Pasar al contenido principal

DISEÑO, CARACTERIZACION Y AJUSTE OPTIMO DE BIOCIRCUITOS SINTETICOS PARA BIOPRODUCCION CON CONTROL DE CARGA METABOLICA

DPI2017-82896-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multicolor plate reader fluorescence calibration

  • Beal, Jacob
  • Telmer, Cheryl A.
  • Baldwin, Geoff S.
  • Hallett, Liam
  • Lee, Taeyang
  • Selvarajah, Vinoo
  • Billerbeck, Sonja
  • Brown, Bradley
  • Cai, Guo-nan
  • Cai, Liang
  • Eisenstein, Edward
  • Kiga, Daisuke
  • Ross, David
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
[EN] Plate readers are commonly used to measure cell growth and fluorescence, yet the utility and reproducibility of plate reader data is limited by the fact that it is typically reported in arbitrary or relative units. We have previously established a robust serial dilution protocol for calibration of plate reader measurements of absorbance to estimated bacterial cell count and for green fluorescence from proteins expressed in bacterial cells to molecules of equivalent fluorescein. We now extend these protocols to calibration of red fluorescence to the sulforhodamine-101 fluorescent dye and blue fluorescence to Cascade Blue. Evaluating calibration efficacy via an interlaboratory study, we find that these calibrants do indeed provide comparable precision to the prior calibrants and that they enable effective cross-laboratory comparison of measurements of red and blue fluorescence from proteins expressed in bacterial cells., This work was supported in part by the following funding sources: J.B. was supported by Air Force Research Laboratory (AFRL) and DARPA contract FA8750-17-C-0184. N.S. was supported by funding from the BBSRC under award BB/M011178/1. G.B., L.H., and T.L. were supported by the EPSRC under award EP/R034915/1 and EP/S022856/1. G.C. and L.C. were supported by funds from YF Capital and the National Top Talent Undergraduate Training Program, China. A.V. and Y.B. were funded by Grant MINECO/AEI, EU DPI2017-82896-C2-1-R and MCIN/AEI/10.13039/501100011033 grant number PID2020117271RB-C21. Y.B. was supported by Secretaria de Educaci ' on Superior, Ciencia, Tecnologia e Innovacion-Ecuador (Scholarship Convocatoria Abierta 2011). D.K. was supported by JST, CREST Grant Number JPMJCR21N4, Japan. E.Y. was supported by the National Science Foundation under Grant No. 1939860. J.T. was supported by the Office of the Director of National Intelligence (ODNI), Intelligence Advanced Research Projects Activity (IARPA) under Finding Engineering Linked Indicators (FELIX) program contract N66001-18-C-4507. This document does not contain technology or technical data controlled under either the U.S. International Traffic in Arms Regulations or the U.S. Export Administration Regulations. Views, opinions, and/or findings expressed are those of the author(s) and should not be interpreted as representing the official views or policies of the Department of Defense or the U.S. Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A latent space-based multivariate capability index: A new paradigm for raw material supplier selection in industry 4.0

  • Borràs-Ferrís, Joan
  • Duchesne, Carl
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] We present a novel Latent Space-based Multivariate Capability Index (LSb-MCpk) aligned with the Quality by Design initiative and used as a criterion for ranking and selecting suppliers for a particular raw material used in a manufacturing process. The novelty of this new index is that, contrary to other multivariate capability indexes that are defined either in the raw material space or in the Critical Quality Attributes (CQAs) space of the product manufactured, this new LSb-MCpk is defined in the latent space connecting both spaces. This endows the new index with a clear advantage over classical ones as it quantifies the capacity of each raw material supplier of providing assurance of quality with a certain confidence level for the CQAs of the manufactured product before manufacturing a single unit of the product. All we need is a rich database with historical information of several raw material properties along with the CQAs. Besides, we present a novel methodology to carry out the diagnosis for assignable causes when a supplier does not score a good capability index. The proposed LSb-MCpk is based on Partial Least Squares (PLS) regression, and it is illustrated using data from both an industrial and a simulation study., This work was partially funded by the Valencian Regional Government: Consellería de Educacion, Universidades y Empleo (CIAICO/ 2023/189), the Spanish Ministry of Economy, Industry and Competitiveness (DPI2017-82896-C2-1-R), and the European Social Fund (ACIF/ 2018/165).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiobjective Identification of a Feedback Synthetic Gene Circuit

