Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Designing 3D topological insulators by 2D-Xene (X = Ge, Sn) sheet functionalization in GaGeTe-type structures

  • Pielnhofer, Florian
  • Menshchikova, Tatiana V.
  • Rusinov, Igor P.
  • Zeugner, Alexander
  • Sklyadneva, Irina Yu.
  • Heid, Rolf
  • Bohnen, Klaus-Peter
  • Golub, Pavlo
  • Baranov, Alexey I.
  • Chulkov, Eugene V.
  • Pfitzner, Arno
  • Ruck, Michael
  • Isaeva, Anna
State-of-the-art theoretical studies anticipate a 2D Dirac system in the >heavy> analogues of graphene, free-standing buckled honeycomb-like Xenes (X = Si, Ge, Sn, Pb, etc.). Herewith we regard a 2D sheet, which structurally and electronically resembles Xenes, in a 3D periodic, rhombohedral structure of layered AXTe (A = Ga, In; X = Ge, Sn) bulk materials. This structural family is predicted to host a 3D strong topological insulator with Z = 1;(111) as a result of functionalization of the Xene derivative by covalent interactions. The parent structure GaGeTe is a long-known bulk semiconductor; the >heavy>, isostructural analogues InSnTe and GaSnTe are predicted to be dynamically stable. Spin-orbit interaction in InSnTe opens a small topological band gap with inverted gap edges that are mainly composed of the In-5s and Te-5p states. Our simulations classify GaSnTe as a semimetal with topological properties, whereas the verdict for GaGeTe is not conclusive and urges further experimental verification. The AXTe family structures can be regarded as stacks of 2D layered cut-outs from a zincblende-type lattice and are composed of elements that are broadly used in modern semiconductor devices; hence they represent an accessible, attractive alternative for applications in spintronics. The layered nature of AXTe should facilitate the exfoliation of their hextuple layers and manufacture of heterostructures., F. P., A. I., A. Z., A. P., and M. R. acknowledge the financial support by the German Research Foundation (DFG) in the framework of Special Priority Programme ‘‘Topological insulators’’ (SPP 1666) and ERANET-Chemistry. T. V. M. and I. P. R. acknowledge support by the ‘‘Tomsk State University competitiveness improvement programme’’ and the Saint Petersburg State University project no. 15.61.202.2015. I. P. R. acknowledges support by the Ministry of Education and Science of the Russian Federation within the framework of the governmental program ‘‘Megagrants’’ (state task no. 3.8895.2017/P220). E. V. C. acknowledges the Spanish Ministry of Science and Innovation (grant no. FIS2013-48286-C02-02-P and FIS2013-48286-C02-01-P) and the Basque Departamento de Educacion, UPV/EHU (grant IT-756-13). P. G. and A. B. acknowledge the German Research Foundation (grant BA-4911/1-1)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geometric and electronic structure of the Cs-doped Bi2Se3(0001) surface

  • Otrokov, Mikhail M.
  • Ernst, Arthur
  • Mohseni, K.
  • Fulara, H.
  • Roy, Sumalay
  • Castro, Germán R.
  • Rubio-Zuazo, J.
  • Ryabishchenkova, A. G.
  • Kokh, Konstantin A.
  • Tereshchenko, Oleg E.
  • Aliev, Ziya S.
  • Babanly, Mahammad B.
  • Chulkov, Eugene V.
  • Meyerheim, Holger L.
  • Parkin, S. S. P.
Using surface x-ray diffraction and scanning tunneling microscopy in combination with first-principles calculations, we have studied the geometric and electronic structure of Cs-deposited Bi2Se3(0001) surface kept at room temperature. Two samples were investigated: a single Bi2Se3 crystal, whose surface was Ar sputtered and then annealed at ∼500 ◦C for several minutes prior to Cs deposition, and a 13-nm-thick epitaxial Bi2Se3 film that was not subject to sputtering and was annealed only at ∼350 ◦C. In the first case, a considerable fraction of Cs atoms occupy top layer Se atoms sites both on the terraces and along the upper step edges where they form one-dimensional-like structures parallel to the step. In the second case, Cs atoms occupy the f cc hollow site positions. First-principles calculations reveal that Cs atoms prefer to occupy Se positions on the Bi2Se3(0001) surface only if vacancies are present, which might be created during the crystal growth or during the surface preparation process. Otherwise, Cs atoms prefer to be located in f cc hollow sites in agreement with the experimental finding for the MBE-grown sample., We acknowledge financial support from DFG through priority program SPP1666 (Topological Insulators), as well as by the University of the Basque Country (Grant Nos. GIC07IT36607 and IT-756-13), the Spanish Ministry of Science and Innovation (Grant Nos. FIS2013-48286-C02-02-P, FIS2013-48286-C02-01-P, and FIS2016-75862-P) and Tomsk State University Academic D.I. Mendeleev Fund Program in 2015 (research Grant No. 8.1.05.2015). Partial support by the Saint Petersburg State University project No. 15.61.202.2015 is also acknowledged. The study has also been supported by the Russian Science Foundation (project No. 17-12-01047) in part of the single crystal growth and structural characterization. Technical support by F. Weiss is gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant magnetic band gap in the rashba-split surface state of vanadium-doped BiTeI: A combined photoemission and Ab initio study

