Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identificación de Modelos LPV para el Control de Sistemas No Lineales, Identification of LPV models for the control of non-linear systems

  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
[EN] In this paper we suggest a methodology for the identification of linear parameter time varying models (LPV), based on a previous local identification at some operating points, which presents a high degree of flexibility in adaptations to non-linear processes. These LPV models are characterised by containing within their dynamic trajectories those ones of the original non-linear system, and they will be defined by a linear fractional dependence with respect to the time varying parameters. When the LPV model has been identified, it is possible to design, in turn, a linear controller with parameters that vary in time in order to control the non-linear system. This identification and control methodology will then be applied to a non-linear turbocharged diesel engine., [ES] En este artículo se propone una metodología para la identificación de modelos lineales de parámetros variables con el tiempo (LPV) basada en la identificación lineal previa en diferentes puntos de funcionamiento que permite la adaptación a modelos no lineales en general. Los modelos LPV se caracterizarán por contener dentro de sus trayectorias dinámicas a las del sistema no lineal de origen y se definirán mediante dependencia lineal fraccional (LFR) de los parámetros variables con el tiempo. Una vez identificado el modelo LPV es posible diseñar, a su vez, un controlador lineal de parámetros variables con el tiempo para controlar al sistema no lineal. Esta metodología de identificación y control se aplicará sobre un motor no lineal turbodiesel., Financiado parcialmente por los proyectos FEDER-CYCIT: DPI2004-08383-C03-02 y DPI 2005-07835.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hole distribution in phononic crystals: design and optimization

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • García Nieto, Susana
An exhaustive study has been made into the potential improvement in attenuation and focusing of phononic crystal arrays resulting from the deliberate creation of vacancies. Use is made of a stochastic search algorithm based on evolutionary algorithms called the epsilon variable multi-objective genetic algorithm which, in conjunction with the application of multiple scattering theory, enables the design of devices for effectively controlling sound waves. Several parameters are analyzed, including the symmetries used in the distribution of holes and the optimum number of holes. The validity and utility of the general rules obtained have been confirmed experimentally., This work was partially supported by MEC (Spanish Government) and FEDER funds: Project Nos. 419DPI2005-07835, and MAT2006-03097 and Generalitat Valenciana Project Nos. GV06/026 and 420 GV/2007/191. The authors would like to thank John Rawlins (associate member of the Institute of Translation and Interpreting (No. 9743) of UK, and "Certified PRO" of ProZ according to the EN 15038) for his help with the use of English.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-linear Robust Identification of a Greenhouse Model using Multi-objective Evolutionary Algorithms

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Ramos Fernández, César|||0000-0003-1806-2114
  • Sanchís Saez, Javier|||0000-0001-9697-2696
[EN] This paper presents a non-linear climatic model (temperature and humidity), based on first-principles equations, of a greenhouse where roses are to be grown using hydroponic methods. Fitting of model parameters (15 in all) is based on measured data collected during summer in the Mediterranean area. A multi-objective optimisation procedure for estimating a set of non-linear models Theta(P) (Pareto optimal), considering simultaneously several optimisation criteria, is presented. A new multi-objective evolutionary algorithm, (sic)-MOGA, has been designed to converge towards ((Theta) over cap (P)* a reduced but well distributed representation of Theta(P) since good convergence and distribution of the Pareto front J(Theta(P)) is achieved by the algorithm. The set can (Theta) over cap (P)* be used as the basis to choose an optimal model that offers a good trade-off among different optimality criteria that have been established. The procedure proposed is applied to the identification and validation of the greenhouse model presented in the paper. (C) 2007 IAgrE. Published by Elsevier Ltd. All rights reserved., Partially supported by MEC (Spanish government) and FEDER funds: projects DPI2005-07835 and DPI2004-8383-C03-02, and Generalitat Valenciana GV06/026. We would like to thank the R&D+i Linguistic Assistance Office at the Universidad Polite´cnica de Valencia for their help in translating this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Genetic Algorithm in the Optimization of the Acoustic Attenuation System

