Pasar al contenido principal

DESARROLLO DE TECNICAS DE DIAGNOSTICO DE AVERIAS ELECTROMECANICAS EN MAQUINAS ELECTRICAS DE INDUCCION BASADAS EN LA APLICACION DE METODOS AVANZADOS DE ANALISIS DE SEÑAL

DPI2008-06583

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transient tracking of low and high-order eccentricity-related components in induction motors via TFD tools

  • Climente Alarcón, Vicente
  • Roger-Folch, José
  • Jover-Rodriguez, P.
  • Arkkio, A.
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Pons Llinares, Joan|||0000-0003-3756-1242
[EN] The present work is focused on the diagnosis of mixed eccentricity faults in induction motors via the study of currents demanded by the machine. Unlike traditional methods, based on the analysis of stationary currents (Motor Current Signature Analysis (MCSA)), this work provides new findings regarding the diagnosis approach proposed by the authors in recent years, which is mainly focused on the fault diagnosis based on the analysis of transient quantities, such as startup or plug stopping currents (Transient Motor Current Signature Analysis (TMCSA)), using suitable time-frequency decomposition (TFD) tools. The main novelty of this work is to prove the usefulness of tracking the transient evolution of high-order eccentricity-related harmonics in order to diagnose the condition of the machine, complementing the information obtained with the low-order components, whose transient evolution was well characterised in previous works. Tracking of high-order eccentricity-related harmonics during the transient, through their associated patterns in the time-frequency plane, may significantly increase the reliability of the diagnosis, since the set of fault-related patterns arising after application of the corresponding TFD tool is very unlikely to be caused by other faults or phenomena. Although there are different TFD tools which could be suitable for the transient extraction of these harmonics, this paper makes use of a WignerVille distribution (WVD)-based algorithm in order to carry out the time-frequency decomposition of the startup current signal, since this is a tool showing an excellent trade-off between frequency resolution at both high and low frequencies. Several simulation results obtained with a finite element-based model and experimental results show the validity of this fault diagnosis approach under several faulty and operating conditions. Also, additional signals corresponding to the coexistence of the eccentricity and other non-fault related phenomena making difficult the diagnosis (fluctuating load torque) are included in the paper. Finally, a comparison with an alternative TFD tool the discrete wavelet transform (DWT) applied in previous papers, is also carried out in the contribution. The results are promising regarding the usefulness of the methodology for the reliable diagnosis of eccentricities and for their discrimination against other phenomena. © 2010 Elsevier Ltd.All rights reserved., This work was supported by the Spanish 'Ministerio de Educacion y Ciencia', in the framework of the 'Programa Nacional de proyectos de Investigacion Fundamental', project reference DP12008-06583/DPI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diagnosis of Induction Motor Faults in Time-Varying Conditions Using the Polynomial-Phase Transform of the Current

  • Manuel Pineda-Sanchez|||0000-0001-7844-8831
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Puche-Panadero, Rubén|||0000-0003-2090-1941
  • Roger-Folch, José
  • Pérez-Cruz, Juan
[EN] Transient motor current signature analysis is a recently developed technique for motor diagnostics using speed transients. The whole speed range is used to create a unique stamp of each fault harmonic in the time-frequency plane. This greatly increases diagnostic reliability when compared with non-transient analysis, which is based on the detection of fault harmonics at a single speed. But this added functionality comes at a price: well-established signal analysis tools used in the permanent regime, mainly the Fourier transform, cannot be applied to the nonstationary currents of a speed transient. In this paper, a new method is proposed to fill this gap. By applying a polynomial-phase transform to the transient current, a new, stationary signal is generated. This signal contains information regarding the fault components along the different regimes covered by the transient, and can be analyzed using the Fourier transform. The polynomial-phase transform is used in radar, sonar, communications, and power systems fields, but this is the first time, to the best knowledge of the authors, that it has been applied to the diagnosis of induction motor faults. Experimental results obtained with two different commercial motors with broken bars are presented to validate the proposed method., This work was supported by the Spanish "Ministerio de Educacion y Ciencia" in the framework of the "Programa Nacional de Proyectos de Investigacion Fundamental," project reference DPI2008-06583/DPI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Scale Invariant Feature Extraction Algorithm for the Automatic Diagnosis of Rotor Asymmetries in Induction Motors