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Kinetic (i.e., dynamic) semimechanistic models based on the first principles are particularly important in systems and synthetic biology since they can explain and predict the functional behavior that emerges from the time-varying concentrations in cellular components. However, gene circuit models are nonlinear higher order ones and have a large number of parameters. In addition, experimental measurements are often scarce, and enough signal excitability for identification cannot always be achieved. These characteristics render the identification problem ill-posed, so most gene circuit models present incomplete parameter identifiability. Thus, parameter identification of typical biological models still appears as an open problem, where ensemble modeling approaches and multiobjective optimization arise as natural options. We address the problem of identifying the stochastic model of a closed-loop synthetic genetic circuit designed to minimize the gene expression noise. The model results from the feedback interaction between two subsystems. Besides incomplete parameter identifiability, the closed-loop dynamics cannot be directly identified due to the lack of enough input signal excitability. We apply a two-stage approach. First, the open-loop averaged time-course experimental data are used to identify a reduced-order stochastic model of the system direct chain. Then, closed-loop steady-state stochastic distributions are used to identify the remaining parameters in the feedback configuration. In both cases, multiobjective optimization is used to address the parameter identifiability, providing sets of parameters valid for different state-space regions. The methodology gives good identification results, provides clear guidelines on the effect of the parameters under different scenarios, and it is particularly useful for easily combining time-course population averaged and steady-state single-cell distribution experimental data., This work was supported by the European Union and Spanish Government, MINECO/AEI/FEDER under Grant DPI2017-82896-C2-1-R. The work of Y. Boada was supported by the Universitat Politecnica de Valencia under Grant FPI/2013-3242.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of multivariate image analysis for on-line monitoring of a freeze-drying process for pharmaceutical products in vials

  • Colucci, D.
  • Fisore, D.
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] A new Process Analytical Technology (PAT) has been developed and tested for on-line process monitoring of a vacuum freeze-drying process. The sensor uses an infrared camera to obtain thermal images of the ongoing process and multivariate image analysis (MIA) to extract the information. A reference model was built and different kind of anomalous events were simulated to test the capacity of the system to promptly identify them. Two different data structures and two different algorithms for the imputation of the missing information have been tested and compared. Results show that the MIA-based PAT system is able to efficiently detect on-line undesired events occurring during the vacuum freeze-drying process., The authors would like to acknowledge Elena Lietta for her support in the experimental investigation. This research work was partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under the project DPI2017-82896-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On-line product quality and process failure monitoring in freeze-drying of pharmaceutical products

  • Colucci, Domenico
  • Fissore, Davide
  • Prats-Montalbán, José Manuel|||0000-0001-6294-4486
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] In this work the information provided by a noninvasive imaging sensor was used to develop two algorithms for real time fault detection and product quality monitoring during the Vacuum Freeze-Drying of single dose pharmaceuticals. Two algorithms based on multivariate statistical techniques, namely Principal Component Analysis and Partial Least Square Regression, were developed and compared. Five batches obtained under Normal Operating Conditions were used to train a reference model of the process; the classification abilities of these algorithms were tested on five more batches simulating different kind of faults. Good classification performances have been obtained with both algorithms. Coupling the information obtained from an infrared camera with that of other variables obtained from the PLC of the equipment, and from the textural analysis performed on the RGB images of the product, strongly improves the performances of the algorithms. The proposed algorithms can account for the heterogeneity of the batch and aim to reduce the off-specification products., This research work was partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under the project DPI2017-82896-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Multi-Scale Host-Aware Modeling for Analysis and Tuning of Synthetic Gene Circuits for Bioproduction

