Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assembly of clathrates from tetrahedral patchy colloids with narrow patches

  • Noya, Eva G.
  • Zubieta, Itziar
  • Pine, David J.
  • Sciortino, F.
11 pags., 7 figs., 1 tab., Here, we revisit the assembly of colloidal tetrahedral patchy particles. Previous studies have shown that the crystallization of diamond from the fluid phase depends more critically on patch width than on the interaction range: Particles with patches narrower than 40° crystallize readily and those with wide patches form disordered glass states. We find that the crystalline structure formed from the fluid also depends on the patch width. Whereas particles with intermediate patches assemble into diamond (random stacking of cubic and hexagonal diamond layers), particles with narrow patches (with width ≈20° or less) crystallize frequently into clathrates. Free energy calculations show that clathrates are never (in the pressure-temperature plane) thermodynamically more stable than diamond. The assembly of clathrate structures is thus attributed to kinetic factors that originate from the thermodynamic stabilization of pentagonal rings with respect to hexagonal ones as patches become more directional. These pentagonal rings present in the fluid phase assemble into sII clathrate or into large clusters containing 100 particles and exhibiting icosahedral symmetry. These clusters then grow by interpenetration. Still, the organization of these clusters into extended ordered structures was never observed in the simulations., This work was funded by the Agencia Estatal de Investigación and the Fondo Europeo de Desarrollo Regional (FEDER) under Grant Nos. FIS2015-72946-EXP (AEI) and FIS2017-89361-C3-2-P (AEI/FEDER, UE) and by MIUR-PRIN 2018 under Grant No. 2017Z55KCW
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Programming patchy particles to form complex periodic structures

  • Tracey, Daniel F.
  • Noya, Eva G.
  • Doye, Jonathan P. K.
12 pags; 6 figs., We introduce a scheme to design patchy particles so that a given target crystal is the global free-energy minimum at sufficiently low temperature. A key feature is a torsional component to the potential that only allows binding when particles have the correct relative orientations. In all examples studied, the target crystal structures readily assembled on annealing from a low-density fluid phase, albeit with the simpler target structures assembling more rapidly. The most complex example was a clathrate with 46 particles in its primitive unit cell. We also explored whether the structural information encoded in the particle interactions could be further reduced. For example, removing the torsional restrictions led to the assembly of an alternative crystal structure for the BC8-forming design, but the more complex clathrate design was still able to assemble because of the greater remaining specificity., D.F.T. is grateful for funding via the ESPRC Centre for Doctoral Training in Theory and Modelling in Chemical Sciences, under Grant No. EP/L015722/1. E.G.N. acknowledges funding from the Agencia Estatal de Investigación (AEI) and the Fondo Europeo de Desarrollo Regional (FEDER) under Grant Nos. FIS2015-72946-EXP(AEI) and FIS2017-89361-C3-2-P(AEI/FEDER,UE) and the European Unions Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Grant Agreement No. 734276.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nucleation of pseudo hard-spheres and dumbbells at moderate metastability: Appearance of A15 Frank-Kasper phase at intermediate elongations

  • Zubieta, Itziar
  • Vázquez del Saz, Miguel
  • Llombart, Pablo
  • Vega, Carlos
  • Noya, Eva G.
15 pags., 14 figs., 7 tabs., Crystal nucleation of repulsive hard-dumbbells from the sphere to the two tangent spheres limit is investigated at moderately high metastability by brute-force molecular dynamics simulations. Nucleation rates are in good agreement with previous simulations of hard-spheres and dumbbells. Icosahedral structures formed by twinned face-centred-cubic tetrahedra sharing five-fold symmetry axes and icosahedral centers are often found in spheres and dumbbells with either small (L/σ = 0.1 and 0.2) and large (L/σ = 1) elongations. These structures are incompatible with long range crystalline order but are able to survive up to quite large sizes. In contrast, at intermediate elongations (L/σ = 0.3), corresponding roughly to the bond length of molecular nitrogen, the fluid crystallizes into three distinct solid structures, namely, a low density plastic crystal, a hexagonal close-packed plastic crystal (with the same structure as β-N), and an A15 Frank-Kasper phase (cP8 structure corresponding to δ-N). At the lower pressures studied the hexagonal close packed plastic crystal is the most stable phase, but at the higher pressures the stable phase is an orientationally ordered solid designated as CP1 that is never spontaneously formed in our crystallization simulations., IZ was supported by a Garantía Juvenil contract from CSIC (with FEDER funds). This work was also funded by the Agencia Estatal de Investigación and the Fondo Europeo de Desarrollo Regional (FEDER) under Grant No. FIS2015-72946-EXP(AEI), FIS2017-89361-C3-2-P(AEI/FEDER,UE) and FIS2016-78117-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and fluctuations of the premelted liquid film of ice at the triple point

