Pasar al contenido principal

DESARROLLO DE NUEVOS MATERIALES CATALITICOS PARA LA VALORIZACION ELECTROQUIMICA DE CO2

CTQ2013-48280-C3-3-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Generator-collector Voltammetry at Dual-plate Gold-gold Microtrench Electrodes as Diagnostic Tool in Ionic Liquids

  • Montiel, Miguel A.
  • Iniesta, Jesus
  • Gross, Andrew J.
  • Thiemann, Thies
  • Marken, Frank
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Miguel A.|||/items/a285f8f2-9444-460d-bab6-4da82cbf2f6c
Ionic liquids provide high viscosity solvent environments with interesting voltammetric characteristics and new electrochemical mechanisms. Here, a gold-gold dual-plate microtrench electrode is employed in generator-collector mode to enhance viscosity-limited currents in ionic liquids due to fast feedback within small inter-electrode gaps (5 μm inter-electrode gap, 27 μm microtrench depth) and to provide a mechanistic diagnosis tool. Three redox systems in the ionic liquid BMIm+BF4− are investigated: (i) ferrocene oxidation, (ii) oxygen reduction, and (iii) 2-phenyl-naphthyl-1,4-dione reduction. Both transient and steady state voltammetric responses are compared. Asymmetric diffusion processes, reaction intermediates, and solubility changes in the ionic liquid are revealed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Voltammetric Behaviour of 7-Methylguanine Using Screen-printed Graphite Electrodes: towards a Guanine Methylation Electrochemical Sensor

  • Brotons Cuevas, Ariadna
  • Sanjuán, Ignacio
  • Banks, Craig E.
  • Vidal-Iglesias, Francisco J.
  • Solla-Gullón, José
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The determination of 7-methylguanine (7mG) is an interesting analytical target since its quantification can be correlated with the methylation of cytosine which is one of the most relevant epigenetic modification of DNA. In this work, screen-printed graphite electrodes were used to study the electrochemical characterization of 7mG by cyclic and square wave voltammetry. 7mG concentration and pH were examined, as well as the repeatability of the measurements. The electrochemical response of 7mG in the presence of guanine and adenine was also investigated. Results aim to the future development of an electrochemical sensor for the methylation degree in DNA.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of the metal loading on the electrocatalytic activity of carbon-supported (100) Pt nanoparticles

  • Vidal-Iglesias, Francisco J.
  • Montiel, Vicente
  • Solla-Gullón, José
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The influence of the metal loading (i.e. interparticle distance) of shape-controlled Pt nanoparticles on their electrocatalytic properties is evaluated for the first time. For this purpose, carbon-supported cubic Pt nanoparticles (~17 nm) with different metal loadings were prepared, characterized and electrochemically tested. To avoid differences in particle size and shape/surface structure of the Pt nanoparticles between samples, all samples used in this work were prepared from a single batch. The surface structure of the Pt nanoparticles was evaluated through the so-called hydrogen region and showed a preferential (100) orientation. Interestingly, the electroactive surface area of the samples, estimated both from the H or CO stripping processes, was directly proportional to the total Pt mass, independently of the metal loading. The CO stripping profile was also found to be unaffected by the metal loading. However, for ammonia and formic acid electrooxidation, the activity obtained was dependent on the metal loading. For ammonia oxidation, the optimal loading was found to be about 20–30 wt%. Nevertheless, this trend may be altered by different factors including (i) active surface area, (ii) metal loading and (ii) thickness of the catalytic layer. For formic acid electrooxidation, the results obtained showed a clear decrease of the activity for increasing metal loadings which is explained in terms of formic acid consumption on the top layers of the catalyst.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical lactate biosensor based upon chitosan/carbon nanotubes modified screen-printed graphite electrodes for the determination of lactate in embryonic cell cultures

  • Hernández Ibáñez, Naiara
  • García Cruz, Leticia
  • Montiel, Vicente
  • Foster, Christopher W.
  • Banks, Craig E.
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
l-lactate is an essential metabolite present in embryonic cell culture. Changes of this important metabolite during the growth of human embryo reflect the quality and viability of the embryo. In this study, we report a sensitive, stable, and easily manufactured electrochemical biosensor for the detection of lactate within embryonic cell cultures media. Screen-printed disposable electrodes are used as electrochemical sensing platforms for the miniaturization of the lactate biosensor. Chitosan/multi walled carbon nanotubes composite have been employed for the enzymatic immobilization of the lactate oxidase enzyme. This novel electrochemical lactate biosensor analytical efficacy is explored towards the sensing of lactate in model (buffer) solutions and is found to exhibit a linear response towards lactate over the concentration range of 30.4 and 243.9 µM in phosphate buffer solution, with a corresponding limit of detection (based on 3-sigma) of 22.6 µM and exhibits a sensitivity of 3417±131 µA M−1 according to the reproducibility study. These novel electrochemical lactate biosensors exhibit a high reproducibility, with a relative standard deviation of less than 3.8% and an enzymatic response over 82% after 5 months stored at 4 °C. Furthermore, high performance liquid chromatography technique has been utilized to independently validate the electrochemical lactate biosensor for the determination of lactate in a commercial embryonic cell culture medium providing excellent agreement between the two analytical protocols.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical reactivity and stability of platinum nanoparticles in imidazolium-based ionic liquids

