Pasar al contenido principal

METODOLOGIAS PARA EL DISEÑO AVANZADO DE PROCESOS QUIMICOS SOSTENIBLES: OPTIMIZACION, INTENSIFICACION; EFICIENCIA ENERGETICA Y SOSTENIBILIDAD.

CTQ2012-37039-C02-02

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2012
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Secretaría de Estado de Investigación, Desarrollo e Innovación
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Isobutane Alkylation Process Synthesis by means of Hybrid Simulation-Multiobjective Optimization

  • Fernandez-Torres, Maria J.
  • García, Norberto
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Fernandez-Torres, Maria J.|||/items/2b3ad269-4874-42dc-9d1b-ea5820732923
Multiobjective Generalized Disjunctive Programming (MO-GDP) optimization has been used for the synthesis of an important industrial process, isobutane alkylation. The two objective functions to be simultaneously optimized are the environmental impact, determined by means of LCA (Life Cycle Assessment), and the economic potential of the process. The main reason for including the minimization of the environmental impact in the optimization process is the widespread environmental concern by the general public. For the resolution of the problem we employed a hybrid simulation- optimization methodology, i.e., the superstructure of the process was developed directly in a chemical process simulator connected to a state of the art optimizer. The model was formulated as a GDP and solved using a logic algorithm that avoids the reformulation as MINLP -Mixed Integer Non Linear Programming-. Our research gave us Pareto curves compounded by three different configurations where the LCA has been assessed by two different parameters: global warming potential and ecoindicator-99.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimal synthesis of thermally coupled distillation sequences using a novel MILP approach

  • Caballero, José A.
  • Grossmann, Ignacio E.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
This paper introduces a novel MILP approach for the design of distillation columns sequences of zeotropic mixtures that explicitly include from conventional to fully thermally coupled sequences and divided wall columns with a single wall. The model is based on the use of two superstructure levels. In the upper level a superstructure that includes all the basic sequences of separation tasks is postulated. The lower level is an extended tree that explicitly includes different thermal states and compositions of the feed to a given separation task. In that way, it is possible to a priori optimize all the possible separation tasks involved in the superstructure. A set of logical relationships relates the feasible sequences with the optimized tasks in the extended tree resulting in a MILP to select the optimal sequence. The performance of the model in terms of robustness and computational time is illustrated with several examples.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimization of Chemical Processes Using Surrogate Models Based on a Kriging Interpolation

  • Quirante, Natalia
  • Javaloyes-Antón, Juan
  • Ruiz-Femenia, Rubén
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Javaloyes-Antón, Juan|||/items/c9d90877-113a-438e-81b5-6b6ff8fb9575
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
Superstructure approaches are the solution to the difficult problem which involves the rigorous economic design of a distillation column. These methods require complex initialization procedures and they are hard to solve. For this reason, these methods have not been extensively used. In this work, we present a methodology for the rigorous optimization of chemical processes implemented on a commercial simulator using surrogate models based on a kriging interpolation. Several examples were studied, but in this paper, we perform the optimization of a superstructure for a non-sharp separation to show the efficiency and effectiveness of the method. Noteworthy that it is possible to get surrogate models accurate enough with up to seven degrees of freedom.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Integration of modular process simulators under the Generalized Disjunctive Programming framework for the structural flowsheet optimization

  • Navarro Amorós, Miguel Ángel
  • Ruiz-Femenia, Rubén
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
The optimization of chemical processes where the flowsheet topology is not kept fixed is a challenging discrete-continuous optimization problem. Usually, this task has been performed through equation based models. This approach presents several problems, as tedious and complicated component properties estimation or the handling of huge problems (with thousands of equations and variables). We propose a GDP approach as an alternative to the MINLP models coupled with a flowsheet program. The novelty of this approach relies on using a commercial modular process simulator where the superstructure is drawn directly on the graphical use interface of the simulator. This methodology takes advantage of modular process simulators (specially tailored numerical methods, reliability, and robustness) and the flexibility of the GDP formulation for the modeling and solution. The optimization tool proposed is successfully applied to the synthesis of a methanol plant where different alternatives are available for the streams, equipment and process conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Simultaneous environmental and economic process synthesis of Isobutane Alkylation