  • Santos Navarro, Fernando Nóbel
[ES] Esta Tesis ha sido dedicada al modelado multiescala considerando al anfitrión celular para el análisis y ajuste de circuitos genéticos sintéticos para bioproducción. Los objetivos principales fueron: 1. El desarrollo de un modelo que considere el anfitrión celular de tamaño reducido enfocado para simulación y análisis. 2. El desarrollo de herramientas de programación para el modelado y la simulación, orientada a la biología sintética. 3. La implementación de un modelo multiescala que considere las escalas relevantes para la bioproducción (biorreactor, célula y circuito sintético). 4. El análisis del controlador antitético considerando las interacciones célula-circuito, como ejemplo de aplicación de las herramientas desarrolladas. 5. El desarrollo y la validación experimental de leyes de control robusto para biorreactores continuos. El trabajo presentado en esta Tesis cubre las tres escalas del proceso de bioproducción. La primera escala es el biorreactor: esta escala considera la dinámica macroscópica del sustrato y la biomasa, y como estas dinámica se conecta con el estado interno de las células. La segunda escala es la célula anfitriona: esta escala considera la dinámica interna de la célula y la competencia por los recursos limitados compartidos para la expresión de proteínas. La tercera escala es el circuito genético sintético: esta escala considera la dinámica de expresión de los circuitos sintéticos exógenos y la carga que inducen en la célula anfitriona. Por último, como <<cuarta>> escala, parte de la Tesis se ha dedicado a desarrollar herramientas de software para el modelado y la simulación. Este documento se divide en siete capítulos. El Capítulo 1 es una introducción general al trabajo de la Tesis y su justificación; también presenta un mapa visual de la Tesis y enumera las principales contribuciones. El Capítulo 2 muestra el desarrollo del modelo del anfitrión celular (los Capítulos 4 y 5 hacen uso de este modelo para sus simulaciones). El Capítulo 3 presenta OneModel: una herramienta de software desarrollada en la Tesis que facilita el modelado y la simulación en biología sintética, en particular, facilita el uso del modelo del anfitrión celular. El Capítulo 4 utiliza el modelo del anfitrión celular para montar el modelo multiescala que considera el biorreactor y analiza el título, la productividad y el rendimiento en la expresión de una proteína exógena. El Capítulo 5 analiza un circuito más complejo, el recientemente propuesto y muy citado controlador biomolecular antitético, utilizando el modelo del anfitrión celular. El Capítulo 6 muestra el diseño de estrategias de control no lineal que permiten controlar la concentración de biomasa en un biorreactor continuo de forma robusta. El Capítulo 7 resume y presenta las principales conclusiones de la Tesis. En el Apéndice A se muestra el desarrollo teórico del modelo del anfitrión celular. Esta Tesis destaca la importancia de estudiar la carga celular en los sistemas biológicos, ya que estos efectos son muy notables y generan interacciones entre circuitos aparentemente independientes. La Tesis proporciona herramientas para modelar, simular y diseñar circuitos genéticos sintéticos teniendo en cuenta estos efectos de carga y permite el desarrollo de modelos que conecten estos fenómenos en los circuitos genéticos sintéticos, que van desde la dinámica intracelular de la expresión génica hasta la dinámica macroscópica de la población de células dentro del biorreactor., [CA] Aquesta Tesi tracta del modelat multiescala considerant l'amfitrió ce\lgem ular per a l'anàlisi i ajust de circuits genètics sintètics per a bioproducció. Els objectius principals van ser: 1. El desenvolupament d'un model de grandària reduïda que considere l'amfitrió ce\lgem ular, enfocat al seu ús en simulació i anàlisi. 2. El desenvolupament d'eines de programari per al modelatge i la simulació, orientada a la biologia sintètica. 3. La implementació d'un model multiescala que considere les escales rellevants per a la bioproducció (bioreactor, cè\lgem ula i circuit sintètic). 4. L'anàlisi del controlador antitètic considerant les interacciones cè\lgem ula-circuit, com a exemple d'aplicació de les eines desenvolupades. 5. El desenvolupament i la validació experimental de lleis de control robust per a bioreactors continus. El treball presentat en aquesta Tesi cobreix les tres escales del procés de bioproducció. La primera escala és el bioreactor: aquesta escala considera la dinàmica macroscòpica del substrat i la biomassa, i com aquestes dinàmiques es connecten amb l'estat intern de les cè\lgem ules. La segona escala és la cè\lgem ula amfitriona: aquesta escala considera la dinàmica interna de la cè\lgem ula i la competència pels recursos limitats compartits per a l'expressió de proteïnes. La tercera escala és la del circuit genètic sintètic: aquesta escala considera la dinàmica d'expressió de circuits sintètics exógens i la càrrega que indueixen en la cè\lgem ula amfitriona. Finalment, com a <<quarta>> escala, part de la Tesi s'ha dedicat a desenvolupar eines de programari per al modelatge i la simulació. Aquest document es divideix en set capítols. El Capítol 1 és una introducció general al treball de la Tesi i la seua justificació; també presenta un mapa visual de la Tesi i enumera les principals contribucions. El Capítol 2 mostra el desenvolupament del model de l'amfitrió ce\lgem ular (els Capítols 4 i 5 fan ús d'aquest model per a les seues simulacions). El Capítol 3 presenta OneModel: una eina de programari desenvolupada en la Tesi que facilita el modelatge i la simulació en biologia sintètica, en particular, facilita l'ús del model de l'amfitrió ce\lgem ular. El Capítol 4 utilitza el model de l'amfitrió ce\lgem ular per a muntar el model multiescala que considera el bioreactor i analitza el títol, la productivitat i el rendiment en l'expressió d'una proteïna exògena. El Capítol 5 analitza un circuit més complex, el recentment proposat i molt citat controlador biomolecular antitètic, utilitzant el model de l'amfitrió ce\lgem ular. El Capítol 6 mostra el disseny d'estratègies de control no lineal que permeten controlar la concentració de biomassa en un bioreactor continu de manera robusta. El Capítol 7 resumeix i presenta les principals conclusions de la Tesi. En l'Apèndix A es mostra el desenvolupament teòric del model de l'amfitrió ce\lgem ular. Aquesta Tesi destaca la importància d'estudiar la càrrega ce\lgem ular en els sistemes biològics, ja que aquests efectes són molt notables i generen interaccions entre circuits aparentment independents. La Tesi proporciona eines per a modelar, simular i dissenyar circuits genètics sintètics tenint en compte aquests efectes de càrrega i permet el desenvolupament de models que connecten aquests fenòmens en els circuits genètics sintètics, que van des de la dinàmica intrace\lgem ular de l'expressió gènica fins a la dinàmica macroscòpica de la població de cè\lgem ules dins del bioreactor., [EN] This Thesis was devoted to the multi-scale host-aware analysis and tuning of synthetic gene circuits for bioproduction. The main objectives were: 1. The development of a reduced-size host-aware model for simulation and analysis purposes. 2. The development of a software toolbox for modeling and simulation, oriented to synthetic biology. 3. The implementation of a multi-scale model that considers the scales relevant to bioproduction (bioreactor, cell, and synthetic circuit). 4. The host-aware analysis of the antithetic controller, as an example of the application of the developed tools. 5. The development and experimental validation of robust control laws for continuous bioreactors. The work presented in this Thesis covers the three scales of the bioproduction process. The first scale is the bioreactor: this scale considers the macroscopic substrate and biomass dynamics and how these dynamics connect to the internal state of the cells. The second scale is the host cell: this scale considers the internal dynamics of the cell and the competition for limited shared resources for protein expression. The third scale is the synthetic genetic circuit: this scale considers the dynamics of expressing exogenous synthetic circuits and the burden they induce on the host cell. Finally, as a <<fourth>> scale, part of the Thesis was devoted to developing software tools for modeling and simulation. This document is divided into seven chapters. Chapter 1 is an overall introduction to the Thesis work and its justification; it also presents a visual map of the Thesis and lists the main contributions. Chapter 2 shows the development of the host-aware model (Chapters 4 and 5 make use of this model for their simulations). Chapter 3 presents OneModel: a software tool developed in the Thesis that facilitates modeling and simulation for synthetic biology---in particular, it facilitates the use of the host-aware model---. Chapter 4 uses the host-aware model to assemble the multi-scale model considering the bioreactor and analyzes the titer, productivity (rate), and yield in expressing an exogenous protein. Chapter 5 analyzes a more complex circuit, the recently proposed and highly cited antithetic biomolecular controller, using the host-aware model. Chapter 6 shows the design of nonlinear control strategies that allow controlling the concentration of biomass in a continuous bioreactor in a robust way. Chapter 7 summarizes and presents the main conclusions of the Thesis. Appendix A shows the theoretical development of the host-aware model. This Thesis emphasizes the importance of studying cell burden in biological systems since these effects are very noticeable and generate interactions between seemingly unconnected circuits. The Thesis provides tools to model, simulate and design synthetic genetic circuits taking into account these burden effects and allowing the development of models that connect phenomena in synthetic genetic circuits, ranging from the intracelullar dynamics of gene expression to the macroscopic dynamics of the population of cells inside the bioreactor., This research was funded by MCIN/AEI/10.13039/501100011033 grant number PID2020-117271RB-C21, and MINECO/AEI, EU grant number DPI2017-82896- C2-1-R. The author was recipient of the grant “Programa para la Formación de Personal Investigador (FPI) de la Universitat Politècnica de València — Subprograma 1 (PAID-01-2017)”. The author was also a grantee of the predoctoral stay “Ayudas para Movilidad de Estudiantes de Doctorado de la Universitat Politècnica de València 2019”. The Control Theory and Systems Biology Lab of the ETH Zürich is acknowledged for accepting the author in their facilities as predoctoral stay and their valuable collaboration sharing knowledge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved formulation of the latent variable model inversion¿based optimization problem for quality by design applications

