Pasar al contenido principal

MODELADO Y SIMULACION DEL COMPORTAMIENTO MECANICO DE MATERIALES BLANDOS ANISOTROPOS EN GRANDES DEFORMACIONES

DPI2015-69801-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental data reduction for hyperelasticity

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] WYPiWYG hyperelasticity is a data-driven, model-free computational procedure for finite element analysis of soft materials. The procedure does not assume the shape of the stored energy function and does not employ material parameters, predicting accurately any smooth prescribed behavior from a complete set of experimental tests. However, fuzzy experimental data may yield useless highly oscillatory, unstable stored energy functions, and classical curvature smoothing frequently gives unsatisfactory results. Aside, the possibility of having experimental data from different specimens for the same test was not considered in previous procedures. In this work we present a novel technique based on spline regression and smoothing penalization using stability conditions. In general, this procedure reduces noisy experimental data or data from multiple specimens for ulterior determination of the stored energy. The procedure only needs the solution of a linear system of equations. Instead of classical curvature-based smoothing, we employ a novel stability-based smoothing, determining for each branch of the uniaxial stress-strain curve the most restrictive stability condition during uniaxial and equibiaxial tests. The resulting stored energy functions are smooth and stable. The procedure has little sensitivity to the number of spline segments or to the choice of the penalization parameter, which are computed automatically., Partial financial support for this work has been given by grant DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of the WYPiWYG strain energy density of skin through finite element analysis of the experiments on circular specimens

  • Romero, Xavier
  • Montáns, Francisco Javier
  • Latorre, Marcos|||0000-0003-4142-0207
[EN] Skin is a biological material which mechanical behavior has large variations depending on the individual and the location of the specimen in that individual, among other factors. Large differences are also encountered in measurements between in vivo and in vitro specimens. Then, optimal characterization of the skin for simulation (for example) of surgical procedures requires that all experiments to characterize the material behavior be performed on the same specimen and in vivo if possible. Recent experiments on circular discs (Groves et al., 2013 [16]) permit this characterization using a single specimen as we show in this paper, and may constitute a good starting point for ulterior characterization in vivo. However, because in these tests deformations are not homogeneous, the determination of the material behavior is not as direct as with tensile or biaxial tests, so finite element analysis is needed to propose a procedure to determine the material behavior. In this work we perform an analysis of the experiments using finite elements obtaining an insight which permits a very simple iterative procedure to determine the stress-strain behavior of the material and, thereafter, the corresponding What-YouPrescribe-Is-What-You-Get (WYPiWYG) stored energy densities, Partial financial support for this work has been given by grant DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. The ADINA program license used for this work has been a courtesy of ADINA R & D to the Universidad Politecnica de Madrid. FJM also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which this paper was completed and Ministerio de Educacion, Cultura y Deporte of Spain for the financial support for that stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination and Finite Element Validation of the WYPiWYG Strain Energy of Superficial Fascia from Experimental Data

  • Latorre, Marcos|||0000-0003-4142-0207
  • Peña, Estefanía
  • Montáns, Francisco Javier
[EN] What-You-Prescribe-Is-What-You-Get (WYPIWYG) procedures are a novel and general phenomenological approach to modelling the behavior of soft materials, applicable to biological tissues in particular. For the hyperelastic case, these procedures solve numerically the nonlinear elastic material determination problem. In this paper we show that they can be applied to determine the stored energy density of superficial fascia. In contrast to the usual approach, in such determination no user-prescribed material parameters and no optimization algorithms are employed. The strain energy densities are computed solving the equilibrium equations of the set of experiments. For the case of superficial fascia it is shown that the mechanical behavior derived from such strain energies is capable of reproducing simultaneously the measured load-displacement curves of three experiments to a high accuracy., Partial financial support for this work has been given by Grants DPI2015-69801-R and DPI2013-44391-P from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. F.J. Montans also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which this paper was finished, and Ministerio de Educacion Cultura y Deporte of Spain for the financial support for that stay under Grant PRX15/00065. The ADINA program license used for this work has been a courtesy of ADINA R&D to the Universidad Politecnica de Madrid.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

WYPiWYG hyperelasticity without inversion formula: Application to passive ventricular myocardium

