Pasar al contenido principal

NUEVAS ESTRATEGIAS PARA LA CONVERSION DE CO2 UTILIZANDO CATALIZADORES BAJO RADIACION ELECTROMAGNETICA

CTQ2016-77147-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silver-copper oxide heteronanostructures for the plasmonic-enhanced photocatalytic oxidation of N-hexane in the visible-NIR range

  • Suárez, Hugo
  • Ramírez, Adrian
  • Bueno-Alejo, Carlos
  • Hueso, José L.
This article belongs to the Special Issue Advanced Photocatalytic Materials., Volatile organic compounds (VOCs) are recognized as hazardous contributors to air pollution, precursors of multiple secondary byproducts, troposphere aerosols, and recognized contributors to respiratory and cancer-related issues in highly populated areas. Moreover, VOCs present in indoor environments represent a challenging issue that need to be addressed due to its increasing presence in nowadays society. Catalytic oxidation by noble metals represents the most effective but costly solution. The use of photocatalytic oxidation has become one of the most explored alternatives given the green and sustainable advantages of using solar light or low-consumption light emitting devices. Herein, we have tried to address the shortcomings of the most studied photocatalytic systems based on titania (TiO2) with limited response in the UV-range or alternatively the high recombination rates detected in other transition metal-based oxide systems. We have developed a silver-copper oxide heteronanostructure able to combine the plasmonic-enhanced properties of Ag nanostructures with the visible-light driven photoresponse of CuO nanoarchitectures. The entangled Ag-CuO heteronanostructure exhibits a broad absorption towards the visible-near infrared (NIR) range and achieves total photo-oxidation of n-hexane under irradiation with different light-emitting diodes (LEDs) specific wavelengths at temperatures below 180 °C and outperforming its thermal catalytic response or its silver-free CuO illuminated counterpart., This research was funded by ARCADIA (grant CTQ2016-77147) and CADENCE (grant 742684) and the APC was waived by the journal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-radiance LED-driven fluidized bed photoreactor for the complete oxidation of n-hexane in air

  • Bueno-Alejo, Carlos
  • Hueso, José L.
  • Mallada, Reyes
  • Julian, Ignacio
  • Santamaría, Jesús
This work presents a highly efficient photo-reactor configuration for VOC abatement. It consists of a fluidized bed made of commercial, easy to fluidize, transparent borosilicate glass beads coated with commercial TiO2 nanoparticles (0.15–2.3 wt% loadings). Herein, we demonstrate that the use of high-radiance/low consumption UV-LEDs as irradiation sources with a deeper light penetration under fluidizing conditions facilitates the photocatalytic response to achieve the complete oxidation of VOCs. The role of different parameters such as catalyst loading and irradiation power have been thoroughly studied and evaluated to maximize the full combustion of n-hexane. Under the high radiance (up to 2200 mW/cm2) conditions used the bed heats significantly (up to 190 °C), although this did not have an effect on the conversions reached, which depended solely on the wavelength and power used. The productivity of the photoreactor tested and the space velocity used were around 5.25 × 10−2 mol/g·h and 12000 h−1 respectively., Financial support from MINECO (Spain) with projects CTQ2016-77147-R and CTQ2016-79419-R and the CIBER-BBN is gratefully acknowledged. We also acknowledge the support from HECTOR project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-situ deposition of plasmonic gold nanotriangles and nanoprisms onto layered hydroxides for full-range photocatalytic response towards the selective reduction of p-nitrophenol

  • Graus, Javier
  • Bueno-Alejo, Carlos
  • Hueso, José L.
This article belongs to the Special Issue Recent Advances on Carbon and Noble-Metal Based Photocatalysts., In this work, we present photocatalysis as a greener alternative to conventional catalysis where harsh reaction conditions, temperature and/or pressure are needed. Photodegradation of organic pollutants is a cost-effective, eco-friendly solution for the decontamination of water and air, and is a field that has been continuously growing over the last decade. Plasmonic metal nanoparticles absorb light irradiation that is transferred to the chemical reaction in a different fashion. Furthermore, plasmonic nanostructures can be combined with other materials, such as semiconductors or a basic support, to create hybrid systems capable of overcoming certain challenges that photocatalysis is facing nowadays and to expand the photocatalytic response towards the whole visible-near infrared (Vis-NIR) ranges. The main objective of this work has been to in-situ synthesize plasmonic anisotropic gold nanoparticles onto hydrotalcite (HT) and calcined hydrotalcite (CHT) supports by way of a sequential deposition-reduction (DR) process and to evaluate their efficiency as heterogeneous catalysts towards the selective oxidation of p-nitrophenol (hereafter 4-NP), a well-known model contaminant, either in the absence or the presence of full-range light irradiation sources (LEDs) spanning the whole UV-Vis-NIR range. Special attention has been paid to the optimization of the catalyst preparation parameters, including the pH and the concentration of reducing and stabilizing agents. Interestingly, the use of thermally modified hydrotalcites has enabled a strong metal-support interaction to induce the preferential formation of triangular-shaped Au nanoparticles with ca. 0.8 wt.% loading while increasing the colloidal stability and surface area of the catalyst with respect to the commercial untreated HT supports., This research was funded by ARCADIA (grant CTQ2016-77147) and CADENCE (grant 742684) and the APC was waived by the Editorial Team of Catalysts., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metal-doped MoOxSy/TiO2 nanostructures for the light expanded photocatalytic CO2 hydrogenation

  • Sanz-Marco, Arturo
  • Balas, Francisco
  • Hueso, José L.
  • Sebastián, Víctor
  • Santamaría, Jesús
Resumen del trabajo presentado a la XXXIX Reunión Bienal de la Real Sociedad Española de Química, celebrada en Zaragoza del 25 al 29 de junio de 2024., Research projects CTQ2016 77147R and PID2020-114926RB-I00., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High-radiance LED-driven fluidized bed photoreactor for the complete oxidation of n-hexane in air

  • Bueno-Alejo, C.J.
  • Hueso, J.L.
  • Mallada, R.
  • Julian, I.
  • Santamaria, J.
This work presents a highly efficient photo-reactor configuration for VOC abatement. It consists of a fluidized bed made of commercial, easy to fluidize, transparent borosilicate glass beads coated with commercial TiO2 nanoparticles (0.15–2.3 wt% loadings). Herein, we demonstrate that the use of high-radiance/low consumption UV-LEDs as irradiation sources with a deeper light penetration under fluidizing conditions facilitates the photocatalytic response to achieve the complete oxidation of VOCs. The role of different parameters such as catalyst loading and irradiation power have been thoroughly studied and evaluated to maximize the full combustion of n-hexane. Under the high radiance (up to 2200 mW/cm2) conditions used the bed heats significantly (up to 190 °C), although this did not have an effect on the conversions reached, which depended solely on the wavelength and power used. The productivity of the photoreactor tested and the space velocity used were around 5.25 × 10-2 mol/g·h and 12000 h-1 respectively.