Pasar al contenido principal

XEROGELES HIBRIDOS PARA LA SEPARACION Y PURIFICACION DE BIOMOLECULAS

CTQ2017-87820-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of conductive additives on the performance of hybrid carbon xerogels as electrodes in aqueous supercapacitors

  • Canal Rodríguez, María
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
  • Martín Gullón, Ignacio
  • Parra Soto, José Bernardo
  • Arenillas de la Puente, Ana
Three different hybrid carbon xerogels containing Graphene Oxide (AXGO), Micronized Graphite (AXMG) and Carbon Black (AXCB) were synthesized using an easy, fast and affordable method. These three additives were initially selected to improve the electrical conductivity of the pristine activated carbon xerogel (AX) thus expecting to improve its performance in aqueous supercapacitors. Capacitances of the corresponding devices were measured as a function of current density and results of the high and low charge transfer regime of the supercapacitors were discussed separately. In both regimes, the differences observed between the hybrid electrodes were analyzed on the basis of the concurrent influence of the micro and mesoporosity, surface chemistry and electrical conductivity of the materials. Accordingly, even though all the hybrid carbon xerogels showed higher electrical conductivities, only AXGO rendered a better performance than AX, showing the highest capacitances in the whole interval of intensities studied. Consequently, at 16 A g−1, the energy and power densities of the AXGO supercapacitors increased up to 16% and 97%, respectively, with respect to AX, and of 143% and 409%, respectively, with respect to a commercial activated carbon used as reference. The performance of AXCB and, especially AXMG was worse than AX supercapacitors due to a combination of inadequate pore size distributions and/or a poor surface chemistry. Finally, TEM analysis helped to understand the different way the three additives were affecting the nanostructure (and final properties) of the hybrid carbon xerogels., Authors gratefully acknowledge the financial support from the Ministerio de Economía, Industria y Competitividad from Spain (Project CTQ2017-87820-R). MCR also acknowledges CSIC (Project I.E. 201880E010)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The relevance of conductive additive addition methodology for optimizing the performance of electrodes based on carbon xerogels in aqueous supercapacitors

  • Canal Rodríguez, María
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
  • Arenillas de la Puente, Ana
Electrodes for supercapacitors are commercially produced by mixing active material with a conductive additive and a binder. However, with some polymers such as carbon xerogels the conductive additives can be added during their synthesis in order to enhance interactions between the components of the electrode. In this work the performance in aqueous supercapacitors of a carbon xerogel and carbon black or graphene added during and post synthesis is compared. It was observed that, the more integrated the additive is within the carbon xerogel polymeric structure, the greater the differences in the final performance of the hybrid materials, being the sample with graphene oxide added during the synthesis of the organic gel the one with the best performance throughout the whole range of current densities studied., The authors gratefully acknowledge the financial support received from the Ministerio de Economía, Industria y Competitividad from Spain (Project CTQ2017-87820-R). MCR also acknowledges the support from CSIC (Project I.E. 201880E010)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiphase graphitisation of carbon xerogels and its dependence on their pore size

  • Canal Rodríguez, María
  • Ramírez Montoya, Luis Adrián
  • Fernández Villanueva, Sara
  • Flores-López, Samantha L.
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
Six carbon materials were obtained from the carbonisation of resorcinol/formaldehyde xerogels. All carbon xerogels (CXs) showed essentially the same microporosity but differed in their meso- or macroporosity, covering a wide interval of average meso- or macropore sizes from 10 nm to 3000 nm. The graphitisation of the CXs was heterogeneous, as detected by X-ray diffraction. The relative amount of the amorphous, turbostratic and graphitic carbon phases on the graphitised xerogels was different depending on the pore size of the CXs. Crystalline parameters such as interlayer spacings (d002) and crystallite sizes along the c-axis (Lc) were calculated from the different contributions and were also found to depend on the pore size of the parent CXs. Transmission electron microscopy and Raman spectroscopy analyses helped to identify nanostructures that could be assigned to the three carbon components of the graphitic xerogels. The occurrence of most of these nanostructures was compatible with a solid-phase transformation of the amorphous precursor. The electrical conductivity of the graphitised xerogels also depended on their original pore size, with values ranging from 2 S cm−1 for the materials with a 10 nm pore size to 18 S cm−1 for the materials with bigger pore sizes., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advantages of microwave-assisted synthesis of silica gels