  • García, Norberto
  • Fernandez-Torres, Maria J.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Fernandez-Torres, Maria J.|||/items/2b3ad269-4874-42dc-9d1b-ea5820732923
This multidisciplinary study concerns the optimal design of processes with a view to both maximizing profit and minimizing environmental impacts. This can be achieved by a combination of traditional chemical process design methods, measurements of environmental impacts and advanced mathematical optimization techniques. More to the point, this paper presents a hybrid simulation-multiobjective optimization approach that at once optimizes the production cost and minimizes the associated environmental impacts of isobutane alkylation. This approach has also made it possible to obtain the flowsheet configurations and process variables that are needed to manufacture isooctane in a way that satisfies the above-stated double aim. The problem is formulated as a Generalized Disjunctive Programming problem and solved using state-of-the-art logic-based algorithms. It is shown, starting from existing alternatives for the process, that it is possible to systematically generate a superstructure that includes alternatives not previously considered. The optimal solution, in the form a Pareto curve, includes different structural alternatives from which the most suitable design can be selected. To evaluate the environmental impact, Life Cycle Assessment based on two different indicators is employed: Ecoindicator 99 and Global Warming Potential.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Simultaneous synthesis of work exchange networks with heat integration

  • Onishi, Viviani C.
  • Ravagnani, Mauro A.S.S.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
The optimal integration of work and its interaction with heat can represent large energy savings in industrial plants. This paper introduces a new optimization model for the simultaneous synthesis of work exchange networks (WENs), with heat integration for the optimal pressure recovery of process gaseous streams. The proposed approach for the WEN synthesis is analogous to the well-known problem of synthesis of heat exchanger networks (HENs). Thus, there is work exchange between high-pressure (HP) and low-pressure (LP) streams, achieved by pressure manipulation equipment running on common axes. The model allows the use of several units of single-shaft-turbine-compressor (SSTC), as well as stand-alone compressors, turbines and valves. Helper motors and generators are used to respond to any demand and excess of energy. Moreover, between the WEN stages the streams are sent to the HEN to promote thermal recovery, aiming to enhance the work integration. A multi-stage superstructure is proposed to represent the process. The WEN superstructure is optimized in a mixed-integer nonlinear programming (MINLP) formulation and solved with the GAMS software, with the goal of minimizing the total annualized cost. Three examples are conducted to verify the accuracy of the proposed method. In all case studies, the heat integration between WEN stages is essential to improve the pressure recovery, and to reduce the total costs involved in the process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Handling of Uncertainty in Life Cycle Inventory by Correlated Multivariate Lognormal Distributions: Application to the Design of Supply Chain Networks

  • Labarta, Juan A.
  • Salcedo Díaz, Raquel
  • Ruiz-Femenia, Rubén
  • Guillén Gosálbez, Gonzalo
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
In this work, we analyze the effect of incorporating life cycle inventory (LCI) uncertainty on the multi-objective optimization of chemical supply chains (SC) considering simultaneously their economic and environmental performance. To this end, we present a stochastic multi-scenario mixed-integer linear programming (MILP) coupled with a two-step transformation scenario generation algorithm with the unique feature of providing scenarios where the LCI random variables are correlated and each one of them has the desired lognormal marginal distribution. The environmental performance is quantified following life cycle assessment (LCA) principles, which are represented in the model formulation through standard algebraic equations. The capabilities of our approach are illustrated through a case study of a petrochemical supply chain. We show that the stochastic solution improves the economic performance of the SC in comparison with the deterministic one at any level of the environmental impact, and moreover the correlation among environmental burdens provides more realistic scenarios for the decision making process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Logic-Based Outer Approximation for the Design of Discrete-Continuous Dynamic Systems with Implicit Discontinuities

  • Ruiz-Femenia, Rubén
  • Caballero, José A.
  • Grossmann, Ignacio E.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
We address the optimization of discrete-continuous dynamic optimization problems using a disjunctive multistage modeling framework, with implicit discontinuities, which increases the problem complexity since the number of continuous phases and discrete events is not known a-priori. After setting a fixed alternative sequence of modes, we convert the infinite-dimensional continuous mixed-logic dynamic (MLDO) problem into a finite dimensional discretized GDP problem by orthogonal collocation on finite elements. We use the Logic-based Outer Approximation algorithm to fully exploit the structure of the GDP representation of the problem. This modelling framework is illustrated with an optimization problem with implicit discontinuities (diver problem).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Handling of Uncertainty in Life Cycle Inventory by Correlated Multivariate Lognormal Distributions: Application to the Design of Supply Chain Networks

