Pasar al contenido principal

MODELIZACION, FABRICACION Y CARACTERIZACION DE NUEVOS DISPOSITIVOS FOTONICOS GENERADOS MEDIANTE ARQUITECTURAS HIBRIDAS OPTICO-DIGITALES

FIS2014-56100-C2-1-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DE ALICANTE
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of holographic polymer-dispersed liquid crystals (HPDLCs) for tunable low frequency diffractive optical elements recording

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holographic polymer dispersed liquid crystals (HPDLCs) are the result of the optimization of the photopolymer fabrication techniques. They are made by recording in a photopolymerization induced phase separation process (PIPS) in which the liquid crystal molecules diffuse to dark zones in the diffraction grating originated. Thanks to the addition of liquid crystal molecules to the composition, this material has a dynamic behavior by reorientation of the liquid crystal molecules applying an electrical field. In this sense, it is possible to use this material to make dynamic devices. In this work, we study the behavior of this material working in low frequencies with different spatial periods of blazed gratings, a sharp profile whose recording is possible thanks to the addition of a Holoeye LCoS-Pluto spatial light modulator with a resolution of 1920 × 1080 pixels (HD) and a pixel size of 8 × 8 μm2. This device allows us to have an accurate and dynamic control of the phase and amplitude of the recording beam.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Blazed Gratings Recorded in Absorbent Photopolymers

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Phase diffractive optical elements, which have many interesting applications, are usually fabricated using a photoresist. In this paper, they were made using a hybrid optic-digital system and a photopolymer as recording medium. We analyzed the characteristics of the input and recording light and then simulated the generation of blazed gratings with different spatial periods in different types of photopolymers using a diffusion model. Finally, we analyzed the output and diffraction efficiencies of the 0 and 1st order so as to compare the simulated values with those measured experimentally. We evaluated the effects of index matching in a standard PVA/AA photopolymer, and in a variation of Biophotopol, a more biocompatible photopolymer. Diffraction efficiencies near 70%, for a wavelength of 633 nm, were achieved for periods longer than 300 µm in this kind of materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of the spatial frequency on the diffractive optical elements fabrication in PDLCs

  • Fernandez, Roberto
  • Fenoll Gambín, Sandra
  • Gallego, Sergi
  • Márquez, Andrés
  • Francés, Jorge
  • Navarro-Fuster, Víctor
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers are classical holographic recording materials. Recently their chemical composition and the fabrication techniques have been optimized for many new applications such as interconnectors, solar concentrations, 2-D photonic structures, or wave-guides. Their potential usefulness has been drastically increased by the introduction of dispersed liquid crystal molecules; these components can be concentrated in the non-exposed zones of the material by a photopolymerization induced phase separation process (PIPS). Therefore, by combining polymer and dispersed liquid crystal (PDLC) has emerged as a new composite material for switchable diffractive optical elements (DOEs). Parallel to the material advances some techniques have been proposed to record very low spatial frequencies DOE’s. Different researchers have reported proposes to record DOE like fork gratings, photonics structures, lenses, sinusoidal, blazed or fork gratings. In this work we have studied the behavior of a PDLC material to record DOE’s with different spatial periods: from 1 μm, using holographic technique, to more than 200 μm, Liquid Cristal on Silicon (LCoS) display working in mostly amplitude mode as a master. Due to the improvement in the spatial light modulation technology and the pixel miniaturization, this technique permits us store gratings with spatial frequencies until few microns. Additionally, this technology permits us an accurate and dynamic control of the phase and the amplitude of the recording beam. In particular, for our case, to generate the blazed gratings, we use an LCoS-Pluto provided by Holoeye with a resolution of 1920x1080 (HDTV) pixels and a pixel size of 7.7x7.7 m2.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Caracterización de lentes holográficas registradas en un fotopolímero compatible con el medio ambiente, Characterization of registered holographic lenses in a photopolymer compatible with the environment

  • Lloret, Tomás
  • Navarro-Fuster, Víctor
  • Ramirez, Manuel G.
  • Neipp, Cristian
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Lloret, Tomás|||/items/21981029-b54d-44b2-87a1-a134245d1805
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Ramirez, Manuel G.|||/items/12f013ca-97ed-4a98-a4d4-44590163cb82
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
En este trabajo se presenta un dispositivo para obtener lentes holográficas (LH) en un fotopolímero compatible medioambientalmente sensibilizado a la longitud de onda de 488 nm. Utilizando este dispositivo se han obtenido LH's, reconstruidas con dos láseres 473 nm y 633 nm), de la misma focal y diámetro, con montajes experimentales simétricos y asimétricos, y positivas y negativas. La calidad de imagen de dichas lentes se ha evaluado: experimentalmente; a partir del cálculo de la MTF y las aberraciones obtenidas capturando con un sensor CCD la imagen del foco (PSF), y teóricamente; mediante software. También se propone un método para mejorar la calidad de imagen de las LH's que tienen más aberraciones.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Efficient split eld FDTD analysis of third-order nonlinear materials in two-dimensionally periodic media

