Pasar al contenido principal

-

FJCI-2015-25741

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Juan de la Cierva Formación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSITAT JAUME I DE CASTELLO
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Benchmarking of useful phase change materials for a building application

  • Navarro, Lidia
  • Solé, Aran
  • Martín, Marc
  • Barreneche, Camila
  • Olivieri, Lorenzo
  • Tenorio Ríos, José Antonio
  • Cabeza, Luisa F.
Nowadays, there is an increasing interest in more efficient building materials and new technologies to accomplish the objectives defined by energy policies. The combination of energy efficient building designs and integration of renewable energies makes the use of thermal energy storage (TES) necessary. Within this context, the improvement of building envelopes by the use of phase change materials (PCM) has been widely studied. The PCM selection should fulfil the requirements of the specific application. In this study, a benchmarking of PCM available in the market was performed to undertake a material selection for a specific building application. The incorporation of PCM into a radiant wall technology present several requirements with especial interest on long-term thermal stability. A complete laboratory-scale characterization has been carried out considering the following properties: temperature of phase change, specific heat capacity, thermal conductivity, and stability., Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013–2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad. The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-2-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2017 SGR 1537 and 2017 SGR 188). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Camila Barreneche would like to thank ACCIO for her Grant TecnioSpring Plus TECSPR17-1-0071. Aran Solé would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva FJCI-2015-25741., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Tensile test on interlayer materials for laminated glass under diverse ageing conditions and strain rates

  • Centelles Soler, Xavier|||0000-0003-4173-4556
  • Martín Llop, Marc
  • Solé Garrigós, Aran
  • Castro Chicot, Josep Ramon
  • Cabeza Fabra, Luisa Fernanda
Laminated glass is obtained by bonding two or more glass layers with a polymeric interlayer. The coupling between glass layers depends on the shear stiffness of the interlayer. The mechanical and optical properties of the interlayer may be affected by weathering factors. Since interlayer materials are viscoelastic, the strain rate may also affect its stiffness and ultimate strength. In this paper, tensile tests are conducted on seven different polymeric films (PVB BG-R20, PVB DG-41, PVB ES, SentryGlas, EVASAFE, EVALAM 80, and TPU) at three different strain rates. The mechanical and optical properties of unaged specimens are compared with specimens exposed to thermal cycles, high temperatures, and moisture. The unaged specimens of PVB DG-41, PVB ES, and SentryGlas had the highest stiffness, EVALAM 80 and EVASAFE had the highest ductility, PVB and SentryGlas had the highest tensile strength, and EVALAM 80, EVASAFE, and TPU were less affected by ageing factors and strain rate., The work was partially funded by CRISTEC with CDTI funds (IDI-20160588). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.This work is partially supported by ICREA under the ICREA Academia programme. Xavier Centelles would like to thank University of Lleida for his research fellowship. Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tensile test on interlayer materials for laminated glass under diverse ageing conditions and strain rates

  • Centelles Soler, Xavier
  • Martín Llop, Marc
  • Solé Garrigós, Aran
  • Castro Chicot, Josep Ramon
  • Cabeza Fabra, Luisa Fernanda
Laminated glass is obtained by bonding two or more glass layers with a polymeric interlayer. The coupling between glass layers depends on the shear stiffness of the interlayer. The mechanical and optical properties of the interlayer may be affected by weathering factors. Since interlayer materials are viscoelastic, the strain rate may also affect its stiffness and ultimate strength. In this paper, tensile tests are conducted on seven different polymeric films (PVB BG-R20, PVB DG-41, PVB ES, SentryGlas, EVASAFE, EVALAM 80, and TPU) at three different strain rates. The mechanical and optical properties of unaged specimens are compared with specimens exposed to thermal cycles, high temperatures, and moisture. The unaged specimens of PVB DG-41, PVB ES, and SentryGlas had the highest stiffness, EVALAM 80 and EVASAFE had the highest ductility, PVB and SentryGlas had the highest tensile strength, and EVALAM 80, EVASAFE, and TPU were less affected by ageing factors and strain rate., The work was partially funded by CRISTEC with CDTI funds (IDI-20160588). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.This work is partially supported by ICREA under the ICREA Academia programme. Xavier Centelles would like to thank University of Lleida for his research fellowship. Aran Solé would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI-2015-25741., Peer Reviewed, Postprint (author's final draft)