  • Palací-López, Daniel
  • Villalba-Torán, Pedro Miguel
  • Facco, Pierantonio
  • Barolo, Massimiliano
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Latent variable regression model (LVRM) inversion is a relevant tool for finding, if they exist, different combinations of manufacturing conditions that yield the desired process outputs. Finding the best manufacturing conditions can be done by optimizing an appropriately formulated objective function using nonlinear programming. To this end, different formulations of the optimization problem based on LVRM inversion have been proposed in the literatura that allow the use of happenstance data (eg, historical data) for this purpose, present lower computational costs than optimizing in the space of the original variables, and guarantee that the solution will conform to the correlation structure of available data from the past. However, these approaches, as presented, suffer from some limitations, such as having to actively modify the constraints imposed on the solution to achieve different sets of conditions to those available in the LVRM calibration dataset, or the lack of a standardized approach for optimizing a linear combination of variables. Furthermore, when minimizing or maximizing one or more outputs, a severe handicap is also present related to the definition of arbitrarily low or high "desired" values. This paper aims at tackling all of these issues. The resulting proposed formulation of the optimization problem is illustrated with three case studies., Agencia Estatal de Investigacion, Grant/Award Number: DPI2017-82896-C2-1-R; European Regional Development Fund; Ministerio de Economia, Industria y Competitividad, Gobierno de Espana; Universitat Politecnica de Valencia, Grant/Award Number: Erasmus 2014.93231
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