  • Francés, Jorge
  • Bleda, Sergio
  • Bej, Subhajit
  • Tervo, Jani
  • Navarro-Fuster, Víctor
  • Fenoll Gambín, Sandra
  • Martínez Guardiola, Francisco Javier
  • Neipp, Cristian
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
In this work the split-field finite-difference time-domain method (SF-FDTD) has been extended for the analysis of two-dimensionally periodic structures with third-order nonlinear media. The accuracy of the method is verified by comparisons with the nonlinear Fourier Modal Method (FMM). Once the formalism has been validated, examples of one- and two-dimensional nonlinear gratings are analysed. Regarding the 2D case, the shifting in resonant waveguides is corroborated. Here, not only the scalar Kerr effect is considered, the tensorial nature of the third-order nonlinear susceptibility is also included. The consideration of nonlinear materials in this kind of devices permits to design tunable devices such as variable band filters. However, the third-order nonlinear susceptibility is usually small and high intensities are needed in order to trigger the nonlinear effect. Here, a one-dimensional CBG is analysed in both linear and nonlinear regime and the shifting of the resonance peaks in both TE and TM are achieved numerically. The application of a numerical method based on the finite- difference time-domain method permits to analyse this issue from the time domain, thus bistability curves are also computed by means of the numerical method. These curves show how the nonlinear effect modifies the properties of the structure as a function of variable input pump field. When taking the nonlinear behaviour into account, the estimation of the electric field components becomes more challenging. In this paper, we present a set of acceleration strategies based on parallel software and hardware solutions.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Effective modeling of PA-LCoS devices and application in data storage in photopolymers

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Gallego, Sergi
  • Fenoll Gambín, Sandra
  • Ortuño, Manuel
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Parallel aligned liquid crystal on silicon (PA-LCoS) devices are widely used in many optics and photonics applications to control the amplitude, phase and/or state of polarization (SOP) of light beams. We present a novel model enabling to calculate the voltage dependent retardance provided by PA-LCoS devices for a very wide range of incidence angles and any wavelength in the visible. To our knowledge it represents the most simplified approach still showing predictive capability. We are particularly interested in the application of PA-LCoS microdisplays as the data pager in holographic data storage systems (HDSS). In this work we show both theoretical and experimental results addressing hybrid-ternary modulated (HTM) data pages and using our in-house produced PVA/AA photopolymer as the storage material. We demonstrate that PA-LCoS devices cannot implement pure HTM but a rather close approximation. Experimental results with PVA/AA show bit-error rates (BER) in the range of the threshold for potential application in HDSS (about 10−3).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polymerizable Materials for Diffractive Optical Elements Recording

  • Fernandez, Roberto
  • Navarro-Fuster, Víctor
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The technologies based on holographic and photonic techniques related to the optical storage and optical processing of information are rapidly evolving. One of the key points of this evolution are the new recording materials able to perform under the most specific situations and applications. In this sense, the importance of the photopolymers is growing spectacularly. This is mainly due to their versatility in terms of composition and design together with other interesting properties such as self-processing capabilities. In this chapter, we introduce the diffractive optical elements (DOE) generation in these materials and some of the most important parameters involved in this process. The deep knowledge of the material is essential to model its behavior during and after the recording process and we present different techniques to characterize the recording materials. We also present a 3D theoretical diffusion model able to reproduce and predict the experimental behavior of the recording process of any kind of DOE onto the photopolymers. The theoretical results will be supported by experimental analysis using a hybrid optical-digital setup, which includes a liquid crystal on silicon display. Besides this analysis, we study a method to improve the conservation and characteristics of these materials, an index-matching system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

La llum que ens envolta

  • Beléndez, Augusto
  • Beléndez, Augusto
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
El 20 de desembre de 2013, l'Assemblea General de les Nacions Unides en la seua resolució nº 68, "reconeixent la importància de la llum i les tecnologies basades en la llum per a la vida dels ciutadans del món i per al desenvolupament futur de la societat mundial en molts nivells", va proclamar el 2015 «Any Internacional de la Llum i de les Tecnologies Basades en la Llum» per a fer palès el paper fonamental que exerceix la llum i les seues tecnologies en totes les activitats humanes. La llum és a l'origen de la vida, ha inspirat la bellesa, pintors, poetes, arquitectes, i és essencial en fotografia, cinema, teatre o televisió, perquè no hi ha dubte que afecta la resposta emocional de l'audiència. N'hi ha prou amb mirar al nostre voltant per a comprovar que les nombroses aplicacions de la llum han revolucionat la societat a través de la ciència, l'enginyeria, l'arquitectura, la medicina, les comunicacions, la cultura, l'art i fins i tot l'oci.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Shrinkage measurament for holographic recording materials

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Francés, Jorge
  • Navarro-Fuster, Víctor
  • Neipp, Cristian
  • Ortuño, Manuel
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
There is an increasing demand for new holographic recording materials. One of them are photopolymers, which are becoming a classic media in this field. Their versatility is well known and new possibilities are being created by including new components, such as nanoparticles or dispersed liquid crystal molecules in classical formulations, making them interesting for additional applications in which the thin film preparation and the structural modification have a fundamental importance. Prior to obtaining a wide commercialization of displays based on photopolymers, one of the key aspects is to achieve a complete characterization of them. In this sense, one of the main parameters to estimate and control is the shrinkage of these materials. The volume variations change the angular response of the hologram in two aspects, the angular selectivity and the maximum diffraction efficiency. One criteria for the recording material to be used in a holographic data storage application is the shrinkage, maximum of 0.5%. Along this work, we compare two different methods to measure the holographic recording material shrinkage. The first one is measuring the angle of propagation for both diffracted orders ±1 when slanted gratings are recorded, so that an accurate value of the grating vector can be calculated. The second one is based on interference measurements at zero spatial frequency limit. We calculate the shrinkage for three different photopolymers: a polyvinyl alcohol acrylamide (PVA/AA) based photopolymer, one of the greenest photopolymers whose patent belongs to the Alicante University called Biophotopol and on the last place a holographic-dispersed liquid crystal photopolymer (H-PDLC).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of holographic data storage using a PA-LCoS device

