than with coagulation/flocculation+ozonation treatment, This work was founded by the Spanish Government (CONSOLIDER CSD2007-00055, ITACA, SIRENA CTQ2011-24114 and N-OPTIMMOX IPT-2011-1073-310000). J. Gabarro would like to thank the University of Girona for his predoctoral fellowship (BR 2011). Dr. Gonzalez-Olmos wishes to thank the Ministerio de Ciencia e Innovacion (Spain) for the Juan de la Cierva fellowship (JCI-2010-07104)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Continuous acetate production through microbial electrosynthesis from CO2 with microbial mixed culture

  • Batlle Vilanova, Pau
  • Puig Broch, Sebastià
  • González Olmos, Rafael
  • Balaguer i Condom, Maria Dolors
  • Colprim Galceran, Jesús
Microbial electrosynthesis represents a promising approach for renewable energy storage in which chemically stable compounds are produced using CO2 as feedstock. This report describes the continuous production of acetate through microbial electrosynthesis from CO2 and assesses how the production rates could be increased. RESULTS: A continuous acetate production rate of 0.98mmol C LNCC-1 d-1 was obtained using CO2 as feedstock and with pH control around 5.8. These conditions increased substrate availability and favoured microbial electrosynthesis. Cyclic voltammograms demonstrated the electroautotrophic activity on the biocathode surface, which increased with pH control and caused current demand and acetate production rate to rise exponentially. CONCLUSION: pH decrease was shown to be an effective strategy to increase substrate availability and enhance microbial electrosynthesis. By making microbial electrosynthesis a feasible technology, CO2 could become an alternative feedstock for the carboxylate platform. © 2015 Society of Chemical Industry, This research was supported financially by the Spanish Government (CTQ 2011–23632, CTQ 2011–24114)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Biogas upgrading: Optimal activated carbon properties for siloxane removal

  • Cabrera-Codony, Alba
  • Montes Morán, Miguel A.
  • Sánchez-Polo, Manuel
  • Martín, María José
  • González Olmos, Rafael
A total of 12 commercial activated carbons (ACs) have been tested for the removal of octamethylcyclotetrasiloxane (D4) in dynamic adsorption experiments using different carrier gases and D4 concentrations. Characterization of the ACs included several physical and chemical techniques. The D4 adsorption capacities were strongly related with the textural development of the ACs. Results showed that the optimum adsorbent for D4 is a wood-based chemically activated carbon, which rendered an adsorption capacity of 1732 ± 93 mg g-1 using 1000 ppm (v/v) of D4 with dry N2 as the carrier gas. When the concentration of D4 was lowered to typical values found in biogas, the adsorption capacity was halved. The presence of major biogas compounds (i.e., CH4 and CO2) and humidity further reduced the D4 adsorption capacity. The polymerization of D4 over the surface of all ACs was found to be relevant after prolonged contact times. The extent of this phenomenon, which may negatively affect the thermal regeneration of the AC, correlated reasonably well with the presence of phenolic and carboxylic groups on the carbon surfaces, This work was funded by the Ministerio de Innovacion y Ciencia (MICINN) (SIRENA CTQ2011-24114 and NOVE-DAR CSD2007-00055). Alba Cabrera-Codony thanks Generalitat de Catalunya DEC for her predoctoral grant (2013F1_B100054). Rafael Gonzalez-Olmos also thanks MICINN for his Juan de la Cierva fellowship (JCI-2010-07104)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Integrated side-stream reactor for biological nutrient removal and minimization of sludge production

  • Coma Bech, Marta
  • Rovira, Salvador
  • Canals, Joan
  • Colprim Galceran, Jesús
Integrated processes to reduce in situ the sludge production in wastewater treatment plants are gaining attention in order to facilitate excess sludge management. In contrast to post-treatments, such as anaerobic digestion which is placed between the activated sludge system and dewatering processes, integrated technologies are placed in the sludge return line. This study evaluates the application of an anoxic side-stream reactor (SSR) which creates a physiological shock and uncouples the biomass metabolism and diverts the activity from assimilation for biosynthesis to non-growth activities. The effect of this system in biological nutrient removal for both nitrogen and phosphorus was evaluated for the anaerobic, anoxic and aerobic reactors. The RedOx potential within the SSR was maintained at - 150 mV while the sludge loading rate was modified by increasing the percentage of recycled activated sludge feed to the SSR (0 and 40% at laboratory scale and 0, 10, 50 and 100% at pilot scale). The use of the SSR presented a slight reduction of phosphorus removal but maintained the effluent quality to the required discharge values. Nitrogen removal efficiency increased from 75 to 86% while reducing the sludge production rate by 18.3%, This research was financially supported by the Spanish Government (CSD2007-00055, CTQ2011-23632, CTQ2011-24114/PPQ, 033/RN08/03.2 and IPT-2011-1073-310000) and OHL Medio Ambiente, INIMA SAU
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimizing chemical conditioning for odour removal of undigested sewage sludge in drying processes

