Pasar al contenido principal

Application of optic sensors in the structural health monitoring.

FJC2018-038071-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysing local failure scenarios to assess the robustness of steel truss-type bridges

  • Caredda, Giacomo|||0000-0002-6888-0409
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Porcu, M. Cristina
  • Bertolesi, Elisa
[EN] Many of the steel bridge collapses occur in truss-type bridges. This is, in fact, the focus of this study involving an assessment of the robustness of this type of structures based on an actual bridge that the authors had extensively monitored and controlled. Robustness was assessed by means of computer simulations of various Damage Sce- narios (DSs) to analyse the structural bridge capacity to efficiently activate Alternative Load Paths (ALPs). The computational models have been previously validated with the results of load tests on the bridge and a laboratory test on a full-scale bridge span. The DSs have considered a series of non-simultaneous failures in different ele- ments. The results indicate that the structure is capable of not triggering a disproportionate collapse after each of the DSs with the help of the efficient activation of ALPs that required the contribution of other elements with extra-strength capacity as well as from the superstructure and the joints working under bending moments. The results were used as the basis for practical recommendations for: i) the design of new steel bridges and the retrofit of existing ones and ii) monitoring the structure for the optimal position of sensors to predict local failures that could spread to the rest of the bridge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fatigue assessment of steel riveted railway bridges: Full-scale tests and analytical approach

  • Bertolesi, Elisa
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
[EN] This paper describes a double experimental and analytical study of the fatigue behaviour of the Quisi and Ferrandet Bridges, twin 170 m long steel railway bridges constructed between 1913 and 1915 with typical Pratt truss structures and riveted connections. These bridges are part of the Spanish national railway network connecting the towns of Alicante and Denia, one of the key networks in the Valencia Region (Spain). The experimental laboratory investigation involved fatigue testing in one of the ICITECH laboratories at the Universitat Politècnica de València of: (i) a full-scale bridge span and (ii) an upper cross beamfromthe Ferrandet Bridge. During the tests, Linear Variable Displacement Transducers (LVDTs) and Strain Gauge (SG) sensorswere used to capture the possible nucleation and propagation of fatigue cracks. Fatigue test carried out on the cross beam identified: (i) fatigue life of the critical detail, (ii) fatigue hot-spots along the cross beam and (iii) strain redistribution along the riveted element during crack growth. The experimental results from the full-scale bridge were adopted to calibrate an elastic numerical model of the whole structure, which was in turn used to estimate the Quisi Bridge's remaining fatigue life. The definition of the class of detail and remaining fatigue lifewere calculated by the S¿N curvesmethod, according to Eurocode 3, considering the available information on the bridges' loading histories.