Pasar al contenido principal

ESTRUCTURAS DE MATERIALES COMPUESTOS REFORZADOS CON FIBRA ANTE CARGAS MULTIAXIALES

DPI2016-77715-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental, numerical, and analytical study on the effect of graphene oxide in the mechanical properties of a solvent-free reinforced epoxy resin

  • Horta Muñoz, Sergio
  • Serna Moreno, María del Carmen
  • González Domínguez, José Miguel
  • Morales-Rodríguez, Pablo Antonio
  • Vázquez, Ester
12 Figuras.- 4 Tablas, This paper presents a methodology for manufacturing nanocomposites from an epoxy resin reinforced with graphene oxide (GO) nanoparticles. A scalable and sustainable fabrication process, based on a solvent-free method, is proposed with the objective of achieving a high level of GO dispersion, while maintaining matrix performance. The results of three-point bending tests are examined by means of an analytical technique which allows determining the mechanical response of the material under tension and compression from flexural data. As result, an increase of 39% in the compressive elastic modulus of the nanocomposite is found with the addition of 0.3 wt % GO. In parallel, we described how the strain distribution and the failure modes vary with the amount of reinforcement based on digital image correlation (DIC) techniques and scanning electron microscopy (SEM). A novel analytical model, capable of predicting the influence of GO content on the elastic properties of the material, is obtained. Numerical simulations considering the experimental conditions are carried out. the full strain field given by the DIC system is successfully reproduced by means of the finite element method (FEM). While, the experimental failure is explained by the crack growth simulations using the eXtended finite element method (XFEM)., This research was supported by the Ministerio de Economía y Competitividad of Spain under research projects DPI2016-77715-R and CTQ2017-88158-R, co-financed by the ERDF (European Regional Development Fund). The financial support of the Castilla-La Mancha Government (JCCM) and the European Social Fund (ESF) through projects SBPLY/16/180501/000263 and SBPLY/17/180501/0002041 is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pseudo-ductility in flexural testing of symmetric ±45° angle-ply CFRP laminates

  • Serna Moreno, M. C.
  • Horta Muñoz, S.
  • Romero Gutiérrez, A.
  • Rappold, Christophe
  • Martínez Vicente, J. L.
  • Morales-Rodríguez, P. A.
  • López Cela, J. J.
12 pages, 10 figures, 3 tables, Pseudo-ductility could be sought in composite structures to avoid their brittle behaviour and, consequently, to withstand higher levels of external loading due to an extended non-linear response. This mechanism has been deeply examined in the literature for angle-ply laminates submitted to uniaxial tests. Nonetheless, the pseudo-ductile effects could appear also under flexural loading because tension and compression are applied in different regions of the cross-sections simultaneously. In this sense, bending testing presents a higher degree of complexity introduced by the variation of the strain through the cross-section thickness. Taking this into account the main scope of this work is to understand, describe, predict and optimise the pseudo-ductile flexural response of symmetric ±45° angle-ply laminates consisting of unidirectional and continuous CFRP plies. The outcome of three-point bending tests is reviewed analytically and experimentally. The analytical study considers the different behaviour of the material under tension and compression as well as the neutral fibre deviation from the mid-height plane. During testing the full normal strain field is acquired by means of a DIC system while strain-rosettes help to complete the data. The post-process based on microscopic characterization using SEM technology allows to observe the procedure of damage initiation and its evolution. Finally, the determination of the stacking sequences that minimise the bending-twisting coupling but favour the pseudo-ductile response is developed applying optimisation techniques with design purposes., This work has been financially supported by the Ministerio de Economía y Competitividad of Spain under the grant DPI2016-77715-R and the program “Ayudas para estancias de investigadores invitados en la UCLM para los años 2016 y 2017" co-funded by the University of Castilla-La Mancha & Fondos FEDER 2014-2020., Peer reviewed