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Fenoll Gambín, Sandra
  • Ortuño, Manuel
  • Francés, Jorge
  • Bleda, Sergio
  • Pascual, Inmaculada
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Holographic data storage systems (HDSS) have been a promising and very appealing technology since the first laser developments in the sixties. Impact of ongoing advances in the various components needs to be explored in its specific application to HDSS. In this sense, continuous progress is being produced in spatial light modulator (SLM) technology where parallel-addressed liquid crystal on silicon (PA-LCoS) microdisplays have replaced previous liquid-crystal displays (LCD) in most of optics and photonics applications. PA-LCoS microdisplays are well adapted to display phaseonly elements without coupled amplitude. In this paper, we analyse how PA-LCoS devices can also be used to display the widely applied binary intensity modulated (BIM) data pages. We also investigate hybrid-ternary modulated (HTM) data pages, which are very much demanding on the phase and amplitude modulation properties of an SLM. HTM data pages combine the ease of detection of BIM data pages, together with a large reduction of the DC term of the Fourier Transform of the data page. This reduction is necessary to avoid saturation of the recording material dynamic range. Simulated results show the magnitude of the expected DC term in the Fourier plane. We have verified the good performance of PA-LCoS to display BIM data pages. We have also obtained that pure HTM data pages cannot be produced with PA-LCoS devices, however, a rather close performance is obtained when implementing the pseudo-HTM data pages. In this work a more complete study of pseudo-HTM modulation is offered.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Finite-difference analysis of high demanding computational problems in optical periodic nonlinear media

  • Francés, Jorge
  • Bleda, Sergio
  • Gallego, Sergi
  • Fernandez, Roberto
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Márquez, Andrés
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
The application of nonlinear materials in photonic crystals and periodic optical media in general has been extensively investigated in literature but currently numerical simulation, which is necessary in the design of sophisticated photonics devices, is very challenging. The Split-Field Finite-Difference Time-Domain (SF- FDTD) approach is a formulation of FDTD that is specially tailored to efficiently incorporate the periodicity in the algorithm and provides a natural framework for simulating periodic optical media under oblique angle of incidence. Here, this formalism has been adapted for covering second- and third- order nonlinear materials with a tensorial formulation of both nonlinear susceptibilities. Even the method only considers a single period of the structure, the addition of nonlinear materials sets some issues that must be addressed. Firstly, the nonlinear dependence of the electromagnetic field, which is included due to the nonlinear polarization term, must be solved in each time step by means of an additional fixed-point iterative process. Hence, the computational intensity of the method is dramatically affected. Secondly, considering the tensorial behaviour of the second and third-order nonlinear susceptibilities establishes a challenge in terms of computational resources. In order to avoid these drawbacks, High- Performance Computing (HPC) solutions based on GPU and Intel Xeon Phi have been considered. The SF-FDTD method here presented gives the possibility of accurately analyse phenomena such as the second harmonic generation in second-order nonlinear materials, shifting of resonances in resonant gratings due to Kerr effect, bistability effects and all- optical behaviour in two-dimensionally binary gratings with nonlinear material filling the pillars.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Diffractive lenses recorded in absorbent photopolymers

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Francés, Jorge
  • Navarro-Fuster, Víctor
  • Pascual, Inmaculada
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Photopolymers can be appealing materials for diffractive optical elements fabrication. In this paper, we present the recording of diffractive lenses in PVA/AA (Polyvinyl alcohol acrylamide) based photopolymers using a liquid crystal device as a master. In addition, we study the viability of using a diffusion model to simulate the lens formation in the material and to study the influence of the different parameters that govern the diffractive formation in photopolymers. Once we control the influence of each parameter, we can fit an optimum recording schedule to record each different diffractive optical element with the optimum focalization power.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Año Internacional de la Luz y de las Tecnologías basadas en la Luz, The International Year of Light and Light Based Technologies, Any Internacional de la Llum i de les Tecnologies Basades en la Llum

  • Beléndez, Augusto
  • Beléndez, Augusto
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
El 20 de diciembre de 2013 la Asamblea General de las Naciones Unidas en su resolución nº 68, "reconociendo la importancia de la luz y las tecnologías basadas en la luz para la vida de los ciudadanos del mundo y para el desarrollo futuro de la sociedad mundial en muchos niveles", proclamó 2015 como «Año Internacional de la Luz y de las Tecnologías basadas en la Luz» para poner de manifiesto el papel fundamental que desempeñan la luz y sus tecnologías en todas las actividades humanas. La luz se encuentra en el origen de la vida, ha inspirado la belleza, a pintores, poetas, arquitectos, etc. y es esencial en fotografía, cine, teatro o televisión, pues no cabe duda que afecta a la respuesta emocional de la audiencia. Basta mirar a nuestro alrededor para comprobar que las numerosas aplicaciones de la luz han revolucionado la sociedad a través de la ciencia, la ingeniería, la arquitectura, la medicina, las comunicaciones, la cultura, el arte y el ocio. Las tecnologías basadas en la luz también aportan nuevas soluciones a los problemas mundiales en campos como la energía, la educación, la agricultura, el medioambiente y la sanidad.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Visualization of stokes parameters with the help of rotating–waveplate polarimeter and a liquid crystal on silicon microdisplay