  • Montiel, Miguel A.
  • Solla-Gullón, José
  • Sánchez-Sánchez, Carlos M.
  • Montiel, Miguel A.|||/items/a285f8f2-9444-460d-bab6-4da82cbf2f6c
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The electrocatalytic activity of synthesized quasi-spherical Pt nanoparticles (NPs) has been studied, taking as a model the COads electrooxidation reaction in two imidazolium-based ionic liquids such as 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C4mim+][NTf2−] and 1-butyl-3-methylimidazolium tetrafluoroborate [C4mim+][BF4−]. In particular, the effect of (i) water content, (ii) temperature, and (iii) nature of the room-temperature ionic liquid (RTIL) on the electrocatalytic behavior of these Pt NPs has been systematically evaluated. The obtained results show how important are those parameters, since the COads oxidation peak potential exhibits a great sensitivity depending on the water content, temperature, and nature of the RTIL used. Interestingly, the charge density associated with the COads electrooxidation peak strongly depends on the nature of the ionic liquid, which reflects the complexity of this electrocatalytic reaction in this media. Moreover, Pt NP electrocatalyst degradation in those RTILs, considered as a loss of electrochemically active area, has been evaluated and shows high stability despite the extreme potentials afforded in RTILs.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Understanding CO oxidation reaction on platinum nanoparticles

  • Arán-Ais, Rosa M.
  • Vidal-Iglesias, Francisco J.
  • Farias, Manuel J.S.
  • Solla-Gullón, José
  • Montiel, Vicente
  • Herrero, Enrique
  • Feliu, Juan M.
  • Arán-Ais, Rosa M.|||/items/9120125e-5943-4754-ba84-7200ee3b8c85
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
To understand how the CO oxidation reaction proceeds on nanoparticles, which have complex surface structures, the behavior of the nanoparticles has to be related to that of single crystal electrodes with a well-defined surface structure. However, the direct extrapolation of the results is not possible because significant differences in the behavior between both type of surfaces are observed. In single crystal electrodes in both acidic and alkaline media, the reaction initiates on defects on the CO adlayer. These defects can be already present on the surface, as surface defects or steps, or generated during the formation of the CO adlayer. In the case of steps, the oxidation starts on the lower part of the step. The only difference between the reaction behavior between acidic and alkaline solutions is the lower mobility of the CO in alkaline solutions, which generates adlayers with higher number of defects and give rise to multiple stripping peaks in stepped surfaces. Using these results, the differences of the behavior between single crystal electrodes and nanoparticles can be rationalized. In spite of the fact that nanoparticles have small ordered domains, the presence of sites in which the reaction is initiated, equivalent to the site in the lower part of the step, is almost negligible, and thus, the oxidation reaction takes place at higher potential values than in stepped surfaces with similar domain size. Also the effect of nanoparticle agglomeration in the oxidation has been rationalized.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fabrication, characterization and electrochemical response of pitch-derived open-pore carbon foams as electrodes

  • Hernández Ibáñez, Naiara
  • Montiel, Vicente
  • Molina Jordá, José Miguel
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Molina Jordá, José Miguel|||/items/04e52741-4cf2-482e-a208-79f3a27350e7
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
Macroporous carbon foams (Cfoams) were synthesized by the replication process from mesophase pitch precursor and then characterized for electrochemical sensing and electrosynthetic applications. Scanning electron and optical microscopies revealed a uniform macropore size distribution, replicating the characteristics of the leachable NaCl particles used as templating agent. Nitrogen adsorption/desorption isotherms revealed the absence of meso- or microporosity, and the specific surface area was measured to be 0.38 m2 g−1. Mercury intrusion porosimetry offered similar results for the specific surface area, and the pore size distribution was deduced to be in the interval of 80 nm–200 µm. X-ray photoelectron spectroscopy allowed concluding that the pore surface exhibited poor oxygenated functionalization. Cyclic voltammetry depicted a wide potential window for the oxidation and reduction of water, with small pseudo-capacitive process. The electrochemical behaviour of outer-sphere reversible redox couples provided a standard rate constant k° of ca. 0.7 cm s−1, which is slightly superior to that shown using a conventional glassy carbon electrode. Biomolecules such as ascorbic acid, uric acid and dopamine were also examined to shed some light on sensing applications. The viability of regenerating the coenzyme nicotinamide adenine dinucleotide using a rhodium redox complex has also been addressed in order to explore electrosynthetic potentialities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Surface structured platinum electrodes for the electrochemical reduction of carbon dioxide in imidazolium based ionic liquids