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Fuster García, Elíes|||0000-0002-0716-8960
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Sanchís Saez, Javier|||0000-0001-9697-2696
[EN] It is well known that Genetic Algorithms (GA) is an optimization method which can be used in problems where the traditional optimization techniques are difficult to be applied. Sonic Crystals (SC) are periodic structures that present ranges of sound frequencies related with the periodicity of the structure, where the sound propagation is forbidden. This means that in the acoustic spectrum there are ranges of frequencies with high acoustic attenuation. This attenuation can be improved producing vacancies in the structure. In this paper we use a parallel implementation of a GA to optimize those structures, by means of the creation of vacancies in a starting SC, in order to obtain the best acoustic attenuation in a predetermined range of frequencies. The cost function used in GA is based on the Multiple Scattering Theory (MST), which is a self consistent method for calculating acoustic pressure in SCs. As a final result we achieve a quasi ordered structures that presents a high acoustic attenuation in a predetermined range of frequencies, independent of the periodicity of the SC., The authors acknowledge financial support provided by the Spanish MEC (Project No. MAT2006-03097) and by the Generalitat Valenciana (Spain) under Grant No. GV/2007/191. This work also has been partially supported by MEC (Spanish government) and FEDER funds: projects DPI2005-07835, DPI2004- 8383-C03-02 and GVA-026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High optimization process for increasing the attenuation properties of acoustic metamaterials by means of the creation of defects

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • García Nieto, Susana
An improvement in the attenuation capabilities of acoustic metamaterials by means of the creation of defects is considered here as a multiobjective optimization problem. From this point of view, it is possible to define the optimum strategy in the creation of defects to achieve an important increase in acoustic attenuation in a predetermined range of frequencies. A powerful multiobjective optimization algorithm called evMOGA has been used to solve this problem. The study has been restricted to the case of a two-dimensional sonic crystal formed by rigid cylinders in air, the defects being vacancies in the initial structure., This work was partially supported by MEC (Spanish Government) and FEDER funds: Project Nos. 419DPI2005-07835 and MAT2006-03097 and Generalitat Valenciana Project Nos. GV06/026 and GV/2007/191.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust and Stable Predictive Control with Bounded Uncertainties

  • Ramos Fernández, César|||0000-0003-1806-2114
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
[EN] Min-Max optimization is often used for improving robustness in Model Predictive Control (MPC). An analogy to this optimization could be the BDU (Bounded Data Uncertainties) method, which is a regularization technique for least-squares problems that takes into account the uncertainty bounds. Stability of MPC can be achieved by using terminal constraints, such as in the CRHPC (Constrained Receding-Horizon Predictive Control) algorithm. By combining both BDU and CRHPC methods, a robust and stable MPC is obtained, which is the aim of this work. BDU also offers a guided method of tuning the empirically tuned penalization parameter for the control effort in MPC. (C) 2008 Elsevier Inc. All rights reserved., This work has been partially financed by DPI2005-07835 and DPI2004-08383-C03-02 MEC-FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Algoritmos Genéticos Aplicados al Diseño de Controladores Robustos, An application of genetic algorithms to robust control design

  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Blasco, Xavier|||0000-0002-9737-2833
[ES] La estrategia de optimización multiobjetivo denominada Programación Física o Physical Programming (PP) permite al diseñador expresar sus preferencias explícitamente para cada objetivo de diseño (tiempo de establecimiento, estabilidad, etc.) de una forma flexible y con un claro significado ''físico''. Estas preferencias se formulan a través de categorías del tipo deseable, tolerable, inaceptable, etc. asociadas a unos rangos numéricos que el diseñador fija para cada especificación. En este artículo se muestra cómo se puede plantear un problema de control robusto como un problema de optimización multiobjetivo y cómo se puede utilizar PP con Algoritmos Genéticos (AGs) para salvar los problemas que presenta esta técnica frente a funciones con numerosos mínimos locales. En el artículo se resuelve el problema tipo para control robusto de un proceso de masa-muelle y se comparan las soluciones a este problema desarrolladas por otros autores con las obtenidas empleando PP y AGs., [EN] Physical Programming (PP) is a multiobjective optimization technique where the designer, for each objective or specification of the problem, declares his preferences in a flexible way. These preferences (e.g. overshoot, settling time, gain margin) are expressed with linguistic terms such as tolerable, desirable, undesirable, etc. and they are associated with numeric ranges in the same physical units as the objective itself is (e.g. seconds, percentages). This paper shows how PP can be applied to the design of robust controllers from a multiobjective optimization point of view. Non linear optimization used in the original PP method has been substituted by a Genetic Algorithm to avoid local minima which can usually arise in these multimodal problems. The ACC Robust Control Benchmark has been solved and the result obtained is compared with solutions from other authors., Financiado parcialmente por los proyectos de investigacion del MEC: FEDER DPI2004-8383-C03-02 y DPI2005-07835
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of sonic crystal attenuation properties by ev-MOGA multiobjective evolutionary algorithm