  • Klimovskikh, Ilya I.
  • Shikin, Alexander M.
  • Otrokov, Mikhail M.
  • Ernst, Arthur
  • Rusinov, Igor P.
  • Tereshchenko, Oleg E.
  • Golyashov, V. A.
  • Sánchez-Barriga, Jaime
  • Varykhalov, A. Yu.
  • Rader, Oliver
  • Kokh, Konstantin A.
  • Chulkov, Eugene V.
One of the most promising platforms for spintronics and topological quantum computation is the two-dimensional electron gas (2DEG) with strong spin-orbit interaction and out-of-plane ferromagnetism. In proximity to an s-wave superconductor, such 2DEG may be driven into a topologically non-Trivial superconducting phase, predicted to support zero-energy Majorana fermion modes. Using angle-resolved photoemission spectroscopy and ab initio calculations, we study the 2DEG at the surface of the vanadium-doped polar semiconductor with a giant Rashba-Type splitting, BiTeI. We show that the vanadium-induced magnetization in the 2DEG breaks time-reversal symmetry, lifting Kramers degeneracy of the Rashba-split surface state at the Brillouin zone center via formation of a huge gap of about 90 meV. As a result, the constant energy contour inside the gap consists of only one circle with spin-momentum locking. These findings reveal a great potential of the magnetically-doped semiconductors with a giant Rashba-Type splitting for realization of novel states of matter., The work was partially supported by grant of Saint Petersburg State University for scientific investigations (N. 15.61.202.2015). This study was supported by the Russian Science Foundation (project N. 17-12-01047, in part of crystal growth, structural characterization and ARPES measurements (Figs 1, 2)). The funding by the University of the Basque Country (Grant Nos GIC07IT36607 and IT-756-13), the Spanish Ministry of Science and Innovation (Grant Nos FIS2013-48286-C02-02-P, FIS2013-48286-C02-01-P, and FIS2016-75862-P) and Tomsk State University Academic D.I. Mendeleev Fund Program in 2015 (research grant N 8.1.05.2015) are also gratefully acknowledged. The authors also acknowledge support from the Russian-German laboratory at BESSY II, the “German-Russian Interdisciplinary Science Center”(G-RISC) program and the Impuls- und Vernetzungsfonds der Helmholtz-Gemeinschaft (Grant No. HRJRG-408)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly-ordered wide bandgap materials for quantized anomalous Hall and magnetoelectric effects

  • Otrokov, Mikhail M.
  • Menshchikova, Tatiana V.
  • Vergniory, Maia G.
  • Rusinov, Igor P.
  • Koroteev, Yuri M.
  • Bihlmayer, Gustav
  • Ernst, Arthur
  • Echenique, Pedro M.
  • Arnau, Andrés
  • Chulkov, Eugene V.
An interplay of spin-orbit coupling and intrinsic magnetism is known to give rise to the quantum anomalous Hall and topological magnetoelectric effects under certain conditions. Their realization could open access to low power consumption electronics as well as many fundamental phenomena like image magnetic monopoles, Majorana fermions and others. Unfortunately, being realized very recently, these effects are only accessible at extremely low temperatures and the lack of appropriate materials that would enable the temperature increase is a most severe challenge. Here, we propose a novel material platform with unique combination of properties making it perfectly suitable for the realization of both effects at elevated temperatures. The key element of the computational material design is an extension of a topological insulator (TI) surface by a thin film of ferromagnetic insulator, which is both structurally and compositionally compatible with the TI. Following this proposal we suggest a variety of specific systems and discuss their numerous advantages, in particular wide band gaps with the Fermi level located in the gap., We acknowledge support by the University of the Basque Country (Grant Nos. GIC07IT36607 and IT-756-13), the Spanish Ministry of Science and Innovation (Grant Nos. FIS2013-48286-C02-02-P, FIS2013-48286-C02-01-P, and FIS2016-75862-P) and Tomsk State University Academic DI Mendeleev Fund Program in 2015 (research grant N 8.1.05.2015). Partial support by the Saint Petersburg State University project No. 15.61.202.2015 is also acknowledged. AE acknowledges financial support from DFG through priority program SPP1666 (Topological Insulators)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Instability of the topological surface state in Bi2Se3 upon deposition of gold

  • Polyakov, A.
  • Tusche, C.
  • Ellguth, M.
  • Crozier, E.D.
  • Mohseni, K.
  • Otrokov, Mikhail M.
  • Zubizarreta, X.
  • Vergniory, Maia G.
  • Geilhufe, R. Matthias
  • Chulkov, Eugene V.
  • Ernst, Arthur
  • Meyerheim, Holger L.
  • Parkin, S. S. P.
Momentum-resolved photoemission spectroscopy indicates the instability of the Dirac surface state upon deposition of gold on the (0001) surface of the topological insulator Bi2Se3. Based on the structure model derived from extended x-ray absorption fine structure experiments showing that gold atoms substitute bismuth atoms, first-principles calculations provide evidence that a gap appears due to hybridization of the surface state with gold d states near the Fermi level. Our findings provide insights into the mechanisms affecting the stability of the surface state., We acknowledge financial support from DFG through priority program SPP1666 (Topological Insulators), the Spanish Ministry of Science and Innovation (Grants No. FIS2013-48286-C02-02-P and No. FIS2013-48286-C02-01-P), the Basque Government through the Nanomaterials project under the nanoGUNE2014 program (Grant No. IE05-151), the Tomsk State University Academic D. I. Mendeleev Fund Program in 2015 (Research Grant No. 8.1.05.2015), and partial support from Saint Petersburg State University (Project No. 15.61.202.2015). M.E. acknowledges support from the BMBF (Grant No. 05K12EF1). E.D.C. acknowledges research grants from the Dean, Faculty of Science, Simon Fraser University, and from NSERC. Sector 20 facilities at the Advanced Photon Source, and research at these facilities, are supported by the US Department of Energy Basic Energy Sciences, the Canadian Light Source and its funding partners, and the Advanced Photon Source. Use of the Advanced Photon Source, an Office of Science User Facility operated for the US Department of Energy (DOE) Office of Science by Argonne National Laboratory, was supported by the US DOE under Contract No. DE-AC02-06CH11357. M.G. acknowledges European Research Council under the European Union’s Seventh Framework Program (FP/2207-2013)/ERC Grant Agreement No. DM-321031., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interaction of cobalt atoms, dimers, and Co4 clusters with circumcoronene: A theoretical study

