Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An improved data integration algorithm to constrain the 3D displacement field induced by fast deformation phenomena tested on the Napa Valley earthquake

  • Polcari, Marco
  • Fernández Torres, José
  • Albano, Matteo
  • Bignami, Christian
  • Palano, Mimmo
  • Stramondo, Salvatore
In this work, we propose an improved algorithm to constrain the 3D ground displacement field induced by fast surface deformations due to earthquakes or landslides. Based on the integration of different data, we estimate the three displacement components by solving a function minimization problem from the Bayes theory. We exploit the outcomes from SAR Interferometry (InSAR), Global Positioning System (GNSS) and Multiple Aperture Interferometry (MAI) to retrieve the 3D surface displacement field. Any other source of information can be added to the processing chain in a simple way, being the algorithm computationally efficient. Furthermore, we use the intensity Pixel Offset Tracking (POT) to locate the discontinuity produced on the surface by a sudden deformation phenomenon and then improve the GNSS data interpolation. This approach allows to be independent from other information such as in-situ investigations, tectonic studies or knowledge of the data covariance matrix. We applied such a method to investigate the ground deformation field related to the 2014 Mw 6.0 Napa Valley earthquake, occurred few kilometers from the San Andreas fault system., This work has been supported by the project FIRB RBAP10ZC8K_002. Research by JF has been supported by the Spanish Ministry of Economy and Competitiveness research project ESP2013-47780-557 C2-1-R and the EU 7th FP MED-SUV project (contract 308665). It is a contribution to the Moncloa Campus of International Excellence., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Volcano Geodesy: Recent developments and future challenges

  • Fernández Torres, José
  • Pepe, Alessandra
  • Poland, Michael P.
  • Sigmundsson, Freysteinn
Ascent of magma through Earth's crust is normally associated with, among other effects, ground deformation and gravity changes. Geodesy is thus a valuable tool for monitoring and hazards assessment during volcanic unrest, and it provides valuable data for exploring the geometry and volume of magma plumbing systems. Recent decades have seen an explosion in the quality and quantity of volcano geodetic data. New datasets (some made possible by regional and global scientific initiatives), as well as new analysis methods and modeling practices, have resulted in important changes to our understanding of the geodetic characteristics of active volcanism and magmatic processes, from the scale of individual eruptive vents to global compilations of volcano deformation. Here, we describe some of the recent developments in volcano geodesy, both in terms of data and interpretive tools, and discuss the role of international initiatives in meeting future challenges for the field., Research by JF has been supported by the Spanish Ministry of Economy and Competitiveness research project ESP2013-47780-557 C2-1-R and the EU 7th FP MED-SUV project (contract 308665), and is a contribution to the Moncloa Campus of International Excellence., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Moho depth determination beneath the Zagros Mountains from 3D inversion of gravity data

  • Ashena, Zahra B.
  • Ardestani, Vahid E.
  • Camacho, Antonio G.
  • Dehghani, Ali
  • Fernández Torres, José
Due to its geological and economic importance, the Zagros Mountains have been investigated by many researchers during the last decades. Nevertheless, in spite of all the studies conducted on the region, there are still some controversial problems concerning the structure of the Zagros Mountains, including crustal depths, demanding more insights into understanding the crustal constraints of the region. Accordingly, we have conducted a gravity study to determine Moho depth map of the Zagros Mountains region, including its major structural domains from the coastal plain of the Persian Gulf to central Iran. The employed data are the densest and most accurate terrestrial gravity data set observed until now with the precision of 5 μGal and resolution of 5 arc-minute by 5 arc-minute. To image Moho depth variations, gravity inversion software GROWTH2.0 is used, proposing the possibility to model stratified structures by means of a semi-objective exploratory 3D inversion approach. The obtained results reveal the crustal thickness of ~ 30–35 km underneath the southwestern most Zagros Fold-Thrust Belt increasing northeastward to 48 km. The maximum Moho depth is estimated ~ 62 km below the Zagros Mountains belt along the Main Zagros Thrust. Northeast of the study area, an average crustal thickness of 46 km is computed beneath Urumieh–Dokhtar magmatic arc and central Iran., The University of Tehran is acknowledged for the financial support of the first author’s sabbatical leave at AE Consejo Superior de Investigaciones Científicas, CSIC, during the period from March 2016 to August 2016. Research by JF and AGC has been supported by the Spanish Ministry of Economy and Competitiveness research project ESP2013-47780-557 C2-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PAF: A software tool to estimate free-geometry extended bodies of anomalous pressure from surface deformation data

  • Camacho, Antonio G.
  • Fernández Torres, José
  • Cannavó, Flavio
We present a software package to carry out inversions of surface deformation data (any combination of InSAR, GPS, and terrestrial data, e.g., EDM, levelling) as produced by 3D free-geometry extended bodies with anomalous pressure changes. The anomalous structures are described as an aggregation of elementary cells (whose effects are estimated as coming from point sources) in an elastic half space. The linear inverse problem (considering some simple regularization conditions) is solved by means of an exploratory approach. This software represents the open implementation of a previously published methodology (Camacho et al., 2011). It can be freely used with large data sets (e.g. InSAR data sets) or with data coming from small control networks (e.g. GPS monitoring data), mainly in volcanic areas, to estimate the expected pressure bodies representing magmatic intrusions. Here, the software is applied to some real test cases., This research has been supported by the Spanish Ministry of Economy and Competitiveness grant ESP2013-47780-557-C2-1-R and the EU 7th FP MED-SUV project (contract 308665)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Site scale modeling of slow-moving landslides, a 3D viscoplastic finite element modeling approach

