Pasar al contenido principal

3D-PANTHER: DESARROLLO DE UN SIMULADOR 3D AVANZADO NEUTRONICO-TERMOHIDRAULICO DE PLANTA

ENE2008-02669

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2008
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Updating the Lambda modes of a nuclear power reactor

  • González Pintor, Sebastián
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] Starting from a steady state configuration of a nuclear power reactor some situations arise in which the reactor configuration is perturbed. The Lambda modes are eigenfunctions associated with a given configuration of the reactor, which have successfully been used to describe unstable events in BWRs. To compute several eigenvalues and its corresponding eigenfunctions for a nuclear reactor is quite expensive from the computational point of view. Krylov subspace methods are efficient methods to compute the dominant Lambda modes associated with a given configuration of the reactor, but if the Lambda modes have to be computed for different perturbed configurations of the reactor more efficient methods can be used. In this paper, different methods for the updating Lambda modes problem will be proposed and compared by computing the dominant Lambda modes of different configurations associated with a Boron injection transient in a typical BWR reactor. (C) 2010 Elsevier Ltd. All rights reserved., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under projects ENE2008-02669 and MTM2007-64477-AR07, the Generalitat Valenciana under project ACOMP/2009/058, and the Universidad Politecnica de Valencia under project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modified Block Newton method for the lambda modes problem

  • González Pintor, Sebastián
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[EN] To study the behaviour of nuclear power reactors it is necessary to solve the time dependent neutron diffusion equation using either a rectangular mesh for PWR and BWR reactors or a hexagonal mesh for VVER reactors. This problem can be solved by means of a modal method, which uses a set of dominant modes to expand the neutron flux. For the transient calculations using the modal method with a moderate number of modes, these modes must be updated each time step to maintain the accuracy of the solution. The updating modes process is also interesting to study perturbed configurations of a reactor. A Modified Block Newton method is studied to update the modes. The performance of the Newton method has been tested for a steady state perturbation analysis of two 2D hexagonal reactors, a perturbed configuration of the IAEA PWR 3D reactor and two configurations associated with a boron dilution transient in a BWR reactor., This work has been partially supported by the Spanish Ministerio de Educación y Ciencia under projects ENE2008-02669 and MTM2007-64477-AR07, the Generalitat Valenciana under project ACOMP/2009/058, and the Universidad Politécnica de Valencia under project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using proper generalized decomposition to compute the dominant mode of a nuclear reactor

  • González Pintor, Sebastián
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
Proper generalized decomposition is a recently developed technique that solves some multidimensional problems using auxiliar models in a lower dimensional space. A method based on this technique together with the Newton method for the computation of eigenvalues is proposed to obtain the dominant eigenvalue of a nuclear power reactor core and its corresponding eigenvector. The method is tested using the bidimensional reactor Biblis., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under projects ENE2008-02669 and MTM2007-64477-AR07, the Generalitat Valenciana under project ACOMP/2009/058, and the Universidad Politecnica de Valencia under project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

REA 3D-dynamic analysis in Almaraz NPP with RELAP5/PARCS v2.7 and SIMTAB cross-sections tables

  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Garcia-Fenoll, Marina
  • Ánchel Añó, Francisco Constantino
  • Pereira, C.
  • da Silva, C
  • Ortego, A.
  • Martínez-Murillo, J.C
[EN] The Rod Ejection Accident (REA) belongs to the Reactivity-Initiated Accidents (RIA) category of accidents and it is part of the licensing basis accident analyses required for pressurized water reactors (PWR). The REA at Hot Zero Power (HZP) is characterized by a single rod ejection from a core position with a very low power level. The evolution consists basically of a continuous reactivity insertion. The main feature limiting the consequences of the accident in a PWR is the Doppler Effect. To check the performance of the coupled code RELAP5/PARCS v2.7 a REA in Almaraz NPP is simulated. These analyses will allow knowing more accurately the PWR real plant phenomenology in the RIA most limiting conditions., This work has been partially supported by the Spanish Ministerio de Educación y Ciencia under project PHB2007-0067-PC and by the Brazilian Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) under project CAPES/DGU 159/08. This work has also been partially supported by the Spanish Ministerio de Educación y Ciencia under project ENE2008-02669, the Generalitat Valenciana under project ACOMP/2009/058, and the Universitat Politècnica de València under project PAID-05-09-4285. The authors wish to acknowledge the technical and financial support of the Almaraz-Trillo AIE for this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modal processing of the Local Power Range Monitors signals in BWR NPP

