Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Kinetic and chemorheological modelling of the polymerization of 2,4- Toluenediisocyanate and ferrocene-functionalized hydroxyl-terminated polybutadiene

  • Lucio, B.
  • de la fuente, Jose Luis
The reaction of 2,4-toluenediisocyanate (2,4-TDI) and a metallocenic-prepolymer derived from hydroxyl-terminated polybutadiene (HTPB) was studied in bulk and under isothermal conditions (50–80 °C) by rheological methods. Two regions distinguished and limited by the gel point, identified as the crossover of loss tangent (tan δ) at different frequencies, were analysed from different rheological properties during the curing process of this novel metallo-polyurethane (PU). The initial part of this polymerization, dominated by the viscous behaviour (from η0 ≈ 5 Pa s to η = 250 Pa s), was modelled through the Arrhenius isothermal model, in which the presence of two rheokinetic stages, due to different isocyanate groups in the 2 and 4 positions for this asymmetric monomer, was found until the gelation is reached. The contributions of the main reactions for the region analysed, before the gel point of this polyaddition, are discussed. The gel transition was identified, and the viscoelastic behaviour of the gelation process was studied in depth. In addition, from the evolution of the storage modulus (G′) recorded, the overall polymerization reaction was described by a Kamal-Sourour kinetic expression for the reaction rate. The different kinetic parameters obtained for the autocatalytic model used yielded predictions that agree very well with the experimental data, finding a significant autocatalytic effect. An isoconversional method allowed the determination of the dependence of the activation energy on the conversion degree during the network formation of this advanced functional ferrocene-PU, which is of great interest in rocket technology research for the development of the aerospace industry., The authors are grateful to INTA for the financial support through the FPI fellowship programme (2011-2015) and to the Spanish MINECO from the project ESP2014-51989-P., Peerreview
DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Modelling the kinetics and structural property evolution of a versatile reaction: aqueous HCN polymerization

  • Fernández, Amparo
  • Ruiz-Bermejo, Marta
  • de la fuente, Jose Luis
This article contains 14 page(s), The kinetics of the reaction of the synthesis of HCN polymers in aqueous medium at high temperatures have been analysed to ascertain a suitable model for this material, for which it was recently demonstrated that prebiotic chemistry may now be adapted in the development of a new generation of high performance coatings and adhesives with biomedical applications. These experimental conditions were chosen for the simplicity of the reagents, being particularly convenient in regard to potential industrial scale-up of coating technology, where these polymers have revealed an interesting field of application. The kinetics of the precipitation polymerization of HCN in water were studied under isothermal conditions at four different temperatures between 75 °C and 90 °C throughout gravimetric measurements. The use of the Kamal–Sourour autocatalytic kinetic model was proposed, properly describing the overall formation process of this insoluble HCN polymer. All of the kinetic parameters, including reaction orders, kinetic constants and activation energy, were determined for the cross-linking polymerization reaction under study, and a relevant autocatalysis effect was observed. An isoconversion method was also used to analyse the variation of the global activation energy with conversion; and characterization by means of elemental analysis, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) was carried out. This study demonstrates the autocatalytic, robust and straightforward character of this heterogeneous aqueous HCN polymerization, and to the best of our knowledge, this report describes the first time that a systematic and extended kinetic analysis has been conducted to obtain a more comprehensive and deeper understanding of this complex reaction, which is of great interest to the origin of life and, currently, to materials science., "Financial support through the project ESP2014-51989-P of the Spanish MINECO.", Peerreview
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detecting Nonvolatile Life- and Nonlife-Derived Organics in a Carbonaceous Chondrite Analogue with a New Multiplex Immunoassay and Its Relevance for Planetary Exploration