  • Flores-López, Samantha L.
  • Fernández Villanueva, Sara
  • Montes Morán, Miguel Ángel
  • Cruz, Guillermo
  • Garrido, Julián J.
  • Arenillas de la Puente, Ana
The sol-gel process is a commonly used methodology for producing silica gels with tailored textural properties. However, the full conventional procedure involves several steps and is complicated and time-consuming, preventing production on a large scale. In the present study, as a more practical approach, microwave heating was applied via the acid-base synthesis of different precursor mixtures. By evaluating the effect of microwaves at each synthesis step, optimal pathways were established resulting in considerable time-saving. Mesoporous gels with porosities of around 70 per cent were obtained with a reduction in time consumption of more than 90 per cent compared to conventional methods. Strict control of the production stages has led to a much better understanding of the contribution of each stage to the overall process, making it possible to much more accurately evaluate the effects of applying microwave technology on the final properties of the materials with a view to optimizing their production., The authors gratefully acknowledge the financial support received from the Ministerio de Economía, Industria y Competitividad from Spain (Project CTQ2017-87820-R) and Principado de Asturias–FICYT-FEDER (Project PCTI-Asturias IDI/2018/000118). SFL is also grateful to Administración del Principado de Asturias for her research training grant awarded through “Severo Ochoa” program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Well-defined meso/macroporous materials as a host structure for methane hydrate formation: Organic versus carbon xerogels

  • Cuadrado-Collados, C.
  • Farrando-Pérez, Judit
  • Martínez-Escandell, M.
  • Ramírez Montoya, Luis Adrián
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
  • Silvestre-Albero, J.
A series of xerogels with a properly designed porous structure and surface chemistry have been synthesized and evaluated as a host structure to promote the nucleation and growth of methane hydrates. Organic xerogels (OGs) have been synthesized from resorcinol-formaldehyde mixtures using a sol-gel approach and microwave heating. These xerogels are hydrophilic in nature and possess designed meso/macrocavities in the pore size range 5–55 nm. Carbon xerogels (CGs) have been synthesized from their organic counterparts after a carbonization treatment at high temperature. Interestingly, the carbonization process does not alter/modify substantially the porous network of the parent xerogels, while developing new micropores. Under water-supplying conditions, the two types of xerogels exhibit a large improvement in the methane adsorption capacity compared to the pure physisorption process taking place in dry conditions (up to 200% improvement), and associated with a significant hysteresis loop. These excellent values must be associated with the promoting effect of these xerogels in the water-to-hydrate conversion process. The comparison of OGs and CGs as a host structure anticipates that surface chemistry, total pore volume and pore size are critical parameters defining the extent and yield of the methane hydrate formation process., Authors would like to acknowledge financial support from the MINECO (projects MAT2016-80285-p and CTQ2017-87820-R). Principado de Asturias-FICYT-FEDER (Project PCTI-Asturias IDI/2018/000118) is also acknowledged. L.A. Ramírez-Montoya thanks CONACyT, México, for a post-doctoral grant (CVU No 330625, 2017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of porous structure on doping and the catalytic performance of carbon xerogels towards the oxygen reduction reaction