  • Hanc-Scherer, Florin A.
  • Montiel, Miguel A.
  • Montiel, Vicente
  • Herrero, Enrique
  • Sánchez-Sánchez, Carlos M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Montiel, Miguel A.|||/items/a285f8f2-9444-460d-bab6-4da82cbf2f6c
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
The direct CO2 electrochemical reduction on model platinum single crystal electrodes Pt(hkl) is studied in [C2mim+][NTf2−], a suitable room temperature ionic liquid (RTIL) medium due to its moderate viscosity, high CO2 solubility and conductivity. Single crystal electrodes represent the most convenient type of surface structured electrodes for studying the impact of RTIL ion adsorption on relevant electrocatalytic reactions, such as surface sensitive electrochemical CO2 reduction. We propose here based on cyclic voltammetry and in situ electrolysis measurements, for the first time, the formation of a stable adduct [C2mimH–CO2−] by a radical–radical coupling after the simultaneous reduction of CO2 and [C2mim+]. It means between the CO2 radical anion and the radical formed from the reduction of the cation [C2mim+] before forming the corresponding electrogenerated carbene. This is confirmed by the voltammetric study of a model imidazolium-2-carboxylate compound formed following the carbene pathway. The formation of that stable adduct [C2mimH–CO2−] blocks CO2 reduction after a single electron transfer and inhibits CO2 and imidazolium dimerization reactions. However, the electrochemical reduction of CO2 under those conditions provokes the electrochemical cathodic degradation of the imidazolium based RTIL. This important limitation in CO2 recycling by direct electrochemical reduction is overcome by adding a strong acid, [H+][NTf2−], into solution. Then, protons become preferentially adsorbed on the electrode surface by displacing the imidazolium cations and inhibiting their electrochemical reduction. This fact allows the surface sensitive electro-synthesis of HCOOH from CO2 reduction in [C2mim+][NTf2−], with Pt(110) being the most active electrode studied.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

pH effects on molecular hydrogen storage in porous organic cages deposited onto platinum electrodes

  • Hernández Ibáñez, Naiara
  • Lee, Jet-Sing M.
  • Iniesta, Jesus
  • Montiel, Vicente
  • Briggs, Michael E.
  • Cooper, Andrew I.
  • Madrid, Elena
  • Marken, Frank
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
Hydrogen absorption is a crucial process in energy storage (microscopic or macroscopic) and management and here a porous organic cage (POC) material is shown to bind and release hydrogen when deposited directly onto a platinum electrode and immersed into aqueous electrolyte. Preliminary voltammetry experiments for the POC CC3 deposited onto a platinum disc electrode reveal uptake and release of hydrogen gas (probably coupled to water release and uptake, respectively) in the vicinity of the electrode. Significant pH effects on the rate of binding and release are reported and explained with a change in H2 binding rate. In future, “wet” POCs or POCs dispersed in aqueous solution could be employed for enhancing hydrogen capture/transport in energy applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Oxygen crossover effect on palladium and platinum based electrocatalysts during formic acid oxidation studied by scanning electrochemical microscopy

  • Perales-Rondón, Juan V.
  • Herrero, Enrique
  • Solla-Gullón, José
  • Sánchez-Sánchez, Carlos M.
  • Vivier, Vincent
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The electrocatalytic activity towards formic acid oxidation reaction (FAOR) in the presence of simultaneous oxygen reduction reaction (ORR) displayed by 5 different metallic nanoparticles (NPs) (Pt100, Pt75Pd25, Pt50Pd50, Pt25Pd75 and Pd100) was studied and compared using chronoamperometry and the micropipette delivery/substrate collection (MD/SC) mode of the scanning electrochemical microscopy (SECM). This is of special interest for understanding the O2 crossover effect in direct formic acid fuel cells (DFAFCs) and to search highly selective electrocatalysts useful in mixed-reactant fuel cells (MRFCs). A detailed analysis of the SECM results in comparison with chronoamperometry demonstrates, for the first time, the relevant role played by dissolved O2 in solution on the Pd100 NPs deactivation during FAOR, which cannot be explained neither by the specific adsorption of dichloroethane (DCE) on Pd nor by a simple addition of two opposed currents coming from simultaneous FAOR and ORR. Two main mechanistic factors are proposed for explaining the different sensitivity towards O2 presence in solution during FAOR when comparing Pd- and Pt-rich catalysts. On the one hand, the relevance of H2O2 production (ORR byproduct) and accumulation on Pd NPs, which alters its performance towards FAOR. On the other hand, the predominance of the poisoning pathway forming COads during FAOR on Pt NPs, whose oxidation is facilitated in the presence of traces of O2. Interestingly, the deactivation effect displayed on Pd100 NPs during FAOR due to the H2O2 generation and accumulation becomes negligible if a convective regime is applied in solution. SECM is proved as a fast and powerful technique for studying O2 crossover effect in different electrocatalysts and for identifying highly selective electrocatalysts candidates for MRFCs. In particular, among the samples evaluated, Pt75Pd25 NPs present the highest average performance for FAOR in 0.5 M H2SO4 solution in the presence of O2 within the potential range under study (0.3–0.7 V vs RHE).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

