Pasar al contenido principal

HACIA LA IMPLEMENTACION DEL CONCEPTO BIORREFINERIA Y LA AUTOSOSTENIBILIDAD ENERGETICA EN UNA DEPURADORA URBANA

CTQ2017-82404-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD AUTONOMA DE BARCELONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A critical evaluation of platinum deposition techniques for hydrogen production in microbial electrolysis cells

  • Sánchez Peña, Pilar|||0000-0002-7825-4890
  • Rodriguez, Jesús|||0000-0002-8601-0466
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Gabriel, David|||0000-0002-7713-4192
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Mireia|||0000-0002-2240-6410
Despite its high cost, Pt is the usual catalyst for hydrogen production in the cathode of Microbial Electrolysis Cells (MECs). Its effectiveness depends not only on the amount deposited but also on the availability and distribution of Pt nanoparticles on the cathode surface. This work provides a comprehensive study of the effectiveness of the Pt coating with five deposition techniques: spray, electrospray, brush painting, doctor blade and sputtering. The performance of the cathodes was studied with different Pt loadings by monitoring the current intensity and H2 production in MECs. Furthermore, cathodes were characterized morphologically using scanning electron microscopy together with energy-dispersive X-ray spectroscopy to study their Pt surface distribution and composition. Sputtering was initially discarded due to Pt detachment. When using the same amount of Pt (0.50 mg Pt cm-2), the highest current density was obtained for electrospray (2.0 mA cm-2), followed by spray (1.9 mA cm-2), brush painting (1.6 mA cm-2) and doctor blade (1.2 mA cm-2). Hence, electrospray improved 20 % the results obtained by the default method of brush painting. Electrospray and spray provided better performance because of the direct deposition of Pt on the carbon fibres creating a compact Pt layer on the electrode surface. Furthermore, it was observed that the cell performance decreased significantly with decreasing amount of Pt per cm2, observing the best performance with the highest Pt load tested (0.5 mg Pt cm-2) regardless of the deposition technique.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stratification of nitrifier guilds in granular sludge in relation to nitritation

  • Soler-Jofra, Aina|||0000-0002-6854-2784
  • Wang, Ru
  • Kleerebezem, Robbert
  • van Loosdrecht, Mark|||0000-0003-0658-4775
  • Pérez Cañestro, Julio|||0000-0002-0119-5570
A lab-scale partial nitritation granular sludge air-lift reactor was operated in continuous mode treating low strength synthetic medium (influent ca. 50 mg-N-NH /L). Granules were initially stratified with AOB in the external shell and NOB in the inner core at 20 °C. Once temperature was decreased progressively from 20 °C to 15 °C, nitrate production was initially observed during several weeks. However, by maintaining relatively high ammonium concentrations in the liquid (ca. 28 mg-N-NH /L), effluent nitrate concentrations in the reactor decreased in time and process performance was recovered. Batch tests were performed in the reactor at different conditions. To understand the experimental results an existing one-dimensional biofilm model was used to simulate batch tests and theoretically assess the impact of stratification, dissolved oxygen (DO) and short-term effects of temperature on time course concentrations of ammonium, nitrite and nitrate. This theoretical assessment served to develop an experimental methodology for the evaluation of in-situ batch tests in the partial nitritation reactor. These batch tests proved to be a powerful tool to easily monitor the extent of stratification of nitrifier guilds in granular sludge and to determine the required bulk ammonium concentration to minimize nitrite oxidation. When nitrifier guilds were stratified in the granular sludge, a higher bulk ammonium concentration was required to efficiently repress NOB at lower temperature (ca. 19 versus 7 mg-N-NH /L at 15 and 20 °C, respectively).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Comparing continuous and batch operation for high-rate treatment of urban wastewater