  • Labarta, Juan A.
  • Salcedo Díaz, Raquel
  • Ruiz-Femenia, Rubén
  • Guillén Gosálbez, Gonzalo
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
In this work, we analyze the effect of incorporating life cycle inventory (LCI) uncertainty on the multi-objective optimization of chemical supply chains (SC) considering simultaneously their economic and environmental performance. To this end, we present a stochastic multi-scenario mixed-integer linear programming (MILP) coupled with a two-step transformation scenario generation algorithm with the unique feature of providing scenarios where the LCI random variables are correlated and each one of them has the desired lognormal marginal distribution. The environmental performance is quantified following life cycle assessment (LCA) principles, which are represented in the model formulation through standard algebraic equations. The capabilities of our approach are illustrated through a case study of a petrochemical supply chain. We show that the stochastic solution improves the economic performance of the SC in comparison with the deterministic one at any level of the environmental impact, and moreover the correlation among environmental burdens provides more realistic scenarios for the decision making process.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Simultaneous synthesis of heat exchanger networks with pressure recovery: optimal integration between heat and work

  • Onishi, Viviani C.
  • Ravagnani, Mauro A.S.S.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
The optimal integration between heat and work may significantly reduce the energy demand and consequently the process cost. This paper introduces a new mathematical model for the simultaneous synthesis of heat exchanger networks (HENs) in which the pressure levels of the process streams can be adjusted to enhance the heat integration. A superstructure is proposed for the HEN design with pressure recovery, developed via generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP) formulation. The process conditions (stream temperature and pressure) must be optimized. Furthermore, the approach allows for coupling of the turbines and compressors and selection of the turbines and valves to minimize the total annualized cost, which consists of the operational and capital expenses. The model is tested for its applicability in three case studies, including a cryogenic application. The results indicate that the energy integration reduces the quantity of utilities required, thus decreasing the overall cost.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

MINLP Optimization Algorithm for the Synthesis of Heat and Work Exchange Networks

  • Onishi, Viviani C.
  • Ravagnani, Mauro A.S.S.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
This paper introduces a new optimization model for the simultaneous synthesis of heat and work exchange networks. The work integration is performed in the work exchange network (WEN), while the heat integration is carried out in the heat exchanger network (HEN). In the WEN synthesis, streams at high-pressure (HP) and low-pressure (LP) are subjected to pressure manipulation stages, via turbines and compressors running on common shafts and stand-alone equipment. The model allows the use of several units of single-shaft-turbine-compressor (SSTC), as well as helper motors and generators to respond to any shortage and/or excess of energy, respectively, in the SSTC axes. The heat integration of the streams occurs in the HEN between each WEN stage. Thus, as the inlet and outlet streams temperatures in the HEN are dependent of the WEN design, they must be considered as optimization variables. The proposed multi-stage superstructure is formulated in mixed-integer nonlinear programming (MINLP), in order to minimize the total annualized cost composed by capital and operational expenses. A case study is conducted to verify the accuracy of the proposed approach. The results indicate that the heat integration between the WEN stages is essential to enhance the work integration, and to reduce the total cost of process due the need of a smaller amount of hot and cold utilities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A Sequential Algorithm for the Rigorous Design of Thermally Coupled Distillation Sequences

  • Caballero, José A.
  • Labarta, Juan A.
  • Grossmann, Ignacio E.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
A sequential design method is presented for the design of thermally coupled distillation sequences. The algorithm starts by selecting a set of sequences in the space of basic configurations in which the internal structure of condensers and reboilers is explicitly taken into account and extended with the possibility of including divided wall columns (DWC). This first stage is based on separation tasks (except by the DWCs) and therefore it does not provide an actual sequence of columns. In the second stage the best arrangement in N-1 actual columns is performed taking into account operability and mechanical constraints. Finally, for a set of candidate sequences the algorithm try to reduce the number of total columns by considering Kaibel columns, elimination of transfer blocks or columns with vertical partitions. An example illustrate the different steps of the sequential algorithm.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