  • Moreno-Paz, Mercedes
  • Gómez-Cifuentes, Ana
  • Ruiz-Bermejo, Marta
  • Hofstetter, Oliver
  • Manchado, Juan M.
  • Sephton, Mark A.
  • Niessner, Reinhard
  • Knopp, Dietmar
  • Parro, Victor
  • Maquieira, Angel|||0000-0003-4641-4957
  • Morais, Sergi|||0000-0002-3722-2358
[EN] Potential martian molecular targets include those supplied by meteoritic carbonaceous chondrites such as amino acids and polycyclic aromatic hydrocarbons and true biomarkers stemming from any hypothetical martian biota (organic architectures that can be directly related to once living organisms). Heat extraction and pyrolysis-based methods currently used in planetary exploration are highly aggressive and very often modify the target molecules making their identification a cumbersome task. We have developed and validated a mild, nondestructive, multiplex inhibitory microarray immunoassay and demonstrated its implementation in the SOLID (Signs of Life Detector) instrument for simultaneous detection of several nonvolatile life- and nonlife-derived organic molecules relevant in planetary exploration and environmental monitoring. By utilizing a set of highly specific antibodies that recognize D- or L- aromatic amino acids (Phe, Tyr, Trp), benzo[a]pyrene (B[a]P), pentachlorophenol, and sulfone-containing aromatic compounds, respectively, the assay was validated in the SOLID instrument for the analysis of carbon-rich samples used as analogues of the organic material in carbonaceous chondrites or even Mars samples. Most of the antibodies enabled sensitivities at the 1-10ppb level and some even at the ppt level. The multiplex immunoassay allowed the detection of B[a]P as well as aromatic sulfones in a water/methanol extract of an Early Cretaceous lignite sample (c.a., 140 Ma) representing type IV kerogen. No L- or D-aromatic amino acids were detected, reflecting the advanced diagenetic stage and the fossil nature of the sample. The results demonstrate the ability of the liquid extraction by ultrasonication and the versatility of the multiplex inhibitory immunoassays in the SOLID instrument to discriminate between organic matter derived from life and nonlife processes, an essential step toward life detection outside Earth., This work was supported by granted projects AYA2011-24803, ESP2014-51989-P, and ESP2015-69540-R, from the Ministry of Economy and Competitiveness (MINECO) of Spain, and by Grant No. ST/N000803/1 (United Kingdom). A. G-C was a fellow of Plan de Formación from INTA.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Environmental parameters, and not phylogeny, determine the composition of extracellular polymeric substances in microbial mats from extreme environments

  • Blanco, Yolanda
  • Rivas, Luis A.
  • González-Toril, Elena
  • Ruiz Bermejo, Marta
  • Moreno-Paz, Mercedes
  • Parro-García, Víctor
  • Palacín, Arantxa
  • Aguilera, Ángeles
  • Puente-Sánchez, Fernando
The ability to establish biofilms is a key trait for microorganisms growing in extreme environments. The extracellular polymeric substances (EPS) present in biofilms provide not only surface attachment, but also protection against all kinds of environmental stressors, including desiccation, salinity, temperature or heavy metal pollution. The acquisition of suitable biofilm characteristics might thus be an important process mediating the adaptation of microorganisms to novel environmental conditions. In this work we have characterized the EPS of 20 phylogenetically diverse biofilms collected in situ from five contrasting extreme environments, including two geothermal areas (Copahue, Argentina; Seltun, Iceland), two cold areas (Pastoruri glacier, Peru; Byers Peninsula, Antarctica) and one extremely acidic river (Río Tinto, Spain). Biofilms were subjected to biochemical characterization, glycan profiling and immunoprofiling with an antibody microarray. Our results showed that environmental conditions strongly influence biofilm characteristics, with microorganisms from the same environment achieving similar EPS compositions regardless of the phylogeny of their main species. The concentration of some monosaccharides in the EPS could be related to environmental conditions such as temperature or heavy metal toxicity, suggesting that in some cases stress resistance can be mediated by specific sugars. Overall, our results highlight the existence of conserved EPS compositional patterns for each extreme environment, which could in turn be exploited to engineer ecological adaptations in genetically modified microorganisms., This work was funded by the Spanish “Secretaría de Estado de Investigación, Desarrollo e Innovación” from the Economy and Competitiveness Ministry (MINECO) grants N° AYA2011-24803, EPS2014-58494-R, ESP2015-69540-R, ESP2014-55811-C2-2, and ESP2014-51989-P. FPS was supported by the MINECO grant CTM2016-80095-C2-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling the kinetics and structural property evolution of a versatile reaction: Aqueous HCN polymerization