  • Bru, Guadalupe
  • Fernández Merodo, José Antonio
  • García López-Davalillo, Juan Carlos
  • Herrera García, Gerardo
  • Fernández Torres, José
This paper presents an advanced 3D numerical methodology to reproduce the kinematics of slow active landslides, more precisely, to reproduce the nearly constant strain rate (secondary creep) and the acceleration/deceleration of the moving mass due to hydrological changes. For this purpose, finite element analyses are performed in a large area covering a long time-span (12 years), in order to exhibit different interacting slope movements. First, we perform a stability analysis using the shear strength reduction (SSR) technique with a Mohr-Coulomb failure criteria. It is done in order to compute factors of safety (FS) and to identify two different scenarios, the first one being stable (FS > 1) and the second one being unstable (FS < 1). In the studied test case, the Portalet landslide (Central Spanish Pyrenees), the first scenario corresponds to an initial stable configuration of the slope and the second one to an unstable excavated configuration. Second, taking the first scenario as an initial condition, a time-dependent analysis is performed using a coupled formulation to model solid skeleton and pore fluids interaction, and a simplified ground water model that takes into account daily rainfall intensity. In this case, a viscoplastic constitutive model based on Perzyna’s theory is applied to reproduce soil viscous behavior and the delayed creep deformation due to the excavation. The fluidity parameter is calibrated to reproduce displacements measured by the monitoring systems. Our results demonstrate that 3D analyses are preferable to 2D ones for reproducing in a more realistic way the slide behavior. After calibration, the proposed model is able to simulate successfully short- and medium-term predictions during stages of primary and secondary creep., This research has been supported by the Spanish Ministry of Economy and Competitiveness grants ESP2013-47780-557 C2-1-R and ESP2013-47780-557 C2-2-R. It is a contribution to the Moncloa Campus of International Excellence., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling the two- and three-dimensional displacement field in Lorca, Spain, subsidence and the global implications

  • Fernández Torres, José
  • Prieto, Juan Francisco
  • Escayo, Joaquin
  • Camacho, Antonio G.
  • Luzón, Francisco
  • Tiampo, Kristy F.
  • Palano, Mimmo
  • Abajo, Tamara
  • Pérez, Enrique
  • Velasco, Jesus
  • Herrero, Tomas
  • Bru, Guadalupe
  • Molina, Iñigo
  • López, Juan
  • Rodríguez Velasco, Gema
  • Gómez, Israel
  • Mallorquí Franquet, Jordi Joan
Land subsidence associated with overexploitation of aquifers is a hazard that commonly affects large areas worldwide. The Lorca area, located in southeast Spain, has undergone one of the highest subsidence rates in Europe as a direct consequence of long-term aquifer exploitation. Previous studies carried out on the region assumed that the ground deformation retrieved from satellite radar interferometry corresponds only to vertical displacement. Here we report, for the first time, the two- and three-dimensional displacement field over the study area using synthetic aperture radar (SAR) data from Sentinel-1A images and Global Navigation Satellite System (GNSS) observations. By modeling this displacement, we provide new insights on the spatial and temporal evolution of the subsidence processes and on the main governing mechanisms. Additionally, we also demonstrate the importance of knowing both the vertical and horizontal components of the displacement to properly characterize similar hazards. Based on these results, we propose some general guidelines for the sustainable management and monitoring of land subsidence related to anthropogenic activities. Introduction, The research has been supported by the Spanish Ministry of Economy and Competitiveness research projects ESP2013-47780-557 C2-1-R and TEC2017-85244-C2-2-P. It is a contribution to the Moncloa Campus of International Excellence., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D multi-source model of elastic volcanic ground deformation

  • Camacho, Antonio G.
  • Fernández Torres, José
Developments in Interferometric Synthetic Aperture Radar (InSAR) and GNSS (Global Navigation Satellite System) during the past decades have promoted significant advances in geosciences, providing high-resolution ground deformation data with dense spatio-temporal coverage. This large dataset can be exploited to produce accurate assessments of the primary processes occurring in geologically active areas. We present a new, original methodology to carry out a multi-source inversion of ground deformation data to better understand the subsurface causative processes. A nonlinear approach permits the determination of location, size and three-dimensional configuration, without any a priori assumption as to the number, nature or shape of the potential sources. The proposed method identifies a combination of pressure bodies and different types of dislocation sources (dip-slip, strike-slip and tensile) that represent magmatic sources and other processes such as earthquakes, landslides or groundwater-induced subsidence through the aggregation of elemental cells. This approach has the following features: (1) simultaneous inversion of the deformation components and/or line-of-sight (LOS) data; (2) simultaneous determination of diverse structures such as pressure bodies or dislocation sources, representing local and regional effects; (3) a fully 3D context; and (4) no initial hypothesis about the number, geometry or types of the causative sources is necessary. This methodology is applied to Mt. Etna (Southern Italy). We analyze the ground deformation field derived from a large InSAR dataset acquired during the January 2009 – June 2013 time period. The application of the inversion approach models several interesting buried structures as well as processes related to the volcano magmatic plumbing system, local subsidence within the Valle del Bove and seaward motion of eastern flank of the volcano., This research has been primarily supported by the Spanish Ministerio de Ciencia, Innovación and Universidades research project DEEP-MAPS (RTI2018-093874-B-I00) and partially by the Spanish Ministry of Economy and Competitiveness research projects AQUARISK (ESP2013-47780-557-C2-1-R) and Thematic Network EPOS Spain (CGL2016-81965-REDT), and the EU 7th Framework Programme EPOS IP (676564-EPOS IP). Research by KFT is funded by CIRES, University of Colorado Boulder. We thank M. Polcari and J. Escayo for providing the 3D coseismic deformation data for the 2014 Napa Valley earthquake. This is a contribution to the Moncloa Campus of International Excellence and part of the CSIC-PTIs TELEDETEC and POLARCSIC activities.