  • Canal Rodríguez, María
  • Rey Raap, Natalia
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
  • Figueiredo, José Luís
  • Pereira, Manuel Fernando R.
  • Arenillas de la Puente, Ana
The development of new electrocatalysts based on carbon materials lies in the appropriate design of their physico-chemical properties. The porous structure of the carbon xerogels is expected to have a direct effect on the subsequent processes used to further design the properties. Hence, it is essential to understand how the porous structure can affect the efficiency of the doping method and change the catalytic performance. To this end, carbon xerogels with different micropore volumes and electrical conductivities were prepared by applying different treatments (carbonization, activation and graphitization) to a macroporous organic xerogel synthesized by microwave heating. Nitrogen functionalities and iron nanoparticles were introduced into the carbonaceous structures. Doped and un-doped materials were tested as electrocatalysts for the oxygen reduction reaction. The amount of nitrogen introduced into the carbon structure decreases as the degree of order increases, while the type of nitrogen functional groups depends on the porous structure: higher volume of micropores allows the incorporation of quaternary nitrogen. Catalytic sites are mainly located in the micropores, macroporosity facilitates the access of the reactants, and nitrogen functionalities shift the mechanism of the reaction to the four-electron pathway. The addition of iron particles allows achieving the same performance as that of the platinum-based reference material., The authors gratefully acknowledge the financial support received from the Ministerio de Economía, Industria y Competitividad from Spain (Project CTQ2017-87820-R) and Principado de Asturias–FICYT-FEDER (Project PCTI-Asturias IDI/2018/000118). MCR also acknowledges the support from CSIC (Project I.E. 201880E010). This work was also partially supported by the projects “UniRCell”, with the reference POCI-01-0145-FEDER-016422, and by Associate Laboratory LSRE-LCM - UID/EQU/50020/2019 - funded by national funds through FCT/MCTES (PIDDAC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nuevos materiales compuestos basados en silicio-xerogel para baterías de ion litio

  • Santos-Gómez, Lucía dos
  • Montes Morán, Miguel Ángel
  • García, José R.
  • García-Granda, Santiago
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
Resumen del trabajo presentado al V Workshop de la Red E3TECH / I Workshop Iberoamericano a Distancia E3TECH: “Aplicaciones Medioambientales y Energéticas de la Tecnología Electroquímica”, celebrado de forma telemática del 28 al 31 de octubre de 2020., Este trabajo ha sido financiado por el Ministerio de Economia, Industria y Competitividad de España (CTQ2017-87820-R y MAT2016-78155-C2-1-R) y El Principado de Asturias (FICYT-FEDER: IDI/2018/000118 y IDI/2018/000170). Lucía dos Santos-Gómez agradece al Ministerio de Ciencia, Innovación y Universidades por su beca Juan de la Cierva Formación (FJC2018-036746-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Graphene aerogels: A simultaneous combination of both high porosity and large electrical conductivity in a single material

  • Santos-Gómez, Lucía dos
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • García, José R.
  • García-Granda, Santiago
  • Arenillas de la Puente, Ana
Trabajo presentado a la 2nd International Online-Conference on Nanomaterials (IOCN), celebrada del 15 al 30 de noviembre de 2020., This work has been supported by CTQ2017-87820-R, MAT2016-78155-C2-1-R, IDI/2018/000118 and IDI/2018/000170 research grant (Spain). L. dos Santos-Gómez thanks the Ministerio de Ciencia, Innovación y Universidades for her Juan de la Cierva Formación grant (FJC2018-036746-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of carbon fibers arrays by the sol-gel process

  • Flores-López, Samantha L.
  • Fernández Villanueva, Sara
  • Montes Morán, Miguel Ángel
  • Arenillas de la Puente, Ana
This study presents a new route for the synthesis of carbon gels with a structure that includes aligned fibers of the same material. A modification of the heating process during polymerization of resorcinol and formaldehyde produces a combination of the classical polymeric nodules in carbon gels with arrays of totally aligned fibers. This new morphology, produced through a very simple process, opens up new application possibilities to the already numerous existing ones for carbon gels., We are grateful to the Spanish Ministerio de Economia, Industria y Competitividad (CTQ2017-87820-R) and the Principality of Asturias–FICYT-FEDER(IDI/2018/000118) for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the porosity and microstructure on the mechanical properties of organic xerogels