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] WYPiWYG hyperelasticity is a family of computational procedures for determining the stored energy density of soft materials. Instead of assuming the global analytical shape of these functions (the model), they are computed solving numerically the differential equations of a complete set of experimental tests that uniquely define the material behavior. WYPiWYG hyperelasticity traditionally uses an inversion formula to solve the differential equations, which limits the possible types of tests employed in the procedure. In this work we introduce a new method that does not need an inversion formula and that can be used with any type of tests. We apply the new procedure to determine the stored energy function of passive ventricular myocardium from five experimental simple shear tests., Partial financial support for this work has been given by grant DPI2015-69801-R from the Direccion General de Proyectos de Investigation of the Ministerio de Economia y Competitividad of Spain. FJM also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which this paper was finished and that of Ministerio de Educacion, Cultura y Deporte of Spain for the financial support for that stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

WYPiWYG hyperelasticity for isotropic, compressible materials

  • Crespo, José
  • Montáns, Francisco Javier
  • Latorre, Marcos|||0000-0003-4142-0207
[EN] Nowadays the most common approach to model elastic behavior at large strains is through hyperelasticity. Hyperelastic models usually specify the shape of the stored energy function. This shape is modulated by some material parameters that are computed so the predicted stresses best fit the experimental data. Many stored energy functions have been proposed in the literature for isotropic and anisotropic materials, either compressible or incompressible. What-You-Prescribe-Is-What-You-Get (WYPIWYG) formulations present a different approach which may be considered an extension of the infinitesimal framework. The shape of the stored energy is not given beforehand but computed numerically from experimental data solving the equilibrium equations. The models exactly fit the experimental data without any material parameter. WYPIWYG procedures have comparable efficiency in finite element procedures as classical hyperelasticity. In this work we present a WYPIWYG numerical procedure for compressible isotropic materials and we motivate the formulation through an equivalent infinitesimal model., Partial financial support for this work has been given by Grants DPI2011-26635 and DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. F. J. Montans also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which this paper was finished and that of the Ministerio de Educacion, Cultura y Deporte of Spain for the financial support for that stay under Grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling mechano-driven and immuno-mediated aortic maladaptation in hypertension

  • Latorre, Marcos|||0000-0003-4142-0207
  • Humphrey, Jay D.
[EN] Uncontrolled hypertension is a primary risk factor for diverse cardiovascular diseases and thus remains responsible for significant morbidity and mortality. Hypertension leads to marked changes in the composition, structure, properties, and function of central arteries; hence, there has long been interest in quantifying the associated wall mechanics. Indeed, over the past 20 years there has been increasing interest in formulating mathematical models of the evolving geometry and biomechanical behavior of central arteries that occur during hypertension. In this paper, we introduce a new mathematical model of growth (changes in mass) and remodeling (changes in microstructure) of the aortic wall for an animal model of induced hypertension that exhibits both mechano-driven and immuno-mediated matrix turnover. In particular, we present a bilayered model of the aortic wall to account for differences in medial versus adventitial growth and remodeling and we include mechanical stress and inflammatory cell density as determinants of matrix turnover. Using this approach, we can capture results from a recent report of adventitial fibrosis that resulted in marked aortic maladaptation in hypertension. We submit that this model can also be used to identify novel hypotheses to guide future experimentation., This work was supported, in part, by grants from the US NIH: R01 HL105297 (to C.A. Figueroa and J.D. Humphrey), U01 HL116323 (to J.D. Humphrey and G.E. Karniadakis), R01 HL128602 (to J.D. Humphrey, C.K. Breuer, and Y. Wang), P01 HL134605 (to G. Tellides and J.D. Humphrey via a PPG Award to D. Rifkin, NYU), and R03 EB021430 (to J.D. Humphrey); from the Ministerio de Educacion, Cultura y Deporte of Spain: CAS17/00068 (to M. Latorre); and from Universidad Politecnica de Madrid: 'Ayudas al personal docente e investigador para estancias breves en el extranjero 2017' (to M. Latorre). Additional support was given to M. Latorre by grant DPI2015-69801-R from the Direccion General de Proyectos de Investigacion, Ministerio de Economia y Competitividad of Spain (to F.J. Montans and J.M. Benitez). ML gratefully acknowledges the support given by the Department of Biomedical Engineering, Yale University, during his postdoctoral stay
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A continuum model for tension-compression asymmetry in skeletal muscle

  • Latorre, Marcos|||0000-0003-4142-0207
  • Mohammadkhah, Melika
  • Simms, Ciaran K.
  • Montáns, Francisco Javier
[EN] Experiments on passive skeletal muscle on different species show a strong asymmetry in the observed tension-compression mechanical behavior. This asymmetry shows that the tension modulus is two orders of magnitude higher than the compression modulus. Until now, traditional analytical constitutive models have been unable to capture that strong asymmetry in anisotropic solids using the same material parameters. In this work we present a model which is able to accurately capture five experimental tests in chicken pectoralis muscle, including the observed tension-compression asymmetry. However, aspects of the anisotropy of the tissue are not captured by the model., Partial financial support for this work has been given by grant DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. FJM also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which this paper was completed and Ministerio de Educacion, Cultura y Deporte of Spain for the financial support for that stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A mechanobiologically equilibrated constrained mixture model for growth and remodeling of soft tissues