  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Márquez, Andrés
  • Alvarez, Mariela L.
  • Francés, Jorge
  • Gallego, Sergi
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
Mueller-Stokes formalism enable us to deal with polarized and unpolarized light. This formalism is hard to understand by the students because it is a new introduced concept and less intuitive than the Jones formalism. Because of that, we have designed some experiences that help students to understand and see how the Stokes parameters vary in real time. We use two commercially available optoelectronic devices. They are a Rotating Waveplate polarimeter and a Parallel Aligned Liquid Crystal on Silicon (PA-LCoS) microdisplay. The PA-LCoS acts as a variable linear retarder controlled by voltage, and the polarimeter allows us to measure the Stokes parameters in real time, and it shows the representation in the Poincaré Sphere, that it is the most intuitive representation for the Stokes parameters. Apart from the Stokes parameters, we can also use these experiences to introduce the students in a research laboratory, adding some knowledge about using LabView to automate experiments. In addition, we can use these devices and the measurements related to the light polarization to remark some basics concepts about the optical processing of information and the Fourier Transform. These experiences are suitable for different subjects, such as "Fundamentals of Engineering Optics", basic subject included in the second course of the Degree in Telecommunication, for "Photonic Devices and Optoelectronics" mandatory subject taught during the second year of the Master in Telecommunication, or the optative subject “Optical Image Acquisition and Processing” from the Master in Automation and Robotics in the University of Alicante too.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Diffractive lenses in biocompatible photopolymers using LCoS

  • Fernandez, Roberto
  • Gallego, Sergi
  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Márquez, Andrés
  • Neipp, Cristian
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The improving of the technology related to the Spatial Light Modulators (SLM), which can be used to modulate the wavefront of a light beam in many different applications in Optics and Photonics, has widespread their use in many new ways. In particular, the continue miniaturization of the pixel size let them be used as a master for Diffractive Optical Elements(DOE) recording applications. One of these displays isthe parallel-addressed liquid crystal on silicon (PA-LCoS) microdisplay, which offers easily the possibility of phase-only modulation without coupled amplitude modulation, but can be use also as an amplitude master just rotating the angles of two polarizers. Together with the DOEs, the optic recording material is also one of the crucial componentsin the system. Photoresist has been used classically for this purpose. Recently some works provide results of the incorporation of photopolymers, initially used for holographic recording, to fabricate DOEs. Among photopolymers, polyvinil alcohol/acrylamide (PVA/AA) materials have been studied firstly due to the accurate control of their optical properties and the ease of fabrication. Nevertheless, this kind of photopolymer presents a high level of toxicity due mainly to the monomer, acrylamide. In this sense, we made efforts to search alternative “green” photopolymers, one of these is called “Biophotopol”. This material presents good optical properties; although, it has two principal drawbacks: its refractive index modulation is lower than the PVA/AA one and the dye used presents very low absorption at 532 nm. In order to solve these problems for recording spherical diffractive lenses, in the present work we have explored different possibilities. On the first place, we have modified the fabrication technique of the solid layer to achieve thicker samples, on the second place, we have introduced a biocompatible crosslinker monomer. These two actions provide us a higher value of the phase modulation capability. On the third place, we have modified the dye to record DOE’s with the wavelength of 532 nm and obtain a direct comparison with the results obtained with PVA/AA materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Computational split-field finite-difference time-domain evaluation of simplified tilt-angle models for parallel-aligned liquid-crystal devices

  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Simplified analytical models with predictive capability enable simpler and faster optimization of the performance in applications of complex photonic devices. We recently demonstrated the most simplified analytical model still showing predictive capability for parallel aligned liquid crystal on silicon devices (PA-LCoS), which provides the voltage dependent retardance for a very wide range of incidence angles and any wavelength in the visible. In this work we further show that the proposed model is not only phenomenological but it is also physically meaningful, since two of its parameters provide the correct values for important internal properties of these devices related with the birefringence, cell gap and director profile. Therefore, the proposed model can be used as a means to inspect internal physical properties of the cell. Also as a novelty, we also show the applicability of the split-field finite difference time domain (SF-FDTD) technique for phase-shift and retardance evaluation of PA-LCoS devices under oblique incidence. As simplified model for PA-LCoS devices we also consider the exact description of homogeneous birefringent slabs. However, we show that despite its higher degree of simplification the proposed model is more robust, providing unambiguous and physically meaningful solutions when fitting its parameters.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Cylindrical diffractive lenses recorded on PVA/AA photopolymers

