Pasar al contenido principal

DESARROLLO CIENTIFICO Y TECNOLOGICO DEL INSTRUMENTO X-IFU DE LA MISION ATHENA DE LA ESA: COORDINACION CIENTIFICA DE X-IFU Y SOFTWARE DE PROCESADO DE EVENTOS

ESP2014-53672-C3-1-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Athena X-IFU event reconstruction software: SIRENA

  • Ceballos, María Teresa
  • Cobo, Beatriz
  • Peille, Philippe
  • Wilms, Jörn
  • Brand, T.
  • Dauser, Thomas
  • Bandler, Simon R.
  • Smith, S.
Trabajo presentado a la Conferencia: Exploring the Hot and Energetic Universe: The first scientific conference dedicated to the Athena X-ray observatory; celebrada en Madrid (España) del 8 a 10 de septiembre de 2015., This contribution describes the status and technical details of the SIRENA package, the software currently in development to perform the on board event energy reconstruction for the Athena calorimeter X-IFU. This on board processing will be done in the X-IFU DRE unit and it will consist in an initial triggering of event pulses followed by an analysis (with the SIRENA package) to determine the energy content of such events.The current algorithm used by SIRENA is the optimal filtering technique (also used by ASTRO-H processor) although some other algorithms are also being tested.Here we present these studies and some preliminary results about the energy resolution of the instrument based on simulations done with the SIXTE simulator (http://www.sternwarte.uni-erlangen.de/research/sixte/) in which SIRENA is integrated., This work has been funded by the Spanish Ministries MICINN and MINECO under projects ESP2006-13608-C02-01, AYA2009-08059, AYA2010-21490-C02-01, AYA2012-39767-C02-01, ESP2013-48637-C2-1-P, ESP2014-53672-C3-1-P., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Athena: ESA's X-ray observatory for the late 2020s

  • Barcons, Xavier
  • Barret, Didier
  • Decourchelle, A.
  • Herder, J. W. den
  • Fabian, Andrew C.
  • Matsuhara, H.
  • Lumb, D.
  • Nandra, K.
  • Piro, Luigi
  • Smith, R. K.
  • Willingale, Richard
Observations of the X-ray sky after the next decade will most likely be dominated by Athena (Advanced Telescope for High ENergy Astrophysics), the second large mission of ESA's Cosmic Vision 2015–2035 programme. Athena has been conceived to address the “Hot and Energetic Universe” science theme, which focuses on the assembly and evolution of hot baryons in cosmic structures as well as the physics and energetic output generated by accreting super-massive black holes, along with the relationship between the two processes, dubbed cosmic feedback. Thanks to its transformational capabilities, Athena will enable bringing all of today's XMM-Newton's hot science topics to a new stage. In this paper, we summarize the Athena science case, science requirements, as well as the expected mission performance, mission concept, and its status., This research was supported by the Spanish Ministry of Economy and Competitiveness, ESP2014-53672-C3-1-P and AYA2015-64346-C2-1-P., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

SIRENA: Software for Athena X-IFU event reconstruction

  • Ceballos, María Teresa
  • Cobo, Beatriz
  • Peille, Philippe
  • Wilms, Jörn
  • Brand, T.
  • Dauser, Thomas
  • Bandler, Simon R.
  • Smith, S.
SIRENA is a software prolotype package currently in development for the reconstruction of the energy of the X-ray events detected by the X-IFU instrument of the Athena observatory. During this development phase it is integrated in a larger project for Athena end-t<>-end simolations (SIXTE), where X-IFU data can be simulated, initially triggered and finally, energy reconstructed, thus helping in the assessment of different instrument configurations. SIRENA implements different analysis and triggering algorithms with the aim of testing their performance in terms of energy resolution and computing resources. The best performance algorithms, optimized for in-flight use, will be finally implernented on board in the X-IFU Digital Readout Electronics (ORE) unit., This work has been funded by the Spanish Ministry MINECO under project ESP2014-53672-C3-l-P, co-funded by PEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