How to Simulate Outliers with the Desired Properties

  • González-Cebrián, A.
  • Arteaga, Francisco
  • Folch-Fortuny, Abel
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Deviating multivariate observations are used typically to test the performance of outlier detection methods. Yet, the generation of outlying cases itself usually appears as a secondary methodological step in methods comparison. In the literature, outliers are defined using certain distribution parameters which differ from those of the clean or reference data. However, these parameters change among authors, leading to a lack of a standard and measurable definition of the characteristics simulated outliers. This makes the comparison between methods hard and its results dependent on the procedure followed to simulate the data. In order to set a standard procedure, a framework to simulate outliers is defined here. Since it is based on certain specifications for both the Squared Prediction Error (SPE) and Hotelling's T2 statistics from a Principal Component Analysis (PCA) model, tuning them becomes a simple and efficient task. This procedure has been implemented in a set of Matlab functions., Financial support was granted by the Research and Development Support Programme PAID-01-17 of the UPV and also by the Spanish Ministry of Economy and Competitiveness under the project DPI2017-82896-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Output Feedback Linearization of Turbidostats After Time Scaling

  • De Battista, Hernán
  • Picó-Marco, Enric
  • Santos-Navarro, Fernando Nóbel
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Turbidostats are a class of bioreactors gaining interest due to the recent availability of microscale and small-scale devices for characterization and scalingup of the biotechnological systems relevant in the biotech and pharma industries. The goal is to keep cell density constant in continuous operation. Thus, the control law, i.e., the substrate feeding strategy, must guarantee global or semiglobal convergence to an equilibrium point. However, their control is difficult due to the uncertain, time varying, and nonlinear nature of the processes involved. In this brief, we propose an adaptive control law that globally stabilizes the desired biomass setpoint. Furthermore, in a certain region of the state space, the controller linearizes the dynamic behavior after some time scaling. By this way, the orbits of the closedloop system are imposed by the designer. The intrinsic integral action of the gain adaptation rejects the parameter uncertainties. Moreover, the controller implementation only assumes the biomass concentration to be measured. Both the simulated and experimental results show the performance of the controller., This work was supported in part by the National University of La Plata under Grant 11-I127, in part by ANPCyT under Grant PICT2014 2394, in part by CONICET under Grant PIP112 2015 0837, and in part by MINECO/AEI/FEDER, UE under Grant DPI2014-55276-C5-1-R and Grant DPI2017-82896-C2-1-R. The work of F. N. Santos-Navarro was supported by ai2-UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alkylation of a hydrophilic photosensitizer enhances the contact-dependent photo-induced oxidation of phospholipid membranes

  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Layana, Carla
  • Junqueira, Helena C.
  • Thomas, Andrés H.
  • Itri, Rosangela
  • Baptista, Mauricio S.
  • Vignoni, Mariana
[EN] Lipophilic photosensitizers able to photo-induce lipid oxidation in biomembranes are, in general, much more efficient than hydrophilic ones; acting through the formation of singlet oxygen (O-1(2)), which oxidizes the fatty acid double bonds (type II mechanism). Here we investigate the binding and photosensitizing properties of 4-(decyloxy)pteridin-2-amine (O-decyl-Ptr) using unilamellar vesicles of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), a phospholipid with monounsaturated fatty acids. By means of molecular dynamic (MD) simulations, we showed that O-decyl-Ptr binds to the membrane in a localization that favors the direct reaction of the triplet excited state of O-decyl-Ptr with DOPC double bonds. As a consequence, although O-1(2) is formed, O-decyl-Ptr acts mainly as a contact-dependent photosensitizer, meaning through radical formation (type I mechanism). Mass spectrometry analysis of vesicles irradiated in the presence of O-decyl-Ptr, demonstrated the generation of alcohols (LOH), ketones (LO) and hydroperoxides (LOOH). In agreement with the mechanistic hypothesis proposed, LOH and LO (type I photooxidation products) are formed faster than LOOH (type II photooxidation product). Interestingly, no short-chain oxidized products were detected. Accordingly, membrane fluctuations and formation of filaments and buds are observed during in-situ photo-activation of O-decyl-Ptr in giant unilamellar vesicles due to changes in membrane spontaneous curvature. Finally, we evaluated the effect of the photochemical processes studied at a cellular level and demonstrated in experiments of viability of mammalian cells that O-decyl-Ptr has important photodynamic properties. Similar experiments performed using the hydrophilic photosenstizer pterin (Ptr) show that alkylation leads to a striking increase in the efficiency of photosensitized lipid oxidation., This work was partially supported by ANPCyT (Grants PICT 2016-1189 and 2017-0925), CONICET (PIP 2017-0274 and P-UE 2017 22920170100100CO), UNLP (Grant 11/X840), FAPESP (Process 2012/50680-5 and 2013/07937-8), Spanish MINECO/AEI and EU (Grant DPI2017-82896-C2-1-R) and Universitat Politecnica de Valencia. M.V. thanks FAPESP for the Visiting Researcher Grant (2016/04296-0 and 2019/12957-4). The authors gratefully acknowledge the Scientific Computing Facility RIGEL from UPV, where MD simulation were performed, and Nathalie Martins-Froment (Service Commun de Spectrometrie de Masse (FR2599), Universite de Toulouse III (Paul Sabatier)) and Patricia Vicendo (IMRCP de Toulouse III (Paul Sabatier), Grant PICS 05920) for their contribution in mass spectrometry. R.I. and M.S.B. are recipients of The National Council for Scientific and Technological Development (CNPq, Brazil) research fellowship. A.H.T., C.L. and M.V. are research members of CONICET.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