  • Flores-López, Samantha L.
  • Karakashov, B.
  • Ramírez Montoya, Luis Adrián
  • Menéndez Díaz, José Ángel
  • Fierro, Vanessa
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
  • Celzard, A.
The synthesis of resorcinol–formaldehyde (RF) xerogels is versatile enough to provide materials with custom pore size distributions in the meso-/macroporous range. Specifically, seven xerogels were synthesised by changing the pH of the same RF solution, from pH 3 to pH 6. The resulting materials presented meso-/macroporous size distributions with average pore sizes from  < 5 to 510 nm, as determined by Hg intrusion and N2 adsorption. Most of the RF xerogels had very similar geometric densities, except for the gels obtained at the two highest pH values, which were more dense. Both flexural and uniaxial compression tests were carried out to determine the dependence of strength and stiffness on the porosity of the xerogels. The results followed a power-law relationship between the mechanical properties and the density of the materials. However, two series of RF xerogels were found to fit such law independently, with the gels obtained at the three most acidic pH values (pH 3–4) showing unexpectedly high compression moduli. Further characterisation of the xerogels microstructure revealed the existence of rod-like microstructures that would bear most loads during the compression tests. These microstructures would act as struts that, once broken, would cause the catastrophic failure (bursting) of the xerogel., The authors gratefully acknowledge the financial support received from the Consejo Superior de Investigaciones Científicas (Project I-LINK1200), Ministerio de Economía, Industria y Competitividad (Project CTQ2017-87820-R) and Principado de Asturias– FICYT-FEDER (Project PCTI-Asturias IDI/2018/000118)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Designing carbons for electrochemical applications

  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
Authors thank the financial support received from the Ministerio de Economia, Industria y Competitividad from Spain (CTQ2017-87820-R) and PCTI-Asturias-FEDER (Project IDI/2018/000118).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modulating the degree of structural ordering of carbon gels

  • Canal Rodríguez, María
  • Ramírez Montoya, Luis Adrián
  • Fernández Villanueva, Sara
  • Flores-López, Samantha L.
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
Authors thank the financial support received from the Ministerio de Economia, Industria y Competitividad from Spain (CTQ2017-87820-R) and PCTI-Asturias-FEDER (Project IDI/2018/000118).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Determining the role of pore size in carbons for the photocatalytic degradation of organic pollutants uder solar irradiation

  • Arenillas de la Puente, Ana
  • Menéndez Díaz, José Ángel
  • Matos, J.
Authors thank the financial support received from the Ministerio de Economia, Industria y Competitividad (CTQ2017-87820-R) and PCTI-Asturias-FEDER (Project IDI/2018/000118) from Spain. J. Matos acknowledges the Chilean projects: CONICYT-FONDECYT 1190591, CONICYT PIA/APOYO CCTE AFB170007, and the Millennium Science Initiative of the Ministry of Economy, Development and Tourism, Chile, grant Nuclei on Catalytic Processes towards Sustainable Chemistry (CSC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Tortuosity of the porous structure of carbon gels

  • Flores-López, Samantha L.
  • Ramírez Montoya, Luis Adrián
  • Casal Banciella, María Dolores
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
Authors thank the financial support received from the Ministerio de Economia, Industria y Competitividad from Spain (CTQ2017-87820-R) and PCTI-Asturias-FEDER (Project IDI/2018/000118).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Carbon xerogels for the removal and photodegradation of yellow-5 uner solar irradiation

  • Matos, J.
  • Arenillas de la Puente, Ana
  • Menéndez Díaz, José Ángel
Authors thank the financial support received from the Ministerio de Economia, Industria y Competitividad (CTQ2017-87820-R) and PCTI-Asturias-FEDER (Project IDI/2018/000118) from Spain. J. Matos acknowledges the Chilean projects: CONICYT-FONDECYT 1190591, CONIC T PIA/APOYO CCTE AFB170007, and the Millennium Science Initiative of the Ministry of Economy, Development and Tourism, Chile, grant Nuclei on Catalytic Processes towards Sustainable Chemistry (CSC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Influence of polymerization conditions on carbon xerogels porous structure