  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Navarro-Fuster, Víctor
  • Francés, Jorge
  • Neipp, Cristian
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers are optical recording materials appealing for many different applications such as holography, data storage, interconnectors, solar concentrations, or wave-guides fabrication. Recently the capacity of photopolymers to record diffractive optical elements (DOE’s) has been investigated. Different authors have reported proposes to record DOE like fork gratings, photonics structures, lenses, sinusoidal, blazed or fork gratings. In these experiments there are different experimental set-ups and different photopolymers. In this work due to the improvement in the spatial light modulation technology together with the photopolymer science we propose a recording experimental system of DOE using a Liquid Cristal based on Silicon (LCoS) display as a master to store complex DOE like cylindrical lenses. This technology permits us an accurate control of the phase and the amplitude of the recording beam, with a very small pixel size. The main advantage of this display is that permit us to modify the DOE automatically, we use the software of the LCoS to send the voltage to each pixel In this work we use a photopolymer composed by acrylamide (AA) as polymerizable monomer and polyvinyl alcohol (PVA). We use a coverplated and index matched photopolymer to avoid the influence of the thickness variation on the transmitted light. In order to reproduce the material behaviour during polymerization, we have designed our model to simulate cylindrical lenses and used Fresnel propagation to simulate the light propagation through the DOE and analyze the focal plane and the properties of the recorded lenses.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Dimensional changes in slanted diffraction gratings recorded in photopolymers

  • Fernandez, Roberto
  • Gallego, Sergi
  • Navarro-Fuster, Víctor
  • Neipp, Cristian
  • Francés, Jorge
  • Fenoll Gambín, Sandra
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Photopolymers are appealing materials for many optical applications. For most of them, shrinkage plays an important role in the final properties of the display, especially in holographic data storage applications. In this paper, we demonstrate that to quantify correctly the shrinkage, it is mandatory to measure the angle of propagation for both diffracted orders ± 1, so that an accurate value of the grating vector can be calculated. Experimental evidence from three different photopolymers supports this affirmation. Firstly, polyvinyl alcohol acrylamide based photopolymer, which has been studied by many research groups; secondly, one environmentally compatible photopolymer developed by our group; and thirdly, a photopolymer with dispersed liquid crystal molecules. We studied the deviation from the sinusoidal profile analyzing the higher diffracted orders.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Peristrophic multiplexed holograms recorded in a low toxicity photopolymer

  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Multiplexed diffraction gratings were recorded in 300 μm thick layers of biophotopol photopolymer by using two peristrophic multiplexing schemes separately and in combination. In addition, it was shown that riboflavin may be used as polymer initiator in acrylamide photopolymer films and the holographic properties of these films such as diffraction efficiency and dynamic range were compared with those of the biophotopol photopolymer. A variable exposure scheduling method was adopted to store the gratings using a 488 nm Ar laser. Thirteen nearly uniform sinusoidal wave gratings could be recorded in a low toxicity recording medium with a variable exposure energy scheduling method. The diffraction efficiency and dynamic range obtained using the two multiplexing schemes were compared.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Generation of diffractive optical elements onto photopolymer using liquid crystal on silicon displays

  • Fernandez, Roberto
  • Gallego, Sergi
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In recent years, the optical storage and optical information processing technologies based on holographic and photonic techniques are suffering a huge improvement. On the other hand, Spatial Light Modulators (SLMs) based on LCoS microdisplays (PA-LCoS) open new possibilities to modulate the wavefront of a light beam. PA-LCoS are high resolution reflective devices which make possible the generation of Diffractive Optical Elements (DOE) with many important applications in photonics, communications of optical information processing, whenever it exists the possibility to have a recording material with the optimum characteristics for each application. Recently it is being explored the incorporation of photopolymers, initially used for holographic recording and data storage applications, to fabricate DOEs. Working with a setup based on a LCoS display as a master, we can store complex DOE, such as blazed gratings or diffractive lenses onto the photopolymers. We used a coverplating and index matching system on the material to avoid the influence of the thickness variation on the transmitted light.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Biophotopol’s energetic sensitivity improved in 300 μm layers by tuning the recording wavelength

  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
In order to obtain a highly environmentally compatible photopolymer to replace the well-known acrylamide photopolymer we optimized the previously developed Biophotopol composition to obtain volume transmission gratings in 300 μm layers, at a recording wavelength of 488 nm. The results obtained show an improved energetic sensitivity with similar diffraction efficiency to that obtained at the standard recording wavelength of 514 nm.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Metrology experiments to understand wave phase and diffractive concepts