  • Alonso-Lanza, Tomás
  • Mañanes, Ángel
  • Ayuela, Andrés
We study the interaction of circumcoronene molecule CH with cobalt in the form of atoms, dimers, and clusters of four atoms. We find that the cobalt atom prefers to be on a hollow site in the edge zone. The cobalt dimer is bonded perpendicularly to another different hollow site in the edge zone. The Co cluster adopts a tetrahedral shape with a face parallel to circumcoronene, placing each of the three atoms over contiguous hollow sites, starting from the edge. Cobalt remains bonded to circumcoronene as Co molecules or Co clusters, rather than spread as isolated atoms, because the cobalt-cobalt interaction is stronger than the cobalt-carbon bond. The interaction with cobalt clusters induces a small magnetic moment on circumcoronene. The magnetic moment of cobalt is reduced when bonding to circumcoronene. There is charge transfer between those systems and its direction depends on the relative position of the cluster with respect to circumcoronene. We then propose that the presence of cobalt over circumcoronene or similar polycyclic-aromatic hydrocarbons can be detected in experiments, looking at the carbon isomer shift which arises due to the contact charge densities at the nuclei., This work has been partially supported by the Projects FIS2013-48286-C02-01-P and FIS2016-76617-P of the Spanish Ministry of Economy and Competitiveness MINECO, the Basque Government under the ELKARTEK project(SUPER), and the University of the Basque Country (Grant No. IT-756-13). T.A.-L. acknowledges the grant of the MPC Material Physics Center - San Sebastian., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large-gap magnetic topological heterostructure formed by subsurface incorporation of a ferromagnetic layer

  • Hirahara, Toru
  • Eremeev, Sergey V.
  • Shirasawa, Tetsuroh
  • Okuyama, Yuma
  • Kubo, Takayuki
  • Nakanishi, Ryosuke
  • Akiyama, Ryota
  • Takayama, Akari
  • Hajiri, Tetsuya
  • Ideta, Shin-ichiro
  • Matsunami, Matsunami
  • Sumida, Kazuki
  • Miyamoto, Koji
  • Takagi, Yasumasa
  • Tanaka, Kiyohisa
  • Okuda, Taichi
  • Yokoyama, Toshihiko
  • Kimura, Shin-ichi
  • Hasegawa, Shuji
  • Chulkov, Eugene V.
Inducing magnetism into topological insulators is intriguing for utilizing exotic phenomena such as the quantum anomalous Hall effect (QAHE) for technological applications. While most studies have focused on doping magnetic impurities to open a gap at the surface-state Dirac point, many undesirable effects have been reported to appear in some cases that makes it difficult to determine whether the gap opening is due to the time-reversal symmetry breaking or not. Furthermore, the realization of the QAHE has been limited to low temperatures. Here we have succeeded in generating a massive Dirac cone in a MnBiSe/BiSe heterostructure, which was fabricated by self-assembling a MnBiSe layer on top of the BiSe surface as a result of the codeposition of Mn and Se. Our experimental results, supported by relativistic ab initio calculations, demonstrate that the fabricated MnBiSe/BiSe heterostructure shows ferromagnetism up to room temperature and a clear Dirac cone gap opening of ∼100 meV without any other significant changes in the rest of the band structure. It can be considered as a result of the direct interaction of the surface Dirac cone and the magnetic layer rather than a magnetic proximity effect. This spontaneously formed self-assembled heterostructure with a massive Dirac spectrum, characterized by a nontrivial Chern number C = -1, has a potential to realize the QAHE at significantly higher temperatures than reported up to now and can serve as a platform for developing future >topotronics> devices., This work has been supported by Grants-In-Aid from Japan Society for the Promotion of Science (Nos. 15H05453, 16K13683, 19340078, and 23244066), the Toray Science Foundation, the Basque Country Government, Departamento de Educacion, Universidades e Investigacion (Grant No. IT-756-13), the Spanish Ministry of Science and Innovation (Grant Nos. FIS2010-19609-C02-01, FIS2013- 48286-C02-02-P, and FIS2013-48286-C02-01-P), the Tomsk State University Academic D.I. Mendeleev Fund Program (Grant No. 8.1.05.2015), and Saint Petersburg State University (project 15.61.202.2015). The ARPES experiments were performed under the UVSOR Proposal Nos. 25-808, 26-531, 27-533, 28-526, and S-15-MS-0034, and the SARPES experiments were performed under the HiSOR Proposal No. 15-A14. The XMCD measurements were performed under the UVSOR proposal number S-16-MS-2017. The LEED measurements were performed under the ISSP Proposal number H17-A250. The SQUID measurements were performed using facilities of the Cryogenic Research Center, the University of Tokyo., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modular design with 2D topological-insulator building blocks: Optimized synthesis and crystal growth and crystal and electronic structures of BixTeI (x = 2, 3)