  • Vega Martínez, Esther
  • Monclús Sales, Hèctor
  • González Olmos, Rafael
  • Martín, María José
Emission of odours during the thermal drying in sludge handling processes is one of the main sources of odour problems in wastewater treatment plants. The objective of this work was to assess the use of the response surface methodology as a technique to optimize the chemical conditioning process of undigested sewage sludges, in order to improve the dewaterability, and to reduce the odour emissions during the thermal drying of the sludge. Synergistic effects between inorganic conditioners (iron chloride and calcium oxide) were observed in terms of sulphur emissions and odour reduction. The developed quadratic models indicated that optimizing the conditioners dosage is possible to increase a 70% the dewaterability, reducing a 50% and 54% the emission of odour and volatile sulphur compounds respectively. The optimization of the conditioning process was validated experimentally, R. Gonzalez-Olmos thanks MICINN (Ministerio de Ciencia e Innovacion) for the Juan de la Cierva fellowship (JCI-2010-07104). H. Monclus thanks to People Programme (Marie Curie Action) of the European Union's Seventh Framework Programme (FP7/2007-2013) and from ACCIO under REA grant agreement (no 600388) for TECNIOSPRING fellowship (TECSPR13-1-0050). The authors also greatly appreciate financial support from the Spanish MICINN (projects PET2008_0261, CTQ2011-24114). LEQUIA has been recognised as consolidated research group by the Catalan Government with code 2014-SGR-1168
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Minimization of sludge production by a side-stream reactor under anoxic conditions in a pilot plant

  • Coma Bech, Marta
  • Rovira, Salvador
  • Canals, Joan
  • Colprim Galceran, Jesús
This study evaluates the application of an anoxic side-stream reactor in the sludge return line of a conventional activated sludge system for the reduction of biomass production. The oxidation-reduction potential was maintained at -150mV while the applied sludge loading rate was modified by changing the percentage of return sludge treated in this reactor. The observed yield from the conventional system (0.513kg VSSkg-1 COD) was continuously reduced when the portion of return sludge treated was increased. A maximum reduction of 18.3% of the observed yield was obtained treating the whole sludge return line. The sludge age maintained through the experiment. The organic matter removal was not deteriorated, even improved, by the proposed plant modification. Thus, simply applying an anoxic side-stream reactor would decrease the final volume of waste sludge while maintaining the sludge retention time and would, in fact, decrease the economic costs in terms of sludge handling, This research was financially supported by the Spanish Government (CSD2007-00055, CTQ2011-23632, CTQ2011-24114/PPQ, 033/RN08/03.2 and IPT-2011-1073-310000) and GS Inima
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

New insights into the influence of activated carbon surface oxygen groups on H2O2 decomposition and oxidation of pre-adsorbed volatile organic compounds