An alternative to hydrogenation processes. Electrocatalytic hydrogenation of benzophenone

  • Mozo Mulero, Cristina
  • Sáez, Alfonso
  • Iniesta, Jesus
  • Montiel, Vicente
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Sáez, Alfonso|||/items/50f4fc4a-e26b-4ac2-9fe2-bafec2319d30
The electrocatalytic hydrogenation of benzophenone was performed at room temperature and atmospheric pressure using a polymer electrolyte membrane electrochemical reactor (PEMER). Palladium (Pd) nanoparticles were synthesised and supported on a carbonaceous matrix (Pd/C) with a 28 wt % of Pd with respect to carbon material. Pd/C was characterised by transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Cathodes were prepared using Pd electrocatalytic loadings (LPd) of 0.2 and 0.02 mg cm−2. The anode consisted of hydrogen gas diffusion for the electrooxidation of hydrogen gas, and a 117 Nafion exchange membrane acted as a cationic polymer electrolyte membrane. Benzophenone solution was electrochemically hydrogenated in EtOH/water (90/10 v/v) plus 0.1 M H2SO4. Current densities of 10, 15 and 20 mA cm−2 were analysed for the preparative electrochemical hydrogenation of benzophenone and such results led to the highest fractional conversion (XR) of around 30% and a selectivity over 90% for the synthesis of diphenylmethanol upon the lowest current density. With regards to an increase by ten times the Pd electrocatalytic loading the electrocatalytic hydrogenation led neither to an increase in fractional conversion nor to a change in selectivity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Dual-Plate Gold-Gold Microtrench Electrodes for Generator-Collector Voltammetry without Supporting Electrolyte

  • Montiel, Miguel A.
  • Iniesta, Jesus
  • Gross, Andrew J.
  • Marken, Frank
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Miguel A.|||/items/a285f8f2-9444-460d-bab6-4da82cbf2f6c
A gold-gold dual-plate microtrench electrode system based on two oppositely placed gold surfaces with 5 mm length, 17 μm average depth, and 6 μm inter-electrode gap is employed in generator-collector configuration in a four-electrode cell (counter electrode, reference electrode, and two independent working electrodes denoted “generator” – with scanning potential – and “collector” – with fixed potential). The dual-plate microtrench electrodes were investigated for (i) the reduction of Ru(NH3)63+, (ii) the oxidation of ferrocenemethanol, and (iii) the oxidation of iodide in aqueous media, all as a function of supporting electrolyte concentration. It is shown that due to the inter-electrode feedback character of the generator-collector currents, well-defined steady state sensor responses are obtained for the collector electrode even in the absence of added electrolyte. The variation in the mass transport limited steady state current (measured at the collector electrode) with addition/removal of supporting electrolyte remains low (compared to unexpectedly stronger effects caused by the switch between reduction and oxidation conditions at the collector electrode). Microtrench electrode systems are suggested for sensing applications without/with varying levels of supporting electrolyte.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Carbonization of polymers of intrinsic microporosity to microporous heterocarbon: Capacitive pH measurements

  • Hernández Ibáñez, Naiara
  • Iniesta, Jesus
  • Montiel, Vicente
  • Armstrong, Robert
  • Taylor, Stuart H.
  • Madrid, Elena
  • Rong, Yuanyang
  • Castaing, Rémi
  • Malpass-Evans, Richard
  • Carta, Mariolino
  • McKeown, Neil B.
  • Marken, Frank
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
A nitrogen-containing polymer of intrinsic microporosity (PIM-EA-TB-H2; nitrogen adsorption surface area 846 m2 g−1) is vacuum carbonized at 700 °C and thereby directly without post-treatment converted into a microporous heterocarbon (cPIM; N2 adsorption surface area 425 m2 g−1). Nitrogen functionalities in the polymer backbone are retained in the heterocarbon and appear responsible for unusual time-, electrolyte-, and pH-dependent properties. Electrochemical characterization suggests a high specific capacitance (typically 50 F g−1) but only after prolonged immersion in aqueous HClO4. The time-dependent increase in capacitance during immersion is assigned to slow hydration and ingress of HClO4 into hydrophobic micropores (H2SO4 or H3PO4 are more hydrophilic and much less effective). Once hydrated, the microporous heterocarbon exhibits pH-dependent capacitance “switching” over a wide pH range and analytical applications as “capacitive” pH sensor are proposed.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sn nanoparticles on gas diffusion electrodes: Synthesis, characterization and use for continuous CO2 electroreduction to formate