  • Zeugner, Alexander
  • Kaiser, Martin
  • Schmidt, Peer
  • Menshchikova, Tatiana V.
  • Rusinov, Igor P.
  • Markelov, Anton V.
  • Van den Broek, Wouter
  • Chulkov, Eugene V.
  • Doert, Thomas
  • Ruck, Michael
  • Isaeva, Anna
Structural engineering of topological bulk materials is systematically explored with regard to the incorporation of the buckled bismuth layer [Bi], which is a 2D topological insulator per se, into the layered BiTeI host structure. The previously known bismuth telluride iodides, BiTeI and BiTeI, offer physical properties relevant for spintronics. Herewith a new cousin, BiTeI (sp.gr. R3m, a = 440.12(2) pm, c = 3223.1(2) pm), joins the ranks and expands this structural family. BiTeI = [Bi][BiTeI] represents a stack with strictly alternating building blocks. Conditions for reproducible synthesis and crystal-growth of BiTeI and BiTeI are ascertained, thus yielding platelet-like crystals on the millimeter size scale and enabling direct measurements. The crystal structures of BiTeI and BiTeI are examined by X-ray diffraction and electron microscopy. DFT calculations predict metallic properties of BiTeI and an unconventional surface state residing on various surface terminations. This state emerges as a result of complex hybridization of atomic states due to their strong intermixing. Our study does not support the existence of new stacking variants BiTeI with x > 3; instead, it indicates a possible homogeneity range of BiTeI. The series BiTeI-BiTeI-BiTeI illustrates the influence of structural modifications on topological properties., This work was supported by the German Research Foundation (DFG) in the framework of the Special Priority Program (SPP 1666) “Topological Insulators” and by the ERA-Chemistry Program. We acknowledge support by Academic D.I. Mendeleev Fund Program of Tomsk State University in 2015 (research grant No. 8.1.05.2015), by Saint Petersburg State University (project No. 15.61.202.2015), by the Spanish Ministry of Science and Innovation (grant nos. FIS2013- 48286-C02-02-P and FIS2013-48286-C02-01-P), and by the Basque Departamento de Educacion, UPV/EHU (grant IT756-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Regularities of the quantum spin Hall phase formation in three-dimensional tetradymite-like topological insulator thin films

  • Menshchikova, Tatiana V.
  • Silkina, O Yu.
  • Silkin, Igor V.
  • Kuznetsov, V. M.
  • Chulkov, Eugene V.
We present first-principles calculations of electronic structure and topological properties of thin films of tetradymite-like binary, ternary, and quaternary compounds. Two-dimensional topological insulators were found, including two septuple layer films of PbBi2Te4 with large band gap. We demonstrate that the Pb-based thin films inherit Z2 dependence on the film thickness from the >parent> quintuple-layer compounds. An effective way to induce the topological phase transition in the trivial thin films is proposed that does not require substantial changes in the in-plane lattice parameter and surface crystal structure., This paper is supported by Tomsk State University competitiveness improvement programme (Project No. 8.1.01.2017), the Saint Petersburg State University Project No. 15.61.202.2015, the Ministry of Education and Science of the Russian Federation within the framework of the governmental program Megagrants (State Task No. 3.8716.2017/220 or 3.8716.2017/9.10), the University of the Basque Country (Grants No. GIC07IT36607 and No. IT-756-13), the Spanish Ministry of Science and Innovation (Grants No. FIS2013-48286-C02-02-P, No. FIS2013-48286-C02-01-P, and No. FIS2016-75862-P)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reply to "comment on 'spin-orbit coupling induced gap in graphene on Pt(111) with intercalated Pb monolayer'"

  • Klimovskikh, Ilya I.
  • Otrokov, Mikhail M.
  • Voroshnin, Vladimir Yu.
  • Sostina, Daria
  • Petaccia, Luca
  • Di Santo, Giovanni
  • Thakur, Sangeeta
  • Chulkov, Eugene V.
  • Shikin, Alexander M.
In a recent article, we studied the electronic and spin structure of graphene on Pt(111) with intercalated Pb monolayer. By means of ARPES, we have shown that the Dirac cone of graphene is characterized by the gap between the π and π* states in this system. The spin texture of the π and π* states and its correspondence with the Kane and Mele model for graphene with spin−orbit gap have been unveiled by spinresolved ARPES. In the Comment on our paper, Dedkov and Voloshina claim that (1) the notation of the superstructure used in our work is incorrect, and (2) spin-resolved data treatment is inappropriate. In this Reply, we show that the superstructure notation is indeed correct. Moreover, the statistical analysis of the reported spin-resolved ARPES data and new experimental data with better statistics support the main conclusion of our article., The work was partially supported by grant of Saint Petersburg State University for scientific investigations (No. 15.61.202.2015) and DFG - SPbU grant No. 11.65.42.2017. We acknowledge support by the University of the Basque Country (Grant Nos. GIC07IT36607 and IT-756-13), the Spanish Ministry of Science and Innovation (Grant Nos. FIS2013-48286-C02-02-P, FIS2013-48286-C02-01-P, and FIS2016-75862-P), and Tomsk State University competitiveness improvement programme (Project No. 8.1.01.2017). The part of photoemission measurements was supported by Russian Science Foundation (Project No. 17-12-01047). The authors acknowledge support from the Russian−German laboratory at BESSY II and the “German−Russian Interdisciplinary Science Center”(G-RISC) program., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic perspective on the interplay between electronic and magnetic properties of magnetically doped topological insulators

  • Krieger, J. A.
  • Chang, Cui-Zu
  • Husanu, M.-A.
  • Sostina, Daria
  • Ernst, Arthur
  • Otrokov, Mikhail M.
  • Prokscha, T.
  • Schmitt, Thorsten
  • Suter, A.
  • Vergniory, Maia G.
  • Chulkov, Eugene V.
  • Moodera, J. S.
  • Strocov, Vladimir N.
  • Salman, Zaher
We combine low energy muon spin rotation (LE-μSR) and soft-x-ray angle-resolved photoemission spectroscopy (SX-ARPES) to study the magnetic and electronic properties of magnetically doped topological insulators, (Bi,Sb)2Te3. We find that one achieves a full magnetic volume fraction in samples of (V/Cr)x(Bi,Sb)2-xTe3 at doping levels x=0.16. The observed magnetic transition is not sharp in temperature indicating a gradual magnetic ordering. We find that the evolution of magnetic ordering is consistent with formation of ferromagnetic islands which increase in number and/or volume with decreasing temperature. Resonant ARPES at the V L3 edge reveals a nondispersing impurity band close to the Fermi level as well as V weight integrated into the host band structure. Calculations within the coherent potential approximation of the V contribution to the spectral function confirm that this impurity band is caused by V in substitutional sites. The implications of our results on the observation of the quantum anomalous Hall effect at mK temperatures are discussed., The work at PSI was supported by the Swiss National Science Foundation (SNF-Grant No. 200021_165910). We acknowledge support from DFG through priority program SPP1666 (Topological Insulators), University of the Basque Country (Grants No. GIC07IT36607 and No. IT-756-13), Spanish Ministry of Science and Innovation (Grants No. FIS2013-48286-C02-02-P, No. FIS2013-48286-C02-01-P, and No. FIS2016-75862-P) and Tomsk State University competitiveness improvement programme (Project No. 8.1.01.2017). Partial support by the Saint Petersburg State University Project No. 15.61.202.2015 is also acknowledged. At MIT, C.Z.C. and J.S.M. acknowledge support from the STC Center for Integrated Quantum Materials under NSF grant DMR-1231319 as well as grants NSF (DMR-1207469, DMR1700137), ONR (N00014-13-1-0301 and N00014-16-1-2657). C.Z.C also acknowledges the support from the startup grant provided by Penn State University., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin orientation of two-dimensional electrons driven by temperature-tunable competition of spin-orbit and exchange-magnetic interactions