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Blasco, Xavier|||0000-0002-9737-2833
  • Romero-García, Vicente|||0000-0002-3798-6454
  • Sánchez Pérez, Juan Vicente|||0000-0002-4473-8782
  • García-Raffi, L. M.|||0000-0003-3985-8453
[EN] This paper shows a promising method for acoustic barrier design using a new acoustic material called Sonic Crystals (SCs). The configuration of these SCs is set as a multiobjective optimization problem which is very difficult to solve with conventional optimization techniques. The paper presents a new parallel implementation of a Multiobjective Evolutionary Algorithm called ev-MOGA (also known as (sic)-MOGA) and its application in a complex design problem. ev-MOGA algorithm has been designed to converge towards a reduced, but well distributed, representation of the Pareto Front (solution of the multiobjective optimization problem). The algorithm is presented in detail and its most important properties are discussed. To reduce the ev-MOGA computational cost when., Partially supported by MEC (Spanish Government) and FEDER funds: projects DPI2005-07835, MAT2006-03097 and Generalitat Valenciana (Spain) projects GV06/026, GV/2007/191
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Model-based predictive control of greenhouse climate for reducing energy and water consumption

  • Blasco, Xavier|||0000-0002-9737-2833
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Ramos Fernández, César|||0000-0003-1806-2114
  • Sanchís Saez, Javier|||0000-0001-9697-2696
[EN] This work focuses on development of control algorithms by incorporating energy and water consumption to maintain climatic conditions in greenhouse. Advanced control algorithms can supply solutions to modern exploitations. The new developments usually require accurate models (probably multivariable and non-linear ones) and control methodologies capable of using these models. As an additional requirement it is important for the final application to be easy to use, so advanced control will not mean an increase in complexity of the manipulation of the installation. This article shows an alternative to classical climate control. It is based on two fundamental elements: an accurate non-linear model and a model-based predictive control (MBPC) that incorporate energy and water consumption. Genetic algorithms (GAs) play a key role in these two elements because functions to solve are non-convex and with local minima. First of all GAs supply a way to adjust the non-linear model parameters obtained from first principles, and finally GAs open the possibility of using non-linear model in the MBPC and of establishing a flexible cost index to minimize energy and water consumption. The results on a plastic greenhouse with arch-shaped roofs and for Mediterranean area are presented, important reduction in energy and water used in the cooling system (nebulization) is obtained. (c) 2006 Elsevier B.V. All rights reserved., Partially supported by MEC (Spanish government) and FEDER funds: projects DPI2004-8383-C03-02 and DPI2005-07835.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust identification of non-linear greenhouse model using evolutionary algorithms

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Ramos Fernández, César|||0000-0003-1806-2114
  • Sanchís Saez, Javier|||0000-0001-9697-2696
[EN] This paper presents the non-linear modelling, based oil first principle equations, for a climatic model of a greenhouse and the estimation of the feasible parameter set (FPS) when the identification error is bounded simultaneously by several norms. The robust identification problem is transformed into a multimodal optimization problem with an infinite number of global minima that constitute the FPS. For the optimization task, a special evolutionary algorithm (epsilon-GA) is presented, which characterizes the FPS by means of a discrete set of models that are well distributed along the FPS. A procedure for determining the norm bounds, such that FPS not equal 0, is (c) 2007 Elsevier Ltd. All rights reserved., Partially supported by MEC (Spanish government) and FEDER funds: projects DPI2005-07835 and DPI2004- 8383-C03-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identificación Robusta de un Proceso Biomédico Mediante Algoritmos Evolutivos, Robust identification of a biomedical process using evolutionary algorithms