  • Flores-López, Samantha L.
  • Ramírez Montoya, Luis Adrián
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
  • Arenillas de la Puente, Ana
Authors thank the financial support received from the Ministerio de Economia, Industria y Competitividad from Spain (CTQ2017-87820-R) and PCTI-Asturias-FEDER (Project IDI/2018/000118).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Utilization of whey for the synthesis of nitrogen doped carbon xerogel supercapacitors

  • Ramírez Montoya, Luis Adrián
  • Fernández Villanueva, Sara
  • Llamas-Unzueta, Raúl
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
Authors thank the financial support received from the Ministerio de Economía, Industria y Competitividad from Spain (CTQ2017-87820-R) and PCTI-Asturias-FEDER (Project IDI/2018/000118).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Organic and carbon gels. From the laboratory to the industry?

  • Arenillas de la Puente, Ana
  • Menéndez Díaz, José Ángel
  • Reichenauer, Gudrun
  • Celzard, Alain
  • Fierro, Vanessa
  • Maldonado Hodar, Francisco José
  • Bailόn-Garcia, Esther
  • Job, Nathalie
Since the first report on organic gels based on the polycondensation of resorcinol with formaldehyde presented by Pekala in 1989, the number of publications, on both organic gels and carbon gels has experimented an enormous increase to the point where nowadays are published every year more than a hundred papers covering topics ranging from variations in the synthesis to the potential applications of this vast family of porous materials. This is due to the fact that, by controlling the synthesis conditions, it is possible to obtain materials with a suitable porosity for a specific application and even also with predetermined chemical properties, something that is practically impossible to achieve with any other porous materials. However, even after almost 30 years of continuous researching at laboratory scale, their industrial production and commercialization are still marginal compared with that of competitive materials. This chapter summarizes how the physicochemical properties of organic and carbon gels can be designed by controlling all the variables involved in the synthesis process. The chapter also addresses the most challenging problem of their mass production, i.e., scaling-up of production methods currently used in the labs., The authors gratefully acknowledge the financial support of the Ministerio de Economía Industria y Competitividad of Spain, FDER funds, and the Research State Agency (Project CTQ2017-87820-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Whey-derived porous carbon scaffolds for bone tissue engineering

  • Llamas-Unzueta, Raúl
  • Suárez, Marta
  • Fernández, Adolfo
  • Díaz, Raquel
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
This article belongs to the Special Issue Bio-Inspired Porous Materials and Biomaterials., Porous carbon structures derived from whey powders are described and evaluated as potential scaffolds in bone tissue engineering. These materials have a porosity between 48% and 58%, with a hierarchical pore size distribution ranging from 1 to 400 micrometres. Compressive strength and elastic modulus are outstanding for such a porous material, being up to three times better than those of traditional HA or TCP scaffolds with similar porosities. They also present non-cytotoxic and bioactive behavior, due to their carbon-based composition that also includes some residual mineral salts content., This research was funded by MINECO and MICINN, grant numbers CTQ2017-87820-R and PID2020-115334GB-I00, respectively; and Principado de Asturias–FICYT-FEDER, grant number IDI/2018/000118. Raúl Llamas thanks the Spanish National Research Council (CSIC) for funding received through the Project PIE 202080E276., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultralight-weight graphene aerogels with extremely high electrical conductivity

  • Santos-Gómez, Lucía dos
  • García, José R.
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
  • García-Granda, Santiago
  • Arenillas de la Puente, Ana
The integration of 2D graphene sheets into a porous and macroscopic structure is extremely attractive for application in several electrochemical fields. In this regard, for the first time, the synthesis of 3D graphene aerogels is reported by using a rapid, easy, cost-effective, and scalable at industrial level methodology. These aerogels integrate the intrinsic properties of graphene with a high pore volume. To achieve this ultraporous graphene network, resorcinol/formaldehyde polymer with controllable porosity is employed as a binder and a cross-linker material, and a graphene oxide solution provides the graphene building blocks. Two series of materials with and without catalyst for resorcinol/formaldehyde reaction and with different synthesis conditions and graphene contents are studied. The resulting graphene aerogels present low density, large macroporosity, and electrical conductivity values as high as 852 S m−1, with 97.58% of porosity, which is the highest value of electrical conductivity reported so far in the literature for ultralight-weight graphene aerogels., This work was supported by the Ministerio de Economía, Industria y Competitividad from Spain (CTQ2017-87820-R and MAT2016-78155-C2-1-R) and Principado de Asturias—FICYT-FEDER (IDI/2018/000118 and IDI/2018/000170). L.d.S.-G. thanks the Ministerio de Ciencia, Innovación y Universidades for her Juan de la Cierva Formación grant (FJC2018-036746-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cast and machined porous carbon structures made from whey