  • Castillo, Andrés del
  • Alvarez-Guerra, Manuel
  • Solla-Gullón, José
  • Sáez, Alfonso
  • Montiel, Vicente
  • Irabien, Ángel
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Sáez, Alfonso|||/items/50f4fc4a-e26b-4ac2-9fe2-bafec2319d30
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Electrochemical reduction of CO2 has been pointed out as an interesting strategy to convert CO2 into useful chemicals. In addition, coupling CO2 electroreduction with renewable energies would allow storing electricity from intermittent renewable sources such as wind or solar power. In this work, an easy and fast method is adapted for the synthesis of pure and carbon supported Sn nanoparticles. The resulting nanoparticles have been characterized by transmission electron microscopy and their electrocatalytic properties towards CO2 reduction evaluated by cyclic voltammetry. Carbon supported Sn nanoparticles have been subsequently used to prepare Gas Diffusion Electrodes (Sn/C-GDEs). The electrodes have been characterized by scanning electron microscopy and also by cyclic voltammetry. Finally, the electrodes were tested on a continuous and single pass CO2 electroreduction filter-press type cell system in aqueous solution, to obtain formate at ambient pressure and temperature. These Sn/C-GDEs allow working at high current densities with low catholyte flow. Thus, for instance, at 150 mA cm−2, a 70% Faradaic Efficiency (FE) was obtained with a formate concentration of 2.5 g L−1. Interestingly, by increasing the current density to 200 mA cm−2 and decreasing the flow rate, a concentration over 16 g L−1 was reached. Despite the high concentrations obtained, further research is still required to keep high FE operating at high current densities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Enhanced catalytic activity and stability for the electrooxidation of formic acid on lead modified shape controlled platinum nanoparticles

  • Perales-Rondón, Juan V.
  • Solla-Gullón, José
  • Herrero, Enrique
  • Sánchez-Sánchez, Carlos M.
  • Herrero, Enrique|||/items/ce929130-035f-4c72-803a-a77d9c5ae46d
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
High catalytic activity for formic acid oxidation reaction (FAOR) is demonstrated in Pb modified shape-controlled Pt nanoparticles (NPs). Cyclic voltammetry is used to follow the effective modification of Pt NPs by Pb. Octahedral shaped Pt NPs (having a (111) preferential surface structure) modified by Pb are proved the most active electrocatalyst studied towards FAOR and display a catalytic activity of c.a. 7 mA cm−2 at 0.5 V in 0.1 M formic acid solution. This current density represents an enhancement factor of 29.5 with respect to the unmodified Pt NPs and this is 2.7 and 2.3 times higher than that found on Tlθ/100-Pt NPs and Sbθ/111-Pt NPs, respectively, some of the most active electrocatalysts based on adatoms modified Pt NPs reported so far. This outstanding activity is displayed at maximum Pb coverage and also confers a wide electrocatalyst stability over the entire potential range studied. FAOR is also studied using scanning electrochemical microscopy (SECM) by the micropipette delivery/substrate collection (MD/SC) working mode as a preliminary rapid test to identify active electrocatalysts. In particular, the remarkable activity enhancement exhibited by a Pt ultramicroelectrode (100 μm diameter) modified by Pb is rapidly imaged by SECM providing preliminary catalyst performance information. Thus, this technique emerges as a suitable and fast method to test, and in some cases quantify, catalyst activity for reactions of interest in fuel cell applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Chronoamperometric Study of Ammonia Oxidation in a Direct Ammonia Alkaline Fuel Cell under the Influence of Microgravity