  • Rey-Martínez, Natalia|||0000-0003-1434-8596
  • Barreiro-López, Aloia
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
The water-energy nexus has changed the concept of wastewater treatment plants (WWTPs), which should move from energy consumers into energy neutral or even energy positive facilities. The A/B process aims at achieving self-sufficient energy WWTPs: organic matter is removed in the first step (A-stage) and derived to biogas production whereas autotrophic nitrogen removal is implemented in a second step (B-stage). This work compares two high-rate systems that can be used as A-stage in view of organic matter removal: a continuous high rate activated sludge (HRAS) reactor and a high-rate sequencing batch reactor (HRSBR). Both systems were operated with real urban wastewater at a short hydraulic retention time (2.5 h) and at short sludge retention time (SRT) of 1-2 d to minimize COD mineralization and to maximize organic matter diversion to methane production and, hence, energy recovery. The HRAS showed higher COD removal efficiencies and better energy recovery. On the other hand, the HRSBR was better to avoid undesired nitrification and provided lower COD mineralization for all the SRTs tested (ranging 20-48% for the HRSBR, and 41-58% for the HRAS). Then, the energy as methane recovered per unit of COD degraded was higher in the HRSBR. The HRSBR seems to be a good option, because the solids content in the effluent was similar for both systems and its COD removal efficiency can be further improved by optimizing the SBR cycle configuration.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nitrite and nitrate inhibition thresholds for a glutamate-fed bio-P sludge

  • Rey-Martínez, Natalia|||0000-0003-1434-8596
  • Merdan, Gökçe
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
Enhanced biological phosphorus removal (EBPR) is an efficient and sustainable technology to remove phosphorus from wastewater. A widely known cause of EBPR deterioration in wastewater treatment plants (WWTPs) is the presence of nitrate/nitrite or oxygen in the anaerobic reactor. Moreover, most existing studies on the effect of either permanent aerobic conditions or inhibition of EBPR by nitrate or free nitrous acid (FNA) have been conducted with a "Candidatus Accumulibacter" or Tetrasphaera-enriched sludge, which are the two major reported groups of polyphosphate accumulating organisms (PAO) with key roles in full-scale EBPR WWTPs. This work reports the denitrification capabilities of a bio-P microbial community developed using glutamate as the sole source of carbon and nitrogen. This bio-P sludge exhibited a high denitrifying PAO (DPAO) activity, in fact, 56% of the phosphorus was uptaken under anoxic conditions. Furthermore, this mixed culture was able to use nitrite and nitrate as electron acceptor for P-uptake, being 1.8 μg HNO-N·L the maximum FNA concentration at which P-uptake can occur. Net P-removal was observed under permanent aerobic conditions. However, this microbial culture was more sensitive to FNA and permanent aerobic conditions compared to "Ca. Accumulibacter"-enriched sludge.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coupling anammox and heterotrophic denitrification activity at mainstream conditions in a single reactor unit

  • Juan Díaz, Xènia|||0000-0002-0585-8669
  • Pérez Cañestro, Julio|||0000-0002-0119-5570
  • Carrera, Julian|||0000-0002-2599-2312
Mainstream partial nitritation/anammox (PN/AMX) has attracted large attention in the last decade. Two-stage configurations have been pointed out as an appealing technology for the application of the PN/AMX process at mainstream conditions. However, the process requires of an efficiency improvement by designing a new technology to remove the nitrate produced by anammox bacteria. A new reactor configuration was developed by coupling anammox to heterotrophic denitrification in a single reactor unit while avoiding competition between both processes. The addition of acetate as an external C-source allowed the removal of nitrate by heterotrophic microorganisms without hampering the anammox process by maintaining high nitrogen removal rates (0.16 ± 0.03 g N L-1 d-1) and nitrogen removal efficiencies (91 ± 8 %) (on average from acetate addition periods). Further, a proper organic load management showed to be effective to face the drawbacks derived from previous mainstream treatment stages (i.e. undesired nitrate production), without compromising effluent COD concentrations. By withdrawing samples along the sludge bed, nitrogen compounds and COD concentrations were determined at different reactor heights. This set of experimental data demonstrated that the combination of anammox and heterotrophic denitrification in a single reactor unit was possible as anammox activity dominated within bottom sludge bed sections, while heterotrophic denitrification occurred within middle and upper sludge sections. Microbial diversity results of 16S rRNA gene-targeted sequencing analyses confirmed that anammox and heterotrophic denitrifiers communities occupied two differentiated sludge bed sections along the reactor being dominated by Candidatus Brocadia (30 %) and Thauera (33 to 46 %), respectively. When heterotrophic denitrification occurred, the average N2O emissions with COD addition was ca. 50 % lower than that in periods without COD addition.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Microbial communities in an anammox reactor treating municipal wastewater at mainstream conditions, Practical implications of different molecular approaches

