Pasar al contenido principal

DEFORMACION Y ROTURA DE GOTAS CON Y SIN SOBRE-ENFRIAMIENTO EN FLUJOS DE INTERES AERONAUTICO

DPI2016-75296-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Breakup criterion for droplets exposed to the unsteady flow generated by an incoming aerodynamic surface

  • López Gavilán, Pablo
  • García-Magariño, Adelaida
  • Sor, Suthyvann
  • Velázquez, Ángel
An experimental and theoretical study is presented on the problem of droplet breakup exposed to a continuously accelerating flow generated by an incoming aerodynamics surface. Droplet breakup experiments were carried out in a rotating arm facility. Droplet diameters were of the order of 1 mm. The maximum velocity of the airfoils located at the end of the rotating arm was 90 m/s. Droplet deformation was computed using a phenomenological model developed previously by the authors. The dynamics of this deformation was coupled to an instability model based on the growth of Rayleigh-Taylor waves at the droplet surface. It was found that, within the experimental uncertainty, breakup occurs when the instability wavelength approaches the droplet hydraulic diameter assuming that it flattens and deforms as an oblate spheroid. This fact allowed for the generation of a theoretical closed-form droplet deformation and breakup model that predicts the onset of breakup with discrepancies of about ±10 % when compared to the experimental results. Finally, as an application case, this closed-form model is used to simulate an actual situation in which the objective is to investigate whether a series of droplets that are approached by an airfoil either impact on its surface, or break prior to collision, or break without colliding, or pass through undamaged., This study has been funded by the Spanish Ministry of Economy and Competitiveness (Ministerio de Economía y Competitividad, MINECO) under research contract DPI2016-75296-P., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Droplet ratio deformation model in combination with droplet breakup onset modeling

  • García-Magariño, Adelaida
  • Sor, Suthyvann
  • Velázquez, Ángel
Copyright © 2020 by Instituto Nacional de Técnica Aeroespacial “Esteban Terradas”. Published by the American Institute of Aeronautics and Astronautics, Inc., with permission. All requests for copying and permission to reprint should be submitted to CCC at www.copyright.com; employ the eISSN 1533-3868 to initiate your request. See also AIAA Rights and Permissions www.aiaa.org/randp., Droplet deformation and breakup in the continuously accelerated flowfield generated by an incoming airfoil have been studied. The upper limit of droplet deformation and the minimum distance to the airfoil model at which the breakup onset takes place have been modeled. Three analytical equations have been developed based on the combination of two models: a droplet deformation and trajectory model for droplets in a continuously accelerated flowfield, and a breakup model for droplets in the vicinity of a leading edge of an airfoil model. The verification was made using experimental data obtained for water droplets whose diameters were in the range from 400 to 1800  μm impinging on airfoils of three different chord sizes moving at velocities from 50 to 90  m/s90  m/s. The rotating arm facility at National Institute of Aerospace Technology was used for this purpose. The analytical equations of the model were in good agreement with the experimental data. The upper limit of droplet deformation was verified by 95.40% of the tested experimental cases, and the minimum distance to the airfoil was verified in 99.65% of the cases., This investigation has been funded by the Ministry de Economy, Industry and Competitiveness of Spain (MINECO), as part of the project DFLOW DPI2016-75296-P. This investigation has also been funded by National Institute of Aerospace Technology, under the project “Termofluidodinámica.”, Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Droplet deformation and trajectory without interferences in the incoming airfoil shoulder region

