Pasar al contenido principal

DESARROLLO DE FASES ESTACIONARIAS MONOLITICAS HIBRIDAS POLIMERO-NANOPARTICULAS Y SUS APLICACIONES EN SEPARACION

CTQ2014-52765-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation of organic monolithic columns in polytetrafluoroethylene tubes for reversed-phase liquid chromatography

  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
  • Torres-Cartas, Sagrario|||0000-0002-5139-7891
  • Meseguer-Lloret, S.|||0000-0001-5726-032X
  • Gómez Benito, Carmen|||0000-0003-0964-6476
  • Carrasco-Correa, Enrique
  • Simó-Alfonso, Ernesto F.
  • Ramis-Ramos, Guillermo
  • Herrero-Martínez, José Manuel
[EN] In this work, a method for the preparation and anchoring of polymeric monoliths in a polytetrafluoroethylene (PTFE) tubing as a column housing for microbore HPLC is described. In order to assure a covalent attachment of the monolith to the inner wall of the PTFE tube, a two-step procedure was developed. Two surface etching reagents, a commercial sodium naphthalene solution (Fluoroetch®), or mixtures of H2O2 and H2SO4, were tried and compared. Then, the obtained hydroxyl groups on the PTFE surface were modified by methacryloylation. Attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy and scanning electron microscopy (SEM) confirmed the successful modification of the tubing wall and the stable anchorage of monolith to the wall, respectively. Special emphasis was also put on the reduction of the unwanted effects of shrinking of monolith during polymerization, by using an external proper mold and by selecting the adequate monomers in order to increase the flexibility of the polymer. Poly(glycidyl methacrylate-co-divinylbenzene) monoliths were in situ synthesized by thermal polymerization within the confines of surface-vinylized PTFE tubes. The modified PTFE tubing tightly held the monolith, and the monolithic column exhibited good pressure resistance up to 20 MPa. The column performance was also evaluated via the isocratic separation of a series of alkylbenzenes in the reversed-phase mode. The optimized monolithic columns gave plate heights ranged between 70 and 80 um. The resulting monoliths were also satisfactorily applied to the separation of proteins., This work was supported by projects CTQ2014-52765-R (MINECO of Spain and Fondo Europeo de Desarrollo Regional, FEDER) and PROMETEO/2016/145 (Conselleria d'Educacio, Investigacio, Cultura i Esport, Generalitat Valenciana, Spain). The authors also thank Dr. P. Amoros del Toro from Institute of Materials Science (University of Valencia) and Dr. S. Armenta from Department of Analytical Chemistry for their help in surface area and FT-IR measurements, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simultaneous determination of main phenolic acids and flavonoids in tomato by micellar electrokinetic capillary electrophoresis

  • Martí-Renau, Raul
  • Valcárcel Germes, Mercedes
  • Herrero-Martínez, José Manuel
  • ROSELLO RIPOLLES, SALVADOR
  • Cebolla Cornejo, Jaime|||0000-0002-2607-9920
[EN] A methodology for the determination of tomato phenolic acids and flavonoids has been developed combining MEKC and DAD detection. The influence on polyphenol separation of pH and background electrolyte, BGE (borax, acetonitrile, methanol and SDS concentrations), was studied and optimized using response surface methodology and weighted desirability function. Separation of polyphenols was achieved within 20 min at 15 degrees C using 11.3 mM borax and 11.2 mM SDS adjusted to pH 8.5 as BGE. Validation was performed using standards and tomato extracts. Recoveries ranged from 77 to 106%. Acceptable repeatabilities were obtained for peak area (% RSD <3.1% and <3.7%) and migration times (% RSD <0.2% and <1.4%) for intra-and inter-day respectively. Detection limits ranged between 0.8 and 3.8 mg kg (1). Five and seven of these polyphenols were determined in samples of tomato and related species. This methodology will be valuable tool in breeding programs, analyzing a large number of samples. (C) 2016 Elsevier Ltd. All rights reserved., This study was partially supported by Project RTA2011-00062C04 funded by Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria. J.M. H-M expreses his thanks to the project CTQ2014-52765-R (MINECO of Spain and FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of azoxystrobin and chlorothalonil using a methacrylate-based polymer modified with gold nanoparticles as solid-phase extraction sorbent

  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
  • Gómez Benito, Carmen|||0000-0003-0964-6476
  • Simo Alfonso, Ernesto
  • Herrero Martinez, Jose Manuel
This paper describes a novel and sensitive method for extraction, preconcentration, and determination of two important widely used fungicides, azoxystrobin, and chlorothalonil. The developed methodology is based on solid-phase extraction (SPE) using a polymeric material functionalized with gold nanoparticles (AuNPs) as sorbent followed by high-performance liquid chromatography (HPLC) with diode array detector (DAD). Several experimental variables that affect the extraction efficiency such as the eluent volume, sample flow rate, and salt addition were optimized. Under the optimal conditions, the sorbent provided satisfactory enrichment efficiency for both fungicides, high selectivity and excellent reusability (> 120 re-uses). The proposed method allowed the detection of 0.05 mu g L-1 of the fungicides and gave satisfactory recoveries (75-95 %) when it was applied to drinking and environmental water samples (river, well, tap, irrigation, spring, and sea waters)., This work was supported by project CTQ2014-52765-R (Ministerio de Economia y Competitividad (MINECO) of Spain and Fondo Europeo de Desarrollo Regional (FEDER)) and PROMETEO/2016/145 (Conselleria de Educacion, Investigacion, Cultura y Deporte, Generalitat Valenciana, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Extraction and preconcentration of organophosphorus pesticides in water by using a polymethacrylate-based sorbent modified with magnetic nanoparticles

  • Meseguer-Lloret, S.|||0000-0001-5726-032X
  • Torres-Cartas, Sagrario|||0000-0002-5139-7891
  • Catalá-Icardo, Mónica|||0000-0001-5897-8501
  • Simó-Alfonso, Ernesto F.
  • Herrero-Martínez, José Manuel
[EN] A polymethacrylate-based sorbent modified with magnetic nanoparticles (MNPs) has been synthesized and used as sorbent for solid-phase extraction (SPE) and magnetic solid-phase extraction (MSPE) of three organophosphorus pesticides (phosmet, pirimiphos-methyl, and chlorpyrifos) in water samples followed by high-performance liquid chromatography diode array detection. The sorbent was prepared from a glycidyl methacrylate-based polymer, modified with a silanizing agent, followed by immobilization of MNPs on the surface of the material. The sorbent was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. Comparative studies of this support were done both in conventional SPE cartridge and MSPE approach. Several extraction parameters (loading pH, elution solvent, eluting volume, and loading flow rate) were investigated in detail. Under optimal conditions, the proposed sorbent gave an excellent enrichment efficiency of analytes and detection limits between 0.01 and 0.25 &#956;g L&#8722;1. The recoveries of organophosphorus pesticides in spiked water samples were in the range of 71 98%, and the developed sorbent showed a high reusability (up to 50 uses without losses in recovery). The proposed method was satisfactorily applied to the analysis of these pesticides in water samples from different sources., This work was supported by projects CTQ2014-52765-R (MINECO of Spain and FEDER) and PROMETEO/2016/145 (Conselleria de Educacion, Investigacion, Cultura y Deporte of Generalitat Valenciana, Spain).