  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Aviyente, Selin
  • Strangas, Elias G.
[EN] The development of portable devices that make the reliable diagnosis of faults in electric motors possible has become a challenge for many researchers and maintenance enterprises. These machines intervene in a huge amount of processes and applications and their eventual failure may imply important costs in terms of time and money. However, the aforementioned issue remains unsolved because most of the developed fault diagnosis techniques rely on the user expertise, since they are based on a qualitative interpretation of the results. This complicates the implementation of these methodologies in condition monitoring systems or devices. The objective of this paper is to propose an integral methodology that is able to diagnose the presence of rotor bar failures in an automatic way. The proposed algorithm combines the Discrete Wavelet Transform with the scale transform for feature extraction and correlation coefficient for pattern recognition. The algorithm is applied to both small and large motors operating in a wide range of conditions. The results illustrate the validity and generality of the approach for automatic condition monitoring of electric motors., This work was supported in part by the Ministerio de Educacion, Modalidad B del subprograma de estancias de movilidad de profesores e investigadores espanoles en centros extranjeros, Estancias de movilidad en el extranjero Jose Castillejo para jovenes doctores and by the Spanish Ministerio de Educacion y Ciencia in the framework of the Programa Nacional de proyectos de Investigacion Fundamental, project reference DPI2008-06583/DPI. Personal use of this material is permitted. However, permission to use this material for any other purposes must be obtained from the IEEE by sending a request to pubs-permissions@ieee.org. Paper no. TII-11-348. Asterisk indicates corresponding author.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of non-Consecutive Bar Breakages in Motor Current Signature Analysis for the Diagnosis of Rotor Faults in Induction Motors

  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Fernandez Cabanas, Manes
  • Pineda-Sanchez, Manuel
  • Rojas García, Carlos H.
[EN] Studies of rotor asymmetries in squirrel-cage induction motors have traditionally focused on analyses of the effects of the breakage of adjacent bars on the magnetic field and current spectrum. However, major motor manufacturers have reported cases where damaged bars are randomly distributed around the rotor perimeter of large HV machines. In some of these cases, the motors were being monitored under maintenance programs based on motor current signature analysis (MCSA), and the degree of degradation found in the rotor was much greater than that predicted by analysis of their current spectra. For this reason, a complete study was carried out, comprising a theoretical analysis, as well as simulation and tests, to investigate the influence that the number and location of faulty bars has on the traditional MCSA diagnosis procedure. From the theoretical analysis, based on the application of the fault-current approach and space-vector theory, a very simple method is deduced, which enables the left sideband amplitude to be calculated for any double bar breakage, per unit of the sideband amplitude corresponding to a single breakage. The proposed methodology is generalized for the estimation of the sideband amplitude in the case of multiple bar breakages and validated by simulation using a finite-element-based model, as well as by laboratory tests., This work was supported by the Spanish Ministerio de Educacion y Ciencia under ´ the framework of the Programa Nacional de proyectos de Investigacion Funda- ´mental Project Reference DPI2008-06583/DPI. Paper no. TEC-00393-2008
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detection of Broken Outer-Cage Bars for Double-Cage Induction Motors Under the Startup Transient

  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Pons Llinares, Joan|||0000-0003-3756-1242
  • Park, Jongbin
  • Lee, Sang Bin
  • Yoo, Jiyoon
  • Kral, Christian
[EN] Unlike single-cage rotor fault detection, fast Fourier transform (FFT)-based steady-state spectrum analysis techniques can fail to detect outer-cage faults in double-cage induction motors due to the small outer-cage current under running conditions. Double-cage motors are typically employed in applications that require loaded starts. This makes the outer cage vulnerable to fatigue failure since it must withstand the high starting current and long startup time frequently. However, there are only a few publications that investigate detection techniques specifically for double-cage motors. In this paper, considering that the influence of the faulty outer cage is strong at startup due to the large outer-cage current, detection of outer-cage faults under the startup transient is investigated. A discrete-wavelet-transform-based method is proposed as a viable solution to the detection of outer-cage faults for double-cage motors. An experimental study on fabricated copper double-cage induction motors shows that the proposed method provides sensitive and reliable detection of double-cage rotor faults compared to FFT., This work was supported in part by the Spanish “Ministerio de Educación y Ciencia,” in the framework of the “Programa Nacional de Proyectos de Investigación Fundamental,” under Project Reference DPI2008-06583/DPI, and in part by the Human Resources Development of Korea Institute of Energy Technology Evaluation and Planning under Grant 20114010203010 funded by the Korean Government Ministry of Knowledge Economy
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diagnosis of rotor asymmetries in induction motors based on the transient extraction of fault components using filtering techniques