RBS and Promoter Strengths Determine the Cell-Growth-Dependent Protein Mass Fractions and Their Optimal Synthesis Rates

  • Santos-Navarro, Fernando Nóbel
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Models of gene expression considering host-circuit interactions are relevant for understanding both the strategies and associated trade-offs that cell endogenous genes have evolved and for the efficient design of heterologous protein expression systems and synthetic genetic circuits. Here, we consider a small-size model of gene expression dynamics in bacterial cells accounting for host-circuit interactions due to limited cellular resources. We define the cellular resources recruitment strength as a key functional coefficient that explains the distribution of resources among the host and the genes of interest and the relationship between the usage of resources and cell growth. This functional coefficient explicitly takes into account lab-accessible gene expression characteristics, such as promoter and ribosome binding site (RBS) strengths, capturing their interplay with the growth-dependent flux of available free cell resources. Despite its simplicity, the model captures the differential role of promoter and RBS strengths in the distribution of protein mass fractions as a function of growth rate and the optimal protein synthesis rate with remarkable fit to the experimental data from the literature for Escherichia coli. This allows us to explain why endogenous genes have evolved different strategies in the expression space and also makes the model suitable for model-based design of exogenous synthetic gene expression systems with desired characteristics., This work was partially supported by grants MINECO/AEI, EU DPI2017-82896-C2-1-R, and MCIN/AEI/10.13039/501100011033 grant number PID2020-117271RB-C21. F.N.S.-N. is grateful to grant PAID-01-2017 (Universitat Politecnica de Valencia). The authors are very grateful to the anonymous reviewers for their comprehensive and in-depth reviews.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A graphical user interface for PCA-based MSPC: A benchmark software for multivariate statistical process control in MATLAB

  • Villalba-Torán, Pedro Miguel
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] A Graphical User Interface (GUI) is developed in MATLAB as a tutorial for understanding the PCA-based MSPC strategy. The software allows users to analyze both simulated and external data sets. Simulated data are obtained from a nonlinear model of a binary distillation column implemented in Simulink. The nonlinear model has four manipulated variables, four controlled variables and three input measured disturbances, plus 41 M fractions corresponding to every column stage. The methodology for PCA-based MSPC is implemented in two phases. During Phase I, the user can simulate the distillation column under normal operating conditions at three different operating points. When the simulation is finished, the GUI obtains the corresponding PCA model automatically. In Phase II, the user can simulate several scenarios with different combinations of disturbances and failures and monitor them using Squared Prediction Error (SPE) and T-2 control charts. Contribution plots are used to diagnose the original variables responsible of such abnormal situations. The software also incorporates the possibility to analyze external multivariate process datasets., Research in this study was partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under the grant DPI2017-82896-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multivariate six sigma: A key improvement strategy in industry 4.0

  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] This article aims to generate a reflection on the changes that need to be made in the Six Sigma strategy so that it continues to be a successful improvement strategy capable of facing the new challenges derived from Industry 4.0., This research work was partially supported by the Spanish Ministry of Economy, Industry and Competitiveness under the project DP I2017-82896-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Defining multivariate raw material specifications in industry 4.0