  • Generalov, Alexander
  • Otrokov, Mikhail M.
  • Chikina, Alla
  • Kliemt, Kristin
  • Kummer, Kurt
  • Höppner, Marc
  • Güttler, Monika
  • Seiro, Silvia
  • Fedorov, Alexander
  • Schulz, Susanne
  • Danzenbächer, Steffen
  • Chulkov, Eugene V.
  • Geibel, Christoph
  • Laubschat, Clemens
  • Dudin, Pavel
  • Hoesch, Moritz
  • Kim, Timur
  • Radović, Ivan
  • Shi, Ming
  • Plumb, Nicholas C.
  • Krellner, Cornelius
  • Vyalikh, Denis V.
Finding ways to create and control the spin-dependent properties of two-dimensional electron states (2DESs) is a major challenge for the elaboration of novel spin-based devices. Spin–orbit and exchange–magnetic interactions (SOI and EMI) are two fundamental mechanisms that enable access to the tunability of spin-dependent properties of carriers. The silicon surface of HoRh2Si2 appears to be a unique model system, where concurrent SOI and EMI can be visualized and controlled by varying the temperature. The beauty and simplicity of this system lie in the 4f moments, which act as a multiple tuning instrument on the 2DESs, as the 4f projections parallel and perpendicular to the surface order at essentially different temperatures. Here we show that the SOI locks the spins of the 2DESs exclusively in the surface plane when the 4f moments are disordered: the Rashba-Bychkov effect. When the temperature is gradually lowered and the system experiences magnetic order, the rising EMI progressively competes with the SOI leading to a fundamental change in the spin-dependent properties of the 2DESs. The spins rotate and reorient toward the out-of-plane Ho 4f moments. Our findings show that the direction of the spins and the spin-splitting of the two-dimensional electrons at the surface can be manipulated in a controlled way by using only one parameter: the temperature., This work was supported by the German Research Foundation (DFG) (Grant Nos. VY64/1-3, GE602/2-1, GRK1621, and SFB1143) as well as by Research Grant No. 15.61.202.2015 of Saint Petersburg State University. We acknowledge Diamond Light Source for beamtime on the beamline I05 under proposal SI11512. The authors acknowledge experimental support from the SIS beamline at Swiss Light Source. The support by the Tomsk State University Academic D.I. Mendeleev Fund Program in 2015 (research grant N 8.1.05.2015), the University of the Basque Country (Grants Nos. GIC07IT36607 and Grant No. IT-756-13), and the Spanish Ministry of Science and Innovation (Grant Nos. FIS2013-48286-C02-02-P and FIS2013-48286-C02-01-P) is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stable carbon monosulfide nanostructures: Chain arrays and monolayers

  • Alonso-Lanza, Tomás
  • Aguilera-Granja, Faustino
  • González, J. W.
  • Ayuela, Andrés
Herein we show using theoretical predictions that carbon monosulfide compounds exhibit a variety of layered nanostructures, such as chain arrays, monolayers, and thin films. We show that semiconductor chain arrays are the most stable because they are mainly dimensionality driven by sp2 hybridization of the carbon orbitals. In contrast to the thin films, the monolayers are stable at room temperature in a semiconductor phase, which is followed in energy by a metallic phase. Moreover, we study a semiconductor-to-metal phase transition in the carbon monosulfide monolayers by strain engineering to control the conductivity and carrier mobility., This work was partially supported by Projects FIS2013-48286-C02-01-P and FIS2016-76617-P of the Spanish Ministry of Economy and Competitiveness MINECO, the Basque Government under the ELKARTEK project (SUPER), and the University of the Basque Country (Grant No. IT-756-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the Fermi velocity in Dirac materials with an electric field

  • Díaz-Fernández, Alvaro
  • Chico, Leonor
  • González, J. W.
  • Domínguez-Adame, Francisco
Dirac materials are characterized by energy-momentum relations that resemble those of relativistic massless particles. Commonly denominated Dirac cones, these dispersion relations are considered to be their essential feature. These materials comprise quite diverse examples, such as graphene and topological insulators. Band-engineering techniques should aim to a full control of the parameter that characterizes the Dirac cones: the Fermi velocity. We propose a general mechanism that enables the fine-tuning of the Fermi velocity in Dirac materials in a readily accessible way for experiments. By embedding the sample in a uniform electric field, the Fermi velocity is substantially modified. We first prove this result analytically, for the surface states of a topological insulator/semiconductor interface, and postulate its universality in other Dirac materials. Then we check its correctness in carbon-based Dirac materials, namely graphene nanoribbons and nanotubes, thus showing the validity of our hypothesis in different Dirac systems by means of continuum, tight-binding and ab-initio calculations., Tis work was supported by the Spanish MINECO under grants MAT2013-46308, MAT2016-75955, FIS2015-64654-P, FIS2013-48286-C02-01-P and FIS2016- 76617-P, by the Basque Government through the ELKARTEK project (SUPER) and the University of the Basque Country (Grant No. IT-756-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep insight into the electronic structure of ternary topological insulators: A comparative study of PbBi4Te7 and PbBi6Te10