SIRENA software for Athena X-IFU event reconstruction

  • Ceballos, María Teresa
  • Cobo, Beatriz
  • Peille, Philippe
  • Wilms, Jörn
  • Brand, T.
  • Dauser, Thomas
  • Bandler, Simon R.
  • Smith, S.
Trabajo presentado a la XXV Astronomical Data Analysis Software and Systems Conference, celebrada en Sydney, Australia del 25 al 30 de octubre de 2015., SIRENA is a software prototype package currently in development for the reconstruction of the energy of the X-ray events detected by the X-IFU instrument of the Athena observatory. During this development phase it is integrated in a larger project for Athena end-to-end simulations (SIXTE), where X-IFU data can be simu- lated, inititally triggered and finally, energy reconstructed, thus helping in the assesment of different instrument configurations. SIRENA implements different analysis and triggering algorithms with the aim of testing their performance in terms of energy resolution and computing resources. The best performance algorithms, optimized for in-flight use, will be finally implemented on board in the X-IFU Digital Readout Electronics (DRE) unit., This work has been funded by the MINECO under project ESP2014-53672-C3-1-P, co-funded by FEDER funds., XXV (2015), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

SIRENA: software Athena X-IFU event reconstruction

  • Ceballos, María Teresa
  • Cobo, Beatriz
  • Peille, Philippe
  • Wilms, Jörn
  • Brand, T.
  • Dauser, Thomas
  • Bandler, Simon R.
  • Smith, S.
Póster presentado a la XXV Astronomical Data Analysis Software and Systems Conference, celebrada en Sydney, Australia del 25 al 30 de octubre de 2015., SIRENA is the software aimed at performing the on board event energy reconstruction for the Athena calorimeter X-IFU. This on board processing will be done in the X-IFU Digital Readout Electronics (DRE) unit and it will consist in an initial triggering of event pulses followed by an analysis (with the SIRENA package) to determine the energy content of such events., This work has been funded by the Spanish Ministries MICINN and MINECO under projects ESP2006-13608-C02-01, AYA2009-08059, AYA2010-21490-C02-01, AYA2012-39767-C02-01,ESP2013-48637-C2-1-P,ESP2014-53672-C3-1-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

SIRENA: a software package for the energy reconstruction of the Athena X-IFU events

  • Ceballos, María Teresa
  • Cobo, Beatriz
  • Peille, Philippe
  • Wilms, Jörn
  • Brand, T.
  • Dauser, Thomas
  • Bandler, Simon R.
  • Smith, S.
Trabajo presentado a la XXVI Astronomical Data Analysis Software and Systems Conference, celebrada del 16 al 20 de octubre de 2016 en Trieste, Italy., SIRENA is the software package developed to reconstruct the energy of the X-ray events detected by the X-IFU instrument of the Athena observatory. It is currently integrated in a larger project for end-to-end simulations. Data are simulated and inititally triggered by the SIXTE and afterwards the energy is reconstructed by SIRENA. While the baseline implementation is based on the optimal filtering technique, we present some other algorithms that are also being considered, such as covariance matrices or resistance space analysis. The performace of these algorithms should be finally analyzed in terms of energy resolution and computing resources. The integration of SIRENA into SIXTE allows an integral study of different triggering algorithms, reconstruction techniques, and instrument configurations, and their optimization for in-flight use. The best performance algorithms for event triggering and energy determination will be finally implemented on board in the X-IFU Digital Readout Electronics (DRE) unit., This work has been funded by the Spanish Ministry MINECO under projects AYA2012-39767-C02-01, ESP2013-48637-C2-1-P and ESP2014-53672-C3-1-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

