Pasar al contenido principal

INTEGRACION DE PROCESOS DE MEMBRANAS, INTERCAMBIO IONICO Y PRECIPITACION QUIMICA EN LA VALORIZACION DE CONCENTRADOS DE TRATAMIENTOS DE DESALACION DE AGUA

CTQ2011-26799

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhancing the efficiency of solar pond heat extraction by using both lateral and bottom heat exchangers

  • Alcaraz Segura, Aurora
  • Valderrama Ángel, César Alberto|||0000-0001-6711-8183
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
  • Akbarzadeh, Aliakbar
  • Farran Marsà, Adriana|||0000-0002-7837-0867
In this study, heat extraction from both the gradient and heat storage zones of a salinity-gradient solar pond (SGSP) has been evaluated. For this purpose, an experimental solar pond pilot plant was constructed in 2009 in Barcelona (Spain). The structure of the pond is a cylindrical tank of 3-m height and 8 m diameter with a total area of 50 m(2). The main objective was to evaluate a heat-extraction system from the SGSP designed to enhance the system efficiency under different conditions. Thus, an in-pond heat exchanger covering all of the lateral wall area of the pond was installed, and its performance was compared with the traditional in-pond heat exchanger situated on the bottom of the pond. Heat extraction experiments were performed using both heat exchangers individually or both at the same time. The study covers the experiments performed at three different seasonal temperature conditions: winter (December), summer (July) and autumn (October and November). The variations of the temperature inside the pond during the heat extraction were measured and analyzed. The results demonstrated that the efficiency of the pond increases when the heat is removed from the lateral heat exchanger alone compared to either using the bottom heat exchanger or using both heat exchangers simultaneously
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Trace ions rejection tunning in NF by selecting solution composition: Ion permeances estimation

  • Pagès Hernando, Neus|||0000-0002-0418-8122
  • Reig i Amat, Mònica|||0000-0003-0225-2466
  • Gibert Agulló, Oriol|||0000-0002-7313-5147
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Nanofiltration (NF) is suggested to selectively remove ionic species in aqueous process streams taking benefit of both membrane and aqueous solution composition. The importance of predicting and optimizing selective ion rejections by NF not only of major compounds (e.g. NaCl, Na2SO4, MgCl2, MgSO4) but also of minor ones such as ammonium (NH4+), nitrate (NO3-), bromide (Br-), iodide (I-) typically present in natural and industrial process streams is crucial. The current work explores ion rejection patterns and membrane ion permeances using the phenomenological Solution-Electro-Diffusion-Film (SEDF) model. It makes possible rapid calculations that account for the effects of spontaneously arising electric fields on rejections. Experimental ion rejection data of several inorganic ions species at various transmembrane pressures and at fixed cross-flow velocity have been obtained with NF270 membrane. A number of trace ions (Na+, K+, Cl-, Ca2+, Mg2+, SO42-, NO3-, NH4+, Br-and I-) have been used in combination with various dominant salts (NaCl, MgCl2, MgSO4) as model feed solutions. Results showed that dominant salts were moderately (NaCl) and highly (MgCl2, MgSO4) rejected when some ions are divalent, while trace ions exhibited quite variable rejection, including negative ones mainly at low transmembrane volume flows. The electric field of membrane potential can accelerate or retard the ion flows to the permeate, so negative or unexpectedly high rejections could be observed. Ions transport was shown to be affected by the membrane chemistry (e.g. acid-base properties of the un-crosslinked carboxylic and amine groups) and the dielectric exclusion phenomena. From the modelling procedure, ionic membrane permeances were determined for various multi-ion systems studied. Results showed that nature of dominant salt composition can be used to control the rejection of minor components., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Synthesis of a monovalent selective cation exchange membrane to concentrate reverse osmosis brines by electrodialysis

  • Reig i Amat, Mònica|||0000-0003-0225-2466
  • Farrokhzad, Hasan
  • Van der Bruggen, Bart
  • Gibert Agulló, Oriol|||0000-0002-7313-5147
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
In this work, novel monovalent selective cation exchange membranes (CEMs) with different mixtures of polyvinylidene fluoride (PVDF) and sulfonated PVDF (S-PVDF) were synthesized. The selected composite membranes were modified by surface polymerization of polyaniline (PANi) to improve their monovalent cation selectivity. PANi was doped with p-toluene sulfonic acid (pTSA) or L-valine (2-amino-3-methylbutanoic acid) and the selectivity of each CEM was determined. Membrane properties, such as chemical composition, water uptake, ion exchange capacity, permselectivity, contact angle and crystallinity were measured. The influence of the applied voltage was also studied. The newly developed membranes were used for electrodialytic concentration of NaCl from synthetic reverse osmosis (RO) brine. Doped membranes with pTSA (S-Na(Mg) = 0.13, S-Na(Ca) = 3.59) and valine (S-Na(Mg) = 0.09, S-Na(Ca) = 0.8) have a higher selectivity for sodium than the composite ones (S-Na(Mg) = 0.63, S-Na(Ca) = 6.82). Moreover, the increase of applied voltage results in an increase of the selectivity for monovalent ions. (C) 2015 Elsevier B.V. All rights reserved.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Trace ions rejection tunning in NF by selecting solution composition: Ion permeances estimation