  • Oyarzúa Alarcón, Pía Karina|||0000-0002-0892-4174
  • Bovio-Winkler, Patricia|||0000-0002-4004-0416
  • Etchebehere, Claudia|||0000-0003-2495-205X
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
Biases on molecular techniques used to study microbial communities in the anammox process are not always considered. This work aimed to evaluate different molecular approaches to study bacterial communities in an anammox reactor treating real urban wastewater at mainstream conditions. 16S rRNA amplicon sequencing with different primer sets, metagenomics, and qPCR were evaluated. An enriched anammox reactor feed with synthetic wastewater was used as a positive control. We reported that, despite its in silico coverage, the universal primers 515F-909R had, in fact, very low coverage (1%) of the Planctomycetota phylum. The functional genes approach showed a taxonomic resolution at the species level, although genomic database updates are a bias to be considered. From the phylogenetic analysis, coherence among the approaches was obtained. Primers targeting anammox 16S rRNA and hydrazine synthase genes in qPCR showed consistency in the quantification, making them useful for comparing similar investigations. According to the results, recommendations on the biomolecular approach to be used were outlined.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ammonium oxidation activity promotes stable nitritation and granulation of ammonium oxidizing bacteria

  • Juan Díaz, Xènia|||0000-0002-0585-8669
  • Carrera, Julian|||0000-0002-2599-2312
  • Pérez Cañestro, Julio|||0000-0002-0119-5570
Two-stage partial nitritation/anammox (PN/AMX) processes have been pointed out as a feasible configuration for achieving mainstream anammox. For two-stage configurations, stable partial nitritation has been reported feasible in granular sludge reactors. This study aimed to explore the operating conditions involved in the development of an autotrophic aerobic granular sludge using floccular sludge as inoculum. The influence of different parameters such as free ammonia concentration, settling time, superficial gas flow velocity and ammonium oxidation rate was investigated. Enhancing ammonium oxidation activity since the early phase of the operation (i.e. using conventional activated sludge as inoculum enriched with a fraction of a floccular nitrifying biomass) promoted a fast development (ca. 30 days) of an autotrophic aerobic granular sludge performing stable nitritation. When the seeded sludge presented a low nitrifying activity (lower than 0.1 g N L-1 d-1), the increase of the air-flow rate triggered the formation of an autotrophic aerobic granular sludge since ammonium oxidation activity was promoted. Contrarily, imposing low settling times (10 min) or strong free ammonia inhibitory conditions (FA concentrations higher than 50 mg N L-1) were shown to negatively influence the achievement of high ammonium oxidation rates, hampering the development of an autotrophic aerobic granular sludge. This study demonstrated the importance of ensuring high ammonium oxidation rates (higher than 0.2 g N L-1 d-1) for the proper development of an autotrophic partial nitritation granular sludge.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impact of the nitrifying community dynamics on the partial nitritation process performed by an AOB-enriched culture in a granular sludge airlift reactor