  • Fernandez, Roberto
  • Martínez Guardiola, Francisco Javier
  • Ortuño, Manuel
  • Neipp, Cristian
  • Calzado Estepa, Eva María
  • Gallego, Sergi
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The concept of phase, introduced on the study of the Diffractive Optical Elements (DOEs), presents slight understanding difficulties by the students. The phase DOEs are obtained by variations of the thickness or the refractive index of the recording medium, as opposition to the amplitude DOEs, which are obtained by the modulation of the absorption of the recording medium. It is presented some experiences to introduce the phase concept by means of thickness and refractive index variation, using photopolymers as the phase recording media. The photopolymers are non-expensive material, easy to fabricate and they present good optical quality. As photopolymers are a phase recording material, when they are illuminated with light of the wavelength at which they are sensitive, the refractive index and/or the thickness of the illuminated areas change. The experiments consist in a zero-spatial frequency limit analysis, based on a reflection and transmission interferometer, and the recording of low spatial frequency DOEs. With the first experiments, it is possible to observe the phase shift between the exposed and non-exposed areas. This phase shift, observable by a CCD camera in the form of moving fringes, permits the measurement of the thickness and refractive index variations of the material. The second experiment consists in the recording of different types of DOEs, such as sinusoidal gratings, binary gratings or blazed gratings, generated using a Spatial Light modulator (SLM) to modulate the recording beam. This experiment, apart from the study of the changes produced by the variations of the thickness and the refractive index, is very useful to analyse and compare the diffraction efficiencies (DEs) of different types of grating. The experiences proposed are suitable for the students of different subjects such as "Optical fundamental for Engineering", basic subject included in the second course for obtaining a Telecommunication Degree, for "Photonics and Optoelectronic devices" mandatory subject taught during the second year of Telecommunication master or the optative subject “Acquisition and Optical Treatment of Images” from the Master in robotics-automatic all taught at the University of Alicante. In all cases, the experiences are not only very useful to introduce the concepts to study, but also are useful also to introduce the students into the work of a research laboratory and some of the equipment and procedures that are used on it.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multipurpose semi-physical model for parallel aligned liquid crystal devices

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Francés, Jorge
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Multiplexed holograms recorded in a low toxicity Biophotopol photopolymer

  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Gallego, Sergi
  • Fernandez, Roberto
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
Multiplexed diffraction gratings were recorded in 300 μm thick layers of Biophotopol photopolymer by using peristrophic multiplexing schema. Thirteen sinusoidal phase gratings were stored in a low toxicity recording medium. The diffraction efficiency conservation of the multiplexed diffraction efficiency obtained was studied along the time.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Holographic Data Storage Using Parallel-Aligned Liquid Crystal on Silicon Displays

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Fernandez, Roberto
  • Francés, Jorge
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The parallel-aligned liquid crystal on silicon (PA-LCoS) microdisplay has become a widely used device for the photonics community. It is a very versatile tool that can perform several tasks which transforms it into a key element in many different photonics applications. Since our group is interested in holography, in this chapter, we want to use these displays as the data entry point for a holographic data storage system (HDSS). Due to the novelty of this kind of device, we have done an intense work characterizing it. These efforts are reflected in this chapter where the reader will find two different characterization methods that will enable to predict the performance of the device in a specific application. Additionally, we present how a phase-only device can be used as a data pager using different modulation schemes and combined with a photopolymer as the holographic recording material.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modeling Diffractive Lenses Recording in Environmentally Friendly Photopolymer

  • Fernandez, Roberto
  • Navarro-Fuster, Víctor
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The improvements made in diffusion models simulating phase image recording in photopolymers enable the optimization of a wide range of complex diffractive optical elements (DOEs), while the miniaturization of spatial light modulators makes it possible to generate both symmetric and non-symmetric DOEs. In addition, there is increasing interest in the design of new friendly recording materials. In this respect, photopolymers are a promising material due to their optical properties. In this paper, we show a procedure to record diffractive spherical lenses using a nontoxic optimized photopolymer. To achieve this goal, we followed three steps: first, the chemical optimization for DOE recording; second, the recording material characterization to be simulated by a three-dimensional diffusion model; and third, the evaluation of the coverplating for the conservation of the DOE.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Influence of 4,4’-azobis (4-cyanopentanoic acid) in Transmission and Reflection Gratings Stored in a PVA/AA Photopolymer

  • Fernandez-Varo, Helena
  • Fuentes Rosillo, Rosa
  • Beléndez, Augusto
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Fernandez-Varo, Helena|||/items/3d7c6657-f6f2-484d-9642-a695151a4f72
  • Fuentes Rosillo, Rosa|||/items/a0c86f80-c103-4701-b066-421ea008e33c
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Holographic transmission gratings with a spatial frequency of 2658 lines/mm and reflection gratings with a spatial frequency of 4553 lines/mm were stored in a polyvinyl alcohol (PVA)/acrylamide (AA) based photopolymer. This material can reach diffraction efficiencies close to 100% for spatial frequencies about 1000 lines/mm. However, for higher spatial frequencies, the diffraction efficiency decreases considerably as the spatial frequency increases. To enhance the material response at high spatial frequencies, a chain transfer agent, the 4,4’-azobis (4-cyanopentanoic acid), ACPA, is added to the composition of the material. Different concentrations of ACPA are incorporated into the main composition of the photopolymer to find the concentration value that provides the highest diffraction efficiency. Moreover, the refractive index modulation and the optical thickness of the transmission and reflection gratings were obtained, evaluated and compared to procure more information about the influence of the ACPA on them.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Optimization of Photopolymer Materials for the Fabrication of a Holographic Waveguide

  • Neipp, Cristian
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Alvarez, Mariela L.
  • Bleda, Sergio
  • Ortuño, Manuel
  • Gallego, Sergi
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
In this work, we present a method of manufacturing an optical see-through display based on a holographic waveguide with transmission holograms that couple the incident light between air and the glass substrate, accomplishing total internal reflection. The holograms (slanted transmission gratings with a spatial frequency of 1700 lines/mm) were recorded on a polyvinyl alcohol acrylamide (PVA/AA) photopolymer. We will also show that the addition of N,N′-methylene-bis-acrylamide (BMA) to the composition of the photopolymer allows the achievement of the index modulations necessary to obtain high diffraction efficiencies in non-slanted diffraction gratings of 1000 and 2200 lines/mm, and also in slanted gratings of 1700 lines/mm (which are the base of the optical system proposed).
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