  • Fernández, Amparo
  • Ruiz Bermejo, Marta
  • Fuente, José Luis de la
The kinetics of the reaction of the synthesis of HCN polymers in aqueous medium at high temperatures have been analysed to ascertain a suitable model for this material, for which it was recently demonstrated that prebiotic chemistry may now be adapted in the development of a new generation of high performance coatings and adhesives with biomedical applications. These experimental conditions were chosen for the simplicity of the reagents, being particularly convenient in regard to potential industrial scale-up of coating technology, where these polymers have revealed an interesting field of application. The kinetics of the precipitation polymerization of HCN in water were studied under isothermal conditions at four different temperatures between 75 °C and 90 °C throughout gravimetric measurements. The use of the Kamal–Sourour autocatalytic kinetic model was proposed, properly describing the overall formation process of this insoluble HCN polymer. All of the kinetic parameters, including reaction orders, kinetic constants and activation energy, were determined for the cross-linking polymerization reaction under study, and a relevant autocatalysis effect was observed. An isoconversion method was also used to analyse the variation of the global activation energy with conversion; and characterization by means of elemental analysis, Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) was carried out. This study demonstrates the autocatalytic, robust and straightforward character of this heterogeneous aqueous HCN polymerization, and to the best of our knowledge, this report describes the first time that a systematic and extended kinetic analysis has been conducted to obtain a more comprehensive and deeper understanding of this complex reaction, which is of great interest to the origin of life and, currently, to materials science., The authors are grateful to the students Daniel Rojo and Sergio Martín for their contributions, to María Teresa Fernández for the FTIR spectra recorded and Laura Barrios for her help with the statistical analysis, and for the financial support through the project ESP2014-51989-P of the Spanish MINECO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detecting Nonvolatile Life- and Nonlife-Derived Organics in a Carbonaceous Chondrite Analogue with a New Multiplex Immunoassay and Its Relevance for Planetary Exploration

  • Moreno-Paz, Mercedes
  • Gómez-Cifuentes, Ana
  • Ruiz Bermejo, Marta
  • Hofstetter, Oliver
  • Maquieira, Ángel
  • Manchado, Juan Manuel
  • Morais, Sergi
  • Sephton, Mark A.
  • Niessner, Reinhard
  • Knopp, Dietmar
  • Parro-García, Víctor
Potential martian molecular targets include those supplied by meteoritic carbonaceous chondrites such as amino acids and polycyclic aromatic hydrocarbons and true biomarkers stemming from any hypothetical martian biota (organic architectures that can be directly related to once-living organisms). Heat extraction and pyrolysis-based methods currently used in planetary exploration are highly aggressive and very often modify the target molecules, making their identification a cumbersome task. We have developed and validated a mild, nondestructive, multiplex inhibitory microarray immunoassay and demonstrated its implementation in the SOLID (Signs of Life Detector) instrument for simultaneous detection of several nonvolatile life- and nonlife-derived organic molecules relevant in planetary exploration and environmental monitoring. By utilizing a set of highly specific antibodies that recognize D- or L-aromatic amino acids (Phe, Tyr, Trp), benzo[a]pyrene (B[a]P), pentachlorophenol, and sulfone-containing aromatic compounds, respectively, the assay was validated in the SOLID instrument for the analysis of carbon-rich samples used as analogues of the organic material in carbonaceous chondrites or even Mars samples. Most of the antibodies enabled sensitivities at the 1–10 ppb level and some even at the part-per-trillion level. The multiplex immunoassay allowed the detection of B[a]P as well as aromatic sulfones in a water/methanol extract of an Early Cretaceous lignite sample (ca. 140 Ma) representing type IV kerogen. No L- or D-aromatic amino acids were detected, reflecting the advanced diagenetic stage and the fossil nature of the sample. The results demonstrate the ability of the liquid extraction by ultrasonication and the versatility of the multiplex inhibitory immunoassays in the SOLID instrument to discriminate between organic matter derived from life and nonlife processes, an essential step toward life detection outside Earth, This work was supported by granted projects AYA2011-24803, ESP2014-51989-P, and ESP2015-69540-R, from the Ministry of Economy and Competitiveness (MINECO) of Spain, and by Grant No. ST/N000803/1 (United Kingdom). A. G-C was a fellow of ‘‘Plan de Formación from INTA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental conditions affecting the kinetics of aqueous HCN polymerization as revealed by UV–vis spectroscopy