  • Borràs-Ferrís, Joan
  • Palací-López, Daniel
  • Duchesne, Carl
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] A novel methodology is proposed for defining multivariate raw material specifications providing assurance of quality with a certain confidence level for the critical to quality attributes (CQA) of the manufactured product. The capability of the raw material batches of producing final product with CQAs within specifications is estimated before producing a single unit of the product, and, therefore, can be used as a decision making tool to accept or reject any new supplier raw material batch. The method is based on Partial Least Squares (PLS) model inversion taking into account the prediction uncertainty and can be used with historical/happenstance data, typical in Industry 4.0. The methodology is illustrated using data from three real industrial processes., This work was partially funded by the Valencian Regional Government: Direccion General de Ciencia e Investigacion (AICO/2021/111), the Spanish Ministry of Economy, Industry and Competitiveness (DPI2017-82896-C2-1-R), and the European Social Fund (ACIF/2018/165).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Discussion of &quot, A review of data science in business and industry and a future view&quot, by Grazia Vicario and Shirley Coleman

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gene Expression Space Shapes the Bioprocess Trade-Offs among Titer, Yield and Productivity

  • Santos-Navarro, Fernando Nóbel
  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
[EN] Optimal gene expression is central for the development of both bacterial expression systems for heterologous protein production, and microbial cell factories for industrial metabolite production. Our goal is to fulfill industry-level overproduction demands optimally, as measured by the following key performance metrics: titer, productivity rate, and yield (TRY). Here we use a multiscale model incorporating the dynamics of (i) the cell population in the bioreactor, (ii) the substrate uptake and (iii) the interaction between the cell host and expression of the protein of interest. Our model predicts cell growth rate and cell mass distribution between enzymes of interest and host enzymes as a function of substrate uptake and the following main lab-accessible gene expression-related characteristics: promoter strength, gene copy number and ribosome binding site strength. We evaluated the differential roles of gene transcription and translation in shaping TRY trade-offs for a wide range of expression levels and the sensitivity of the TRY space to variations in substrate availability. Our results show that, at low expression levels, gene transcription mainly defined TRY, and gene translation had a limited effect; whereas, at high expression levels, TRY depended on the product of both, in agreement with experiments in the literature., This research was partially supported by grants MINECO/AEI, EU DPI2017-82896-C21-R 662 and MICINN/AEI, EU PID2020-117271RB-C21. F.N.S.-N. thanks the UPV grant number PAID-01-2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multivariate Six Sigma: A Case Study in Industry 4.0

  • Palací-López, Daniel
  • Borràs-Ferrís, Joan
  • da Silva de Oliveria, Larissa Thaise
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The complex data characteristics collected in Industry 4.0 cannot be efficiently handled by classical Six Sigma statistical toolkit based mainly in least squares techniques. This may refrain people from using Six Sigma in these contexts. The incorporation of latent variables-based multivariate statistical techniques such as principal component analysis and partial least squares into the Six Sigma statistical toolkit can help to overcome this problem yielding the Multivariate Six Sigma: a powerful process improvement methodology for Industry 4.0. A multivariate Six Sigma case study based on the batch production of one of the star products at a chemical plant is presented.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Data-driven supervised fault diagnosis methods based on latent variable models: a comparative study

  • Vidal-Puig, Santiago|||0000-0002-8339-1136
  • Ferrer, Alberto|||0000-0001-7244-5947
  • Vitale, Raffaele
[EN] A comparison among widely used multivariate latent variable-based techniques for supervised process fault diagnosis was carried out. In order to assess their overall performance several diagnosis criteria were proposed (C-1: most suspected fault assignment; C-2: threshold-based fault assignment). Additionally, it was evaluated i) how the size of the training set used to build the latent variable models affected the diagnosis ability of the methods under study, ii) how they behaved under new types of failures not included in the original list of fault candidates and iii) which of them were more suitable for either early or late diagnosis. To accomplish all these objectives, the approaches were tested in different scenarios. Two datasets were analysed: the first was generated by a Simulink-based model of a binary distillation column, while the second relates to a pasteurisation process performed in a laboratory-scale plant., This research work was partially supported by the Spanish Ministry of Economy and Competitiveness under the project DPI2017-82896-C2-1-R and Shell Global Solutions International B.V. (Amsterdam, The Netherlands).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MVBatch: A matlab toolbox for batch process modeling and monitoring