  • Benet, Jorge
  • Llombart, Pablo
  • Sanz, Eduardo
  • MacDowell, Luis G.
20 pags., 7 figs., 4 tabs., In this paper, we study the structure of the ice/vapour interface in the neighbourhood of the triple point for the TIP4P/2005 model. We probe the fluctuations of the ice/film and film/vapour surfaces that separate the liquid film from the coexisting bulk phases at basal, primary prismatic and secondary prismatic planes. The results are interpreted using a coupled sine Gordon plus Interface Hamiltonian model. At large length scales, the two bounding surfaces are correlated and behave as a single complex ice/vapour interface. For small length, on the contrary, the ice/film and film/vapour surfaces behave very much like independent ice/water and water/vapour interfaces. The study suggests that the basal facet of the TIP4P/2005 model is smooth, the prismatic facet is close to a roughening transition, and the secondary prismatic facet is rough. For the faceted basal face, our fluctuation analysis allows us to estimate the step free energy in good agreement with experiment. Our results allow for a quantitative characterisation of the extent to which the adsorbed quasi-liquid layer behaves as water and explains experimental observations which reveal similar activation energies for crystals grown in bulk vapour or bulk water., The authors also wish to thank the Agencia Estatal de Investigación and Fondo Europeo de Desarrollo Regional (FEDER) under grant FIS2017-89361-C3-2-P. P.L. wishes to acknowledge additional support under grant FIS2015-72946-EXP
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Programming patchy particles to form three-dimensional dodecagonal quasicrystals

  • Tracey, Daniel F.
  • Noya, Eva G.
  • Doye, Jonathan P. K.
10 pags., 6 figs., Model patchy particles have been shown to be able to form a wide variety of structures, including symmetric clusters, complex crystals, and even two-dimensional quasicrystals. Here, we investigate whether we can design patchy particles that form three-dimensional quasicrystals, in particular targeting a quasicrystal with dodecagonal symmetry that is made up of stacks of two-dimensional quasicrystalline layers. We obtain two designs that are able to form such a dodecagonal quasicrystal in annealing simulations. The first is a one-component system of seven-patch particles but with wide patches that allow them to adopt both seven- and eight-coordinated environments. The second is a ternary system that contains a mixture of seven- and eight-patch particles and is likely to be more realizable in experiments, for example, using DNA origami. One interesting feature of the first system is that the resulting quasicrystals very often contain a screw dislocation., D.F.T. acknowledges funding via the ESPRC Centre for Doctoral Training in Theory and Modelling in Chemical Sciences under Grant No. EP/L015722/1. E.G.N. acknowledges funding from the Agencia Estatal de Investigación (AEI) and the Fondo Europeo de Desarrollo Regional (FEDER) under Grant Nos. FIS2015-72946-EXP(AEI) and FIS2017-89361-C3-2- P(AEI/FEDER,UE) and the European Union’s Horizon 2020 Research and Innovation Programme under Marie SkłodowskaCurie Grant Agreement No. 734276. We acknowledge the use of the University of Oxford Advanced Research Computing (ARC) facility and the Cambridge Service for Data Driven Discovery (CSD3).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computational explorations in the space of one-component crystals

  • Doye, Jonathan P. K.
  • Noya, Eva G.
Commentary. -- 3 pags., 1 fig., descripción no proporcionada por scopus, E.G.N. acknowledges funding from the Agencia Estatal de Investigaci on under Grant FIS2015-72946-EXP(AEI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How to design an icosahedral quasicrystal through directional bonding

  • Noya, Eva G.
  • Wong, Chak Kui
  • Llombart, Pablo
  • Doye, Jonathan P. K.
8 pags., 4 figs., + 10 figs. ext., Icosahedral quasicrystals (IQCs) are materials that exhibit long-range order but lack periodicity in any direction. Although IQCs were the first reported quasicrystals, they have been experimentally observed only in metallic alloys, not in other materials. By contrast, quasicrystals with other symmetries (particularly dodecagonal) have now been found in several soft-matter systems. Here we introduce a class of IQCs built from model patchy colloids that could be realized experimentally using DNA origami particles. Our rational design strategy leads to systems that robustly assemble in simulations into a target IQC through directional bonding. This is illustrated for both body-centred and primitive IQCs, with the simplest systems involving just two particle types. The key design feature is the geometry of the interparticle interactions favouring the propagation of an icosahedral network of bonds, despite this leading to many particles not being fully bonded. As well as furnishing model systems in which to explore the fundamental physics of IQCs, our approach provides a potential route towards functional quasicrystalline materials., We are grateful for financial support from the Agencia Estatal de Investigación and the Fondo Europeo de Desarrollo Regional (FEDER) under grant numbers FIS2015-72946-EXP(AEI) and FIS2017-89361-C3-2-P(AEI/FEDER,UE) (to E.G.N.) and the Croucher Foundation (to C.K.W.). We acknowledge the use of the University of Oxford Advanced Research Computing (ARC) facility and the Cambridge Service for Data Driven Discovery (CSD3).