  • Latorre, Marcos|||0000-0003-4142-0207
  • Humphrey, Jay D.
[EN] Growth and remodeling of soft tissues is a dynamic process and several theoretical frameworks have been developed to analyze the time-dependent, mechanobiological and/or biomechanical responses of these tissues to changes in external loads. Importantly, general processes can often be conveniently separated into truly non-steady contributions and steady-state ones. Depending on characteristic times over which the external loads are applied, time-dependent models can sometimes be specialized to respective time-independent formulations that simplify the mathematical treatment without compromising the goodness of the particularized solutions. Very few studies have analyzed the long-term, steady-state responses of soft tissue growth and remodeling following a direct approach. Here, we derive a mechanobiologically equilibrated formulation that arises from a general constrained mixture model. We see that integral-type evolution equations that characterize these general models can be written in terms of an equivalent set of time-independent, nonlinear algebraic equations that can be solved efficiently to yield long-term outcomes of growth and remodeling processes in response to sustained external stimuli. We discuss the mathematical conditions, in terms of orders of magnitude, that yield the particularized equations and illustrate results numerically for general arterial mechano-adaptations., Universidad Politecnica de Madrid; Ministerio de Educacion, Cultura y Deporte of Spain, Grant/Award Number: CAS17/00068; Ministerio de Economia y Competitividad of Spain, Grant/Award Number: DPI2015-69801-R; National Institutes of Health, Grant/Award Numbers: R01HL086418, R01HL105297, R01HL128602, U01HL116323
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the need of the compression branch to characterize hyperelastic materials

  • Latorre, Marcos|||0000-0003-4142-0207
  • De Rosa, Erica
  • Montáns, Francisco Javier
[EN] Soft biological tissues are frequently modeled as hyperelastic materials. Hyperelastic behavior is typically ensured by the assumption of a stored energy function with a pre-determined shape. This function depends on some material parameters which are obtained through an optimization algorithm in order to fit experimental data from different tests. For example, when obtaining the material parameters of isotropic, incompressible models, only the extension part of a uniaxial test is frequently taken into consideration. In contrast, spline-based models do not require material parameters to exactly fit the experimental data, but need the compression branch of the curve. This is not a disadvantage because as we explain herein, to properly characterize hyperelastic materials, the compression branch of the uniaxial tests (or valid alternative tests) is also needed, in general. Then, unless we know beforehand the tendency of the compression branch, a material model should not be characterized only with tensile tests. For simplicity, here we address isotropic, incompressible materials which use the Valanis-Landel decomposition. However, the concepts are also applicable to compressible isotropic materials and are specially relevant to compressible and incompressible anisotropic materials, because in biomechanics, materials are frequently characterized only by tensile tests., Partial financial support for this work has been given by grants DPI2011-26635 and DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. Erica De Rosa acknowledges the funding for a stay at the UPM, Progetto di internazionalizzazione dei corsi di studio from COINOR-Universita Degli Studi di Napoli Federico II. F.J. Montans also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which this paper was finished and that of Ministerio de Educacion, Cultura y Deporte of Spain for the financial support for that stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A new class of plastic flow evolution equations for anisotropic multiplicative elastoplasticity based on the notion of a corrector elastic strain rate

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] We herein present a new continuum theory for both isotropic and anisotropic elastoplasticity at large strains. The new framework has the following properties: (1) It is valid for non-moderate large strains, (2) it is valid for both elastic and plastic anisotropy, (3) its description in rate form is parallel to that of the infinitesimal formulation, (4) it is compatible with the multiplicative decomposition, (5) results in a similar framework in any stress-strain work-conjugate pair, (6) it is consistent with the principle of maximum plastic dissipation and (7) does not impose any restriction on the plastic spin, which must be given as an independent constitutive equation. Furthermore, when formulated using logarithmic strain measures in the intermediate configuration: (8) it may be easily integrated using a classical backward-Euler rule resulting in an additive update. All these properties are obtained simply by considering a plastic evolution in terms of a corrector rate of the proper elastic strain. This new continuum theory is a natural framework for elastoplasticity of both metals and soft materials and solves the (so-coined by Simo) rate issue., Financial support for this work has been given by grants DPI2011-26635 and DPI2015-69801-R from the Direction General de Proyectos de Investigation of the Ministerio de Economia y Competitividad of Spain. FJM also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which part this work was developed and that of the Ministerio de Education, Cultura y Deporte of Spain for the financial support for the sabbatical stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The relevance of transverse deformation effects in modeling soft biological tissues

