Pasar al contenido principal

MODELOS ACOPLADOS DE PROCESOS HIDROLÓGICOS E HIDRÁULICOS

DI-14-06987

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Doctorados Industriales
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario HYDRONIA EUROPE, S.L.
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of a new simulation tool coupling a 2D finite volume overland flow model and a drainage network model

  • Fernández-Pato, J.
  • García-Navarro, P.
Numerical simulation of mixed flows combining free surface and pressurized flows is a practical tool to prevent possible flood situations in urban environments. When dealing with intense storm events, the limited capacity of the drainage network conduits can cause undesirable flooding situations. Computational simulation of the involved processes can lead to better management of the drainage network of urban areas. In particular, it is interesting to simultaneuously calculate the possible pressurization of the pipe network and the surface water dynamics in case of overflow. In this work, the coupling of two models is presented. The surface flow model is based on two-dimensional shallow water equations with which it is possible to solve the overland water dynamics as well as the transformation of rainfall into runoff through different submodels of infiltration. The underground drainage system assumes mostly free surface flow that can be pressurized in specific situations. The pipe network is modeled by means of one-dimensional sections coupled with the surface model in specific regions of the domain, such as drains or sewers. The numerical techniques considered for the resolution of both mathematical models are based on finite volume schemes with a first-order upwind discretization. The coupling of the models is verified using laboratory experimental data. Furthermore, the potential usefulness of the approach is demonstrated using real flooding data in a urban environment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Implicit finite volume simulation of 2D shallow water flows in flexible meshes

  • Fernández-Pato, J.
  • Morales-Hernández, M.
  • García-Navarro, P.
In this work, an implicit method for solving 2D hyperbolic systems of equations is presented, focusing on the application to the 2D shallow water equations. It is based on the first order Roe''s scheme, in the framework of finite volume methods. A conservative linearization is done for the flux terms, leading to a non-structured matrix for unstructured meshes thus requiring iterative methods for solving the system. The validation is done by comparing numerical and exact solutions in both unsteady and steady cases. In order to test the applicability of the implicit scheme to real world situations, a laboratory scale tsunami simulation is carried out and compared to the experimental data. The implicit schemes have the advantage of the unconditional stability, but a quality loss in the transient solution can appear for high CFL numbers. The properties of the scheme are well suited for the simulation of unsteady shallow water flows over irregular topography using all kind of meshes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Simulación de avenidas mediante un modelo hidráulico/hidrológico distribuido en un tramo urbano del río Ginel (Fuentes de Ebro)

  • Fernandez Pato, Javier
  • Sánchez, Antonio
  • García-Navarro, Pilar
En las últimas décadas, la simulación de diferentes procesos hidráulicos/hidrológicos ha constituido una herramienta de gran utilidad tanto en la prevención de riesgos como en la gestión de sus consecuencias. La predicción de caudales, calados y manchas de inundación para distintos episodios de ondas de avenida permite valorar la situación con antelación y proporciona información útil a la hora de tomar medidas de contención como, por ejemplo, la colocación óptima de diques para evitar o paliar daños. En este trabajo, se describe la aplicación de un modelo distribuido de simulación hidráulica basado en las ecuaciones 2D de aguas poco profundas a la simulación de ondas de avenida en un tramo urbano del río Ginel (Fuentes de Ebro). Mediante este modelo, se pueden obtener resultados de calado de agua y velocidad en cualquier punto del dominio de cálculo. El código está diseñado para aprovechar la potencia de las tarjetas gráficas (GPU) de última generación, proporcionando una simulación ágil y precisa y constituya el motor de cálculo del programa RiverFlow2D. Los resultados obtenidos permiten valorar las consecuencias de varias riadas con períodos de retorno de hasta 500 años.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The shallow water equations and their application to realistic cases