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Sanchís Saez, Javier|||0000-0001-9697-2696
[EN] In this paper, a non-linear robust identification (RI) methodology to characterize the feasible parameter set (FPS), when the identification error is unknown but bounded simultaneously by several norms, is presented. For that, the Robust Identification (RI) problem is transformed into a multimodal optimization one with an infinite number of global minima which constitute the FPS. For the optimization task a special Genetic Algorithm (e-GA), inspired by Multiobjective Evolutionary Algorithms (MOEA), is presented, which characterizes the FPS by means of a discrete set of models (FPS*) well distributed along the FPS. An application example to a biomedical model which shows the blockage that produces a given drug on the ionic currents of a cardiac cell is presented to illustrate the methodology., [ES] En este trabajo se presenta una metodología de identificación robusta (IR) en sistemas no lineales que permite caracterizar el conjunto de parámetros factible (FPS) cuando se asume que el error de identificación (EI) permanece acotado por varias normas simultáneamente. Para ello, se transforma el problema de IR en un problema de optimización multimodal donde los infinitos mínimos globales constituyen el FPS. Para abordar la optimización se presenta un algoritmo evolutivo (EA) específico denominado ε-GA, inspirado en los algoritmos evolutivos multiobjetivo, el cual caracteriza el FPS mediante un conjunto discreto de modelos FPS* adecuadamente distribuido a lo largo del FPS. Como ejemplo de aplicación del procedimiento, se presenta la IR de un modelo biomédico que refleja el bloqueo que produce un determinado fármaco sobre las corrientes iónicas de una célula cardíaca., Financiado parcialmente por los proyectos de investigación del MEC del Gobierno Español FEDER DPI2005-07835 y FEDER DPI2004-8383-C03-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nonlinear Robust Identification using Evolutionary Algorithms. Application to a Biomedical Process

  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Ramos Fernández, César|||0000-0003-1806-2114
  • Sanchís Saez, Javier|||0000-0001-9697-2696
[EN] This work describes a new methodology for robust identification (RI), meaning the identification of the parameters of a model and the characterization of uncertainties. The alternative proposed handles non-linear models and can take into account the different properties demanded by the model. The indicator that leads the identification process is the identification error (IE), that is, the difference between experimental data and model response. In particular, the methodology obtains the feasible parameter set (FPS, set of parameter values which satisfy a bounded IE) and a nominal model in a non-linear identification problem. To impose different properties on the model, several norms of the IE are used and bounded simultaneously. This improves the model quality, but increases the problem complexity. The methodology proposes that the RI problem is transformed into a multimodal optimization problem with an infinite number of global minima which constitute the FPS. For the optimization task, a special genetic algorithm (epsilon-GA), inspired by Multiobjective Evolutionary Algorithms, is presented. This algorithm characterizes the FPS by means of a discrete set of models well distributed along the FPS. Finally, an application for a biomedical model which shows the blockage that a given drug produces on the ionic currents of a cardiac cell is presented to illustrate the methodology. (C) 2008 Elsevier Ltd. All rights reserved., Partially supported by MEC (Spanish government) and FEDER funds: Projects DP12005-07835, DP12004-8383-CO3-02 and Generalitat Valenciana (Spain) Project GVA-026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Applied Pareto multi-objective optimization by stochastic solvers

  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Blasco, Xavier|||0000-0002-9737-2833
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
[EN] It is well known that many engineering design problems with different objectives, some of which can be opposed to one another, can be formulated as multi-objective functions and resolved with the construction of a Pareto front that helps to select the desired solution. Obtaining a correct Pareto front is not a trivial question, because it depends on the complexity of the objective functions to be optimized, the constraints to keep within and, in particular, the optimizer type selected to carry out the calculations. This paper presents new methods for Pareto front construction based on stochastic search algorithms (genetic algorithms, GAs and multi-objective genetic algorithms, MOGAs) that enable a very good determination of the Pareto front and fulfill some interesting specifications. The advantages of these applied methods will be proven by the optimization of well-known benchmarks for metallic supported I-beam and gearbox design. (C) 2008 Elsevier Ltd. All rights reserved., This research has been partially financed by GV06-026 Generalitat Valenciana and DPI2005-07835, MEC (Spain)-FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new graphical visualization of n-dimensional Pareto front for decision-making in multiobjective optimization

