Pasar al contenido principal

MODELADO, SIMULACION Y VALIDACION EXPERIMENTAL DE LA TRANSFERENCIA DE CALOR EN EL ENTORNO DE LA EDIFICACION

ENE2008-00599

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel Wireless Sensor System for Dynamic Characterization of Borehole Heat Exchangers

  • Martos Torres, Julio
  • Torres Pais, Jose
  • Soret Medel, Jesús
  • Martinez, Guillermo
  • García Olcina, Raimundo
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
The design and field test of a novel sensor system based in autonomous wireless sensors to measure the temperature of the heat transfer fluid along a borehole heat exchanger (BHE) is presented. The system, by means of two specials valves, inserts and extracts miniaturized wireless sensors inside the pipes of the borehole, which are carried by the thermal fluid. Each sensor is embedded in a small sphere of just 25 mm diameter and 8 gr weight, containing a transceiver, a microcontroller, a temperature sensor and a power supply. A wireless data processing unit transmits to the sensors the acquisition configuration before the measurements, and also downloads the temperature data measured by the sensor along its way through the BHE U-tube. This sensor system is intended to improve the conventional thermal response test (TRT) and it allows the collection of information about the thermal characteristics of the geological structure of subsurface and its influence in borehole thermal behaviour, which in turn, facilitates the implementation of TRTs in a more cost-effective and reliable way., This work was supported by the Spanish Government under the projects "Modeling and simulation of complex energetic systems" ("Modelado y simulacion de sistemas energeticos complejos", Ramon y Cajal research program 2005) and "Modeling, simulation and experimental validation of heat transfer in building construction environments" ("Modelado, simulacion y validacion experimental de la transferencia de calor en el entorno de la edificacion", ENE2008-00599/CON).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Perturbation analysis of the heat transfer in porous media with small thermal conductivity

  • Villatoro, F. R.
  • González-Santander Martínez, Juan Luis
  • Borovsky, M. A.
  • Ratis, Yu. L.
  • Izzheurov, E. A.
  • Pérez Quiles, María Jezabel
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
An approximate analytical solution for the one-dimensional problem of heat transfer between an inert gas and a porous semi-infinite medium is presented. Perturbation methods based on Laplace transforms have been applied using the solid thermal conductivity as small parameter. The leading order approximation is the solution of Nusselt (or Schumann) problem. Such solution is corrected by means of an outer approximation. The boundary condition at the origin has been taking into account using an inner approximation for a boundary layer. The gas temperature presents a discontinuous front (due to the incompatibility between initial and boundary conditions) which propagates at constant velocity. The solid temperature at the front has been smoothed out using an internal layer asymptotic approximation. The good accuracy of the resulting asymptotic expansion shows its usefulness in several engineering problems such as heat transfer in porous media, in exhausted chemical reactions, mass transfer in packed beds, or in the analysis of capillary electrochromatography techniques. © 2010 Elsevier Inc., The authors thanks the remarks and suggestion of the reviewers which have greatly improved the contents of the paper. This work has been funded by Project ENE2008-00599 from the Spanish Ministry of Science and Innovation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving parameter estimates obtained from thermal response tests: Effect of ambient air temperature variations

  • Bandos, Tetyana
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
[EN] This paper presents a method of subtracting the effect of atmospheric conditions from thermal response test (TRT) estimates by using data on the ambient air temperature. The method assesses effective ground thermal conductivity within 10% of the mean value from the test, depending on the time interval chosen for the analysis, whereas the estimated value can vary by a third if energy losses outside the borehole are neglected. Evaluating the same test data using the finite line-source (FLS) model gives lower values for the ground thermal conductivity than for the infinite line-source (ILS) model, whether or not heat dissipation to ambient air is assumed., This paper has been supported by the European Union Commission under projects GROUND-MED FP7-ENERGY-2007-2-TREN-218895, 043340, and Geotrainet - IEE/07/581; the Spanish Ministry of Education and Science under projects "Modelado y simulacion de sistemas energeticos complejos" (Programa Ramon y Cajal 2005) and ENE2008-00599/CON; by the Government of Valencia under project GV/2008/292; and by PAID-06-09/2734.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MATLAB GUI for computing Bessel functions using continued fractions algorithm, GUI Matlab para o cálculo de funções de Bessel usando frações continuadas

  • Hernandez Vargas, E.
  • Commeford, K.
  • Pérez Quiles, María Jezabel
[EN] Higher order Bessel functions are prevalent in physics and engineering and there exist different methods to evaluate them quickly and efficiently. Two of these methods are Miller's algorithm and the continued fractions algorithm. Miller's algorithm uses arbitrary starting values and normalization constants to evaluate Bessel functions. The continued fractions algorithm directly computes each value, keeping the error as small as possible. Both methods respect the stability of the Bessel function recurrence relations. Here we outline both methods and explain why the continued fractions algorithm is more efficient. The goal of this paper is both (1) to introduce the continued fractions algorithm to physics and engineering students and (2) to present a MATLAB GUI (Graphic User Interface) where this method has been used for computing the Semi-integer Bessel Functions and their zeros., [PT] Funções de Bessel de ordem mais alta são recorrentes em física e nas engenharias, sendo que há diferentes métodos para calculá-las de maneira rápida e eficiente. Dois destes métodos são o algoritmo de Miller e o algoritmo de frações continuadas. O primeiro faz uso de valores iniciais e constantes de normalização arbitrários, enquanto o segundo o faz calculando cada valor diretamente, minimizando tanto quanto possível o erro. Ambos respeitam a estabilidade das relações de recorrência das funções de Bessel. Neste trabalho descrevemos ambos os métodos e explicamos a razão pela qual o algoritmo das frações continuadas é mais eficiente. O objetivo do artigo é (1) introduzir o algoritmo de frações continuadas para estudantes de física e das engenharias e (2) apresentar um GUI (Graphic User Interface) em Matlab no qual este método foi utilizado para calcular funções de Bessel semi-inteiras e seus zeros., The authors wish to thank the financial support received from the Universidad Politécnica de Valencia under grant PAID-06-09-2734, from the Ministerio de Ciencia e Innovación through grant ENE2008-00599 and specially from the Generalitat Valenciana under grant reference 3012/2009.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficiency improvement of a ground coupled heat pump system from energy management