An alternative disjunctive optimization model for heat integration with variable temperatures

  • Navarro Amorós, Miguel Ángel
  • Caballero, José A.
  • Ruiz-Femenia, Rubén
  • Grossmann, Ignacio E.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
This paper presents an alternative model to deal with the problem of optimal energy consumption minimization of non-isothermal systems with variable inlet and outlet temperatures. The model is based on an implicit temperature ordering and the “transshipment model” proposed by Papoulias and Grossmann (1983). It is supplemented with a set of logical relationships related to the relative position of the inlet temperatures of process streams and the dynamic temperature intervals. In the extreme situation of fixed inlet and outlet temperatures, the model reduces to the “transshipment model”. Several examples with fixed and variable temperatures are presented to illustrate the model's performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Logic-Based Outer-Approximation Algorithm for Solving Discrete-Continuous Dynamic Optimization Problems

  • Ruiz-Femenia, Rubén
  • Flores-Tlacuahuac, Antonio
  • Grossmann, Ignacio E.
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
We present an extension of the logic outer-approximation algorithm for dealing with disjunctive discrete-continuous optimal control problems whose dynamic behavior is modeled in terms of differential-algebraic equations. Although the proposed algorithm can be applied to a wide variety of discrete-continuous optimal control problems, we are mainly interested in problems where disjunctions are also present. Disjunctions are included to take into account only certain parts of the underlying model which become relevant under some processing conditions. By doing so the numerical robustness of the optimization algorithm improves since those parts of the model that are not active are discarded leading to a reduced size problem and avoiding potential model singularities. We test the proposed algorithm using three examples of different complex dynamic behavior. In all the case studies the number of iterations and the computational effort required to obtain the optimal solutions is modest and the solutions are relatively easy to find.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Mathematical Programming Approach for the Design of Intensified Thermally Coupled Distillation Sequences

  • Caballero, José A.
  • Labarta, Juan A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
In this work we present a methodology that transform insights from the conceptual design of intensified thermally coupled distillation in a set of logical expressions and mathematical models that can be integrated in a mathematical programming environment with the objective of systematically generate column sequences with a reduced number of actual columns (lower than N-1 columns, where N is the number of components). Some of the alternatives considered are Divided Wall Columns (DWC); Columns with vertical partitions, Kaibel like configurations, Elimination of transfer blocks, Extended DWC (including columns with vertical partitions) with external liquid transfer. The combination of all these alternatives provides a new rich space of alternatives, some of them not known before that should be taken into account in the design of distillation based separation systems. Some examples illustrate the procedure.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rigorous design of distillation columns using surrogate models based on Kriging interpolation

  • Quirante, Natalia
  • Javaloyes-Antón, Juan
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Javaloyes-Antón, Juan|||/items/c9d90877-113a-438e-81b5-6b6ff8fb9575
The economic design of a distillation column or distillation sequences is a challenging problem that has been addressed by superstructure approaches. However, these methods have not been widely used because they lead to mixed-integer nonlinear programs that are hard to solve, and require complex initialization procedures. In this article, we propose to address this challenging problem by substituting the distillation columns by Kriging-based surrogate models generated via state of the art distillation models. We study different columns with increasing difficulty, and show that it is possible to get accurate Kriging-based surrogate models. The optimization strategy ensures that convergence to a local optimum is guaranteed for numerical noise-free models. For distillation columns (slightly noisy systems), Karush–Kuhn–Tucker optimality conditions cannot be tested directly on the actual model, but still we can guarantee a local minimum in a trust region of the surrogate model that contains the actual local minimum.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Retrofit of heat exchanger networks with pressure recovery of process streams at sub-ambient conditions

  • Onishi, Viviani C.
  • Ravagnani, Mauro A.S.S.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
This paper presents a new mathematical programming model for the retrofit of heat exchanger networks (HENs), wherein the pressure recovery of process streams is conducted to enhance heat integration. Particularly applied to cryogenic processes, HENs retrofit with combined heat and work integration is mainly aimed at reducing the use of expensive cold services. The proposed multi-stage superstructure allows the increment of the existing heat transfer area, as well as the use of new equipment for both heat exchange and pressure manipulation. The pressure recovery of streams is carried out simultaneously with the HEN design, such that the process conditions (streams pressure and temperature) are variables of optimization. The mathematical model is formulated using generalized disjunctive programming (GDP) and is optimized via mixed-integer nonlinear programming (MINLP), through the minimization of the retrofit total annualized cost, considering the turbine and compressor coupling with a helper motor. Three case studies are performed to assess the accuracy of the developed approach, including a real industrial example related to liquefied natural gas (LNG) production. The results show that the pressure recovery of streams is efficient for energy savings and, consequently, for decreasing the HEN retrofit total cost especially in sub-ambient processes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Integration of different models in the design of chemical processes: Application to the design of a power plant