  • Pagès Hernando, Neus
  • Reig i Amat, Mònica
  • Gibert Agulló, Oriol
  • Cortina Pallás, José Luis
Nanofiltration (NF) is suggested to selectively remove ionic species in aqueous process streams taking benefit of both membrane and aqueous solution composition. The importance of predicting and optimizing selective ion rejections by NF not only of major compounds (e.g. NaCl, Na2SO4, MgCl2, MgSO4) but also of minor ones such as ammonium (NH4+), nitrate (NO3-), bromide (Br-), iodide (I-) typically present in natural and industrial process streams is crucial. The current work explores ion rejection patterns and membrane ion permeances using the phenomenological Solution-Electro-Diffusion-Film (SEDF) model. It makes possible rapid calculations that account for the effects of spontaneously arising electric fields on rejections. Experimental ion rejection data of several inorganic ions species at various transmembrane pressures and at fixed cross-flow velocity have been obtained with NF270 membrane. A number of trace ions (Na+, K+, Cl-, Ca2+, Mg2+, SO42-, NO3-, NH4+, Br-and I-) have been used in combination with various dominant salts (NaCl, MgCl2, MgSO4) as model feed solutions. Results showed that dominant salts were moderately (NaCl) and highly (MgCl2, MgSO4) rejected when some ions are divalent, while trace ions exhibited quite variable rejection, including negative ones mainly at low transmembrane volume flows. The electric field of membrane potential can accelerate or retard the ion flows to the permeate, so negative or unexpectedly high rejections could be observed. Ions transport was shown to be affected by the membrane chemistry (e.g. acid-base properties of the un-crosslinked carboxylic and amine groups) and the dielectric exclusion phenomena. From the modelling procedure, ionic membrane permeances were determined for various multi-ion systems studied. Results showed that nature of dominant salt composition can be used to control the rejection of minor components., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancing the efficiency of solar pond heat extraction by using both lateral and bottom heat exchangers

  • Alcaraz Segura, Aurora
  • Valderrama Ángel, César Alberto
  • Cortina Pallás, José Luis
  • Akbarzadeh, Aliakbar
  • Farran Marsà, Adriana
In this study, heat extraction from both the gradient and heat storage zones of a salinity-gradient solar pond (SGSP) has been evaluated. For this purpose, an experimental solar pond pilot plant was constructed in 2009 in Barcelona (Spain). The structure of the pond is a cylindrical tank of 3-m height and 8 m diameter with a total area of 50 m(2). The main objective was to evaluate a heat-extraction system from the SGSP designed to enhance the system efficiency under different conditions. Thus, an in-pond heat exchanger covering all of the lateral wall area of the pond was installed, and its performance was compared with the traditional in-pond heat exchanger situated on the bottom of the pond. Heat extraction experiments were performed using both heat exchangers individually or both at the same time. The study covers the experiments performed at three different seasonal temperature conditions: winter (December), summer (July) and autumn (October and November). The variations of the temperature inside the pond during the heat extraction were measured and analyzed. The results demonstrated that the efficiency of the pond increases when the heat is removed from the lateral heat exchanger alone compared to either using the bottom heat exchanger or using both heat exchangers simultaneously, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Synthesis of a monovalent selective cation exchange membrane to concentrate reverse osmosis brines by electrodialysis

  • Reig i Amat, Mònica
  • Farrokhzad, Hasan
  • Van der Bruggen, Bart
  • Gibert Agulló, Oriol
  • Cortina Pallás, José Luis
In this work, novel monovalent selective cation exchange membranes (CEMs) with different mixtures of polyvinylidene fluoride (PVDF) and sulfonated PVDF (S-PVDF) were synthesized. The selected composite membranes were modified by surface polymerization of polyaniline (PANi) to improve their monovalent cation selectivity. PANi was doped with p-toluene sulfonic acid (pTSA) or L-valine (2-amino-3-methylbutanoic acid) and the selectivity of each CEM was determined. Membrane properties, such as chemical composition, water uptake, ion exchange capacity, permselectivity, contact angle and crystallinity were measured. The influence of the applied voltage was also studied. The newly developed membranes were used for electrodialytic concentration of NaCl from synthetic reverse osmosis (RO) brine. Doped membranes with pTSA (S-Na(Mg) = 0.13, S-Na(Ca) = 3.59) and valine (S-Na(Mg) = 0.09, S-Na(Ca) = 0.8) have a higher selectivity for sodium than the composite ones (S-Na(Mg) = 0.63, S-Na(Ca) = 6.82). Moreover, the increase of applied voltage results in an increase of the selectivity for monovalent ions. (C) 2015 Elsevier B.V. All rights reserved., Postprint (author's final draft)