  • Llamas-Unzueta, Raúl
  • Ramírez Montoya, Luis Adrián
  • Viña, Jaime
  • Argüelles, Antonio
  • Montes Morán, Miguel Ángel
  • Menéndez Díaz, José Ángel
A new porous carbon structures made by sintering whey powder in a mold at 150ºC and subsequent carbonization and/or activation are described. These porous carbon structures represent a step beyond simple activated carbon monoliths, as they can take the shape of any mold and machined if necessary. These carbon materials have a porosity that can reach up 70%, made up of a system of hierarchical and interconnected pores, which gives them a high permeability. Furthermore, they have a much higher mechanical strength than other porous carbon monoliths., The authors are grateful for the support of the Principado de Asturias-FICYT-FEDER (Project PCTI-Asturias IDI/2018/000118) and MINECO (Project CTQ2017-87820-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adsorption of impurities from nickel-plating baths using commercial sorbents to reduce wastewater discharges

  • Pérez Jiménez, Vanesa Anahi
  • Hernández-Montoya, Virginia
  • Ramírez Montoya, Luis Adrián
  • Castillo-Borja, Florianne
  • Tovar-Gómez, Rigoberto
  • Montes Morán, Miguel Ángel
The presence of moderate concentrations of impurities in the nickel-plating baths generates failures on the coated pieces. This situation entails the necessity of replacing the electroplating bath, which implies the generation of large volumes of wastewater with metallic species and high quantity of sludge. For this reason, the adsorption of the principal impurities of nickel-plating baths of an industry was analyzed in this work. Particularly, the removal of Zn2+ was studied in more detail since the presence of this metal in the baths generates black spots on the coated pieces. Different commercial materials were used as adsorbents and Zn2+ adsorption studies were carried out using both standard solutions and industrial water from the nickel-plating baths. All the adsorption tests were performed in batch systems under constant agitation and the quantification of the impurities was made by ICP-MS analysis. The bone char (BC) was an efficient adsorbent for the removal of the principal impurities of nickel-plating baths. The use of molecular simulation tools helped to understand the preferences of the hydroxyapatite (the principal component of bone char) for different metallic ions present in the industrial waters. According to both the experimental adsorption and molecular simulation results, hydroxyl and phosphate groups of bone char are responsible of the adsorption of impurities of nickel-plating baths., This work was supported by TECNM (7949.20-P), Ministerio de Economía, Industria y Competitividad, Spain (CTQ 2017-87820-R) and PCTI-Asturias/ FEDER, Spain, EU (IDI/2018/000118) projects. MC. Pérez-Jiménez acknowledges the grant (857757) received from CONACyT. L.A. Ramírez-Montoya thanks CONACyT for a post-doctoral grant (CVU No 330625, 2017)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Competitive adsorption of pollutants from anodizing wastewaters to promote water reuse