  • García-Navarro, P.
  • Murillo, J.
  • Fernández-Pato, J.
  • Echeverribar, I.
  • Morales-Hernández, M.
The numerical modelling of 2D shallow flows in complex geometries involving transient flow and movable boundaries has been a challenge for researchers in recent years. There is a wide range of physical situations of environmental interest, such as flow in open channels and rivers, tsunami and flood modelling, that can be mathematically represented by first-order non-linear systems of partial differential equations, whose derivation involves an assumption of the shallow water type. Shallow water models may include more sophisticated terms when applied to cases of not pure water floods, such as mud/debris floods, produced by landslides. Mud/debris floods are unsteady flow phenomena in which the flow changes rapidly, and the properties of the moving fluid mixture include stop and go mechanisms. The present work reports on a numerical model able to solve the 2D shallow water equations even including bed load transport over erodible bed in realistic situations involving transient flow and movable flow boundaries. The novelty is that it offers accurate and stable results in realistic problems since an appropriate discretization of the governing equations is performed. Furthermore, the present work is focused on the importance of the computational cost. Usually, the main drawback is the high computational effort required for obtaining accurate numerical solutions due to the high number of cells involved in realistic cases. However, the proposed model is able to reduce computer times by orders of magnitude making 2D applications competitive and practical for operational flood prediction. Moreover our results show that high performance code development can take advantage of general purpose and inexpensive Graphical Processing Units, allowing to run almost 100 times faster than old generation codes in some cases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Use of internal boundary conditions for levees representation: application to river flood management

  • Echeverribar, I.
  • Morales-Hernández, M.
  • Brufau, P.
  • García-Navarro, P.
River floods can be simulated with the 2D shallow water system of equations using finite volume methods, where the terrain is discretized in cells that form the computational mesh. Usually a proper treatment of wet/dry fronts is required. River levees can be modelled as part of the topography by means of sufficiently small cells of higher elevation than the rest of the bed level in locally refined meshes. This procedure is associated with a large computational time since the time step depends directly on the cell size. The alternative proposed in this work includes the levees as internal boundary conditions in the 2D numerical scheme. In particular, levees have been defined by a weir law that, depending on the relative values of water surface levels on both sides, can formulate the discharge for different situations (i.e. free flow and submerged flow). In addition, having identified numerical difficulties in cases of low discharge under free flow conditions, a novel procedure to avoid oscillations has been developed and called volume transport method. The validation and comparison between methods has been carried out with benchmark test cases and, in addition, with a real flood event in the Ebro River (Spain).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A 2D finite volume simulation tool to enable the assessment of combined hydrological and morphodynamical processes in mountain catchments

  • Fernández-Pato, J.
  • Martínez-Aranda, S.
  • García-Navarro, P.
Nowadays, the great power of modern computers allows to develop computational models able to deal with simulations of several coupled phenomena over detailed complex topography. An efficient and properly calibrated computational model represents a useful tool to provide insight into the catchment dynamics at hydrological and geomorphological levels. In addition, it allows to develop detailed risk management and conservation plans. In this work, we present a coupled surface-groundwater distributed flow model with hydrological (rainfall and infiltration) and geomorphological (suspended and bed load sediment transport) components. The coupled model is applied to well characterized experimental catchments that are used as realistic test cases. The calibration of the water flow model response to rainfall is performed by means of the fitting to experimental outlet hydrographs of the results supplied by a coupled formulation of 2D Shallow Water Equations and 2D Darcy's law for saturated porous media connected via suitable infiltration laws. The calibration of a suspended and bed load model is also addressed by means of the fitting to experimental outlet sedigraphs. The numerical results show a good agreement between numerical and observed hydrographs and sedigraphs, significantly improving previous published simulations. Additionally, the need to repeat the simulations in the calibration processes is no longer an unapproachable problem.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A fractional-order infiltration model to improve the simulation of rainfall/runoff in combination with a 2D shallow water model

  • Fernandez-Pato, J.
  • Gracia, J.L.
  • Garcia-Navarro, P.
In this work, a distributed two-dimensional (2D) shallow water (SW) flow model is combined with a fractional-order version of the Green-Ampt (FOGA) infiltration law to improve rainfall/runoff simulation in real catchments. The surface water model is based on a robust finite volume method on triangular grids that can handle flow over dry bed and multiple wet/dry fronts. When supplied with adequate infiltration laws, this model can provide useful information in surface hydrology. The classical Green-Ampt law is generalized by using a Caputo fractional derivative of order less than or equal to 1 in Darcy''s law. The novelty of this combination is that, on the one hand, the distributed SW simulation provides a detailed surface water distribution and, on the other hand, the FOGA model offers the possibility to model infiltration rates not monotonically decreasing. In order to obtain the best results, a non-uniform order of the fractional derivative depending on the cumulative infiltration and the existence of available surface water is proposed for realistic cases. This allows significant improvement of previous published numerical results in the literature for several storm events in catchments where the infiltration process occurs.