Pasar al contenido principal

"Foldomas" Homo y hetero-oligomeros de amiloides funcionales y patológicos

FJC2021-047976-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality 13C-detected structural analysis of mass-limited amyloid samples using a CPMAS CryoProbe and moderate magnetic fields

  • Andrés-Campos, Sara
  • Titaux-Delgado, Gustavo A.
  • Escobedo-González, Fátima C.
  • Mompeán, Miguel
Solid-state NMR (SSNMR) of biomolecules typically requires several milligrams of sample to achieve sufficient sensitivity for multidimensional experiments, especially when relying on 13C detection. Recent developments in fast magic-angle spinning (MAS) and 1H-detected methods have enabled the use of submilligram samples in reduced-diameter rotors, but these approaches demand advanced hardware and often suffer from limited 1H chemical shift dispersion. Here, we demonstrate that a CPMAS CryoProbe enables the acquisition of high-quality 13C-detected 2D and 3D spectra from just ∼1.5 mg of uniformly labeled amyloid fibrils packed in a standard 3.2 mm rotor. As a proof of concept, we apply this approach to RIPK3, a key protein in immune signaling that forms functional amyloid assemblies. Using standard 3D experiments (NCACX and NCOCX), we obtain 13C and 15N backbone assignments and secondary structure information, despite the limited sample quantity and the use of only moderate magnetic fields. These findings highlight the potential of CPMAS CryoProbes to shift the paradigm in mass-limited SSNMR studies, from relying exclusively on 1H-detection and fast MAS to reembracing 13C-detected strategies., This work is funded by the European Union (ERC, 101042403 – BiFOLDOME, to M.M). Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. NMR experiments were performed in the “Manuel Rico” NMR Laboratory (LMR) of the Spanish National Research Council (CSIC), a node of the Spanish Large-Scale National Facility (ICTS R-LRB). G.A.T.-D and M. M. acknowledge FJC2021-047976-I and CNS2023-143741 grants funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D-Printed Device for Efficient Packing of Semisolid Samples in 3.2-mm Rotors Used in Cryoprobe Systems

  • Gelardo, Andrea
  • Titaux-Delgado, Gustavo A.
6 pages, 3 figures, We present a compact, 3D-printed device designed to facilitate the efficient packing of semisolid or highly viscous samples into 3.2-mm rotors compatible with cryogenic solid-state NMR probes. The tool enables sample loading by centrifugation under standard laboratory conditions, significantly improving packing reproducibility and minimizing sample loss. In contrast to previously reported designs for conventional rotors, this device is optimized for the expanded volume and geometrical constraints of 90-μL rotors used in the Bruker CPMAS cryoprobe. A complementary unloading tool is also described to recover samples or enable rotor reuse. Both tools are compatible with standard benchtop centrifuges and are fully customizable. Their implementation improves sample handling for biological or material samples with limited availability or challenging rheological properties. Open-access 3D design files are provided to support broad adoption and future adaptation to other rotor sizes or sample formats. These devices represent a scalable solution for routine use and may inspire further development of customized tools for challenging sample types., This work was supported by the European Union (ERC-BiFOLDOME), 101042403, and MCIN/AEI/10.13039/501100011033 and the EuropeanUnion Next Generation/PRTR, FJC2021- 047976-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Membrane charge primes the necroptotic kinase RIPK3 for amyloid assembly

  • Escobedo-González, Fátima C.
  • Gelardo, Andrea
  • Reimers, Alexandra
  • Polonio, Paula
  • Mompeán, Miguel
  • Titaux-Delgado, Gustavo A.
6 pages, 3 figures, Receptor-interacting protein kinase 3 (RIPK3) drives necroptosis by assembling into functional amyloid fibrils. Here we show that lipids modulate RIPK3 amyloidogenesis by stabilizing an aggregation-prone intermediate. While electrostatic repulsion maintains RIPK3 in a soluble state, charge compensation alone is not sufficient for fibril formation and hydrophobic contacts are required to initiate nucleation. Using solution-state NMR, fluorescence-based assays and polymer-encased lipid particles, we demonstrate that negatively charged membranes selectively recruit RIPK3 and restrict its conformational flexibility, accelerating aggregation. These findings reveal a membrane-guided mechanism for RIPK3 assembly and suggest that lipid surfaces, like those implicated in pathological amyloid formation, may modulate functional amyloidogenesis even in the absence of canonical necroptotic stimuli., This work is funded by the European Union (ERC, 101042403BiFOLDOME,toM.M). Views and opinions expressed are however those of the authors only and donot necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the grant ing authority can be held responsible for them.NMR experiments were performed in the “Manuel Rico” NMR Laboratory (LMR) of the Spanish National Research Council (CSIC), a node of the Spanish Large-Scale National Facility (ICTS R-LRB). G.A.T.-D., M.M., and P.P. acknowledge FJC2021-047976-I and CNS2023-143741 grants funded by MCIN/AEI/ 10.13039/501100011033 and European Union Next Generation EU/PRTR, and PIPF-2022/BIO-25611 funded by the Dept. of Education, Science and Universities from the Community of Madrid, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural basis for amyloid fibril assembly by the master cell-signaling regulator receptor-interacting protein kinase 1