  • Acevedo, Raul
  • Poventud-Estrada, Carlos M.
  • Morales-Navas, Camila
  • Martínez-Rodríguez, Roberto A.
  • Ortiz-Quiles, Edwin
  • Vidal-Iglesias, Francisco J.
  • Solla-Gullón, José
  • Nicolau, Eduardo
  • Feliu, Juan M.
  • Echegoyen, Luis
  • Cabrera, Carlos R.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
This is a study of the chronoamperometric performance of the electrochemical oxidation of ammonia in an alkaline fuel cell for space applications. Under microgravity the performance of a fuel cell is diminished by the absence of buoyancy since nitrogen gas is produced. The following catalysts were studied: platinum nanocubes of ca. 10nm, platinum nanocubes on carbon Vulcan ™ and platinum on carbon nanoonion support of ca. 10nm. These nanomaterials were studied in order to search for catalysts that may reduce or counter the loss of ammonia oxidation current densities performance under microgravity conditions. Chronoamperometries at potential values ranging from 0.2 V to 1.2V vs. cathode potential (breathing Air/300ml/min/82737 Pa) in 1.0 M NH4OH (30ml/min in anode) were done during over 30 parabolas in NASA’s C9 airplane The Weightless Wonder in January 2016 from Ellington Field Houston. The current densities at 15s in the chronoamperometry experiments showed diminishing values under microgravity and in some cases improvements of up to 92%, for Pt-carbon nanoonions, and over 70% for the three catalysts versus ground at potentials ranging from 0.2 to 0.4V after 5 minutes of chronoamperometric conditions. At higher potentials, 1.0V or higher, Pt nanocubes and Pt-carbon nanoonions showed enhancements of up to 32% and 24%, respectively. At these higher potentials we will have a contribution of oxygen evolution. The changes in current behavior are attributed to the sizes of the catalyst materials and the time needed for the N2 bubbles detachment from the Pt surface under microgravity conditions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemical Characterisation of Platinum Nanoparticles Prepared in a Water-in-Oil Microemulsion in the Presence of Different Modifiers and Metal Precursors

  • Martínez-Rodríguez, Roberto A.
  • Vidal-Iglesias, Francisco J.
  • Solla-Gullón, José
  • Cabrera, Carlos R.
  • Feliu, Juan M.
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
In this work, water-in-oil microemulsions are used in the presence of various modifiers and metal precursors to obtain preferentially oriented Pt nanoparticles. Preferentially oriented cubic nanoparticles, enriched in (100) sites, are prepared using specific concentrations of HCl, HBr, H2SO4 and H3PO4. By contrast, the use of citric and oxalic acids increases the amount of (111) sites, albeit not significantly. Nanoparticles are electrochemically characterised by hydrogen and Ge adsorption/desorption processes, as well as CO stripping. Finally, the electrocatalytic activity of the nanoparticles having the highest percentage of (100) sites is evaluated for ammonia oxidation, confirming the electrochemical characterisation results. The results obtained indicate that, 15 % HCl-modified Pt nanoparticles synthesised using K2PtCl4 as metal precursor displayed the highest amount of (100) sites (46.7 %), and gave the highest peak current density for ammonia oxidation, around fivefold that of polyoriented Pt.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

On the Specific Adsorption of 7-methylguanine on Au(111) Surfaces for the Electroanalytical Sensing of Methylation Levels

  • Brotons Cuevas, Ariadna
  • Feliu, Juan M.
  • Montiel, Vicente
  • Iniesta, Jesus
  • Vidal-Iglesias, Francisco J.
  • Solla-Gullón, José
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The electrochemical determination of 7-methylguanine (7-mG) may result of interest because its presence can serve as probe of cytosine methylation of which is known as the most relevant epigenetic modification of DNA. This work explores the electrochemical response of 7-mG on different gold surfaces, both poly and single crystalline surfaces (Au (110), Au (111) and Au (100)). The results show that the adsorption-desorption process of the 7-mG is sensitive to the surface structure of the gold electrodes. Particularly, 7-mG adsorption-desorption profile on a Au (111) electrode exhibits some specific contributions which are found sensitive to the 7-mG concentration and, thereby could allow its quantification. These results may shed light on the future development of an electrochemical sensor for the diagnosis of the methylation degree in DNA.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The electrochemistry of 5-halocytosines at carbon based electrodes towards epigenetic sensing

  • Sanjuán, Ignacio
  • Martín-Gómez, Andrés Noel
  • Graham, John P.
  • Hernández Ibáñez, Naiara
  • Banks, Craig E.
  • Thiemann, Thies
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
Epigenetic modifications in DNA are strongly linked to the triggering and development of pathophysiological disorders and cancer diseases. The halogenation of DNA via radical species, particularly the formation of 5-chlorocytosine (ClC), has recently emerged as epigenetic modification. This work deals for the first time with the exploration of the electrochemical behaviour of ClC on different carbon electrodes such as glassy carbon and boron-doped diamond using cyclic voltammetry and square wave voltammetry. When comparing both carbon materials, the use of glassy carbon turned out to be the appropriate in terms of a more well-defined anodic wave and higher sensitivity. The electrochemical oxidation potential of ClC resulted to be linearly dependent on the pH with a maximum current intensity in acetic acid buffer solution under the conditions used. Moreover, a linear response between peak current intensity and ClC concentration was obtained within the range of 200 and 1000 μM with a limit of detection of 200 μM. In order to elucidate the reaction mechanism of the process, the main oxidation products after a preparative electrolysis were detected by HPLC-MS. Simultaneous detection of ClC in the presence of the unmodified cytosine and mixtures containing other nucleic bases such as guanine, adenine and thymine was also addressed. Finally, the effect of the halogen atom (X = F, Cl, Br) located at position C-5 of the cytosine entity upon the electrooxidation process was examined by theoretical calculations, too.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