  • Pacilè, Daniela
  • Eremeev, Sergey V.
  • Caputo, Marco
  • Pisarra, M.
  • De Luca, Oreste
  • Grimaldi, I.
  • Fujii, Jun
  • Aliev, Ziya S.
  • Babanly, Mahammad B.
  • Vobornik, Ivana
  • Agostino, Raffaele G.
  • Goldoni, Andrea
  • Chulkov, Eugene V.
  • Papagno, Marco
By means of angle-resolved photoemission spectroscopy measurements, the electronic band structure of the three-dimensional PbBiTe and PbBiTe topological insulators is compared. The measurements clearly reveal coexisting topological and multiple Rashba-like split states close to the Fermi level for both systems. The observed topological states derive from different surface terminations, as confirmed by scanning tunneling microscopy measurements, and are well-described by the density functional theory simulations. Both the topological and the Rashba-like states reveal a prevalent two-dimensional character barely affected by air exposure. X-ray and valence band photoemission measurements suggest Rashba-like states stem from the van der Waals gap expansion, consistently with density functional theory calculations., This work has been supported by the Progetto PON03PE 00092 1 (EOMAT), Ministero dell’Istruzione della Universitá e Ricerca (Italy), the Basque Country Government, Departamento de Educacion, Universidades e Investigacion (Grant No. IT-756-13), the Spanish Ministry of Science and Innovation (Grant Nos. FIS2010-19609-C02-01, FIS2013-48286-C02-02-P, and FIS2013-48286-C02-01-P), the Tomsk State University Academic D.I. Mendeleev Fund Program (Grant No. 8.1.05.2015), Saint Petersburg State University (project 15.61.202.2015), in the framework of the nanoscience foundry and fine analysis (NFFA-MIUR Italy, Progetti Internazionali) facility, and partially supported by the Russian Science Foundation (Project No. 18-12-00169)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron-phonon coupling and superconductivity in the (4/3)-monolayer of Pb on Si(111): Role of spin-orbit interaction

  • Sklyadneva, Irina Yu.
  • Heid, Rolf
  • Bohnen, Klaus-Peter
  • Echenique, Pedro M.
  • Chulkov, Eugene V.
The effect of spin-orbit coupling on the electron-phonon interaction in a (4/3)-monolayer of Pb on Si(111) is investigated within the density-functional theory and linear-response approach in the mixed-basis pseudopotential representation. We show that the spin-orbit interaction produces a large weakening of the electron-phonon coupling strength, which appears to be strongly overestimated in the scalar relativistic calculations. The effect of spin-orbit interaction is largely determined by the induced modification of Pb electronic bands and a stiffening of the low-energy part of phonon spectrum, which favor a weakening of the electron-phonon coupling strength. The state-dependent strength of the electron-phonon interaction in occupied Pb electronic bands varies depending on binding energy rather than electronic momentum. It is markedly larger than the value averaged over electron momentum because substrate electronic bands make a small contribution to the phonon-mediated scattering and agrees well with the experimental data., This work has been supported by the University of the Basque Country (Grants No. GIC07-IT-366-07 and No. IT756-13), the Spanish Ministry of Science and Innovation (Grants No. FIS2013-48286-C02-02-P, No. FIS2013-48286-C02-01-P, and No. FIS2016-75862-P), the Tomsk State University Academic D.I. Mendeleev Fund Program (Grant No. 8.1.01.2017) and Saint Petersburg State University (Project 15.61.202.2015)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron-phonon interaction in the 4/3-monolayer of Pb on Si(111): Theory versus He-atom scattering experiments

  • Sklyadneva, Irina Yu.
  • Benedek, Giorgio
  • Heid, Rolf
  • Echenique, Pedro M.
  • Toennies, J. P.
  • Chulkov, Eugene V.
The electron-phonon coupling parameter for a dense phase of a 4/3-monolayer of Pb on Si(111) is derived from the temperature dependence of He-atom scattering (HAS) reflectivity upon cooling from the high-temperature (1 × 1) to the low-temperature (3×3R30°) phase. The obtained value and the phonon dispersion curves of the Pb nanofilm measured with HAS are in excellent agreement with the first-principles calculations when the influence of the substrate and the interface on the interaction of electrons and phonons is taken into account. Consideration of this effect is obviously very important for such small thicknesses as a single Pb wetting layer. An overall strong coupling constant, λ = 0.84 ± 0.07, is found., This work has been supported by the University of the Basque Country (grants no. GIC07-IT-366-07 and no. IT-756-13), the Spanish Ministry of Science and Innovation (grants no. FIS2013-48286-C02-02-P, no. FIS2013-48286-C02-01-P, and no. FIS2016-75862-P), the Tomsk State University Academic D.I. Mendeleev Fund Program (grant no. 8.1.01.2017), and Saint Petersburg State University (project 15.61.202.2015)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magneto-spin−orbit graphene: Interplay between exchange and spin−orbit couplings