  • González Martínez, Jose María
  • Camacho Paez, Jose
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] A novel user-friendly graphical interface for process understanding, monitoring and troubleshooting has been developed as a freely available MATLAB toolbox, called the MultiVariate Batch (MVBatch) Toolbox. The main contribution of this software package is the integration of recent developments in Principal Component Analysis (PCA) based Batch Multivariate Statistical Process Monitoring (BMSPM) that overcome modeling problems such as missing data, different speed of process evolution and length of batch trajectories, and multiple stages. An interactive user interface is provided, which aims to guide users in handling batch data through the main BMSPM steps: data alignment, data modeling, and the development of monitoring schemes. In addition, a small-scale non-linear dynamic simulator of the fermentation process of the Saccharomyces cerevisiae cultivation is available to generate realistic batch data under normal and abnormal operating conditions. This generator of synthetic data can be used for teaching purposes or as a benchmark to illustrate and compare the performance of new methods with sound techniques published in the field of BMSPM., This work is partially supported by the Spanish Ministry of Economy and Competitiveness and FEDER funds through the projects DPI2017-82896-C2-1-R and TIN2017-83494-R. Authors also acknowledge the volunteers to test MVBatch and report their impressions for this software tutorial.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Extended metabolic biosensor design for dynamic pathway regulation of cell factories

  • Boada-Acosta, Yadira Fernanda|||0000-0001-5677-2702
  • Vignoni, Alejandro|||0000-0001-9977-7132
  • Picó, Jesús|||0000-0003-4144-3521
  • Carbonell, Pablo|||0000-0002-0993-5625
[EN] Transcription factor-based biosensors naturally occur in metabolic pathways to maintain cell growth and to provide a robust response to environmental fluctua-tions. Extended metabolic biosensors, i.e., the cascading of a bio-conversion pathway and a transcription factor (TF) responsive to the downstream effector metabolite, provide sensing capabilities beyond natural effectors for implement-ing context-aware synthetic genetic circuits and bio-observers. However, the engineering of such multi-step circuits is challenged by stability and robustness issues. In order to streamline the design of TF-based biosensors in metabolic pathways, here we investigate the response of a genetic circuit combining a TF-based extended metabolic biosensor with an antithetic integral circuit, a feed-back controller that achieves robustness against environmental fluctuations. The dynamic response of an extended biosensor-based regulated flavonoid pathway is analyzed in order to address the issues of biosensor tuning of the regulated pathway under industrial biomanufacturing operating constraints., This work is partially supported by grant MINECO/AEI and EU DPI2017-82896-C2-1-R. P.C. acknowledges support from the Universitat Politecnica de Valencia Talento Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Divide et impera: How disentangling common and distinctive variability in multiset data analysis can aid industrial process troubleshooting and understanding

  • Vitale, Raffaele
  • Noord, Onno E. de
  • Westerhuis, Johan A.
  • Smilde, Age K.
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The possibility of addressing the problem of process troubleshooting and understanding by modelling common and distinctive sources of variation (factorsorcomponents) underlying two sets of measurements was explored in a real-world industrial case study. The used strategy includes a novel approach to systematically detect the number of common and distinctive components. An extension of this strategy for the analysis of a larger number of data blocks, which allows the comparison of data from multiple processing units, is also discussed., Spanish Ministry of Economy and Competitiveness, Grant/Award Number: DPI2017-82896-C2-1-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Automated engineering of synthetic metabolic pathways for efficient biomanufacturing

  • Otero-Muras, Irene
  • Carbonell, Pablo
20 pages, 6 figures, 3 tables, Metabolic engineering involves the engineering and optimization of processes from single-cell to fermentation in order to increase production of valuable chemicals for health, food, energy, materials and others. A systems approach to metabolic engineering has gained traction in recent years thanks to advances in strain engineering, leading to an accelerated scaling from rapid prototyping to industrial production. Metabolic engineering is nowadays on track towards a truly manufacturing technology, with reduced times from conception to production enabled by automated protocols for DNA assembly of metabolic pathways in engineered producer strains. In this review, we discuss how the success of the metabolic engineering pipeline often relies on retrobiosynthetic protocols able to identify promising production routes and dynamic regulation strategies through automated biodesign algorithms, which are subsequently assembled as embedded integrated genetic circuits in the host strain. Those approaches are orchestrated by an experimental design strategy that provides optimal scheduling planning of the DNA assembly, rapid prototyping and, ultimately, brings forward an accelerated Design-Build-Test-Learn cycle and the overall optimization of the biomanufacturing process. Achieving such a vision will address the increasingly compelling demand in our society for delivering valuable biomolecules in an affordable, inclusive and sustainable bioeconomy, IOM acknowledges funding from the Spanish Ministry of Science, Innovation and Universities and the European Union FEDER under grant SYNBIOCONTROL (DPI2017-82896-C2-2-R). PC acknowledges funding from Universitat Politècnica de València Talento Programme, the Spanish Ministry of Science, Innovation and Universities and the European Union FEDER under grant SYNBIOCONTROL (DPI2017-82896-C2-1-R) and European Union's Horizon 2020 research and innovation programme under grant agreement number 814408 (ShikiFactory100), Peer reviewed