  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
  • Barrachina, Teresa|||0000-0001-8794-4204
In a boiling water reactor (BWR), the power distribution can be varied both axially and radially by control rod manipulation and by void content variations in the moderator. As an example of accidental situations in nuclear power plants (NPP), we consider the power oscillations that can occur in a BWR NPP under certain circumstances. An interesting problem is to study and characterize these instabilities analyzing the neutronic power signals obtained from the Local Power Range Monitors (LPRMs) installed in the reactor core. Several techniques exist to detect and classify the possible oscillations in a BWR. The power modal decomposition method and the signal component analysis methodologies are reviewed. The performance of these techniques is compared analyzing Records 9 and 10 of cycle 14 of the OECD Ringhals 1 Stability Benchmark. © 2011 Elsevier Ltd. All rights reserved., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under projects ENE2008-02669, the Generalitat Valenciana under Project ACOMP/2009/058, and the Universidad Politecnica de Valencia under project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uncertainty and sensitivity of neutron kinetic parameters in the dynamic response of a PWR rod ejection accident coupled simulation

  • Mesado Melia, Carles
  • Soler Martínez, María Desamparados
  • García-Díaz, J. Carlos
  • Macián-Juan, R
  • Barrachina, Teresa|||0000-0001-8794-4204
  • Miró Herrero, Rafael|||0000-0003-1012-0869
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
In nuclear safety analysis, it is very important to be able to simulate the different transients that can occur in a nuclear power plant with a very high accuracy. Although the best estimate codes can simulate the transients and provide realistic system responses, the use of nonexactmodels, together with assumptions and estimations, is a source of uncertainties whichmust be properly evaluated. This paper describes a Rod Ejection Accident (REA) simulated using the coupled code RELAP5/PARCSv2.7 with a perturbation on the cross-sectional sets in order to determine the uncertainties in the macroscopic neutronic information. The procedure to performthe uncertainty and sensitivity (U&S) analysis is a sampling-based method which is easy to implement and allows different procedures for the sensitivity analyses despite its high computational time. DAKOTA-Jaguar software package is the selected toolkit for the U&S analysis presented in this paper. The size of the sampling is determined by applying the Wilks¿ formula for double tolerance limits with a 95% of uncertainty and with 95% of statistical confidence for the output variables. Each sample has a corresponding set of perturbations that will modify the cross-sectional sets used by PARCS. Finally, the intervals of tolerance of the output variables will be obtained by the use of nonparametric statistical methods., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under Project ENE2008-02669, the Generalitat Valenciana under Project ACOMP/2009/058, and the Universitat Politecnica de Valencia under Project PAID-05-09-4285.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Application of a nodal collocation approximation for the multidimensional P-L equations to the 3D Takeda benchmark problems

  • Capilla Romá, Maria Teresa|||0000-0002-8764-5754
  • Talavera Usano, César Félix|||0000-0002-8542-9097
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
PL equations are classical approximations to the neutron transport equations, which are obtained expanding the angular neutron flux in terms of spherical harmonics. These approximations are useful to study the behavior of reactor cores with complex fuel assemblies, for the homogenization of nuclear cross-sections, etc., and most of these applications are in three-dimensional (3D) geometries. In this work, we review the multi-dimensional PL equations and describe a nodal collocation method for the spatial discretization of these equations for arbitrary odd order L, which is based on the expansion of the spatial dependence of the fields in terms of orthonormal Legendre polynomials. The performance of the nodal collocation method is studied by means of obtaining the keff and the stationary power distribution of several 3D benchmark problems. The solutions are obtained are compared with a finite element method and a Monte Carlo method., This work has been partially supported by the Spanish Ministerio de Educacion y Ciencia under Project ENE2008-02669, the Generalitat Valenciana under Project ACOMP/2009/058, and the Universidad Politecnica de Valencia under Project PAID-05-09-4285.