  • Marín-Yaseli, Margarita R.
  • Moreno, Miguel
  • Fuente, José Luis de la
  • Briones, Carlos
  • Ruiz Bermejo, Marta
HCN polymerization is one of the most important and fascinating reactions in prebiotic chemistry, and interest in HCN polymers in the field of materials science is growing. However, little is known about the kinetics of the HCN polymerization process. In the present study, a first approach to the kinetics of two sets of aqueous HCN polymerizations, from NH4CN and NaCN, at middle temperatures between 4 and 38 °C, has been carried out. For each series, the presence of air and salts in the reaction medium has been systematically explored. A previous kinetic analysis was conducted during the conversion of the insoluble black HCN polymers obtained as gel fractions in these precipitation polymerizations for a reaction of one month, where a limit conversion was achieved at the highest polymerization temperature. The kinetic description of the gravimetric data for this complex system shows a clear change in the linear dependence with the polymerization temperature for the reaction from NH4CN, besides a relevant catalytic effect of ammonium, in comparison with those data obtained from the NaCN series. These results also demonstrated the notable influence of air, oxygen, and the saline medium in HCN polymer formation. Similar conclusions were reached when the sol fractions were monitored by UV–vis spectroscopy, and a Hill type correlation was used to describe the polymerization profiles obtained. This technique was chosen because it provides an easy, prompt and fast method to follow the evolution of the liquid or continuous phase of the process under study., The authors are grateful to the Instituto Nacional de Técnica Aeroespacial, “Esteban Terradas” (INTA) for financial support through the FPI fellowship program, of M.R.M.-Y. Funding provided by grants ESP2014-51989-P (to M.R.-B.) and BIO2016-79618-R (to C.B.) of the Spanish MINECO is acknowledged. C.B. also thanks the interdisciplinary framework provided by COST Action TD1308 (‘Origins and evolution of life on Earth and in the Universe’).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetic and chemorheological modelling of the polymerization of 2,4- Toluenediisocyanate and ferrocene-functionalized hydroxyl-terminated polybutadiene

  • Lucio, Beatriz
  • Fuente, José Luis de la
The reaction of 2,4-toluenediisocyanate (2,4-TDI) and a metallocenic-prepolymer derived from hydroxyl-terminated polybutadiene (HTPB) was studied in bulk and under isothermal conditions (50–80 °C) by rheological methods. Two regions distinguished and limited by the gel point, identified as the crossover of loss tangent (tan δ) at different frequencies, were analysed from different rheological properties during the curing process of this novel metallo-polyurethane (PU). The initial part of this polymerization, dominated by the viscous behaviour (from η0 ≈ 5 Pa s to η = 250 Pa s), was modelled through the Arrhenius isothermal model, in which the presence of two rheokinetic stages, due to different isocyanate groups in the 2 and 4 positions for this asymmetric monomer, was found until the gelation is reached. The contributions of the main reactions for the region analysed, before the gel point of this polyaddition, are discussed. The gel transition was identified, and the viscoelastic behaviour of the gelation process was studied in depth. In addition, from the evolution of the storage modulus (G′) recorded, the overall polymerization reaction was described by a Kamal-Sourour kinetic expression for the reaction rate. The different kinetic parameters obtained for the autocatalytic model used yielded predictions that agree very well with the experimental data, finding a significant autocatalytic effect. An isoconversional method allowed the determination of the dependence of the activation energy on the conversion degree during the network formation of this advanced functional ferrocene-PU, which is of great interest in rocket technology research for the development of the aerospace industry., The authors are grateful to INTA for the financial support through the FPI fellowship programme (2011-2015) and to the Spanish MINECO from the project ESP2014-51989-P., Peer reviewed