An Easy Method for Calculating Kinetic Parameters of Electrochemical Mechanisms: Temkin’s Formalism

  • Vidal-Iglesias, Francisco J.
  • Solla-Gullón, José
  • Montiel, Vicente
  • Aldaz Riera, Antonio
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
One of the typical problems addressed in electrochemical textbooks is how to define the theoretical kinetic law of an electrochemical reaction and how to propose a plausible mechanism for this reaction from its kinetic parameters, usually the Tafel slope and reaction orders.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The Role of Carbon on Copper–Carbon Composites for the Electrooxidation of Alcohols in an Alkaline Medium

  • García Cruz, Leticia
  • Ania, Conchi O.
  • Carvalho, Ana Paula
  • Bandosz, Teresa J.
  • Montiel, Vicente
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
Copper–carbon composites were prepared following various different synthetic routes and using various carbon precursors (i.e., lignocellulose and graphite oxide), and were used as electrocatalysts for the oxidation of propargyl alcohol (PGA) in an alkaline medium. The electrochemical response of the copper-based catalysts was analyzed in terms of the influence of the metallic species, the carbon matrix incorporated in the composites, and the chemical structure of the ionomers—Nafion and poly (4-vinylpyridine) cross-linked methyl chloride quaternary salt resin (4VP)—used in the fabrication of the electrodes. Data has shown that the incorporation of reduced graphene oxide sheets between the copper metallic particles increased the performance due to the increased conductivity provided by the carbonaceous phase. Catalytic inks with ca. 40 wt.% Nafion and 12 wt.% 4VP as ionomers provided the best electrochemical response and cohesion of the catalysts, minimizing the losses in the electroactivity of the copper species.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrocatalytic studies on imidazolium based ionic liquids: defining experimental conditions

  • Montiel, Miguel A.
  • Solla-Gullón, José
  • Montiel, Vicente
  • Sánchez-Sánchez, Carlos M.
  • Montiel, Miguel A.|||/items/a285f8f2-9444-460d-bab6-4da82cbf2f6c
  • Montiel, Vicente|||/items/bd7466e3-f423-4916-87ab-1bc5372bde2f
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The number of publications devoted to studying electrochemical reactions in room temperature ionic liquids (RTILs) is constantly growing, but very few of them have been devoted to defining proper experimental conditions to obtain reproducible electrochemical results. In this work, we demonstrate that the combination of a proper RTIL purification treatment and a filtered Ar gas stream allow us to obtain featureless voltammograms in [C4mim][BF4], [C4mim][NTf2], and [C4m2im][NTf2], which otherwise present signals associated with different types of impurities such as water and some minor electroactive impurities acquired during the RTIL synthesis process. Moreover, we demonstrate that bubbling Ar, or another inert gas, through the electrolyte in order to purge O2 dissolved in RTILs is one of the major sources of water and O2 impurities incorporated in RTILs within the electrochemical cell. To overcome this source of water uptake, we have incorporated a gas stream purification filter before the gas reaches the RTIL in the electrochemical cell. To illustrate the effect of these impurities in relevant electrocatalytic studies, we study the electrocatalytic reduction of CO2 on Pt nanoparticles and the key role of an appropiate filter when the CO2 gas stream is bubbled within imidazolium based RTILs. Our cyclic voltammetric studies point out that CO2 electroreduction on Pt nanoparticles only presents activity in [C4mim][NTf2] and [C4m2im][NTf2], thus suggesting that the C-2 position on the imidazolium ring is not the key position in CO2 electrochemical reduction. In contrast, the same Pt nanoparticles are inactive towards CO2 electroreduction in [C4mim][BF4], which is a more hydrophilic RTIL.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A Facile and Cost-effective Electroanalytical Strategy for the Quantification of Deoxyguanosine and Deoxyadenosine in Oligonucleotides Using Screen-printed Graphite Electrodes