SF-FDTD analysis of a predictive physical model for parallel aligned liquid crystal devices

  • Márquez, Andrés
  • Francés, Jorge
  • Martínez Guardiola, Francisco Javier
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Calzado Estepa, Eva María
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Calzado Estepa, Eva María|||/items/5716b8f6-2afe-4da1-9308-a19d8791b41d
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Recently we demonstrated a novel and simplified model enabling to calculate the voltage dependent retardance provided by parallel aligned liquid crystal devices (PA-LCoS) for a very wide range of incidence angles and any wavelength in the visible. To our knowledge it represents the most simplified approach still showing predictive capability. Deeper insight into the physics behind the simplified model is necessary to understand if the parameters in the model are physically meaningful. Since the PA-LCoS is a black-box where we do not have information about the physical parameters of the device, we cannot perform this kind of analysis using the experimental retardance measurements. In this work we develop realistic simulations for the non-linear tilt of the liquid crystal director across the thickness of the liquid crystal layer in the PA devices. We consider these profiles to have a sine-like shape, which is a good approximation for typical ranges of applied voltage in commercial PA-LCoS microdisplays. For these simulations we develop a rigorous method based on the split-field finite difference time domain (SF-FDTD) technique which provides realistic retardance values. These values are used as the experimental measurements to which the simplified model is fitted. From this analysis we learn that the simplified model is very robust, providing unambiguous solutions when fitting its parameters. We also learn that two of the parameters in the model are physically meaningful, proving a useful reverse-engineering approach, with predictive capability, to probe into internal characteristics of the PA-LCoS device.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Polarimetric and diffractive evaluation of 3.74 micron pixel-size LCoS in the telecommunications C-band

  • Wang, Mi
  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Ye, Yabin
  • Zong, Liangjia
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Liquid-crystal on Silicon (LCoS) microdisplays are one of the competing technologies to implement wavelength selective switches (WSS) for optical telecommunications. Last generation LCoS, with more than 4 megapixels, have decreased pixel size to values smaller than 4 microns, what increases interpixel cross-talk effects such as fringing-field. We proceed with an experimental evaluation of a 3.74 micron pixel size parallel-aligned LCoS (PA-LCoS) device. At 1550 nm, for the first time we use time-average Stokes polarimetry to measure the retardance and its flicker magnitude as a function of voltage. We also verify the effect of the antireflection coating when we try to characterize the PA-LCoS out of the designed interval for the AR coating. Some preliminary results for the performance for binary gratings are also given, where the decrease of modulation range with the increase in spatial frequency is shown, together with some residual polarization effects.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Autoaprendizaje guiado por medio de una Wiki

  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Gallego, Sergi
  • Márquez, Andrés
  • Beléndez, Augusto
  • Fernández de Ávila, Susana
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
La web 2.0, o web colaborativa, lleva años implantada con gran éxito, ofreciendo grandes posibilidades en el mundo de la educación. En este trabajo describiremos la experiencia obtenida en el desarrollo de una wiki para el aprendizaje de una asignatura del Grado de Ingeniería en Telecomunicaciones. Esta experiencia puede ser extensible a casi cualquier tipo de asignatura, dada la flexibilidad que nos ofrece la wiki.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

The light that surrounds us

  • Beléndez, Augusto
  • Beléndez, Augusto
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
On 20 December 2013, the United Nations General Assembly 68th Session proclaimed 2015 as the International Year of Light and Light-based Technologies (IYL 2015) to highlight the fundamental role of light and its technologies in all human activities. Light is at the origin of life, it has inspired beauty, painters, poets, architects, ... and it is essential in photography, cinema, theatre or television, because there is no doubt that light affects the emotional response from the audience. Just look around us to verify that the numerous applications of light have revolutionized society through science, engineering, architecture, medicine, communications, culture, art and leisure. The industries that are related to light are real economic engines and Optics and Photonics are increasingly meeting the needs of humanity in multiple aspects. They give access to information, facilitate our communications, help to preserve cultural heritage, promote sustainable development and increase the health and social welfare. Light-based technologies are also providing new solutions to various global issues in areas such as such as energy, education, agriculture, environment and health.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

PVA/AA photopolymers and PA-LCoS devices combined for holographic data storage

  • Márquez, Andrés
  • Martínez Guardiola, Francisco Javier
  • Fernandez, Roberto
  • Gallego, Sergi
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We introduce a polyvinil alcohol/acrylamide (PVA/AA) photopolymer compound in a holographic memory testing platform to provide experimental results for storage and retrieval of information. We also investigate different codification schemes for the data pages addressed onto the parallel-addressed liquid crystal on silicon (PA-LCoS) device, used as the data pager, such as binary intensity modulation (BIM), and hybrid-ternary modulation (HTM), and we will see that an actual approximation for HTM can be obtained with a PA-LCoS device. We will also evaluate the effect of the time fluctuations in the PA-LCoS microdisplays onto the BIM and HTM regimes. Good results in terms of signal-tonoise ratio and bit-error ratio are provided with the experimental system and using the PVA/AA photopolymer produced in our lab, thus showing its potential and interest for future research focused on this material with highly tunable properties. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Parámetros que modifican la intensidad de corriente eléctrica en materiales compuestos H-PDLC

