Pasar al contenido principal

COMBUSTION DE LIQUIDOS Y BIOMASA CON CAPTURA DE CO2 MEDIANTE TRANSPORTADORES SOLIDOS DE OXIGENO

ENE2011-26354

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Combustion and Reforming of Liquid Fossil Fuels through Chemical Looping Processes: Integration of Chemical Looping Processes in a Refinery

  • García-Labiano, F.
  • De Diego, L.F.
  • García-Díez, E.
  • Serrano, A.
  • Abad, A.
  • Gayán, P.
  • Adánez, J.
Oil refining processes demand and use vast quantities of energy and thus are responsible for the emission of a great deal of CO2. In addition, hydrogen is used in oil refineries for hydrodesulfurization and hydrocraking processes. In this sense, the integration of Chemical Looping technology in an oil refinery using vacuum residues as fuel could drive to significant reductions in CO2 emissions. In this work, Chemical Looping Combustion (CLC) and Chemical Looping Reforming (CLR) experiments have been carried out in a continuously operated 1 kWth unit using a Cu- and Ni-based oxygen carrier, respectively. Diesel, synthetic and mineral lubricant oil were used as fuels as a previous step to the use of low grade residues. Regarding Chemical Looping Combustion conditions, almost 100% of combustion efficiency and full carbon capture were obtained at low oxygen carrier-to-fuel molar ratios (ø=1.6). Regarding Chemical Looping Reforming conditions, a syngas containing a H2 concentration over 50 vol.% in dry basis was obtained with the additional advantage of reaching 100% CO2 capture efficiency in the process. In all cases, syngas composition obtained was close to the given by the thermodynamic equilibrium. These results provide a basis for concluding that the integration of Chemical Looping processes for heat/steam and hydrogen production in an oil refinery is feasible and could lead to significant environmental advantages.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Autothermal chemical looping reforming process of different fossil liquid fuels

  • García-Díez, E.
  • García-Labiano, F.
  • de Diego, L.F.
  • Abad, A.
  • Gayán, P.
  • Adánez, J.
The autothermal Chemical-Looping Reforming (a-CLR) is a process where syngas is produced with two main advantages; there are captured CO2 emissions and the heat required for the syngas production is generated by the process itself. A Ni-based material is used as oxygen carrier circulating between two fluidized bed reactors: the fuel and air reactors. In this work, the auto-thermal conditions in a global H2 production process, integrated by the a-CLR process and a Water Gas Shift reactor, using different liquid fossil fuels were theoretically determined. The hydrogen production per mol of carbon in the fuel was similar for all fossil fuels, taking a value of 2.2 at the optimal operating temperature (700 °C). In addition, the possibility of working at low temperature for a maximum H2 production was experimentally demonstrated in a continuous 1 kWth a-CLR unit.