  • García-Magariño, Adelaida
  • Sor, Suthyvann
  • Velázquez, Ángel
Copyright © 2020 by Instituto Nacional de Técnica Aeroespacial “Esteban Terradas”. Published by the American Institute of Aeronautics and Astronautics, Inc., with permission. All requests for copying and permission to reprint should be submitted to CCC at www.copyright.com; employ the eISSN 1533-385X to initiate your request. See also AIAA Rights and Permissions www.aiaa.org/randp., A new experimental campaign has been conducted in the shoulder region of an incoming airfoil of chord 1050 mm, where droplets are separated enough to neglect interferences between them. Droplets of three sizes (500, 950, and 1250 μmof radius) were allowed to fall in the path of an incoming airfoil while shadowgraph images were recorded by a high-speed video camera at 40,000 fps. The airfoil model was placed at the end of a rotating arm and moved at four velocities (30, 40, 50, and 60 m∕s). Three different regions of the shoulder were tested. Droplet deformation and trajectories are presented. Droplets evolve as a conjunction of two half-oblate spheroids that tilt as the model approaches. The tilting is larger in the higher regions of the shoulder. The trajectory model derived for droplet in the stagnation line of a moving airfoil has been formally derived for the shoulder region and applied to the experimental data, showing very good agreement being the mean discrepancy less than 4% for the trajectory and 10% for the deformation., This investigation has been funded by the Ministry of Economy, Industry and Competitiveness of Spain as part of the project DFLOW DPI2016-75296-P. This has also been funded by the Instituto Nacional de Técnica Aeroespacial, under the project “Termofluidodinámica.” The authors want to thank Mar Urdiales for her valuable help during the processing of the data., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Droplet breakup criterion in airfoils leading edge vicinity

  • García-Magariño, Adelaida
  • Sor, Suthyvann
  • Velázquez, Ángel
Adelaida Garcia-Magariño (0000-0002-6039-8407); Suthyvann Sor (0000-0002-6972-8601); Angel Velazquez (0000-0002-5712-9230)., A new breakup criterion is proposed in this paper for droplets subject to the flowfield generated by an incoming airfoil (that is, the criterion should be applied only to this type of aerodynamics flow). This criterion is based on the study of the characteristic times involved in the problem. These are the characteristic external flowfield variation time and the characteristic droplet deformation time. The criterion takes the shape of an empirical correlation that relates the Weber number at the onset of the breakup to the external flowfield and droplet characteristics. Experimental data on the droplet deformation and breakup tests conducted in a rotating arm facility are used to generate the data used to develop the correlation. Droplets, with diameters in the range of 0.3–3.6 mm, are allowed to fall in the path of an incoming airfoil attached to the end of a rotating arm. Airfoil velocities vary between 50 and 90 m∕s. The airfoil leading-edge radius varies from 0.030 to 0.103 m. Experiments are recorded with a high-speed camera using the shadowgraph illumination technique. The empirical breakup correlation applies to droplets that break in the bag and stamen mode. Some additional limited data on droplets that break in the bag and the shear mode are analyzed to see how they fit into the correlation., "The authors were funded by the Spanish Ministry of Economy and Competitiveness (Ministerio de Economia y Competitividad) under research contract DPI2016-75296-P, and they gratefully acknowledge this support. S. Sor and A. Garcia-Magariño were also funded y the National Institute for Aerospace Technology project titled “Termofluidoninámica.”", Peerreview
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Visualization of water droplet deformation and breakup in a continuously accelerating flow field

  • Garcia-Magariño, Adelaida
  • Sor, Suthyvann
  • Velazquez, Angel
[EN] A new specific direct illumination technique is proposed for studying the deformation and breakup process of droplets that are exposed to a continuously increasing flow field. This type of flow field is in contrast to the traditional shock-tube experiments where droplets are suddenly exposed to a constant high airstream. In order to generate a continuously accelerated flow field the rotating arm facility at INTA is used. Droplets are allowed to fall in the path of an incoming airfoil mounted at the end of a rotating arm. Under certain conditions, these droplet deform and breakup before impinging on the airfoil. The incoming airfoil is a key element in the illumination technique. Droplets of 0.8 mm of diameter immersed in the flow field generated by an airfoil model of chord 0.690m approaching at 80 m/s were chosen for this study and were found to undergo a breakup process similar to the bag and stamen breakup found in the literature. Each of the stages at this type of breakup process was investigated by means of this new direct illumination technique and a high resolution camera. These images were compared to those images obtained using shadowgraph illumination technique and a high speed camera under the same conditions. Five different stages were studied and characterized. The final objective in this study was to visualize and identify fluid structures that occur during the deformation and breakup process in a continuously accelerated flow field in order to develop and fine tune physical-mathematical models., A. Velazquez was funded by the Spanish Ministry of Economy and Competitivenes (Ministerio de Economia y Competitividad) under research contract DPI2016-75296-P and gratefully acknowledges this support. A. GarcíaMagariño was funded by Spanish Ministry of Defense under the INTA program “Termofluidodinámica”.