  • Latorre, Marcos|||0000-0003-4142-0207
  • Romero, Xavier
  • Montáns, Francisco Javier
[EN] Hyperelastic constitutive models for anisotropic biological materials are frequently based on orthotropic incompressible stored energy functions. The material parameters of these models are then obtained through an optimization procedure as to fit some stress-strain experimental data. For example, in arterial wall mechanics the material data usually employed for the Holzapfel-Gasser-Ogden and the Gasser-Ogden-Holzapfel models are two uniaxial tension curves from circumferential and axial specimens. The transverse strains from these specimens are frequently not taken into consideration. In this paper we analyze the evolution of those strains, showing that an unrealistic behaviour may be predicted. We then show how transverse strains may be prescribed using our What-You-Prescribe-Is-What-You-Get (WYPI-VVYG) model in a very intuitive way, still capturing the longitudinal stress-strain behavior in an exact manner without employing any constitutive parameter. This is possible because, in contrast to what it is usually done, we exactly solve the equilibrium and compatibility equations without imposing the shape of the stored energy function. Furthermore, we show that the small strains formulation is naturally recovered and that the physical insight from the infinitesimal theory is preserved. In fact, for incompressible materials, the present approach can be considered as a natural extension of the infinitesimal continuum elastic framework to large strains. This new physical insight clearly shows that if some subclasses of orthotropic incompressible material models are determined with just two uniaxial curves, then the transverse behavior should be contrasted with additional experimental observations. (C) 2016 Elsevier Ltd. All rights reserved., Partial financial support for this work has been given by grants DPI2011-26635 and DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. F.J. Montans also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which part of this work was performed and Ministerio de Educacion, Cultura y Deporte of Spain for the financial suport for that stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Critical roles of time-scales in soft tissue growth and remodeling

  • Latorre, Marcos|||0000-0003-4142-0207
  • Humphrey, Jay D.
[EN] Most soft biological tissues exhibit a remarkable ability to adapt to sustained changes in mechanical loads. These macroscale adaptations, resulting from mechanobiological cellular responses, are important determinants of physiological behaviors and thus clinical outcomes. Given the complexity of such adaptations, computational models can significantly increase our understanding of how contributions of different cell types or matrix constituents, and their rates of turnover and evolving properties, ultimately change the geometry and biomechanical behavior at the tissue level. In this paper, we examine relative roles of the rates of tissue responses and external loading and present a new rate-independent approach for modeling the evolution of soft tissue growth and remodeling. For illustrative purposes, we also present numerical results for arterial adaptations. In particular, we show that, for problems defined by particular characteristic times, this approximate theory captures well the predictions of a fully general constrained mixture theory at a fraction of the computational cost., This work was supported, in part, by NIH Grant Nos. R01 HL086418, U01 HL116323, R01 HL105297, and R01 HL128602 to JDH, and CAS17/00068 (Ministerio de Educacion, Cultura y Deporte of Spain) and "Ayudas al personal docente e investigador para estancias breves en el extranjero 2017" (Universidad Politecnica de Madrid) to M.L. Additional support was given to ML by Grant No. DPI2015-69801-R from the Direccion General de Proyectos de Investigacion (Ministerio de Economia y Competitividad of Spain). ML gratefully acknowledges the support given by the Department of Biomedical Engineering, Yale University, during his postdoctoral stay.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Capturing anisotropic constitutive models with WYPiWYG hyperelasticity, and on consistency with the infinitesimal theory at all deformation levels

  • De Rosa, Erica
  • Montáns, Francisco Javier
  • Latorre, Marcos|||0000-0003-4142-0207
[EN] The elastic nonlinear behavior of fiber-reinforced materials and soft biological tissues is analyzed using anisotropic hyperelastic models. Frequently, these models are not compatible with the corresponding infinitesimal theory, but some of them may be modified to accommodate that theory in the limit. WYPiWYG hyperelasticity is compatible with the infinitesimal theory at all deformation levels and capable of capturing exactly a complete set of experimental data, which reproduces all deformation modes at every strain level, under homogeneous deformations. In this work we study the relevance of recovering the infinitesimal theory at every deformed configuration and also the performance of the WYPiWYG method in predicting the behavior of anisotropic materials at large strains under nonhomogeneous deformations., Partial financial support for this work has been given by grant DPI2015-69801-R from the Direction General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. EDR acknowledges the funding for a stay at the UPM, Progetto di internazionalizzazione dei corsi di studio from COINOR-Universita Degli Studi di Napoli Federico II. FJM also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which part of this paper was performed, and that of Ministerio de Educacion, Cultura y Deporte of Spain for the financial support for that stay under grant PRX15/00065. The ADINA program license used for this work has been a courtesy of ADINA R&D to the UPM
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational anisotropic hardening multiplicative elastoplasticity based on the corrector elastic logarithmic strain rate