SIRENA: Software for Athena X-IFU event reconstruction

  • Ceballos, María Teresa
  • Cobo, Beatriz
  • Peille, Philippe
  • Wilms, Jörn
  • Brand, T.
  • Dauser, Thomas
  • Bandler, Simon R.
  • Smith, S.
Póster presentado a la XXVI Astronomical Data Analysis Software and Systems Conference, celebrada del 16 al 20 de octubre de 2016 en Trieste, Italy., SIRENA is the software aimed at performing the on board event energy reconstruction for the Athena calorimeter X-IFU. This on board processing will be done in the X-IFU Digital Readout Electronics (DRE) unit and it will consist in an initial triggering of event pulses followed by an analysis (with the SIRENA package) to determine the energy content of such events., This work has been funded by the Spanish Ministry MINECO under project ESP2014-53672-C3-1-P, co-funded by FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Athena X-IFU event reconstruction: Extreme Learning Machine approach

  • Ceballos, María Teresa
  • Cobo, Beatriz
Trabajo presentado a la XXVII Astronomical Data Analysis Software and Systems Conference, celebrada del 22 al 26 de octubre de 2017 en Santiago de Chile, Chile., The X-ray Observatory Athena (Nandra et al. 2013) was proposed in April 2014 as the mission to implement the science theme "The Hot and Energetic Universe" selected by ESA for L2 (the second Large-class mission in ESA’s Cosmic Vision science programme). One of the two X-ray detectors designed to be onboard Athena is the X-IFU (Barret et al. 2016), a cryogenic microcalorimeter based on Transition Edge Sensor (TES) technology that will provide spatially resolved high-resolution spectroscopy. X-IFU will be developed by an international consortium led by IRAP (PI), SRON (co-PI) and IAPS/INAF (co-PI) and involving ESA Member States, Japan and the United States., The X-ray photons absorbed in X-IFU generate intensity pulses that must be detected and reconstructed on-board to recover their energy, position and arrival time. The software prototype package (SIRENA 1) in development as an anticipated contribution of IFCA/Spain to X-IFU through the Digital Readout Electronics (DRE) unit (Ravera et al. 2014), is currently testing a set of processing algorithms with the aim of finding the best compromise between performance and availability of on-board computing resources., The optimal filtering has recently been chosen as the baseline algorithm but other techniques are still under study in an effort to get the better results at the lower computing cost. In particular at IFCA, we are currently investigating the performance of the Extreme Learning Machine (ELM) algorithm for single-hidden layer feedforward neural networks (SLFNs) for the reconstruction of the pulses in the X-IFU data signal., This work has been funded by the Spanish Ministry MINECO under project ESP2014-53672-C3-1-P, co-funded by FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Athena X-IFU event reconstruction: Extreme Learning Machine approach

  • Ceballos, María Teresa
  • Cobo, Beatriz
  • Gutiérrez, José M.
Póster presentado a la XXVII Astronomical Data Analysis Software and Systems Conference, celebrada del 22 al 26 de octubre de 2017 en Santiago de Chile, Chile., SIRENA is the software aimed at performing the on board event energy reconstruction for the Athena calorimeter X-IFU, in the Digital Readout Electronics unit. Processing will consist in an initial triggering of event pulses followed by an analysis (with SIRENA) to determine the energy content of events. Optimal filtering has been chosen as the baseline algorithm but other techniques are still under study in an effort to get the better results at the lower computing cost. Here we show the performance of the Extreme Learning Machine (ELM) algorithm for single-hidden layer feedforward neural networks (SLFNs)., This work has been funded by the Spanish Ministry MINECO under projects ESP2014-53672-C3-1-P & ESP2016-76683-C3-1-R, co-funded by FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The ATHENA X-ray Integral Field Unit (X-IFU)