  • Reino, Clara|||0000-0003-3378-3542
  • Carrera, Julian|||0000-0002-2599-2312
One of the main challenges for the full-scale implementation of the autotrophic biological nitrogen removal process is to achieve a stable long-term partial nitritation under the mainstream conditions of urban wastewater treatment plants. Here, the performance of partial nitritation process under mainstream conditions was investigated based on the change of the nitrifying community developed. A lab-scale airlift reactor was operated for 430 days with a granular sludge highly enriched in ammonia oxidizing bacteria (AOB) performing partial nitritation treating a mainstream-mimicked synthetic influent. The changes in solid retention time (SRT), dissolved oxygen (DO) concentration and temperature strongly affected to the microbial community developed, especially to the dynamics of the nitrite oxidizing bacteria (NOB) population, which triggered to instabilities in the partial nitritation process. The extremely high values of SRT applied (SRT = ∞) and long-term exposure to low temperature (10 °C) promoted the growth of NOB Nitrotoga genus and development of nitratation activity; and the subsequent variability in temperature (between 10 and 30 °C) and in DO concentration (between 0.4 ± 0.1 and 1.4 ± 0.3 mg O2 L-1) influenced the competitiveness between nitrifiers and the growth of species previously undetected in the culture, as Nitrospira genus. Anaerobic ammonia oxidizing bacteria were also identified during cultivation and assisted to the repression of the NOB activity at 25-15 °C. The results of the present study uphold that understanding the niche differentiation and competitiveness of NOB will be key to develop strategies for NOB repression in order to make possible full-scale implementation of partial nitritation process at mainstream conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effective dampening of temperature effects in an anammox reactor treating real mainstream wastewater

  • Juan Díaz, Xènia|||0000-0002-0585-8669
  • Pérez Cañestro, Julio|||0000-0002-0119-5570
  • Carrera, Julian|||0000-0002-2599-2312
The aim of the present study was to evaluate the capability of an up-flow anammox sludge bed reactor (13 L) of dampening a 10 ◦C temperature drop at mainstream conditions while operating at constant nitrogen loading rates (0.11 ± 0.01 g N L- 1 d- 1). The up-flow anammox sludge bed reactor was fed with an aerobically pre-treated mainstream wastewater. The reactor temperature was controlled as to mimic a (realistic) summer-to-winter transition from 20 to 10 ◦C plus a three months period at 10 ◦C. During the 350 days of operation, the average nitrogen removal rate remained high (0.10 ± 0.01 g N L- 1 d- 1), indicating that the 10 ◦C drop did not affect the overall efficiency of the reactor. This can be explained as anammox activity differed among the different sludge bed sections. At 20 ◦C, anammox activity was mainly located at the bottom of the sludge bed. At 10 ◦C, the anammox activity decrease of the bottom sludge bed was compensated by an activity increase within the upper sludge bed sections. The contribution of heterotrophic denitrifying activity to the total nitrogen removal rate was assessed to be 3-to-5 times lower than that of anammox, even at 10 ◦C. Microbial community of 16S rRNA gene-targeted sequencing analyses resulted in the identification of an uncharacterized Planctomycetes in high numbers. This study demonstrated that the low temperatures should not be an obstacle for the feasibility of anammox bacteria in the main water line of an urban wastewater treatment plant.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Less is more, a comprehensive study on the effects of the unmber of gas diffusion layers on air-cathode microbial fuel cells

  • Sánchez Peña, Pilar|||0000-0002-7825-4890
  • Rodriguez, Jesús|||0000-0002-8601-0466
  • Montes, Raquel|||0000-0001-8805-9987
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Gabriel, David|||0000-0002-7713-4192
  • Baeza, Mireia|||0000-0002-2240-6410
  • Guisasola, Albert|||0000-0002-3012-7964
Air-cathode microbial fuel cells (AC-MFC) use a gas-diffusion-layer (GDL) coating based on polytetrafluoroethylene applied to the cathode to prevent electrolyte leakage. However, this type of GDL can also lead to a decrease in MFC performance due to electron-transfer limitation, mass-transfer limitation or catalyst availability. This study provides a comprehensive understanding of the significance of the GDL coating, demonstrating the interaction between the number of GDL coatings and the external resistance (Rext) used. An experimental design in 28 mL AC-MFCs was prepared and conducted using two different Rext (10 and 249 Ω) and four different GDL coatings (1 to 4 layers). The coating effect was not significant when operating with a high Rext, where the electron transfer was the limiting process. However, when the Rext was low, the amount of polytetrafluoroethylene limited the cathode performance due to a significant decrease in the Pt availability on the catalytic surface. Thus, GDL-1 with 10 Ω as Rext reached 0.96 mA/cm2, 3-fold higher than that obtained with 249 Ω as Rext (ca. 0.30 mA/cm2). Besides, the current density did not vary noticeably in the other cathodes with 249 Ω as Rext. Contrarily, the current density with 10 Ω as Rext decreased as the number of GDL increased (0.74, 0.57 and 0.37 for GDL-2, GDL-3 and GDL-4 respectively). These values agreed with those of the polarization curve. Furthermore, limitations were also observed in electrochemical impedance spectroscopy measurements: the charge resistance increased with the number of GDL, related to the ease of electron flow. These values were18 Ω, 22 Ω, 53 Ω and 58 Ω for GDL-1, GDL-2, GDL-3 and GDL-4, respectively, for both 10 and 249 Ω cathodes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Graphene functionalization with metallic Pt nanoparticles, A path to cost-efficient H2 production in microbial electrolysis cells