  • Pardo García, Nicolás
  • Martos Torres, Julio
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Sala, Antonio|||0000-0002-5691-8772
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
The installed capacity of an air conditioning system is usually higher than the average cooling or heating demand along the year. So, most of the time, the system is working under its actual capacity. In this contribution, we study the way to improve the efficiency of a ground coupled heat pump air conditioning system by adapting its produced thermal energy to the actual thermal demand. For this purpose, an air conditioning system composed by a ground coupled heat pump and a central fan coil linked to an office located in a cooling dominated area was simulated, and a new management strategy aiming to diminish electrical consumption was developed under the basic constraint that comfort requirements are kept. This strategy takes advantage of the possibility of managing the air flow in the fan, the water mass flows in the internal and external hydraulic systems, and the set point temperature in the heat pump to achieve this objective. The electrical consumption of the system is calculated for the new management strategy and compared with the results obtained for a conventional one, resulting in estimated energy savings around 30%, This work has been supported by the Spanish Government under projects "Modelado y simulacion de sistemas energeticos complejos" (2005 Ramon y Cajal program), "Modelado, simulacion y validacion experimental de la transferencia de calor en el entorno de la edificacion" (ENE2008-0059/CON). A. Sala is grateful to the financial support of grants DPI2008-06731-c02-01 (Spanish Government), and Generalitat Valenciana Prometeo/2008/088.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of thermal conductivity from thermal response test for estimating steady-state temperatures in rock and stratified soil near a line source of heat

  • Bandos, Tetyana
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • Urchueguía Schölzel, Javier Fermín|||0000-0002-3054-3431
This article addresses the influence of anisotropy of the ground on steady-state temperature in the surroundings of vertical borehole and effective thermal conductivity measured by a field thermal response test. This is a key parameter in the design of ground coupled heat pumps to heat and cool buildings. First, this article provides a brief overview of the current technique of estimating thermal conductivity from data obtained in a thermal response test based on predictions for temperature from a line source of heat in an isotropic ground. Then, the analytical solutions to the isotropic model for the ground are used to obtain the solutions to the anisotropic model for stratified medium. In addition, the article provides a new analytical exact solution for temperatures around a finite line source of heat penetrating anisotropic semi-infinite medium, in which the angle between the ground surface and the sedimentary strata is arbitrary. Approximate expressions for the temperature evolution during the test and for the steady-state temperature are presented. Such approximate expressions are also given for integral mean temperature for two special orientations of the strata. The limitations of the finite line source method in stratified medium and recommendations for layout of multiple vertical or horizontal ground coupled heat exchangers or waste canisters in repository rock are discussed. Copyright © 2011 American Society of Heating, Refrigerating and Air-Conditioning Engineers., This paper has been supported by the European Union Commission under project 043340, and Geotrainet-IEE/07/581; the Spanish Ministry of Education and Science under projects "Modelado y simulacion de sistemas energeticos complejos" (Programa Ramon y Cajal 2005) and ENE2008-00599/ CON; by the Government of Valencia under project GV/2008/292; and by PAID-06-09/2734.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermal response test analysis for U-pipe vertical borehole heat exchangers under groundwater flow conditions

  • Magraner, Teresa|||0000-0001-5292-1432
  • Montero Reguera, Álvaro Enrique|||0000-0002-4165-4743
  • Cazorla-Marín, Antonio|||0000-0003-3314-0395
  • Montagud- Montalvá, Carla|||0000-0002-7118-6119
  • Martos, Julio
[EN] Conventional models used in the analysis of thermal response test data only consider conduction as heat transfer mechanism. In cases where presence of groundwater is detected, convection heat transmission plays an important role, so its influence must be determined in the calculation of the effective thermal conductivity, usually overestimated in these situations, increasing its value the higher the power injected and the time elapsed. In this work, based on the data collected in a borehole located at UPV (Valencia) in which have been carried out three thermal response tests with different characteristics, has been implemented a variation of the finite line source model introducing an expression for the effective thermal conductivity formed by two terms, one static unaffected by underground flow and another dynamic that depends on time. Analyzing the data in the model developed and in the finite line source and infinite line source models, the results show that the new model estimates accurately the conductivity value unaffected by underground flow regardless the power injected or the time elapsed in the test, with differences between the results obtained in the analysed tests and average thermal conductivity of 1,4%, compared to the conventional models in which this difference is 27%., This work has been supported by the Spanish Government under project "Modelado, simulacion y validacion experimental de la transferencia de calor en el entorno de la edificacion" (ENE200800599/CON)