  • Rybkin, Artem G.
  • Rybkina, Anna A.
  • Otrokov, Mikhail M.
  • Vilkov, Oleg Yu.
  • Klimovskikh, Ilya I.
  • Petukhov, Anatoly E.
  • Filianina, Maria V.
  • Voroshnin, Vladimir Yu.
  • Rusinov, Igor P.
  • Ernst, Arthur
  • Arnau, Andrés
  • Chulkov, Eugene V.
  • Shikin, Alexander M.
A rich class of spintronics-relevant phenomena require implementation of robust magnetism and/or strong spin-orbit coupling (SOC) to graphene, but both properties are completely alien to it. Here, we for the first time experimentally demonstrate that a quasi-freestanding character, strong exchange splitting and giant SOC are perfectly achievable in graphene at once. Using angle- and spin-resolved photoemission spectroscopy, we show that the Dirac state in the Au-intercalated graphene on Co(0001) experiences giant splitting (up to 0.2 eV) while being by no means distorted due to interaction with the substrate. Our calculations, based on the density functional theory, reveal the splitting to stem from the combined action of the Co thin film in-plane exchange field and Au-induced Rashba SOC. Scanning tunneling microscopy data suggest that the peculiar reconstruction of the Au/Co(0001) interface is responsible for the exchange field transfer to graphene. The realization of this "magneto-spin-orbit" version of graphene opens new frontiers for both applied and fundamental studies using its unusual electronic bandstructure., The authors acknowledge support by the Saint Petersburg State University (Grant 15.61.202.2015), German-Russian Interdisciplinary Science Center (G-RISC) funded by the German Federal Foreign Office via the German Academic Exchange Service (DAAD) and Russian-German laboratory at BESSY II (Helmholtz-Zentrum Berlin). The funding by the University of the Basque Country (Grants GIC07IT36607 and IT-756-13), the Spanish Ministry of Science and Innovation (Grants FIS2013-48286-C02-02-P, FIS2013-48286-C02-01-P, and FIS2016-75862-P) and Tomsk State University competitiveness improvement programme (Project No. 8.1.01.2017) is also gratefully acknowledged. I.P.R. acknowledges support by the Ministry of Education and Science of the Russian Federation within the framework of the governmental program “Megagrants” (state task no. 3.8895.2017/P220)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New universal type of interface in the magnetic insulator/topological insulator heterostructures

  • Eremeev, Sergey V.
  • Otrokov, Mikhail M.
  • Chulkov, Eugene V.
Magnetic proximity effect at the interface between magnetic and topological insulators (MIs and TIs) is considered to have great potential in spintronics as, in principle, it allows realizing the quantum anomalous Hall and topological magneto-electric effects (QAHE and TME). Although an out-of-plane magnetization induced in a TI by the proximity effect was successfully probed in experiments, first-principles calculations reveal that a strong electrostatic potential mismatch at abrupt MI/TI interfaces creates harmful trivial states rendering both the QAHE and TME unfeasible in practice. Here on the basis of recent progress in formation of planar self-assembled single layer MI/TI heterostructure (T. Hirahara et al. Nano Lett. 2017 , 17 , 3493 - 3500 ), we propose a conceptually new type of the MI/TI interfaces by means of density functional theory calculations. By considering MnSe/Bi2Se3, MnTe/Bi2Te3, and EuS/Bi2Se3 we demonstrate that, instead of a sharp MI/TI interface clearly separating the two subsystems, it is energetically far more favorable to form a built-in interface via insertion of the MI film inside the TI's surface quintuple layer (e.g., Se-Bi-Se-[MnSe]-Bi-Se) where it forms a bulk-like MI structure. This results in a smooth MI-to-TI connection that yields the interface electronic structure essentially free of trivial states. Our findings open a new direction in studies of the MI/TI interfaces and restore their potential for the QAHE and TME observation., We acknowledge the Basque Country Government, Departamento de Educación, Universidades e Investigación (Grant No. IT-756-13), the Spanish Ministry of Science and Innovation (Grant Nos. FIS2010-19609-C02-01, FIS2013-48286-C02-02-P, No. FIS2016-75862-P, and FIS2013-48286-C02-01-P), Academic D.I. Mendeleev Fund Program of Tomsk State University (Project No. 8.1.01.2018), and Saint Petersburg State University (project 15.61.202.2015). S.V.E. acknowledges support by the Fundamental Research Program of the State Academies of Sciences for 2013–2020, line of research III.23., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phonon-induced linewidth of quantum-well states in monolayer Pb on Si(111)

  • Sklyadneva, Irina Yu.
  • Heid, Rolf
  • Bohnen, Klaus-Peter
  • Chulkov, Eugene V.
We report a study of the electron–phonon contribution to the linewidth of quantum-well states in a surface superstructure formed by a 4/3-monolayer of Pb on Si(111), a dense phase with a √3 ×√3 unit cell. Ab initio calculations based on the density-functional theory were carried out using a linear response approach in the mixed-basis pseudopotential representation. The phonon-induced contribution to the lifetime broadening is analyzed for both excited electrons and holes. The phonon contribution is found to be generally very sensitive to the energy position of the excited electron (hole) except for unoccupied Pb electronic states inside the Si band gap where the phonon-induced linewidth varies smoothly around  ∼ 13 meV irrespective of electron energy. This differs for occupied Pb electronic states, which exhibit larger linewidths, or shorter lifetimes, because numerous phonon-mediated transitions to Si electronic bands substantially increase the electron–phonon coupling., This work has been supported by University of the Basque Country (grants nos. GIC07IT36607 and IT-756-13), the Spanish Ministry of Science and Innovation (grants nos. FIS2013-48286-C02-02-P, FIS2013-48286-C02-01-P, and FIS2016-75862-P), the Tomsk State University Academic D.I. Mendeleev Fund Program (grant no. 8.1.05.2015) and Saint Petersburg State University (project 15.61.202.2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-coverage surface diffusion in complex periodic energy landscapes: Analytical solution for systems with symmetric hops and application to intercalation in topological insulators