  • Sánchez Peña, Pilar|||0000-0002-7825-4890
  • Rodriguez, Jordi
  • Gabriel, David|||0000-0002-7713-4192
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Mireia|||0000-0002-2240-6410
Platinum is one of the most widely used catalysts in the cathode of Microbial Electrolysis Cells (MECs) to overcome the relatively slow kinetics of hydrogen evolution, even though it is not economically feasible on a large scale. This work aims at developing, applying, characterizing, and optimizing two novel Pt-functionalized inks with promising characteristics: Pt@rGO based on reduced graphene oxide and Pt@Graphitene based on a home-made material named Graphitene, which showed improved performance at a lower cost. The Pt-functionalized materials were deposited on carbon cloth and used as cathode electrode in a single chamber MEC. These materials provided 47% increase in Pt functionalization over commercial inks. Moreover, surface areas of 10.76 m/g and 24.40 m/g and electroactive areas of 0.10 cm/cm and 0.16 cm/cm were determined for Pt@Graphitene and Pt@rGO, respectively, a difference caused by structural defects in the case of the Pt@rGO, which slightly improved its performance compared to Pt@Graphitene. Thus, the experimental results reached ca. 0.8 mA/cm, a 43% higher intensity than that obtained using conventional commercial inks.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A review on the integration of mainstream P-recovery strategies with enhanced biological phosphorus removal

  • Zhang, Congcong|||0000-0003-3693-4705
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
Phosphorus (P), an essential nutrient for all organisms, urgently needs to be recovered due to the increasing demand and scarcity of this natural resource. Recovering P from wastewater is a feasible and promising way widely studied nowadays due to the need to remove P in wastewater treatment plants (WWTPs). When enhanced biological P removal (EBPR) is implemented, an innovative option is to recover P from the supernatant streams obtained in the mainstream water line, and then combine it with liquor-crystallisation recovery processes, being the final recovered product struvite, vivianite or hydroxyapatite. The basic idea of these mainstream P-recovery strategies is to take advantage of the ability of polyphosphate accumulating organisms (PAO) to increase P concentration under anaerobic conditions when some carbon source is available. This work shows the mainstream P-recovery technologies reported so far, both in continuous and sequenced batch reactors (SBR) based configurations. The amount of extraction, as a key parameter to balance the recovery efficiency and the maintenance of the EBPR of the system, should be the first design criterion. The maximum value of P-recovery efficiency for long-term operation with an adequate extraction ratio would be around 60%. Other relevant factors (e.g. COD/P ratio of the influent, need for an additional carbon source) and operational parameters (e.g. aeration, SRT, HRT) are also reported and discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Review about bioproduction of Volatile Fatty Acids from wastes and wastewaters, Influence of operating conditions and organic composition of the substrate