  • Brotons Cuevas, Ariadna
  • Sanjuán, Ignacio
  • Foster, Christopher W.
  • Banks, Craig E.
  • Vidal-Iglesias, Francisco J.
  • Solla-Gullón, José
  • Iniesta, Jesus
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
The development of electroanalytical methods for the detection and quantification of nucleotides in DNA offers vital implications in assessing the degree of oxidation or epigenetic modification in DNA. Unfortunately, the electrochemical response of oligonucleotides is strongly influenced by the size, composition and nucleic base sequence. In this article, an optimized analytical procedure for the enzymatically breakdown of the oligonucleotides to their corresponding nucleotides for the evaluation of the electrochemical response through the use of square wave voltammetry (SWV) is presented. Enzymatic digestion of oligonucleotides has been optimized in terms of buffer composition, digestion time, strategy for stopping the enzymatic reaction and filtration requirement for enzyme removal, and then compared to an established protocol. Under the optimized protocol SWV response of a number of untreated and enzymatically digested six-mer oligonucleotides, namely 5′-GGGGGG-3′, 5′-AAAAAA-3′, 5′-CGCGCG-3′ and 5′-AAACGC-3′ have been analysed, providing a higher sensitivity for the determination of guanosine and adenosine monophosphate species under digestion conditions with a more facile and cost effective procedure. The novel strategy for the enzymatically treated oligonucleotides in combination with the SWV response provides a proof of principle for feasible applications in the diagnosis of methylated guanosine in DNA as a potential biomarker due to its relation with cancer.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoporous carbon/WO3 anodes for an enhanced water photooxidation

  • Gomis Berenguer, Alicia
  • Celorrio, Verónica
  • Iniesta, Jesús
  • Fermin, David J.
  • Ovín Ania, María Concepción
This work provides new insights in the field of applied photoelectro chemistry based on the use of nanoporous carbons as additives to tungsten oxide for the photooxidation of water under potential bias. Using a nanoporous carbon of low surface functionalization as additive to WO3 we have shown the dependence of the photochemical oxidation of water with the wavelength of the irradiation source. Photoelectrochemical responses obtained under monochromatic illumination show a significant increase in the incident photon-to-current conversion efficiency (IPCE) values for electrodes featuring up to 20 wt% carbon additive. Photoelectrochemical transient responses also show a sharp potential dependence, suggesting that the performance of the electrodes is strongly influenced by the carrier mobility and recombination losses. Despite the modest IPCE values of the W/NC electrodes (due to high bulk recombination and poor electron transport properties of the electrodes), our data shows that the incorporation of an optimal amount of nanoporous carbon additive to WO3 can enhance the carrier mobility of the semiconductor, without promoting additional recombination pathways or shadowing of the photoactive oxide., COA thanks the financial support of the European Research Council through a Consolidator Grant (ERC-CoG-648161-PHOROSOL) and the Spanish MINECO (grants CTM2014/56770-R, CTQ2013-48280-C3-3-R). VC and DJF kindly thank the UK Catalysis Hub for resources and support provided via the membership of the UK Catalysis Hub Consortium and funded by EPSRC (grants EP/ K014706/1, EP/K014668/1, EP/K014854/1, EP/K014714/1 and EP/M013219/1). AGB thanks her PhD fellowship (BES-2012-060410) and VC thanks the UK National Academy and the Royal Society by the support though the Newton International Fellows program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of confinement of horse heart cytochrome c and formate dehydrogenase from Candida boidinii on mesoporous carbons on their catalytic activity

  • Hernández Ibáñez, Naiara
  • Montiel, Vicente
  • Gomis Berenguer, Alicia
  • Ovín Ania, María Concepción
  • Iniesta, Jesus
This study reports the immobilization of two biocatalysts (e.g., cytochrome c—Cyt c—and the non-metalloenzyme formate dehydrogenase from Candida boidinii–cbFDH) on a series of mesoporous carbons with controlled pore sizes. The catalytic activity of the nanoconfined proteins was correlated with the pore size distribution of the carbon materials used as supports. The electrochemical behaviour of nanoconfined Cyt c showed direct electron transfer electroactivity in pore sizes matching tightly the protein dimension. The pseudo-peroxidase activity towards H2O2 reduction was enhanced at pH 4.0, due to the protein conformational changes. For cbFDH, the reduction of CO2 towards formic acid was evaluated for the nanoconfined protein, in the presence of nicotinamide adenine dinucleotide (NADH). The carbons displayed different cbFDH uptake capacity, governed by the dimensions of the main mesopore cavities and their accessibility through narrow pore necks. The catalytic activity of nanoconfined cbFDH was largely improved, compared to its performance in free solution. Regardless of the carbon support used, the production of formic acid was higher upon immobilization with lower nominal cbFDH:NADH ratios., NHI. VM and JI thank MINICINN, Spain (projects CTQ2013-48280-C3-3-R and CTQ2016-76231-C2-2-R) for financial support. COA thanks the financial support of the European Research Council through a Consolidator Grant (PHOROSOL 684161)., Peer reviewed