  • Barret, Didier
  • Ceballos, María Teresa
  • Mas-Hesse, J. Miguel
  • Cobo, Beatriz
Event: SPIE Astronomical Telescopes + Instrumentation, 2018, Austin, Texas, United States., The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with further ESA member state contributions from Belgium, Finland, Germany, Poland, Spain, Switzerland and two international partners from the United States and Japan: et al., The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5’ equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution of 2.5 eV up to 7 keV on ∼ 5” pixels. The X-IFU is based on a large format array of super-conducting molybdenum-gold Transition Edge Sensors cooled at ∼ 90 mK, each coupled with an absorber made of gold and bismuth with a pitch of 249 μm. A cryogenic anti-coincidence detector located underneath the prime TES array enables the non X-ray background to be reduced. A bath temperature of ∼ 50 mK is obtained by a series of mechanical coolers combining 15K Pulse Tubes, 4K and 2K Joule-Thomson coolers which pre-cool a sub Kelvin cooler made of a 3He sorption cooler coupled with an Adiabatic Demagnetization Refrigerator. Frequency domain multiplexing enables to read out 40 pixels in one single channel. A photon interacting with an absorber leads to a current pulse, amplified by the readout electronics and whose shape is reconstructed on board to recover its energy with high accuracy. The defocusing capability offered by the Athena movable mirror assembly enables the X-IFU to observe the brightest X-ray sources of the sky (up to Crab-like intensities) by spreading the telescope point spread function over hundreds of pixels. Thus the X-IFU delivers low pile-up, high throughput (< 50%), and typically 10 eV spectral resolution at 1 Crab intensities, i.e. a factor of 10 or more better than Silicon based X-ray detectors. In this paper, the current X-IFU baseline is presented, together with an assessment of its anticipated performance in terms of spectral resolution, background, and count rate capability. The X-IFU baseline configuration will be subject to a preliminary requirement review that is scheduled at the end of 2018., We acknowledge support from the Athena Science Study Team, the Athena Working Group Chairs, the Athena Topical Panel Chairs and the Topical Panel members in strengthening the X-IFU top level performance requirements. Particular thanks go to: E. Rasia, V. Biffi, S. Borgani and K. Dolag for providing cosmological hydrodynamic simulations of a cluster used to produce simulation of X-IFU observation presented in Fig. 2; P.T. O'Brien for assistance with Sect. 2.2.1, A.C. Fabian and C. Pinto for providing inputs for Figure 1. We also thank the ESA project team, and in particular Mark Ayre and Ivo Ferreira, for their work on the assessment of the ToO efficiency requirement. The Italian contribution to X-IFU is supported through the ASI contractn. 2015-046-R.0. XB, MTC and BC acknowledge nancial support by MINECO through grant ESP2014-53672-C3-1-P. A.R., P.O, and A.J. were supported by Polish NSC grants: 2015/17/B/ST9/03422 and 2015/18/M/ST9/00541. GR, ER, YN, and PJ acknowledges support by FNRS and Prodex (Belspo). This work was supported by the French Space Agency (CNES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The Athena X-ray Integral Field Unit (X-IFU)

  • Barret, Didier
  • Barcons, Xavier
  • Mas-Hesse, J. Miguel
  • Ceballos, María Teresa
  • Cobo, Beatriz
Event: SPIE Astronomical Telescopes + Instrumentation, 2016, Edinburgh, United Kingdom., X-IFU: et al., The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with ~ 5" pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, driving the main performance parameters of the X-IFU, namely the spectral resolution, the field of view, the effective area, the count rate capabilities, the instrumental background. We also illustrate the breakthrough potential of the X-IFU for some observatory science goals. Then we brie y describe the X-IFU design as defined at the time of the mission consolidation review concluded in May 2016, and report on its predicted performance. Finally, we discuss some options to improve the instrument performance while not increasing its complexity and resource demands (e.g. count rate capability, spectral resolution)., We acknowledge support from the Athena Science Study Team, the Athena Working Group Chairs, the Athena Topical Panel Chairs and the Topical Panel members in strengthening the X-IFU top level performance requirements. Particular thanks go to: E. Rasia, V. Biffi, S. Borgani and K. Dolag for providing cosmological hydrodynamic simulations of a cluster used to produce simulation of X-IFU observation presented in Fig. 2; P.T. O'Brien for assistance with Sect. 2.2.1, A.C. Fabian and C. Pinto for providing inputs for Figure 1. We also thank the ESA project team, and in particular Mark Ayre and Ivo Ferreira, for their work on the assessment of the ToO efficiency requirement. The Italian contribution to X-IFU is supported through the ASI contract n. 2015-046-R.0. XB, MTC and BC acknowledge nancial support by MINECO through grant ESP2014-53672-C3-1-P. A.R., P.O, and A.J. were supported by Polish NSC grants: 2015/17/B/ST9/03422 and 2015/18/M/ST9/00541. GR, ER, YN, and PJ acknowledges support by FNRS and Prodex (Belspo). This work was supported by the French Space Agency (CNES)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Performance assessment of different pulse reconstruction algorithms for the ATHENA X-ray Integral Field Unit