  • Vázquez-Fernández, Ana|||0000-0002-9690-229X
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
  • Carrera, Julian|||0000-0002-2599-2312
Volatile fatty acids (VFAs) are a group of carboxylic acids considered as building block chemicals. Nowadays, commercial production of VFAs is performed using fossil fuel sources. As an alternative, acidogenic fermentation of wastes by mixed microbial cultures (MMC) is starting to be considered as a potential bioproduction process that would replace conventional production processes and contribute to the circular economy. Nevertheless, more research is needed to control the VFA production yields and to precisely drive the fermentation process to the production of a certain VFA or a mixture of VFAs, either by modifying the operational parameters or by appropriately tunning the substrate composition. Following this gap, this review starts screening the metabolic routes that yield VFAs by anaerobic fermentation. Subsequently, the effect of different operational parameters on VFA production yield and VFA composition distribution is extensively discussed depending on the organic composition of the waste in terms of proteins, carbohydrates and lipids. To the best of our knowledge, previous review articles analyzed the impact of these parameters for different types of wastes, but without specifically considering their organic composition in terms of proteins, carbohydrates and lipids. Afterwards, energy-based metabolic models are presented as the one of the best modelling approaches to predict VFA composition. Then, polyhydroxyalkanoates (PHAs) production by MMC is described since it is one of the most promising applications of waste derived VFAs. Finally, we highlight the research gaps that should be further investigated to develop a large scale VFA bioprocess based on MMC platform from waste streams.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Increasing resource circularity in wastewater treatment, Environmental implications of technological upgrades

  • Rufí Salís, Martí|||0000-0003-3696-1033
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Leipold, Sina|||0000-0001-5245-183X
  • Villalba, Gara|||0000-0001-6392-0902
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Moliné, Eduard
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Carrera, Julian|||0000-0002-2599-2312
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
A paradigm shift is needed in wastewater treatment plants (WWTPs) to progress from traditional pollutant removal to resource recovery. However, whether this transformation produces overall environmental benefits will depend on the efficient and sustainable use of resources by emerging technologies. Given that many of these technologies are still being tested at the pilot scale, there is a lack of environmental assessments quantifying their impacts and benefits. In particular, an integrated approach to energy and nutrient recovery can elucidate the potential configurations for WWTPs. In this study, we conduct a life cycle assessment (LCA) of emergent wastewater treatment technologies aimed at increasing resource circularity in WWTPs. We focus on increasing energy self-sufficiency through biogas upgrades and a more radical circular approach aimed at nutrient recovery. Based on a case-study WWTP, we compare its current configuration with (1) implementing autotrophic nitrogen removal in the mainstream and deriving most of the organic matter for biogas production, which increases the quality and quantity of biogas available for energy production; (2) implementing struvite recovery through enhanced biological phosphorus removal (EBPR) as a radical approach to phosphorus management, offering an alternative to mineral fertilizer; and (3) a combination of both approaches. The results show that incremental changes in biogas production are insufficient for compensating for the environmental investment in infrastructure, although autotrophic nitrogen removal is beneficial for increasing the quality of the effluent. Combined phosphorus and energy recovery reduce the environmental impacts from the avoided use of fertilizers and phosphorus and the nitrogen release into water bodies. An integrated approach to resource management in WWTPs is thus desirable and creates new opportunities toward the implementation of circular strategies with low environmental impact in cities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Exploring the stability of an A-stage-EBPR system for simultaneous biological removal of organic matter and phosphorus

  • Zhang, Congcong|||0000-0003-3693-4705
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
This work evaluates the performance and stability of a continuous anaerobic/aerobic A-stage system with integrated enhanced biological phosphorus removal (A-stage-EBPR) under different operational conditions. Dissolved oxygen (DO) in the aerobic reactor was tested in the 0.2-2 mgDO/L range using real wastewater amended with propionic acid, obtaining almost full simultaneous COD and P removal without nitrification in the range 0.5-1 mgDO/L, but failing at 0.2 mgDO/L. Anaerobic purge was tested to evaluate a possible mainstream P-recovery strategy, generating a P-enriched stream containing 22% of influent P. COD and N mass balances indicated that about 43% of the influent COD could be redirected to the anaerobic digestion for methane production and 66% of influent NH4+-N was discharged in the effluent for the following N-removal B-stage. Finally, when the system was switched to glutamate as sole carbon source, successful EBPR activity and COD removal were maintained for two months, but after this period settleability problems appeared with biomass loss. Microbial community analysis indicated that Propionivibrio, Thiothrix and Lewinella were the most abundant species when propionic acid was the carbon source and Propionivibrio was the most favoured with glutamate. Thiothrix, Hydrogenophaga, Dechloromonas and Desulfobacter appeared as the dominant polyphosphate-accumulating organisms (PAOs) under different operation stages.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nitrite pathway in A2/O WWTPs, Modelling organic matter reduction, operational cost and N2O emissions