  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Rusek, Jan
  • Roger-Folch, José
[EN] The aim of this paper is to present and validate a methodology for diagnosing rotor asymmetries in cage motors, based on the analysis of the stator startup current. The method consists of the extraction of a harmonic component introduced by this fault - the left sideband component - from the stator startup current. Two alternative techniques developed by different research groups are proposed for the transient extraction of this component; the digital low-pass filtering (DLPF) and the discrete wavelet transform (DWT). Both approaches are applied to three different industrial motors ranging from 1.1 to 450kW. A detailed explanation of the physical basis of the method and comments related to the application scope of the approach are also given. The results show the robustness of both approaches for the reliable diagnosis of the fault and suggest a clear potentiality for extending the methodology to the detection of other types of faults introducing components dependant on the slip. (C) 2009 Elsevier B.V. All rights reserved., This work was supported by the Spanish “Ministerio de Educación y Ciencia”, in the framework of the “Programa Nacional de proyectos de Investigación Fundamental”, project reference DPI2008-06583/DPI. The authors also thank ‘Vicerrectorado de Investigación, Desarrollo e Innovación of Universidad Politécnica de Valencia’ for financing a part of this research through the program ‘Programa de Apoyo a la Investigación y Desarrollo’ (PAID-06-07).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Resolution of the MCSA Method Via Hilbert Transform, Enabling the Diagnosis of Rotor Asymmetries at Very Low Slip

  • Puche-Panadero, Rubén|||0000-0003-2090-1941
  • Manuel Pineda-Sanchez|||0000-0001-7844-8831
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Hurtado-Perez, Elias|||0000-0001-8909-0679
  • Roger-Folch, José
  • Pérez-Cruz, Juan
[EN] This paper proposes an online/offline induction motor current signature analysis (MCSA) with advanced signal-and-data-processing algorithms, based on the Hilbert transform. MCSA is a method for motor diagnosis with stator-current signals. Although it is one of the most powerful online methods for diagnosing motor faults, it has some drawbacks that can degrade the performance and accuracy of a motor-diagnosis system. In particular, it is very difficult to detect broken rotor bars when the motor is operating at low slip or under no load, due to fast Fourier transform (FFT) frequency leakage and the small amplitude of the current components related to the fault. Therefore, advanced signal-and-data-processing algorithms are proposed. They consist of a proper sample selection algorithm, a Hilbert transformation of the stator-sampled current, and spectral analysis via FFT of the modulus of the resultant time-dependent vector modulus for achieving MCSA efficiently. Experimental results obtained on a 1.1-kW three-phase squirrel-cage induction motor are discussed., This work was supported in part by European Community's Seventh Framework Program FP7/2007-2013 under Grant Agreement 224233 (Research Project PRODI "Power plant Robustification based on fault Detection and Isolation algorithms"), in part by the Spanish "Ministerio de Educacion y Ciencia", in the framework of the "Programa Nacional de proyectos de Investigacion Fundamental", project reference DP12008-06583/DPI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Induction Motor Diagnosis based on a Transient Current Analytic Wavelet Transform via Frequency B-Splines

  • Pons Llinares, Joan|||0000-0003-3756-1242
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Manuel Pineda-Sanchez|||0000-0001-7844-8831
  • Climente Alarcón, Vicente
[EN] In this paper, a new induction motor diagnosis methodology is proposed. The approach is based on obtaining a 2-D time–frequency plot representing the time–frequency evolution of the main components in an electrical machine transient current. The identification of characteristic patterns in the time–frequency plane caused by many of the fault-related components enables a reliable machine diagnosis. Unlike other continuous-wavelet-transform-based methods, this work uses frequency B-spline (FBS) wavelets. It is shown that these wavelets enable an efficient filtering in the region neighboring the main frequency, as well as enable a high level of detail in the time–frequency maps. As a consequence, the evolution of the most important current components is precisely traced. These characteristics make it easy to identify the patterns related to the fault components. The technique is applied to the experimental no-load start-up current of motors in a healthy state and with broken bars; the FBS capabilities are revealed. One of the novelties of this paper is the fact that the diagnosis is carried out via the identification not only of the traditional lower sideband harmonic but also of the upper sideband harmonic and four additional fault-related components., This work was supported by the Spanish "Ministerio de Educacion y Ciencia" in the framework of the "Programa Nacional de proyectos de Investigacion Fundamental" (project reference DPI2008-06583/DPI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simulation of skin effect via separated representations