  • Peille, Philippe
  • Ceballos, María Teresa
  • Cobo, Beatriz
  • Wilms, Jörn
  • Bandler, Simon R.
  • Smith, Stephen J.
  • Dauser, Thomas
  • Brand, T.
  • Hartog, Roland H. den
  • Plaa, Jelle de
  • Barret, Didier
  • Herder, J. W. den
  • Piro, Luigi
  • Barcons, Xavier
  • Pointecouteau, E.
Event: SPIE Astronomical Telescopes + Instrumentation, 2016, Edinburgh, United Kingdom., The X-ray Integral Field Unit (X-IFU) microcalorimeter, on-board Athena, with its focal plane comprising 3840 Transition Edge Sensors (TESs) operating at 90 mK, will provide unprecedented spectral-imaging capability in the 0.2-12 keV energy range. It will rely on the on-board digital processing of current pulses induced by the heat deposited in the TES absorber, as to recover the energy of each individual events. Assessing the capabilities of the pulse reconstruction is required to understand the overall scientific performance of the X-IFU, notably in terms of energy resolution degradation with both increasing energies and count rates. Using synthetic data streams generated by the X-IFU End-to-End simulator, we present here a comprehensive benchmark of various pulse reconstruction techniques, ranging from standard optimal filtering to more advanced algorithms based on noise covariance matrices. Beside deriving the spectral resolution achieved by the different algorithms, a first assessment of the computing power and ground calibration needs is presented. Overall, all methods show similar performances, with the reconstruction based on noise covariance matrices showing the best improvement with respect to the standard optimal filtering technique. Due to prohibitive calibration needs, this method might however not be applicable to the X-IFU and the best compromise currently appears to be the so-called resistance space analysis which also features very promising high count rate capabilities., We thank Harvey Moseley and Dale Fixsen for helpful discussions on covariance reconstructions and principal component analysis. X. Barcons, M.T. Ceballos and B. Cobo acknowledge nancial support from Spanish Ministry of Economy and Competitiveness (MINECO) under grant ESP2014-53672-C3-1-P, co-funded by FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

TESSIM: a simulator for the Athena-X-IFU

  • Wilms, Jörn
  • Smith, Stephen J.
  • Peille, Philippe
  • Ceballos, María Teresa
  • Cobo, Beatriz
  • Dauser, Thomas
  • Brand, T.
  • Hartog, Roland H. den
  • Bandler, Simon R.
  • Plaa, Jelle de
  • Herder, J. W. den
Event: SPIE Astronomical Telescopes + Instrumentation, 2016, Edinburgh, United Kingdom., We present the design of tessim, a simulator for the physics of transition edge sensors developed in the framework of the Athena end to end simulation effort. Designed to represent the general behavior of transition edge sensors and to provide input for engineering and science studies for Athena, tessim implements a numerical solution of the linearized equations describing these devices. The simulation includes a model for the relevant noise sources and several implementations of possible trigger algorithms. Input and output of the software are standard FITS- files which can be visualized and processed using standard X-ray astronomical tool packages. Tessim is freely available as part of the SIXTE package (http://www.sternwarte.uni-erlangen.de/research/sixte/)., This work made use of ISIS functions (ISISscripts) provided by ECAP/Remeis observatory and MIT (http://www.sternwarte.uni-erlangen.de/isis/). We thank J.E. Davis for the development of the SLXfig module, which was used to create all gures in this paper. JW, TB, and TD acknowledge funding by the Deutsches Zentrum f ur Luft- und Raumfahrt contract 50QR1402. MTC and BC acknowledge nancial support by MINECO through grant ESP2014-53672-C3-1-P., Peer reviewed