  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] New challenges in engineering design lead to multiobjective (multicriteria) problems. In this context, the Pareto front supplies a set of solutions where the designer (decision-maker) has to look for the best choice according to his preferences. Visualization techniques often play a key role in helping decision-makers, but they have important restrictions for more than two-dimensional Pareto fronts. In this work, a new graphical representation, called Level Diagrams, for n-dimensional Pareto front analysis is proposed. Level Diagrams consists of representing each objective and design parameter on separate diagrams. This new technique is based on two key points: classification of Pareto front points according to their proximity to ideal points measured with a specific norm of normalized objectives (several norms can be used); and synchronization of objective and parameter diagrams. Some of the new possibilities for analyzing Pareto fronts are shown. Additionally, in order to introduce designer preferences, Level Diagrams can be coloured, so establishing a visual representation of preferences that can help the decision-maker. Finally, an example of a robust control design is presented - a benchmark proposed at the American Control Conference. This design is set as a six-dimensional multiobjective problem. (c) 2008 Elsevier Inc. All rights reserved., Partially supported by MEC (Spanish Government) and FEDER funds: Projects DPI2005-07835, DPI2004-8383-C03-02 and GVA-026.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LQR Robusto Mediante Incertidumbre Acotada en los Datos, Robust LQR via bounded data uncertainties

  • Ramos Fernández, César|||0000-0003-1806-2114
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
[EN] This work presents the BDU technique (Bounded Data Uncertainties) and the tuning of the linear quadratic regulator (LQR) via this technique, improving the system robustness. The BDU method is stated as a Min-Max problem where the best solution is sought in the worst scenario. So a new LQR tuning method is offered by taking into account the bounds on the uncertainty. The application to multidimensional systems is not trivial since a two-point boundary value problem (TPBVP) appears, which is solved iteratively., [ES] En este trabajo se presenta el sintonizado del Regulador Lineal Cuadrático (LQR) mediante la técnica de incertidumbre acotada en los datos o Bounded Data Uncertainties (BDU) con el fin de mejorar la robustez del sistema, planteándose como un Min-Max donde se busca la mejor solución en el peor escenario posible. Así se ofrece un nuevo método guiado de ajuste del LQR, considerando los límites de la incertidumbre. La aplicación a sistemas multidimensionales no es trivial, pues presenta la forma de un Two-Point Boundary Value Problem (TPBVP), el cual se resuelve iterativamente., Financiado parcialmente por los proyectos de investigación del MEC del Gobierno Español FEDER DPI2005-07835 y FEDER DPI2004-8383-C03-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Predictive LPV control of a liquid-gas separation process

  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Ramos Fernández, César|||0000-0003-1806-2114
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
[EN] The problem of controlling a liquid-gas separation process is approached by using LPV control techniques. An LPV model is derived from a nonlinear model of the process using differential inclusion techniques. Once an LPV model is available, an LPV controller can be synthesized. The authors present a predictive LPV controller based on the GPC controller [Clarke D, Mohtadi C, Tuffs P. Generalized predictive control - Part I. Automatica 1987;23(2):137-48; Clarke D, Mohtadi C, Tuffs P. Generalized predictive control - Part II. Extensions and interpretations. Automatica 1987;23(2):149-60]. The resulting controller is denoted as GPC-LPV. This one shows the same structure as a general LPV controller [El Gahoui L, Scorletti G. Control of rational systems using linear-fractional representations and linear matrix inequalities. Automatica 1996;32(9):1273-84; Scorletti G, El Ghaoui L. Improved LMI conditions for gain scheduling and related control problems. International Journal of Robust Nonlinear Control 1998;8:845-77; Apkarian P, Tuan HD. Parametrized LMIs in control theory. In: Proceedings of the 37th IEEE conference on decision and control; 1998. p. 152-7; Scherer CW. LPV control and full block multipliers. Automatica 2001;37:361-75], which presents a linear fractional dependence on the process signal measurements. Therefore, this controller has the ability of modifying its dynamics depending on measurements leading to a possibly nonlinear controller. That controller is designed in two steps. First, for a given steady state point is obtained a linear GPC using a linear local model of the nonlinear system around that operating point. And second, using bilinear and linear matrix inequalities (BMIs/LMIs) the remaining matrices of GPC-LPV are selected in order to achieve some closed loop properties: stability in some operation zone, norm bounding of some input/output channels, maximum settling time, maximum overshoot, etc., given some LPV model for the nonlinear system. As an application, a GPC-LPV is designed for the derived LPV model of the liquid-gas separation process. This methodology can be applied to any nonlinear system which can be embedded in an LPV system using differential inclusion techniques. (C) 2006 Elsevier Ltd. All rights reserved., Partially supported by projects: CICYT DPI2004-08383-C03-02 and DPI2005-07835.