Pasar al contenido principal

IRRADIACION, CARACTERIZACION Y MODELADO DE NUEVOS MATERIALES PARA FUSION INERCIAL Y MAGNETICA

ENE2015-70300-C3-3-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Permanent modifications in silica produced by ion-induced high electronic excitation: experiments and atomistic simulations

  • Rivera, Antonio
  • Olivares, José
  • Prada, Alejandro
  • Crespillo, Miguel L.
  • Caturla, Maria J.
  • Bringa, Eduardo M.
  • Perlado, José M.
  • Peña-Rodríguez, Ovidio
  • Caturla, Maria J.|||/items/885d8f6b-b087-40fc-b47a-fd3e84c115b1
The irradiation of silica with ions of specific energy larger than ~0.1 MeV/u produces very high electronic excitations that induce permanent changes in the physical, chemical and structural properties and give rise to defects (colour centres), responsible for the loss of sample transparency at specific bands. This type of irradiation leads to the generation of nanometer-sized tracks around the ion trajectory. In situ optical reflection measurements during systematic irradiation of silica samples allowed us to monitor the irradiation-induced compaction, whereas ex situ optical absorption measurements provide information on colour centre generation. In order to analyse the results, we have developed and validated an atomistic model able to quantitatively explain the experimental results. Thus, we are able to provide a consistent explanation for the size of the nanotracks, the velocity and thresholding effects for track formation, as well as, the colour centre yield per ion and the colour centre saturation density. In this work we will discuss the different processes involved in the permanent modification of silica: collective atomic motion, bond breaking, pressure-driven atom rearrangement and ultra-fast cooling. Despite the sudden lattice energy rise is the triggering and dominant step, all these processes are important for the final atomic configuration.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Permanent modifications in silica produced by ion-induced high electronic excitation: Experiments and atomistic simulations

  • Rivera, Antonio
  • Olivares Villegas, José
  • Prada, A.
  • Crespillo, M.L.
  • Caturla, M. J.
  • Bringa, E. M.
  • Perlado, J.M.
  • Peña-Rodríguez, O.
14 pags., 7 figs., 2 tabs.-- Open Access funded by Creative Commons Atribution Licence 4.0, The irradiation of silica with ions of specific energy larger than ~0.1 MeV/u produces very high electronic excitations that induce permanent changes in the physical, chemical and structural properties and give rise to defects (colour centres), responsible for the loss of sample transparency at specific bands. This type of irradiation leads to the generation of nanometer-sized tracks around the ion trajectory. In situ optical reflection measurements during systematic irradiation of silica samples allowed us to monitor the irradiation-induced compaction, whereas ex situ optical absorption measurements provide information on colour centre generation. In order to analyse the results, we have developed and validated an atomistic model able to quantitatively explain the experimental results. Thus, we are able to provide a consistent explanation for the size of the nanotracks, the velocity and thresholding effects for track formation, as well as, the colour centre yield per ion and the colour centre saturation density. In this work we will discuss the different processes involved in the permanent modification of silica: collective atomic motion, bond breaking, pressure-driven atom rearrangement and ultra-fast cooling. Despite the sudden lattice energy rise is the triggering and dominant step, all these processes are important for the final atomic configuration., The authors acknowledge the computer resources and technical assistance provided by CESVIMA (UPM), funding by Spanish MINECO through project ENE2015-70300-C3-3-R, funding by EUROfusion Consortium through project AWP15-ENR-01/CEA-02 and funding by Madrid Region (CAM) through project Technofusion (II)-CM (S2013/MAE-2745). E.M.B. thanks support from PICT-2014-0696 (ANPCyT), and SeCTyP-UNCuyo grant 2016-0003., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the ion-induced elongation of silver nanoparticles embedded in silica

  • Peña-Rodríguez, O.
  • Prada, A.
  • Olivares Villegas, José
  • Oliver, Alicia
  • Rodríguez-Fernández, L.
  • Silva-Pereyra, H. G.
  • Bringa, Eduardo
  • Perlado, J.M.
  • Rivera, Antonio
9 pags., 6 figs., In this work we have studied the elongation of silver nanoparticles irradiated with 40 MeV Bromine ions by means of in situ optical measurements, transmission electron microscopy and molecular dynamics simulations. The localized surface plasmon resonance of silver nanoparticles has a strong dependence on the particle shape and size, which allowed us to obtain the geometrical parameters with remarkable accuracy by means of a fit of the optical spectra. Optical results have been compared with transmission electron microscopy images and molecular dynamics simulations and the agreement is excellent in both cases. An important advantage of in situ measurements is that they yield an extremely detailed information of the full elongation kinetics. Final nanoparticle elongation depends on a complex competition between single-ion deformation, Ostwald ripening and dissolution. Building and validating theoretical models with the data reported in this work should be easier than with the information previously available, due to the unprecedented level of kinetic details obtained from the in situ measurements., The authors acknowledge the computer resources and technical assistance provided by CESVIMA, funding by Spanish MINECO through projects ENE2015-70300-C3-3-R, ENE-2012-39787-C06-03 and MAT-2012- 38541, project AWP15-ENR-01/CEA-02 of EUROfusion Consortium and Technofusion project (II)-CM (S2013/MAE-2745). This work was also partially supported by the DGAPA-UNAM project IN-108217 and the CONACyT (Mexico) grant No. 222485. O.P.R. is grateful with Moncloa Campus of International Excellence (UCM-UPM) for the PICATA postdoctoral fellowship. E.M.B. thanks support from PICT-2014-0696 (ANPCyT), and a SeCTyP-UNCuyo grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adhesion enhancement of DLC hard coatings by HiPIMS metal ion etching pretreatment