  • Fenoll Gambín, Sandra
  • Ortuño, Manuel
  • Gallego, Sergi
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Diffractive optical elements recorded in different photopolymers

  • Fernandez, Roberto
  • Navarro-Fuster, Víctor
  • Gallego, Sergi
  • Márquez, Andrés
  • Neipp, Cristian
  • Francés, Jorge
  • Ortuño, Manuel
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
We have fabricated and characterized diffractive phase optical elements (DOEs) such as diffractive lenses or blazed gratings in three different photopolymers using a liquid crystal on silicon (LCoS) spatial light modulator as a master.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis of volume holograms using the technique of Green's tensor

  • Neipp, Cristian
  • Francés, Jorge
  • Gallego, Sergi
  • Bleda, Sergio
  • Alvarez, Mariela L.
  • Navarro-Fuster, Víctor
  • Márquez, Andrés
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Bleda, Sergio|||/items/d2b99c60-360f-4a4f-a712-934a01eea569
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The holographic storage of information is based on the interference of two waves: the reference wave and the object wave, the latter is generated by using a spatial light modulator, and in the case of applications of data storage this corresponds to a binary pattern of one and zeros. The interference pattern is recorded in a photosensitive medium (photopolymers, photographic emulsions, photorefractive, etc.), so that when illuminated by the reference wave the object wave is reproduced. In order to properly investigate the characteristics of the generated hologram it is necessary to adequately study the interaction of electromagnetic radiation with the recording medium. In this work we develop a completely vectorial formalism for solving the Helmholtz equation that allows investigation of electromagnetic dispersion in dielectric media in which the refractive index varies spatially. The method is based on the technique of Green's tensor and allows to correctly simulate the behavior of a volume hologram. This method is compared with the method of discrete dipoles and a formalism based on the first Born approximation to determine the intensity of light scattered by a volume hologram.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modeling parallel aligned liquid crystal devices

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Francés, Jorge
  • Navarro-Fuster, Víctor
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Francés, Jorge|||/items/dc8252c4-30fe-4a2f-a433-f7971329fcb1
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
The Parallel Aligned Liquid Crystal microdisplays (PA-LC) has become a widely used device for optics and photonics applications. In this work we propose a PA-LC model that allows us to predict the device performance in a wide range of incidence angles and for any wavelength in the visible. From a reduced amount of measurements we apply a reverse engineering process that reveals some important parameters related with the manufacturing of the device. This knowledge eases the design of our photonic application or experiment, and it serves us to analyze the physics and dynamics of PA-LC cells since we can infer the LC molecules tilt angle as a function of applied voltage.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Application of PA-LCoS Modulators in Multilevel Phase Elements and in Holographic Data Storage

  • Martínez Guardiola, Francisco Javier
  • Márquez, Andrés
  • Gallego, Sergi
  • Fernandez, Roberto
  • Fenoll Gambín, Sandra
  • Ortuño, Manuel
  • Neipp, Cristian
  • Alvarez, Mariela L.
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Alvarez, Mariela L.|||/items/0ea731c9-dfb8-49b3-8945-0f6bcb818068
  • Beléndez, Augusto
  • Fernandez, Roberto|||/items/ca9b5808-d6e3-44da-a2b8-6ace83cf0a56
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Martínez Guardiola, Francisco Javier|||/items/bb4886e8-e0c5-44ed-a65f-657fc4476156
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Neipp, Cristian|||/items/146ef9a7-9689-4bb1-ac10-757f1fc1de28
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Additives Type Schiff’s Base as Modifiers of the Optical Response in Holographic Polymer-Dispersed Liquid Crystals

  • Fenoll Gambín, Sandra
  • Navarro-Fuster, Víctor
  • Ortuño, Manuel
  • Serrano, Jose Luis
  • Márquez, Andrés
  • Gallego, Sergi
  • Pascual, Inmaculada
  • Beléndez, Augusto
  • Beléndez, Augusto
  • Gallego, Sergi|||/items/139b2e44-1c73-4762-beb6-b2bb46fd4e89
  • Márquez, Andrés|||/items/124ea25f-0096-4a92-b0d3-28227c2beec0
  • Navarro-Fuster, Víctor|||/items/b148fcc2-81b7-4996-b2b9-a644f9797703
  • Ortuño, Manuel|||/items/8e057b51-ffe0-423b-9680-d6cc35c5db7b
  • Pascual, Inmaculada|||/items/92c98ce9-90cc-48ed-b32a-5cc168a1ea92
  • Beléndez, Augusto|||/items/1ea7a525-ee45-4792-bd9a-a54f76963120
Schiff’s bases with specific π-electron system have been synthesized and used as additives in holographic polymer-dispersed liquid crystals. It was observed that these substances modify different parameters such as current intensity, voltage, and diffracted light intensity. In addition, the maximum diffraction efficiency obtained in the reconstruction of the holograms is related to the additive molecule. We propose a relationship between this behavior and the molecular structure of these substances.