  • Anfruns Bagaria, Alba
  • García-Suárez, Eduardo J.
  • Montes Morán, Miguel A.
  • González Olmos, Rafael
  • Martín, María José
In this study, the influence of the surface oxygen groups of activated carbons (ACs) on the decomposition of H2O2 and the consequent OH radicals generation is investigated. The oxidation of pre-adsorbed volatile organic compounds by H2O2 is also studied. Four ACs, with low percentage of inorganic matter (<0.2%), similar textural properties but differing in their surface oxygen content were evaluated. The surface oxygen groups of the ACs were characterised by using appropriate characterisation techniques (temperature programmed desorption and X-ray photoelectron spectroscopy). The kinetic curves of H2O2 decomposition were very similar for all the ACs. However, different profiles in the production of OH radicals were observed. OH radicals generation seemed to be promoted by low surface oxygen contents. Oxidation of two volatile organic compounds (VOCs) of different polarity, methyl ethyl ketone (MEK) and toluene, pre-adsorbed onto the ACs was finally investigated. H2O2 was used as oxidising agent. Both VOCs presented similar maximum oxidation rates, around 70%, in spite of their different hydrophobicity. Some evidences are provided supporting that oxidation of pre-adsorbed VOCs can take place in the inner pore structure of the ACs, This work was funded by MICINN (CTQ2008-06869, CTQ2011-24114 and CONSOLIDER Project CSD-2007-0055). A. Anfruns thanks University of Girona for a predoctoral grant and R. Gonzalez-Olmos thanks MICINN for the Juan de la Cierva fellowship (JCI-2010-07104)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adsorption of volatile sulphur compounds onto modified activated carbons: effect of oxygen functional groups

  • Vega Martínez, Esther
  • Lemus, Jesús
  • Anfruns Bagaria, Alba
  • González Olmos, Rafael
  • Palomar, José
  • Martín, María José
The effect of physical and chemical properties of activated carbon (AC) on the adsorption of ethyl mercaptan, dimethyl sulphide and dimethyl disulphide was investigated by treating a commercial AC with nitric acid and ozone. The chemical properties of ACs were characterised by temperature programme desorption and X-ray photoelectron spectroscopy. AC treated with nitric acid presented a larger amount of oxygen functional groups than materials oxidised with ozone. This enrichment allowed a significant improvement on adsorption capacities for ethyl mercaptan and dimethyl sulphide but not for dimethyl disulphide. In order to gain a deeper knowledge on the effect of the surface chemistry of AC on the adsorption of volatile sulphur compounds, the quantum-chemical COSMO-RS method was used to simulate the interactions between AC surface groups and the studied volatile sulphur compounds. In agreement with experimental data, this model predicted a greater affinity of dimethyl disulphide towards AC, unaffected by the incorporation of oxygen functional groups in the surface. Moreover, the model pointed out to an increase of the adsorption capacity of AC by the incorporation of hydroxyl functional groups in the case of ethyl mercaptan and dimethyl sulphide due to the hydrogen bond interactions, R. Gonzalez Olmos thanks MICINN for the Juan de la Cierva fellowship (JCI-2010-07104). We also greatly appreciate financial support from the Spanish "Ministerio de Ciencia e Innovacion (MICINN)" and "Comunidad de Madrid" (projects PET2008_0261, CTQ2011-24114, CTQ2011-26758, CTQ2009-09983 and S2009/PPQ-1545) and "Centro de Computacion Cientifica de la Universidad Autonoma de Madrid" for computational facilities
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

H2O2-based oxidation processes for the regeneration of activated carbons saturated with volatile organic compounds of different polarity

  • Anfruns Bagaria, Alba
  • Montes Morán, Miguel A.
  • González Olmos, Rafael
  • Martín, María José
This study reports the sequential regeneration treatment of activated carbons (ACs) saturated with volatile organic compounds (VOCs) of different polarity using H2O2 as oxidizing agent. In this process, VOCs were adsorbed onto the AC and further oxidized by H2O2. A commercial AC was selected and saturated with three different VOCs: two non-polar and hydrophobic VOCs, toluene and limonene, and one polar and hydrophilic VOC, methyl ethyl ketone (MEK). The saturated AC was regenerated with H2O2, and the Fenton reagent for comparison. It was found that regeneration efficiencies obtained with the H2O2 treatment were equal to or even higher than those obtained with the Fenton treatment. The fate of the pre-adsorbed VOCs, once the regeneration process is completed was studied. It was found that this regeneration treatment is limited for non-polar VOCs such as toluene and limonene, as they tend to remain adsorbed onto the ACs after regeneration treatment. Contrarily, MEK tend to be transferred to the bulk phase and react with the generated oxidant species, This work was funded by MICINN (CTQ2008-06869, CTQ2011-24114 and CONSOLIDER Project CSD-2007-0055). A. Anfruns thanks University of Girona for a predoctoral grant and R. Gonzalez-Olmos thanks MICINN for the Juan de la Cierva fellowship (JCI-2010-07104)