  • Caballero, José A.
  • Navarro Amorós, Miguel Ángel
  • Ruiz-Femenia, Rubén
  • Grossmann, Ignacio E.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
With advances in the synthesis and design of chemical processes there is an increasing need for more complex mathematical models with which to screen the alternatives that constitute accurate and reliable process models. Despite the wide availability of sophisticated tools for simulation, optimization and synthesis of chemical processes, the user is frequently interested in using the ‘best available model’. However, in practice, these models are usually little more than a black box with a rigid input–output structure. In this paper we propose to tackle all these models using generalized disjunctive programming to capture the numerical characteristics of each model (in equation form, modular, noisy, etc.) and to deal with each of them according to their individual characteristics. The result is a hybrid modular–equation based approach that allows synthesizing complex processes using different models in a robust and reliable way. The capabilities of the proposed approach are discussed with a case study: the design of a utility system power plant that has been decomposed into its constitutive elements, each treated differently numerically. And finally, numerical results and conclusions are presented.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

MINLP Model for the Synthesis of Heat Exchanger Networks with Handling Pressure of Process Streams

  • Onishi, Viviani C.
  • Ravagnani, Mauro A.S.S.
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
This paper introduces a new mathematical model for the simultaneous synthesis of heat exchanger networks (HENs), wherein the handling pressure of process streams is used to enhance the heat integration. The proposed approach combines generalized disjunctive programming (GDP) and mixed-integer nonlinear programming (MINLP) formulation, in order to minimize the total annualized cost composed by operational and capital expenses. A multi-stage superstructure is developed for the HEN synthesis, assuming constant heat capacity flow rates and isothermal mixing, and allowing for streams splits. In this model, the pressure and temperature of streams must be treated as optimization variables, increasing further the complexity and difficulty to solve the problem. In addition, the model allows for coupling of compressors and turbines to save energy. A case study is performed to verify the accuracy of the proposed model. In this example, the optimal integration between the heat and work decreases the need for thermal utilities in the HEN design. As a result, the total annualized cost is also reduced due to the decrease in the operational expenses related to the heating and cooling of the streams.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Logic hybrid simulation-optimization algorithm for distillation design

  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
In this paper, we propose a novel algorithm for the rigorous design of distillation columns that integrates a process simulator in a generalized disjunctive programming formulation. The optimal distillation column, or column sequence, is obtained by selecting, for each column section, among a set of column sections with different number of theoretical trays. The selection of thermodynamic models, properties estimation etc., are all in the simulation environment. All the numerical issues related to the convergence of distillation columns (or column sections) are also maintained in the simulation environment. The model is formulated as a Generalized Disjunctive Programming (GDP) problem and solved using the logic based outer approximation algorithm without MINLP reformulation. Some examples involving from a single column to thermally coupled sequence or extractive distillation shows the performance of the new algorithm.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Large scale optimization of a sour water stripping plant using surrogate models

  • Quirante, Natalia
  • Caballero, José A.
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
In this work, we propose a new methodology for the large scale optimization and process integration of complex chemical processes that have been simulated using modular chemical process simulators. Units with significant numerical noise or large CPU times are substituted by surrogate models based on Kriging interpolation. Using a degree of freedom analysis, some of those units can be aggregated into a single unit to reduce the complexity of the resulting model. As a result, we solve a hybrid simulation-optimization model formed by units in the original flowsheet, Kriging models, and explicit equations. We present a case study of the optimization of a sour water stripping plant in which we simultaneously consider economics, heat integration and environmental impact using the ReCiPe indicator, which incorporates the recent advances made in Life Cycle Assessment (LCA). The optimization strategy guarantees the convergence to a local optimum inside the tolerance of the numerical noise.