Pasar al contenido principal

PREDICCION PROBABILISTICA DE DAÑO Y FALLO A FATIGA: APLICACION A COMPONENTES Y ESTRUCTURAS DE MATERIALES POLIMERICOS

DPI2016-80389-C2-2-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE OVIEDO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Probabilistic Assessment of Fracture Toughness of Epoxy Resin EPOLAM 2025 Including the Notch Radii Effect

  • Álvarez Vázquez, A.
  • Muñiz Calvante, M.
  • Fernández Fernández, P.
  • Fernández Canteli, A.
  • Lamela Rey, M. J.
  • Pintado, J. M.
Many design scenarios of components made of polymer materials are concerned with notches as representative constructive details. The failure hazard assessment of these components using models based on the assumption of cracked components leads to over-conservative failure estimations. Among the different alternative approaches proposed that are based on the apparent fracture toughness, K N c is considered. In so doing, the current deterministic underlying concept must be replaced by a probabilistic one to take into account the variability observed in the failure results in order to ensure a reliable design. In this paper, an approach based on the critical distance principle is proposed for the failure assessment of notched EPOLAM 2025 CT samples with each different notch radii (ρ) including a probabilistic assessment of the failure prediction. First, each apparent fracture toughness is transformed into the equivalent fracture toughness for ρ = 0 based on the critical distances theory. Then, once all results are normalized to the same basic conditions, a Weibull cumulative distribution function is fitted, allowing the probability of failure to be predicted for different notch radii. In this way, the total number of the specimens tested in the experimental campaign is reduced, whereas the reliability of the material characterization improves. Finally, the applicability of the proposed methodology is illustrated by an example using the own experimental campaign performed on EPOLAM 2025 CT specimens with different notch radii (ρ)., This research was funded by Spanish Minister of Economy and Competitiveness grant number DPI2016-80389-C2-2-R., Peerreview
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Viscoelastic characterization of seven laminated glass interlayer materials from static tests

  • Centelles Soler, Xavier
  • Fernández Fernández, Pelayo
  • Lamela Rey, María Jesús
  • Fernández Renna, Ana Inés
  • Castro Chicot, José Ramón
  • Cabeza, Luisa F.
The mechanical behaviour of laminated glass is strongly affected by the polymeric interlayer placed between glass layers. In general, this interlayer is a viscoelastic material, and therefore it may experience creep and stress relaxation when subjected for an extended period to a constant stress or strain respectively. In this study, seven different commercial interlayer materials (EVALAM, EVASAFE, PVB BG-R20, Saflex DG-41, PVB ES, SentryGlas, and TPU) were evaluated with relaxation tests at different temperatures, in order to build the relaxation master curves through the time-temperature superposition principle. A generalized Maxwell model was chosen to describe the viscoelastic behaviour of the tested materials. This paper includes the coefficients of the Prony series that fit better the experimental results. This paper has two main goals. First, to present the Prony coefficients (ei and τi), which can then be used to create numerical models that take into consideration the time and temperature-dependant behaviour of the interlayer. Second, to provide the two components of the complex modulus (E*(ω)) of each material, the storage modulus (E’(ω)) and the loss modulus (E’’(ω)), which can be obtained from the relaxation modulus (E(t)) by using analytical interconversions., The work was partially funded by CRISTEC with CDTI funds (IDI-20160588). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREiA (2017 SGR 1537) and DIOPMA (2017 SGR 0118). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. The financing support given by the Spanish Ministry of Economy and Competitiveness through the project DPI2016-80389-C2-2-R is gratefully appreciated. Xavier Centelles would like to thank University of Lleida for his research fellowship and to the University of Oviedo for hosting his secondment during 2019.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Viscoelastic characterization of seven laminated glass interlayer materials from static tests

  • Centelles Soler, Xavier
  • Fernández Fernández, Pelayo
  • Lamela Rey, María Jesús
  • Fernández Renna, Ana Inés
  • Castro Chicot, José Ramón
  • Cabeza, Luisa F.
The mechanical behaviour of laminated glass is strongly affected by the polymeric interlayer placed between glass layers. In general, this interlayer is a viscoelastic material, and therefore it may experience creep and stress relaxation when subjected for an extended period to a constant stress or strain respectively. In this study, seven different commercial interlayer materials (EVALAM, EVASAFE, PVB BG-R20, Saflex DG-41, PVB ES, SentryGlas, and TPU) were evaluated with relaxation tests at different temperatures, in order to build the relaxation master curves through the time-temperature superposition principle. A generalized Maxwell model was chosen to describe the viscoelastic behaviour of the tested materials. This paper includes the coefficients of the Prony series that fit better the experimental results. This paper has two main goals. First, to present the Prony coefficients (ei and τi), which can then be used to create numerical models that take into consideration the time and temperature-dependant behaviour of the interlayer. Second, to provide the two components of the complex modulus (E*(ω)) of each material, the storage modulus (E’(ω)) and the loss modulus (E’’(ω)), which can be obtained from the relaxation modulus (E(t)) by using analytical interconversions., The work was partially funded by CRISTEC with CDTI funds (IDI-20160588). The authors would like to thank the Catalan Government for the quality accreditation given to their research groups GREiA (2017 SGR 1537) and DIOPMA (2017 SGR 0118). GREiA and DIOPMA are certified agents TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme. The financing support given by the Spanish Ministry of Economy and Competitiveness through the project DPI2016-80389-C2-2-R is gratefully appreciated. Xavier Centelles would like to thank University of Lleida for his research fellowship and to the University of Oviedo for hosting his secondment during 2019.