  • Acosta-Herrera, Andrea Alejandra
  • Hernández-Montoya, Virginia
  • Castillo-Borja, Florianne
  • Pérez-Cruz, María A
  • Montes Morán, Miguel Ángel
  • Cervantes, Francisco J
Anodizing wastewater contains principally phosphate (PO43-) anions according to previous studies, but with the purpose to promote water reuse in this type of industry, a complete characterization of wastewater was made to remove other anions and cations also present in significant concentration. Particularly, the adsorption of sodium (Na+), potassium (K+), fluoride (F-), sulfate (SO42-) and phosphate (PO43-) was studied using different sorbents such as: coconut shell activated carbon, bone char, bituminous coal activated carbon, natural zeolite, silica, anionic and cationic exchange resins, a coated manganese-calcium zeolite, coconut shell activated carbon containing iron and iron hydroxide. All sorbents were characterized using FT-IR spectroscopy, potentiometric titration, nitrogen adsorption isotherms at 77 K, X-ray diffraction and SEM/EDX analysis to study the adsorption mechanism. The adsorption studies were performed in batch systems under constant agitation using both standard solutions of each ion and real anodizing wastewater. Results showed that, in general, the adsorption of all anions and cations is higher when mono-component standard solutions were used, since in the anodizing wastewater all species are competing for the active sites of the adsorbent. Na+ present in anodizing wastewater was efficiently adsorbed on coated manganese-calcium zeolite (20.55 mg/g) and natural zeolite (18.55 mg/g); while K+ was poorly adsorbed on all sorbents (less than 0.20 mg/g). Anions such as F-, SO42- and PO43-, were better adsorbed on the anionic resin (0.17, 45.38 and 2.92 mg/g, respectively), the iron hydroxide (0.14, 7.96 and 2.87 mg/g, respectively) and the bone char (0.34, 8.71 and 0.27 mg/g, respectively). All these results suggest that adsorption is a promising tertiary treatment method to achieve water reuse in the anodizing industry., This work was supported by TECNM (7949.20-P), Universidad Nacional Autónoma de México (UNAM, PAPIIT grant TA100120), Ministerio de Economía, Industria y Competitividad, Spain (CTQ2017-87820-R) and PCTI-Asturias/FEDER, Spain, EU (IDI/2018/000118) projects. MC. Acosta-Herrera acknowledges the grant (731286) received from CONACyT. The authors gratefully acknowledge the computing time granted by LANCAD and CONACyT on the supercomputer Yoltla/Miztli/Xiuhcoatl at LSVP UAM-Iztapalapa/DGTIC UNAM/CGSTIC CINVESTAV., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Removal of phosphate and aluminum from water in single and binary systems using iron-modified carbons

  • Delgadillo-Velasco, Lorena
  • Hernández-Montoya, Virginia
  • Ramírez Montoya, Luis Adrián
  • Montes Morán, Miguel Ángel
  • Moreno-Virgen, María del Rosario
  • Rangel-Vázquez, Norma A.
The simultaneous removal of phosphate and aluminum from water was studied on iron-modified activated carbons. Methods such as oxidation with HNO3, impregnation and co-precipitation of iron were used to modify a commercial coconut activated carbon and to obtain seven different modified carbons. The physicochemical properties of selected samples were studied by different analytic methods such as FT-IR spectroscopy, SEM/EDX analysis and X-ray diffraction. Adsorption studies of phosphate and aluminum from water in single and binary systems were performed in bath systems with constant agitation at 30 °C and different values of pH. Particularly, the sample obtained by Oxidation-Impregnation-Drying procedure (CCOFeTB) contains 3.80% of iron in amorphous phase according to the EDX and XRD analysis, respectively. Additionally, this sample showed the best adsorption performance achieving an adsorbed amount of phosphates of 23.33 mg/g at pH 2 in single system. In binary systems, it was observed a synergistic effect in the adsorption of both species (phosphate and aluminum) and the principal adsorption mechanism is related to electrostatic interactions according with the results of molecular simulation., This work was supported by TECNM (7949.20-P), Ministerio de Economía, Industria y Competitividad, Spain (CTQ2017-87820-R) and PCTI-Asturias/FEDER, Spain, EU (IDI/2018/000118) projects. MC. Delgadillo-Velasco acknowledges the grant (467325) received from CONACyT. L.A. Ramírez-Montoya thanks CONACyT for a post-doctoral grant (CVU No 330625, 2017)., Peer reviewed