  • Manuel Pineda-Sanchez|||0000-0001-7844-8831
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Chinesta, F.
  • Roger-Folch, José
  • Pérez-Cruz, Juan
  • Daim, F.
[EN] Purpose - The purpose of this paper is to apply the method of separation of variables to obtain the current distribution in the slot of an electrical machine, taking into account the skin effect. Design/methodology/approach - A slot in an electrical machine, filled with a solid conductor, and fed with an externally imposed density current, presents a current distribution that depends on the skin effect. The magnetic potential vector is formulated and solved using a separate representation as a finite sum of unidimensional (space and time) functions, taking into account the boundary conditions. The proposed method obtains the transient and permanent distribution of the current in the interior of the slot, both in transient and steady regime, and the results at the end of the transient are compared with the analytic ones in permanent regime. Findings - The magnetic potential vector in the interior of a slot filled with a solid conductor can be expressed as a finite sum of just 16 modes, which capture the evolution of the field during the transient and permanent regime. These modes are expressed as the product of space and time functions, which have been obtained automatically by the separation of variables algorithm. Instead of solving multiple field problems, one for each time instant, the proposed method just solves two single-variable differential equations, one in the time domain and other in the spatial one. Research limitations/implications - The application of the proposed method to non-sinusoidal currents, such as those generated by variable speed-drives, would allow to compute the field taking into account both the very small time scale of the pulse width modulation pulses, in the range of kiloHz, and the wide time scale of the currents envelope, in the range of 0-100 Hz. Extension to 2D and 3D spatial configurations is also under consideration. Originality/value - Using the method of separation of variables to solve electromagnetic problems provides a new method which can simplify and speed up the computation of transient fields in multidimensional time and space domains., This work was supported by the Spanish “Ministerio de Educación y Ciencia” in the framework of the “Programa Nacional de Proyectos de Investigación Fundamental”, project reference DPI2008‐06583/DPI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A critical comparison between DWT and Hilbert-Huang-based methods for the diagnosis of rotor bar failures in induction machines

  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Riera-Guasp, Martín|||0000-0003-1327-242X
  • Manuel Pineda-Sanchez|||0000-0001-7844-8831
  • Pérez, Rafael B.
[EN] In this paper, a cutting-edge time-frequency decomposition tool, i.e., the Hilbert-Huang transform (HHT), is applied to the stator startup current to diagnose the presence of rotor asymmetries in induction machines. The objective is to extract the evolution during the startup transient of the left sideband harmonic (LSH) caused by the asymmetry, which constitutes a reliable evidence of the presence of the fault. The validity of the diagnosis methodology is assessed through several tests developed using real experimental signals. Moreover, in this paper, an analytical comparison with an alternative time-frequency decomposition tool, i.e., the discrete wavelet transform (DWT), is carried out. This tool was applied in previous works to the transient extraction of fault-related components, with satisfactory results, even in cases in which the classical Fourier approach does not lead to correct results. The results of the application of the HHT and DWT are analyzed and compared, obtaining novel conclusions about their respective suitability for the transient extraction of asymmetry-related components, as well as the equivalence, with regard to the LSH extraction, between their basic components, namely: 1) intrinsic mode function, for the HHT, and 2) approximation signal for the DWT., This work was supported in part by the Spanish “Ministerio de Educación y Ciencia,” in the framework of the “Programa Nacional de proyectos de Investigación Fundamental,” project reference DPI2008-06583/DPI and in part by “Vicerrectorado de Investigación, Desarrollo e Innovación of the Universidad Politécnica de Valencia” through the Programa de Apoyo a la Investigación y Desarrollo under Contract PAID-06-07.