Pasar al contenido principal

CATALIZADORES NANOESTRUCTURADOS BASADOS EN METALES NO NOBLES PARA LA PRODUCCION DE HIDROGENO LIBRE DE CO A PARTIR DE ETANOL

CTQ2012-32928

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diffusion Barriers Block Defect Occupation on Reduced CeO2 (111)

  • Lustemberg, Pablo G.
  • Pan, Y.
  • Shaw, B.J.
  • Grinter, D.
  • Pang, Chi
  • Thornton, G.
  • Pérez, Rubén
  • Ganduglia-Pirovano, M. V.
  • Nilius, N.
[EN] Surface defects are believed to govern the adsorption behavior of reducible oxides. We challenge this perception on the basis of a combined scanning-tunneling-microscopy and density-functional-theory study, addressing the Au adsorption on reduced CeO2-x(111). Despite a clear thermodynamic preference for oxygen vacancies, individual Au atoms were found to bind mostly to regular surface sites. Even at an elevated temperature, aggregation at step edges and not decoration of defects turned out to be the main consequence of adatom diffusion. Our findings are explained with the polaronic nature of the Au-ceria system, which imprints a strong diabatic character onto the diffusive motion of adatoms. Diabatic barriers are generally higher than those in the adiabatic regime, especially if the hopping step couples to an electron transfer into the ad-gold. As the population of O vacancies always requires a charge exchange, defect decoration by Au atoms becomes kinetically hindered. Our study demonstrates that polaronic effects determine not only electron transport in reducible oxides but also the adsorption characteristics and therewith the surface chemistry., Support from the COST Action CM1104 is acknowledged. P. G. L. thanks CONICET for a postdoctoral fellowship and funding (PIP No. 272). G. T. announces support from the ERC AdV Grant ‘EnergySurf’, the EPSRC and the Royal Society. R. P. and M. V. G. P. thank the Spanish MINECO (Projects No. CTQ2012-32928, No. CTQ2015-71823-R, No. MAT2014-54484-P, and No. MDM-2014-0377);
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization and catalytic properties of CuO/CeO2/MgAl2O4 for preferential oxidation of CO in H2-rich streams

  • Elmhamdi, A.
  • Castañeda, R.
  • Kubacka, Anna
  • Pascual, Laura
  • Nahdi, K.
  • Martínez-Arias, Arturo
Catalysts of copper (1 wt.%) supported on a CeO2/MgAl2O4mixed support have been prepared by usingdifferent pH values (pH ∼ 4, 8 and 10) in the impregnating solution of copper with the aim of favoringdifferent situations of interaction between copper and the two support components. The catalysts havebeen characterized in detail by XRD, SBETmeasurement, HREM and associated techniques, XPS, H2-TPRand EPR which allows establishing a model of structural characteristics of the catalysts. The characteriza-tion results have been correlated with analysis of the catalytic properties of the samples for preferentialoxidation of CO in a H2-rich stream (CO-PROX) complemented by operando-DRIFTS. Important struc-tural/chemical/catalytic differences as a function of the pH of the impregnating solution are revealed.These are explained on the basis of the characteristics of the interfaces formed between the differentcomponents present in each catalyst which basically determine the catalytic properties in each case.© 2016 Elsevier B.V. All rights reserved.1. IntroductionProduction of H2for polymer fuel cells (PEMFC) is usuallyaccomplished by a multi-step process that includes catalyticreforming of hydrocarbons or oxygenated hydrocarbons followedby water–gas shift (WGS) [1,2]. However, PEMFCs require hydrogenfeed that is mostly free from CO, as otherwise the Pt based anodecatalyst would be deactivated rapidly [2,3]. The high concentrationof CO is brought down to less than 0.5 mol.%, through a two-stagewater gas shift (WGS) reactor, in which CO is reacted with waterto produce hydrogen and carbon dioxide [4]. Since the CO level isstill much higher than a PEMFC anode can tolerate [4], it has tobe selectively oxidized to bring its concentration to very low level(typically below 100 ppm) in excess of H2(and with the presenceof H2O and CO2in the feed), which is a current challenge in hetero-geneous catalysis. Among different possibilities in this sense, thecatalytic preferential oxidation of CO (CO-PROX) is considered asmost simple and effective process to attain such goal [5–7].∗Corresponding author.E-mail address: amartinez@icp.csic.es (A. Martínez-Arias).The catalysts for CO-PROX reported in the scientific literaturecan be basically classified into three types: (i) noble metal cata-lysts based on Pt, Pd, Rh or Ir typically supported on Al2O3, SiO2orzeolites [6,7,8–17]; (ii) gold catalysts supported on different oxideslike MnOx, FeOx, TiO2, Al2O3, NiO, MgO and SnO2[6,7,18–21]; (iii)several kinds of base metal oxide catalysts, such as the oxides ofCu, Mn, Co, Ni and Fe, either alone or in combination with otheroxides [6,7,22–25]. Among the latter, catalysts combining copperand cerium oxides have demonstrated an important potential forthe process, being able to compete with less economically interest-ing noble metal catalysts; in particular, they generally show higherselectivity at full CO conversion than catalysts based on platinum-group metals and they appear more resistant to the presence ofCO2than catalysts based on gold [6,7,26]. The particular ability ofcopper-ceria catalysts for the CO-PROX process has been essentiallyattributed to the synergistic redox properties produced upon for-mation of copper oxide-ceria interfacial sites, which are consideredto constitute the active sites for the CO oxidation reaction [27–31].Further than the simple combination of copper and ceriumoxides, it is interesting from a practical point of view to explore theproperties of this type of catalysts when supported onto anotherfunctional material. Typically Al2O3, TiO2, MgAl2O4or SiO2areemployed as supports for oxidation catalysts due to their high ther- http://dx., AcknowledgementsThanks are due to Ms. C.L. Bolívar-Díaz for the help provided dur-ing some of the catalytic activity measurements. Thanks are alsodue to ICP-CSIC Unidad de Apoyo for the measurement of a partof the characterization results presented. This work was fundedby the Ministerio de Economía y Competitividad (Plan NacionalProject CTQ2012-32928). Support from EU COST CM1104 actionis also acknowledged., Peer reviewed