  • Gosálvez, M. A.
  • Otrokov, Mikhail M.
  • Ferrando, Néstor
  • Ryabishchenkova, A. G.
  • Ayuela, Andrés
  • Echenique, Pedro M.
  • Chulkov, Eugene V.
This is the first of two papers that introduce a general expression for the tracer diffusivity in complex, periodic energy landscapes with M distinct hop rates in one-, two-, and three-dimensional diluted systems (low-coverage, single-tracer limit). The present report focuses on the analysis of diffusion in systems where the end sites of the hops are located symmetrically with respect to the hop origins (symmetric hops), as encountered in many ideal surfaces and bulk materials. For diffusion in two dimensions, a number of formulas are presented for complex combinations of the different hops in systems with triangular, rectangular, and square symmetry. The formulas provide values in excellent agreement with kinetic Monte Carlo simulations, concluding that the diffusion coefficient can be directly determined from the proposed expressions without performing the simulations. Based on the diffusion barriers obtained from first-principles calculations and a physically meaningful estimate of the attempt frequencies, the proposed formulas are used to analyze the diffusion of Cu, Ag, and Rb adatoms on the surface and within the van der Waals (vdW) gap of a model topological insulator, Bi2Se3. Considering the possibility of adsorbate intercalation from the terraces to the vdW gaps at morphological steps, we infer that, at low coverage and room temperature, (i) a majority of the Rb atoms bounce back at the steps and remain on the terraces, (ii) Cu atoms mostly intercalate into the vdW gap, the remaining fraction staying at the steps, and (iii) Ag atoms essentially accumulate at the steps and gradually intercalate into the vdW gap. These conclusions are in good qualitative agreement with previous experiments. The companion report (M. A. Gosálvez et al., Phys. Rev. B, submitted] extends the present study to the description of systems that contain asymmetric hops., We acknowledge support from the Ramon y Cajal Fellowship Program of the Spanish Ministry of Science and Innovation (M. A. Gosalvez), the JAE-Doc grant from the Junta para la Ampliacion de Estudios program cofunded by FSE (N. Ferrando), the University of the Basque Country (Grant No. GIC07IT36607), the Spanish Ministry of Science and Innovation (Grant Nos. FIS2013-48286-C02-02-P and FIS2013-48286-C02-01-P), the Basque Government through the Nanomaterials project under the nanoGUNE2014 program (Grant No. IE05-151), the Tomsk State University Academic D. I. Mendeleev Fund Program in 2015 (Research Grant No. 8.1.05.2015), and partial support from Saint Petersburg State University (Project No. 15.61.202.2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-coverage surface diffusion in complex periodic energy landscapes. II. Analytical solution for systems with asymmetric hops

  • Gosálvez, M. A.
  • Otrokov, Mikhail M.
  • Ferrando, Néstor
  • Ryabishchenkova, A. G.
  • Ayuela, Andrés
  • Echenique, Pedro M.
  • Chulkov, Eugene V.
This is part II in a series of two papers that introduce a general expression for the tracer diffusivity in complex, periodic energy landscapes with M distinct hop rates in one-, two-, and three-dimensional diluted systems (low coverage, single-tracer limit). While Part I [Gosálvez et al., Phys. Rev. B 93, 075429 (2016)] focuses on the analysis of diffusion in systems where the end sites of the hops are located symmetrically with respect to the hop origins (symmetric hops), as encountered in many ideal surfaces and bulk materials, this report (Part II) presents a more general approach to determining the tracer diffusivity in systems where the end sites can be located asymmetrically with respect to the hop origins (asymmetric hops), as observed in reconstructed and/or chemically modified surfaces and/or bulk materials. The obtained diffusivity formulas for numerous systems are validated against kinetic Monte Carlo simulations and previously reported analytical expressions based on the continuous-time random walk (CTRW) method. The proposed method corrects some of the CTRW formulas and provides new expressions for difficult cases that have not been solved earlier. This demonstrates the ability of the proposed formalism to describe tracer diffusion., We acknowledge support from the Ramon y Cajal Fellowship Program of the Spanish Ministry of Science and Innovation (M. A. Gosalvez), the JAE-Doc grant from the Junta para la Ampliacion de Estudios program cofunded by FSE (N. Ferrando), the University of the Basque Country (Grant No. GIC07IT36607), the Spanish Ministry of Science and Innovation (Grants No. FIS2013-48286-C02-02-P and No. FIS2013-48286-C02-01-P), the Basque Government through the Nanomaterials project under the nanoGUNE2014 program (Grant No. IE05-151), the Tomsk State University Academic D. I. Mendeleev Fund Program in 2015 (Research Grant No. 8.1.05.2015), and partial support from Saint Petersburg State University (Project No. 15.61.202.2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature-driven topological quantum phase transitions in a phase-change material Ge2Sb2Te5

  • Eremeev, Sergey V.
  • Rusinov, Igor P.
  • Echenique, Pedro M.
  • Chulkov, Eugene V.
The Ge2Sb2Te5 is a phase-change material widely used in optical memory devices and is a leading candidate for next generation non-volatile random access memory devices which are key elements of various electronics and portable systems. Despite the compound is under intense investigation its electronic structure is currently not fully understood. The present work sheds new light on the electronic structure of the Ge2Sb2Te5 crystalline phases. We demonstrate by predicting from first-principles calculations that stable crystal structures of Ge2Sb2Te5 possess different topological quantum phases: a topological insulator phase is realized in low-temperature structure and Weyl semimetal phase is a characteristic of the high-temperature structure. Since the structural phase transitions are caused by the temperature the switching between different topologically non-trivial phases can be driven by variation of the temperature. The obtained results reveal the rich physics of the Ge2Sb2Te5 compound and open previously unexplored possibility for spintronics applications of this material, substantially expanding its application potential., We acknowledge partial support from the Basque Country Government, Departamento de Educación, Universidades e Investigación (Grant No. IT-756-13), the Spanish Ministerio de Ciencia e Innovación (Grants No. FIS2013-48286-C02-01-P and FIS2013-48286-C02-02-P), the Tomsk State University Academic D.I. Mendeleev Fund Program (Grant No. 8.1.05.2015), and Saint Petersburg State University (Grant No. 15.61.202.2015). Calculations were partly performed using computational resources provided by Resource Center “Computer Center of SPbU” (http://cc.spbu.ru) and the SKIF-Cyberia supercomputer at the National Research Tomsk State University., Peer reviewed