  • Polonio, Paula
  • López-Alonso, Jorge P.
  • Jiang, Hanxing
  • Andrés-Campos, Sara
  • Escobedo-González, Fátima C.
  • Titaux-Delgado, Gustavo A.
  • Ubarretxena, Iban
  • Mompeán, Miguel
Amyloid fibrils can form biologically relevant functional assemblies. The RIP homotypic interaction motifs (RHIMs) in receptor-interacting protein kinases 1 and 3 (RIPK1 and RIPK3) orchestrate the formation of amyloid-like fibrils essential for propagating cell death signals. While the structures of human RIPK3 (hRIPK3) homomeric fibrils and RIPK1-RIPK3 heteromeric fibrils have been elucidated, the atomic structure of human RIPK1 (hRIPK1) homomeric fibrils has remained elusive. We present a high-resolution structure of hRIPK1 RHIM-mediated amyloid fibrils, determined using an integrative approach combining cryoprobe-detected solid-state nuclear magnetic resonance spectroscopy and cryo-electron microscopy. The fibrils adopt an N-shaped fold consisting of three β-sheets stabilized by hydrophobic interactions and hydrogen bonding. A key hydrogen bond between N545 and G542 closes the β2-β3 loop, resulting in denser side-chain packing compared to hRIPK3 homomeric fibrils. These findings provide structural insights into how hRIPK1 homomeric fibrils nucleate hRIPK3 recruitment and fibrillization during necroptosis, offering broader perspectives on the molecular principles governing RHIM-mediated amyloid assembly and functional amyloids., This work is funded by the European Union (ERC, 101042403 – BiFOLDOME, to M.M). G.T.A.-D. and P.P. acknowledge FJC2021-047976-I fellowships funded by MCIN/AEI/ 10.13039/501100011033 and European Union Next Generation EU/PRTR, and PIPF-2022/BIO-25611 funded by the Dept of Education, Science, and Universities from the Community of Madrid, respectively. S.A.-C. is grateful to the JAE PRE fellowship program (CSIC, grant reference JAEPR23068). This work has been supported by a grant PID2022-143177NB-I00 to I. U.-B from the Spanish Ministry of Science, Innovation and Universities. Cryo-EM was performed at the Basque Resource for Electron Microscopy located at Instituto Biofisika (UPV/EHU, CSIC), supported by the Department of Science, Universities and Innovation and the Innovation Fund of the Basque Government, with additional support from MCIN (Recovery, Transformation and Resilience Plan) and the Basque Government “Biotechnology Complementary Plan Applied to Health” with funding from European Union NextGenerationEU (PRTR-C17.I1; PRTR-C17.I01.P01.S13) (AAAA_ACG_AY_2539/22_05)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solution NMR reveals micelle-stabilized α-helical segments flanking the RIPK1 RHIM amyloid core

  • Polonio, Paula
  • Titaux-Delgado, Gustavo A.
  • Mompeán, Miguel
8 pages, 4 images, Receptor Interacting Protein Kinase 1 (RIP1 or RIPK1) can transition from a monomeric state to amyloid assemblies during cell signaling via a conserved RIP homotypic interaction motif (RHIM). Through RHIM-RHIM interactions, RIPK1 forms both homomeric and heteromeric amyloids implicated in programmed cell death, but solution-state characterization of unassembled RIPK1 is hindered by rapid aggregation. Building on our recent RIPK1 fibril structure, we designed an aggregation-slowing mutant (N545D) and show that two segments within RIPK1's disordered domain display nascent helical propensity under near-physiological pH conditions. SDS micelles further stabilize these helices and enable measurements on the wild-type sequence. Notably, analogous conditions do not reveal comparable α-helical populations in RIPK3, despite a conserved RHIM sequence and amyloid structure endpoint., This work is funded by the European Union (ERC, 101042403 – BiFOLDOME, to M.M) Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. NMR experiments were performed in the “Manuel Rico” NMR Laboratory (LMR) of the Spanish National Research Council (CSIC), a node of the Spanish Large-Scale National Facility (ICTS R-LRB). M.M, G.T.A.-D. and P.P. acknowledge CNS2023-143741, FJC2021-047976-I fellowships funded by MCIN/AEI/10.13039/501100011033 and European Union Next Generation EU/PRTR, and PIPF-2022/BIO-25611 funded by the Dept. of Education, Science and Universities from the Community of Madrid, respectively., Peer reviewed