  • Sanz, Miguel Á.
  • Montáns, Francisco Javier
  • Latorre, Marcos|||0000-0003-4142-0207
[EN] In this paper we present a new computational framework for anisotropic elastoplasticity with mixed hardening which presents the following characteristics: (1) it is motivated by a one-dimensional rheological model where the main differences are due to geometric nonlinearities and three-dimensional effects; (2) it uses the Lee multiplicative decomposition; (3) it is valid for anisotropic yield functions; (4) it is valid for any anisotropic stored energy, either linear or nonlinear in logarithmic strains; (5) it is valid for (non-moderate) large elastic strains; (6) it results in a six-dimensional additive corrector update, parallel to that of the infinitesimal theory; (7) it does not explicitly employ plastic strain tensors or plastic metrics, circumventing definitely the "rate issue"; (8) the incremental plastic flow is isochoric using a simple backward-Euler scheme, without explicitly using exponential mappings; (9) no hypothesis is needed for the plastic spin in order to integrate the symmetric flow derived from the dissipation equation; (10) the Mandel stress tensor plays no role in the formulation; (11) it yields a fully symmetric algorithmic linearization consistent with its associative nature and the principle of maximum dissipation; and (12) it recovers the formulation of Simd for isotropy as a particular case. (C) 2017 Elsevier B.V. All rights reserved., Partial financial support for this work has been given by grant DPI2015-69801-R from the Direccion General de Proyectos de Investigacion of the Ministerio de Economia y Competitividad of Spain. F.J. Montans also acknowledges the support of the Department of Mechanical and Aerospace Engineering of University of Florida during the sabbatical period in which this paper was finally completed and Ministerio de Educacion, Cultura y Deporte of Spain for the financial support for that stay under grant PRX15/00065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strain-Level Dependent Nonequilibrium Anisotropic Viscoelasticity: Application to the Abdominal Muscle

  • Latorre, Marcos|||0000-0003-4142-0207
  • Montáns, Francisco Javier
[EN] Soft connective tissues sustain large strains of viscoelastic nature. The rate-independent component is frequently modeled by means of anisotropic hyperelastic models. The rate-dependent component is usually modeled through linear rheological models or quasilinear viscoelastic (QLV) models. These viscoelastic models are unable, in general, to capture the strain-level dependency of the viscoelastic properties present in many viscoelastic tissues. In linear viscoelastic models, strain-level dependency is frequently accounted for by including the dependence of multipliers of Prony series on strains through additional evolution laws, but the determination of the material parameters is a difficult task and the obtained accuracy is usually not sufficient. In this work, we introduce a model for fully non-linear viscoelasticity in which the instantaneous and quasi-static behaviors are exactly captured and the relaxation curves are predicted to a high accuracy. The model is based on a fully nonlinear standard rheological model and does not necessitate optimization algorithms to obtain material parameters. Furthermore, in contrast to most models used in modeling the viscoelastic behavior of soft tissues, it is valid for the large deviations from thermodynamic equilibrium typically observed in soft tissues, Secretaria de Estado de Investigacion, Desarrollo e Innovacion (DPI2015-69801-R)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Determination and Finite Element Validation of the WYPIWYG Strain Energy of Superficial Fascia from Experimental Data

  • Latorre, M.
  • Peña, E.
  • Montáns, F.J.
What-You-Prescribe-Is-What-You-Get (WYPIWYG) procedures are a novel and general phenomenological approach to modelling the behavior of soft materials, applicable to biological tissues in particular. For the hyperelastic case, these procedures solve numerically the nonlinear elastic material determination problem. In this paper we show that they can be applied to determine the stored energy density of superficial fascia. In contrast to the usual approach, in such determination no user-prescribed material parameters and no optimization algorithms are employed. The strain energy densities are computed solving the equilibrium equations of the set of experiments. For the case of superficial fascia it is shown that the mechanical behavior derived from such strain energies is capable of reproducing simultaneously the measured load-displacement curves of three experiments to a high accuracy.