  • Gaona, Àlex|||0000-0002-6912-5333
  • Solis Duran, Borja|||0000-0003-0305-6168
  • Guerrero, Javier|||0000-0003-2902-4893
  • Guisasola, Albert|||0000-0002-3012-7964
  • Baeza, Juan Antonio|||0000-0003-1290-1669
Deciding whether the implementation of the nitrite pathway is useful for the treatment of a given wastewater depends on several criteria such as organic matter availability, N and P removal, N2O emissions and operational costs. This work is a simulation-based study with a conventional Anaerobic/Anoxic/Oxic (A2/O) WWTP where the nitrite pathway can be implemented. The outcomes are general correlations to calculate the minimum COD requirements for a certain influent and a practical decision tree on the opportunities of nitrite pathway in A2/O WWTPs as a function of the influent wastewater composition (for P and N concentrations in the ranges 3-11 mgPO4 -3-P·L-1 and 20-60 mg NH4 +-N·L-1). This study shows that the implementation of the nitrite pathway reduces the COD requirements (depending on the influent, between 9 and 68%). It also can lead to a reduction in aeration costs. For an equivalent COD in the influent, the implementation of the nitrite pathway compared to the nitrate pathway results in a reduction of 41-47% in aeration costs and similar sludge production, leading to a reduction in the operational cost index of 10-16%. However, it is essential to note that this strategy can also lead to increased N2O emissions, with an emission factor for the nitrite pathway in the range of 2.5-17 times that of the nitrate pathway.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Systematic screening of carbon-based anode materials for bioelectrochemical systems

  • Ul Kausar, Zainab|||0000-0002-2007-2277
  • Sánchez Peña, Pilar|||0000-0002-7825-4890
  • Baeza, Mireia|||0000-0002-2240-6410
  • Sulonen, Mira Lotta Kristiina|||0000-0003-4812-3360
  • Gabriel, David|||0000-0002-7713-4192
  • Baeza, Juan Antonio|||0000-0003-1290-1669
  • Guisasola, Albert|||0000-0002-3012-7964
BACKGROUND: The anode material of bioelectrochemical systems (BES) is crucial because its characteristics directly affect electron transfer from the bacteria to the anode. To assess its usefulness, each material must undergo evaluation under relevant operating conditions, as well as a complete electrochemical characterization. RESULTS: Five carbonaceous materials - carbon brush (CB), carbon granules (CG), thicker carbon felt (CF1), high-conductivity carbon felt (CF2), and high-active-area carbon felt (CF3) - anodes were tested in this work. The current generation with each anode material was studied, operating as a microbial fuel cell (MFC) and microbial electrolysis cell (MEC). Two MFC inoculation strategies were tested: (i) fixed 10 Ω external resistance (ER) and (ii) poised anode potential (PA) of 200 mV versus Ag/AgCl. Once reproducible cycles were obtained in MFC operation, CB yielded the highest maximum current density, amounting to 15.9 A m-2. A slightly reduced start-up time was observed for each anode with PA than ER. When the anodes were transferred to MEC operation, the maximum hydrogen production rate of 1.04 m3 H2 m-3 d-1 was obtained for CB. CONCLUSION: This study helps in selecting anode material for BES, allowing a shortening of the start-up time and improving its performance using different inoculation strategies and anode materials. Among all the anode materials employed in this study, CB and CF3 electrodes presented the best overall performance.