  • Santiago, José Antonio
  • Fernández-Martínez, Iván
  • Wennberg, A.
  • Molina-Aldareguia, Jon
  • Castillo-Rodríguez, Miguel
  • Rojas, T. Cristina
  • Sánchez-López, J.C.
  • González Sagardoy, María Ujué
  • García-Martín, José Miguel
  • Li, H.
  • Bellido-González, Victor
  • Monclús, M.A.
  • González-Arrabal, Raquel
Poor adhesion is a recurrent problem for the wider use of diamond-like carbon (DLC) coatings in industrial applications. In this work, we investigate the effectiveness of high-power impulse magnetron sputtering (HiPIMS) metal ion etching to improve the adhesion of DLC coatings on high speed steel substrates. The influence of HiPIMS pretreatment parameters, the metal ion selection for the process and the addition of bonding layers on the adhesion properties were studied. Daimler-Benz and nanoscratch test methods were used to evaluate the adhesion. The elemental composition, morphology and microstructure of the samples were evaluated by EELS, SEM, AFM and HRTEM. In general, samples pretreated with HiPIMS metal ion etching withstand larger critical loads than those pretreated by conventional Ar+ glow discharge and bonding layers. The pretreatment is proven to be very effective at removing surface contaminants and providing a gradual interface. The selection of Cr over Ti contributes to a significant improvement on the adhesion due to the reduction of the oxygen level at the interface thus ensuring an optimal coating-substrate contact and a more compliant structure, which prevents the delamination failure., The research leading to these results has received funding from Madrid region under programme S2013/MIT-2775, DIMMAT project. Financial support from MINECO under projects (RADIAFUS IV ENE2015-70300-C3-3-R, MAT2014-59772-C2-1-P, MAT2015-69035-REDC FUNCOAT+), Leverhulme International Network Grant (CARBTRIB) and EUROfusion Consortium under project AWP15-ENR-01/CEA-02 are also acknowledged, as well as the service from the X-SEM Laboratory at IMN under project CSIC13-4E-1794 with support from EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the large near-field enhancement on nanocolumnar gold substrates

  • Díaz-Núñez, Pablo
  • García-Martín, José Miguel
  • González Sagardoy, María Ujué
  • González-Arrabal, Raquel
  • Rivera, A.
  • Alonso-González, Pablo
  • Martín-Sánchez, Javier
  • Taboada-Gutiérrez, Javier
  • González-Rubio, Guillermo
  • Guerrero-Martínez, Andrés
  • Bañares, Luis
  • Peña Rodríguez, Ovidio
One of the most important and distinctive features of plasmonic nanostructures is their ability to confine large electromagnetic fields on nanometric volumes; i.e., the so-called hot spots. The generation, control and characterization of the hot spots are fundamental for several applications, like surface-enhanced spectroscopies. In this work, we characterize the near-field distribution and enhancement of nanostructured gold thin films fabricated by glancing angle deposition magnetron sputtering. These films are composed of columnar nanostructures with high roughness and high density of inter-columnar gaps, where the electromagnetic radiation can be confined, generating hot spots. As expected, the hot spots are localized in the gaps between adjacent nanocolumns and we use scattering-type scanning near-field optical microscopy to image their distribution over the surface of the samples. The experimental results are compared with finite-difference time-domain simulations, finding an excellent agreement between them. The spectral dependence of the field-enhancement is also studied with the simulations, together with surface-enhanced Raman spectroscopy at different excitation wavelengths in the visible-NIR range, proving a broad-band response of the substrates. These findings may result in interesting applications in the field of surface-enhanced optical spectroscopies or sensing., P.D.N. acknowledges DIMMAT project funded by Madrid region under programme S2013/MIT-2775, the technical assistance provided by Dr. Judith Langer and CIC biomaGUNE for an internship to perform the SERS measurements. Funding from Universidad Politécnica de Madrid (VJIDOCUPM18OYPR) and MINECO (MAT2014-59772-C2-1-P and ENE2015-70300-C3-3-R) is also acknowledged, as well as the computer resources and technical assistance provided by CESVIMA (Centro de Supercomputación y Visualización de Madrid, Universidad Politécnica de Madrid) and the service from the MiNa Laboratory at IMN funded by CM (S2013/ICE2822), MINECO (CSIC13-4E-1794), the EU (FEDER, FSE) and funding by EUROfusion Consortium through project AWP15-ENR-01/CEA-02., Peer reviewed